Pull printk updates from Petr Mladek:
- There is a situation when early console is not deregistered because
the preferred one matches a wrong entry. It caused messages to appear
twice.
This is the 2nd attempt to fix it. The first one was wrong, see the
commit c6c7d83b9c ('Revert "console: don't prefer first registered
if DT specifies stdout-path"').
The fix is coupled with some small code clean up. Well, the console
registration code would deserve a big one. We need to think about it.
- Do not lose information about the preemtive context when the console
semaphore is re-taken.
- Do not block CPU hotplug when someone else is already pushing
messages to the console.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: fix double printing with earlycon
printk: rename selected_console -> preferred_console
printk: fix name/type/scope of preferred_console var
printk: Correctly handle preemption in console_unlock()
printk: use console_trylock() in console_cpu_notify()
All the console driver handling code lives in printk.c.
Move console_init() there as well so console support can still be used
when the TTY code is configured out. No logical changes from this patch.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a console was specified by ACPI SPCR table _and_ command line
parameters like "console=ttyAMA0" _and_ "earlycon" were specified,
then log messages appear twice.
The root cause is that the code traverses the list of specified
consoles (the `console_cmdline` array) and stops at the first match.
But it may happen that the same console is referred by the elements
of this array twice:
pl011,mmio,0x87e024000000,115200 -- from SPCR
ttyAMA0 -- from command line
but in this case `preferred_console` points to the second entry and
the flag CON_CONSDEV is not set, so bootconsole is not deregistered.
To fix that, introduce an invariant "The last non-braille console
is always the preferred one" on the entries of the console_cmdline
array. Then traverse it in reverse order to be sure that if
the console is preferred then it will be the first matching entry.
Introduce variable console_cmdline_cnt that keeps the number
of elements of the console_cmdline array (Petr Mladek). It helps
to get rid of the loop that searches for the end of this array.
Link: http://lkml.kernel.org/r/20170405202006.18234-1-aleksey.makarov@linaro.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The variable selected_console is set in __add_preferred_console()
to point to the last console parameter that was added to the
console_cmdline array.
Rename it to preferred_console so that the name reflects the usage.
Petr Mladek:
"[..] the selected_console/preferred_console
value is used to keep the console first in the console_drivers list.
IMHO, the main effect is that each line will first appear on this
console, see call_console_drivers(). But the message will still
appear also on all other enabled consoles. From this point,
the name "preferred" sounds better to me. More consoles
are selected (enabled) and only one is preferred (first)."
Link: http://lkml.kernel.org/r/20170315102854.1763-3-aleksey.makarov@linaro.org
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Suggested-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The variable preferred_console is used only inside register_console()
and its semantics is boolean. It is negative when no console has been
made preferred.
Make it static bool and rename to has_preferred.
Renaming was suggested by Peter Hurley
Link: http://lkml.kernel.org/r/20170315102854.1763-2-aleksey.makarov@linaro.org
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Some console drivers code calls console_conditional_schedule()
that looks at @console_may_schedule. The value must be cleared
when the drivers are called from console_unlock() with
interrupts disabled. But rescheduling is fine when the same
code is called, for example, from tty operations where the
console semaphore is taken via console_lock().
This is why @console_may_schedule is cleared before calling console
drivers. The original value is stored to decide if we could sleep
between lines.
Now, @console_may_schedule is not cleared when we call
console_trylock() and jump back to the "again" goto label.
This has become a problem, since the commit 6b97a20d3a
("printk: set may_schedule for some of console_trylock() callers").
@console_may_schedule might get enabled now.
There is also the opposite problem. console_lock() can be called
only from preemptive context. It can always enable scheduling in
the console code. But console_trylock() is not able to detect it
when CONFIG_PREEMPT_COUNT is disabled. Therefore we should use the
original @console_may_schedule value after re-acquiring
the console semaphore in console_unlock().
This patch solves both problems by moving the "again" goto label.
Alternative solution was to clear and restore the value around
call_console_drivers(). Then console_conditional_schedule() could
be used also inside console_unlock(). But there was a potential race
with console_flush_on_panic() as reported by Sergey Senozhatsky.
That function should be called only where there is only one CPU
and with interrupts disabled. But better be on the safe side
because stopping CPUs might fail.
Fixes: 6b97a20d3a ("printk: set may_schedule for some of console_trylock() callers")
Link: http://lkml.kernel.org/r/1490372045-22288-1-git-send-email-pmladek@suse.com
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is no need to always call blocking console_lock() in
console_cpu_notify(), it's quite possible that console_sem can
be locked by other CPU on the system, either already printing
or soon to begin printing the messages. console_lock() in this
case can simply block CPU hotplug for unknown period of time
(console_unlock() is time unbound). Not that hotplug is very
fast, but still, with other CPUs being online and doing
printk() console_cpu_notify() can stuck.
Use console_trylock() instead and opt-out if console_sem is
already acquired from another CPU, since that CPU will do
the printing for us.
Link: http://lkml.kernel.org/r/20170121104729.8585-1-sergey.senozhatsky@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull printk updates from Petr Mladek:
- Add Petr Mladek, Sergey Senozhatsky as printk maintainers, and Steven
Rostedt as the printk reviewer. This idea came up after the
discussion about printk issues at Kernel Summit. It was formulated
and discussed at lkml[1].
- Extend a lock-less NMI per-cpu buffers idea to handle recursive
printk() calls by Sergey Senozhatsky[2]. It is the first step in
sanitizing printk as discussed at Kernel Summit.
The change allows to see messages that would normally get ignored or
would cause a deadlock.
Also it allows to enable lockdep in printk(). This already paid off.
The testing in linux-next helped to discover two old problems that
were hidden before[3][4].
- Remove unused parameter by Sergey Senozhatsky. Clean up after a past
change.
[1] http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
[2] http://lkml.kernel.org/r/20161227141611.940-1-sergey.senozhatsky@gmail.com
[3] http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
[4] http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop call_console_drivers() unused param
printk: convert the rest to printk-safe
printk: remove zap_locks() function
printk: use printk_safe buffers in printk
printk: report lost messages in printk safe/nmi contexts
printk: always use deferred printk when flush printk_safe lines
printk: introduce per-cpu safe_print seq buffer
printk: rename nmi.c and exported api
printk: use vprintk_func in vprintk()
MAINTAINERS: Add printk maintainers
Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:
hw-breakpoint: Failed to enable monitor mode on CPU 0.
hw-breakpoint: CPU 0 failed to disable vector catch
===============================
[ ERR: suspicious RCU usage. ]
4.10.0-rc8-next-20170215+ #119 Not tainted
-------------------------------
./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by swapper/0/0:
#0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
#1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
Hardware name: Generic OMAP4 (Flattened Device Tree)
console_unlock
vprintk_emit
vprintk_default
printk
reset_ctrl_regs
dbg_cpu_pm_notify
notifier_call_chain
cpu_pm_exit
omap_enter_idle_coupled
cpuidle_enter_state
cpuidle_enter_state_coupled
do_idle
cpu_startup_entry
start_kernel
This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".
Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We do suppress_message_printing() check before we call
call_console_drivers() now, so `level' param is not needed
anymore.
Link: http://lkml.kernel.org/r/20161224140902.1962-2-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This patch converts the rest of logbuf users (which are
out of printk recursion case, but can deadlock in printk).
To make printk-safe usage easier the patch introduces 4
helper macros:
- logbuf_lock_irq()/logbuf_unlock_irq()
lock/unlock the logbuf lock and disable/enable local IRQ
- logbuf_lock_irqsave(flags)/logbuf_unlock_irqrestore(flags)
lock/unlock the logbuf lock and saves/restores local IRQ state
Link: http://lkml.kernel.org/r/20161227141611.940-9-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
We use printk-safe now which makes printk-recursion detection code
in vprintk_emit() unreachable. The tricky thing here is that, apart
from detecting and reporting printk recursions, that code also used
to zap_locks() in case of panic() from the same CPU. However,
zap_locks() does not look to be needed anymore:
1) Since commit 08d78658f3 ("panic: release stale console lock to
always get the logbuf printed out") panic flushing of `logbuf' to
console ignores the state of `console_sem' by doing
panic()
console_trylock();
console_unlock();
2) Since commit cf9b1106c8 ("printk/nmi: flush NMI messages on the
system panic") panic attempts to zap the `logbuf_lock' spin_lock to
successfully flush nmi messages to `logbuf'.
Basically, it seems that we either already do what zap_locks() used to
do but in other places or we ignore the state of the lock. The only
reaming difference is that we don't re-init the console semaphore in
printk_safe_flush_on_panic(), but this is not necessary because we
don't call console drivers from printk_safe_flush_on_panic() due to
the fact that we are using a deferred printk() version (as was
suggested by Petr Mladek).
Link: http://lkml.kernel.org/r/20161227141611.940-8-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use printk_safe per-CPU buffers in printk recursion-prone blocks:
-- around logbuf_lock protected sections in vprintk_emit() and
console_unlock()
-- around down_trylock_console_sem() and up_console_sem()
Note that this solution addresses deadlocks caused by printk()
recursive calls only. That is vprintk_emit() and console_unlock().
The rest will be converted in a followup patch.
Another thing to note is that we now keep lockdep enabled in printk,
because we are protected against the printk recursion caused by
lockdep in vprintk_emit() by the printk-safe mechanism - we first
switch to per-CPU buffers and only then access the deadlock-prone
locks.
Examples:
1) printk() from logbuf_lock spin_lock section
Assume the following code:
printk()
raw_spin_lock(&logbuf_lock);
WARN_ON(1);
raw_spin_unlock(&logbuf_lock);
which now produces:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 366 at kernel/printk/printk.c:1811 vprintk_emit
CPU: 0 PID: 366 Comm: bash
Call Trace:
warn_slowpath_null+0x1d/0x1f
vprintk_emit+0x1cd/0x438
vprintk_default+0x1d/0x1f
printk+0x48/0x50
[..]
2) printk() from semaphore sem->lock spin_lock section
Assume the following code
printk()
console_trylock()
down_trylock()
raw_spin_lock_irqsave(&sem->lock, flags);
WARN_ON(1);
raw_spin_unlock_irqrestore(&sem->lock, flags);
which now produces:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 363 at kernel/locking/semaphore.c:141 down_trylock
CPU: 1 PID: 363 Comm: bash
Call Trace:
warn_slowpath_null+0x1d/0x1f
down_trylock+0x3d/0x62
? vprintk_emit+0x3f9/0x414
console_trylock+0x31/0xeb
vprintk_emit+0x3f9/0x414
vprintk_default+0x1d/0x1f
printk+0x48/0x50
[..]
3) printk() from console_unlock()
Assume the following code:
printk()
console_unlock()
raw_spin_lock(&logbuf_lock);
WARN_ON(1);
raw_spin_unlock(&logbuf_lock);
which now produces:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 329 at kernel/printk/printk.c:2384 console_unlock
CPU: 1 PID: 329 Comm: bash
Call Trace:
warn_slowpath_null+0x18/0x1a
console_unlock+0x12d/0x559
? trace_hardirqs_on_caller+0x16d/0x189
? trace_hardirqs_on+0xd/0xf
vprintk_emit+0x363/0x374
vprintk_default+0x18/0x1a
printk+0x43/0x4b
[..]
4) printk() from try_to_wake_up()
Assume the following code:
printk()
console_unlock()
up()
try_to_wake_up()
raw_spin_lock_irqsave(&p->pi_lock, flags);
WARN_ON(1);
raw_spin_unlock_irqrestore(&p->pi_lock, flags);
which now produces:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 363 at kernel/sched/core.c:2028 try_to_wake_up
CPU: 3 PID: 363 Comm: bash
Call Trace:
warn_slowpath_null+0x1d/0x1f
try_to_wake_up+0x7f/0x4f7
wake_up_process+0x15/0x17
__up.isra.0+0x56/0x63
up+0x32/0x42
__up_console_sem+0x37/0x55
console_unlock+0x21e/0x4c2
vprintk_emit+0x41c/0x462
vprintk_default+0x1d/0x1f
printk+0x48/0x50
[..]
5) printk() from call_console_drivers()
Assume the following code:
printk()
console_unlock()
call_console_drivers()
...
WARN_ON(1);
which now produces:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 305 at kernel/printk/printk.c:1604 call_console_drivers
CPU: 2 PID: 305 Comm: bash
Call Trace:
warn_slowpath_null+0x18/0x1a
call_console_drivers.isra.6.constprop.16+0x3a/0xb0
console_unlock+0x471/0x48e
vprintk_emit+0x1f4/0x206
vprintk_default+0x18/0x1a
vprintk_func+0x6e/0x70
printk+0x3e/0x46
[..]
6) unsupported placeholder in printk() format now prints an actual
warning from vscnprintf(), instead of
'BUG: recent printk recursion!'.
------------[ cut here ]------------
WARNING: CPU: 5 PID: 337 at lib/vsprintf.c:1900 format_decode
Please remove unsupported %
in format string
CPU: 5 PID: 337 Comm: bash
Call Trace:
dump_stack+0x4f/0x65
__warn+0xc2/0xdd
warn_slowpath_fmt+0x4b/0x53
format_decode+0x22c/0x308
vsnprintf+0x89/0x3b7
vscnprintf+0xd/0x26
vprintk_emit+0xb4/0x238
vprintk_default+0x1d/0x1f
vprintk_func+0x6c/0x73
printk+0x43/0x4b
[..]
Link: http://lkml.kernel.org/r/20161227141611.940-7-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Account lost messages in pritk-safe and printk-safe-nmi
contexts and report those numbers during printk_safe_flush().
The patch also moves lost message counter to struct
`printk_safe_seq_buf' instead of having dedicated static
counters - this simplifies the code.
Link: http://lkml.kernel.org/r/20161227141611.940-6-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This patch extends the idea of NMI per-cpu buffers to regions
that may cause recursive printk() calls and possible deadlocks.
Namely, printk() can't handle printk calls from schedule code
or printk() calls from lock debugging code (spin_dump() for instance);
because those may be called with `sem->lock' already taken or any
other `critical' locks (p->pi_lock, etc.). An example of deadlock
can be
vprintk_emit()
console_unlock()
up() << raw_spin_lock_irqsave(&sem->lock, flags);
wake_up_process()
try_to_wake_up()
ttwu_queue()
ttwu_activate()
activate_task()
enqueue_task()
enqueue_task_fair()
cfs_rq_of()
task_of()
WARN_ON_ONCE(!entity_is_task(se))
vprintk_emit()
console_trylock()
down_trylock()
raw_spin_lock_irqsave(&sem->lock, flags)
^^^^ deadlock
and some other cases.
Just like in NMI implementation, the solution uses a per-cpu
`printk_func' pointer to 'redirect' printk() calls to a 'safe'
callback, that store messages in a per-cpu buffer and flushes
them back to logbuf buffer later.
Usage example:
printk()
printk_safe_enter_irqsave(flags)
//
// any printk() call from here will endup in vprintk_safe(),
// that stores messages in a special per-CPU buffer.
//
printk_safe_exit_irqrestore(flags)
The 'redirection' mechanism, though, has been reworked, as suggested
by Petr Mladek. Instead of using a per-cpu @print_func callback we now
keep a per-cpu printk-context variable and call either default or nmi
vprintk function depending on its value. printk_nmi_entrer/exit and
printk_safe_enter/exit, thus, just set/celar corresponding bits in
printk-context functions.
The patch only adds printk_safe support, we don't use it yet.
Link: http://lkml.kernel.org/r/20161227141611.940-4-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
vprintk(), just like printk(), better be using per-cpu printk_func
instead of direct vprintk_emit() call. Just in case if vprintk()
will ever be called from NMI, or from any other context that can
deadlock in printk().
Link: http://lkml.kernel.org/r/20161227141611.940-2-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
If CONFIG_PRINTK=n:
kernel/printk/printk.c:1893: warning: ‘cont’ defined but not used
Note that there are actually two different struct cont definitions and
objects: the first one is used if CONFIG_PRINTK=y, the second one became
unused by removing console_cont_flush().
Fixes: 5c2992ee7f ("printk: remove console flushing special cases for partial buffered lines")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Petr Mladek <pmladek@suse.com>
[ I do the occasional "allnoconfig" builds, but apparently not often
enough - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It actively hurts proper merging, and makes for a lot of special cases.
There was a good(ish) reason for doing it originally, but it's getting
too painful to maintain. And most of the original reasons for it are
long gone.
So instead of having special code to flush partial lines to the console
(as opposed to the record buffers), do _all_ the console writing from
the record buffer, and be done with it.
If an oops happens (or some other synchronous event), we will flush the
partial lines due to the oops printing activity, so this does not affect
that. It does mean that if you have a completely hung machine, a
partial preceding line may not have been printed out.
That was some of the original reason for this complexity, in fact, back
when we used to test for the historical i386 "halt" instruction problem
by doing
pr_info("Checking 'hlt' instruction... ");
if (!boot_cpu_data.hlt_works_ok) {
pr_cont("disabled\n");
return;
}
halt();
halt();
halt();
halt();
pr_cont("OK\n");
and that model no longer works (it the 'hlt' instruction kills the
machine, the partial line won't have been flushed, so you won't even see
it).
Of course, that was also back in the days when people actually had
textual console output rather than a graphical splash-screen at bootup.
How times change..
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The record logging code looks at the previous record flags in various
ways, and they are all wrong.
You can't use the previous record flags to determine anything about the
next record, because they may simply not be related. In particular, the
reason the previous record was a continuation record may well be exactly
_because_ the new record was printed by a different process, which is
why the previous record was flushed.
So all those games are simply wrong, and make the code hard to
understand (because the code fundamentally cdoes not make sense).
So remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kdb_trap_printk allows to pass normal printk() messages to kdb via
vkdb_printk(). For example, it is used to get backtrace using the
classic show_stack(), see kdb_show_stack().
vkdb_printf() tries to avoid a potential infinite loop by disabling the
trap. But this approach is racy, for example:
CPU1 CPU2
vkdb_printf()
// assume that kdb_trap_printk == 0
saved_trap_printk = kdb_trap_printk;
kdb_trap_printk = 0;
kdb_show_stack()
kdb_trap_printk++;
Problem1: Now, a nested printk() on CPU0 calls vkdb_printf()
even when it should have been disabled. It will not
cause a deadlock but...
// using the outdated saved value: 0
kdb_trap_printk = saved_trap_printk;
kdb_trap_printk--;
Problem2: Now, kdb_trap_printk == -1 and will stay like this.
It means that all messages will get passed to kdb from
now on.
This patch removes the racy saved_trap_printk handling. Instead, the
recursion is prevented by a check for the locked CPU.
The solution is still kind of racy. A non-related printk(), from
another process, might get trapped by vkdb_printf(). And the wanted
printk() might not get trapped because kdb_printf_cpu is assigned. But
this problem existed even with the original code.
A proper solution would be to get_cpu() before setting kdb_trap_printk
and trap messages only from this CPU. I am not sure if it is worth the
effort, though.
In fact, the race is very theoretical. When kdb is running any of the
commands that use kdb_trap_printk there is a single active CPU and the
other CPUs should be in a holding pen inside kgdb_cpu_enter().
The only time this is violated is when there is a timeout waiting for
the other CPUs to report to the holding pen.
Finally, note that the situation is a bit schizophrenic. vkdb_printf()
explicitly allows recursion but only from KDB code that calls
kdb_printf() directly. On the other hand, the generic printk()
recursion is not allowed because it might cause an infinite loop. This
is why we could not hide the decision inside vkdb_printf() easily.
Link: http://lkml.kernel.org/r/1480412276-16690-4-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull smp hotplug updates from Thomas Gleixner:
"This is the final round of converting the notifier mess to the state
machine. The removal of the notifiers and the related infrastructure
will happen around rc1, as there are conversions outstanding in other
trees.
The whole exercise removed about 2000 lines of code in total and in
course of the conversion several dozen bugs got fixed. The new
mechanism allows to test almost every hotplug step standalone, so
usage sites can exercise all transitions extensively.
There is more room for improvement, like integrating all the
pointlessly different architecture mechanisms of synchronizing,
setting cpus online etc into the core code"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
tracing/rb: Init the CPU mask on allocation
soc/fsl/qbman: Convert to hotplug state machine
soc/fsl/qbman: Convert to hotplug state machine
zram: Convert to hotplug state machine
KVM/PPC/Book3S HV: Convert to hotplug state machine
arm64/cpuinfo: Convert to hotplug state machine
arm64/cpuinfo: Make hotplug notifier symmetric
mm/compaction: Convert to hotplug state machine
iommu/vt-d: Convert to hotplug state machine
mm/zswap: Convert pool to hotplug state machine
mm/zswap: Convert dst-mem to hotplug state machine
mm/zsmalloc: Convert to hotplug state machine
mm/vmstat: Convert to hotplug state machine
mm/vmstat: Avoid on each online CPU loops
mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
tracing/rb: Convert to hotplug state machine
oprofile/nmi timer: Convert to hotplug state machine
net/iucv: Use explicit clean up labels in iucv_init()
x86/pci/amd-bus: Convert to hotplug state machine
x86/oprofile/nmi: Convert to hotplug state machine
...
copy_from_iter_full(), copy_from_iter_full_nocache() and
csum_and_copy_from_iter_full() - counterparts of copy_from_iter()
et.al., advancing iterator only in case of successful full copy
and returning whether it had been successful or not.
Convert some obvious users. *NOTE* - do not blindly assume that
something is a good candidate for those unless you are sure that
not advancing iov_iter in failure case is the right thing in
this case. Anything that does short read/short write kind of
stuff (or is in a loop, etc.) is unlikely to be a good one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The recent conversion of the console hotplug notifier to the state machine
missed the fact, that the notifier only operated on the non frozen
transitions. As a consequence the console_lock/unlock() pair is also
invoked during suspend, which results in a lockdep warning.
Restore the previous state by making the lock/unlock conditional on
!tasks_frozen.
Fixes: 90b14889d2 ("kernel/printk: Convert to hotplug state machine")
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611171729320.3645@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This reverts commit bfd8d3f23b.
It turns out that this flushes things much too aggressiverly, and causes
lines to break up when the system logger races with new continuation
lines being printed.
There's a pending patch to make printk() flushing much more
straightforward, but it's too invasive for 4.9, so in the meantime let's
just not make the system message logging flush continuation lines.
They'll be flushed by the final newline anyway.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path").
The reverted commit changes existing behavior on which many ARM boards
rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have
both a video output and a serial console. Depending on whether the user
is using the device as a more regular computer; or as a headless device
we need to have the console on either one or the other.
Many users rely on the kernel behavior of the console being present on
both outputs, before the reverted commit the console setup with no
console= kernel arguments on an ARM board which sets stdout-path in dt
would look like this:
[root@localhost ~]# cat /proc/consoles
ttyS0 -W- (EC p a) 4:64
tty0 -WU (E p ) 4:1
Where as after the reverted commit, it looks like this:
[root@localhost ~]# cat /proc/consoles
ttyS0 -W- (EC p a) 4:64
This commit reverts commit 05fd007e46 ("console: don't prefer first
registered if DT specifies stdout-path") restoring the original
behavior.
Fixes: 05fd007e46 ("console: don't prefer first registered if DT specifies stdout-path")
Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-3-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have a fairly common pattern where you print several things as
continuations on one single line in a loop, and then at the end you do
printk(KERN_CONT "\n");
to flush the buffered output.
But if the output was flushed by something else (concurrent printk
activity, or just system logging), we don't want that final flushing to
just print an empty line.
So just suppress empty continuation lines when they couldn't be merged
into the line they are a continuation of.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge my system logging cleanups, triggered by the broken '\n' patches.
The line continuation handling has been broken basically forever, and
the code to handle the system log records was both confusing and
dubious. And it would do entirely the wrong thing unless you always had
a terminating newline, partly because it couldn't actually see whether a
message was marked KERN_CONT or not (but partly because the LOG_CONT
handling in the recording code was rather confusing too).
This re-introduces a real semantically meaningful KERN_CONT, and fixes
the few places I noticed where it was missing. There are probably more
missing cases, since KERN_CONT hasn't actually had any semantic meaning
for at least four years (other than the checkpatch meaning of "no log
level necessary, this is a continuation line").
This also allows the combination of KERN_CONT and a log level. In that
case the log level will be ignored if the merging with a previous line
is successful, but if a new record is needed, that new record will now
get the right log level.
That also means that you can at least in theory combine KERN_CONT with
the "pr_info()" style helpers, although any use of pr_fmt() prefixing
would make that just result in a mess, of course (the prefix would end
up in the middle of a continuing line).
* printk-cleanups:
printk: make reading the kernel log flush pending lines
printk: re-organize log_output() to be more legible
printk: split out core logging code into helper function
printk: reinstate KERN_CONT for printing continuation lines
That will mean that any possible subsequent continuation will now be
broken up onto a line of its own (since reading the log has finalized
the beginning og the line), but if user space has activated system
logging (or if there's a kernel message dump going on) that is the right
thing to do.
And now that we actually get the continuation flags _right_ for this
all, the user space logger that is reading the kernel messages can
actually see the continuation marker. Not that anybody seems to really
bother with it (or care), but in theory user space can do its own
message stitching.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid some duplicate logic now that we can return early, and update the
comments for the new LOG_CONT world order.
This also stops the continuation flushing from just using random record
flags for the flushing action, instead taking the flags from the proper
original line and updating them as we add continuations to it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code that actually decides how to log the message (whether to put it
directly into the record log, whether to append it to an existing
buffered log, or whether to start a new buffered log) is fairly
non-obvious code in the middle of the vprintk_emit() function.
Splitting that code up into a helper function makes it easier to
understand, but perhaps more importantly also allows for the code to
just return early out of the helper function once it has made the
decision about where the new log content goes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Long long ago the kernel log buffer was a buffered stream of bytes, very
much like stdio in user space. It supported log levels by scanning the
stream and noticing the log level markers at the beginning of each line,
but if you wanted to print a partial line in multiple chunks, you just
did multiple printk() calls, and it just automatically worked.
Except when it didn't, and you had very confusing output when different
lines got all mixed up with each other. Then you got fragment lines
mixing with each other, or with non-fragment lines, because it was
traditionally impossible to tell whether a printk() call was a
continuation or not.
To at least help clarify the issue of continuation lines, we added a
KERN_CONT marker back in 2007 to mark continuation lines:
4749252776 ("printk: add KERN_CONT annotation").
That continuation marker was initially an empty string, and didn't
actuall make any semantic difference. But it at least made it possible
to annotate the source code, and have check-patch notice that a printk()
didn't need or want a log level marker, because it was a continuation of
a previous line.
To avoid the ambiguity between a continuation line that had that
KERN_CONT marker, and a printk with no level information at all, we then
in 2009 made KERN_CONT be a real log level marker which meant that we
could now reliably tell the difference between the two cases.
5fd29d6ccb ("printk: clean up handling of log-levels and newlines")
and we could take advantage of that to make sure we didn't mix up
continuation lines with lines that just didn't have any loglevel at all.
Then, in 2012, the kernel log buffer was changed to be a "record" based
log, where each line was a record that has a loglevel and a timestamp.
You can see the beginning of that conversion in commits
e11fea92e1 ("kmsg: export printk records to the /dev/kmsg interface")
7ff9554bb5 ("printk: convert byte-buffer to variable-length record buffer")
with a number of follow-up commits to fix some painful fallout from that
conversion. Over all, it took a couple of months to sort out most of
it. But the upside was that you could have concurrent readers (and
writers) of the kernel log and not have lines with mixed output in them.
And one particular pain-point for the record-based kernel logging was
exactly the fragmentary lines that are generated in smaller chunks. In
order to still log them as one recrod, the continuation lines need to be
attached to the previous record properly.
However the explicit continuation record marker that is actually useful
for this exact case was actually removed in aroundm the same time by commit
61e99ab8e3 ("printk: remove the now unnecessary "C" annotation for KERN_CONT")
due to the incorrect belief that KERN_CONT wasn't meaningful. The
ambiguity between "is this a continuation line" or "is this a plain
printk with no log level information" was reintroduced, and in fact
became an even bigger pain point because there was now the whole
record-level merging of kernel messages going on.
This patch reinstates the KERN_CONT as a real non-empty string marker,
so that the ambiguity is fixed once again.
But it's not a plain revert of that original removal: in the four years
since we made KERN_CONT an empty string again, not only has the format
of the log level markers changed, we've also had some usage changes in
this area.
For example, some ACPI code seems to use KERN_CONT _together_ with a log
level, and now uses both the KERN_CONT marker and (for example) a
KERN_INFO marker to show that it's an informational continuation of a
line.
Which is actually not a bad idea - if the continuation line cannot be
attached to its predecessor, without the log level information we don't
know what log level to assign to it (and we traditionally just assigned
it the default loglevel). So having both a log level and the KERN_CONT
marker is not necessarily a bad idea, but it does mean that we need to
actually iterate over potentially multiple markers, rather than just a
single one.
Also, since KERN_CONT was still conceptually needed, and encouraged, but
didn't actually _do_ anything, we've also had the reverse problem:
rather than having too many annotations it has too few, and there is bit
rot with code that no longer marks the continuation lines with the
KERN_CONT marker.
So this patch not only re-instates the non-empty KERN_CONT marker, it
also fixes up the cases of bit-rot I noticed in my own logs.
There are probably other cases where KERN_CONT will be needed to be
added, either because it is new code that never dealt with the need for
KERN_CONT, or old code that has bitrotted without anybody noticing.
That said, we should strive to avoid the need for KERN_CONT. It does
result in real problems for logging, and should generally not be seen as
a good feature. If we some day can get rid of the feature entirely,
because nobody does any fragmented printk calls, that would be lovely.
But until that point, let's at mark the code that relies on the hacky
multi-fragment kernel printk's. Not only does it avoid the ambiguity,
it also annotates code as "maybe this would be good to fix some day".
(That said, particularly during single-threaded bootup, the downsides of
KERN_CONT are very limited. Things get much hairier when you have
multiple threads going on and user level reading and writing logs too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a device tree specifies a preferred device for kernel console output
via the stdout-path or linux,stdout-path chosen node properties or the
stdout alias then the kernel ought to honor it & output the kernel
console to that device. As it stands, this isn't the case. Whilst we
parse the stdout-path properties & set an of_stdout variable from
of_alias_scan(), and use that from of_console_check() to determine
whether to add a console device as a preferred console whilst
registering it, we also prefer the first registered console if no other
has been selected at the time of its registration.
This means that if a console other than the one the device tree selects
via stdout-path is registered first, we will switch to using it & when
the stdout-path console is later registered the call to
add_preferred_console() via of_console_check() is too late to do
anything useful. In practice this seems to mean that we switch to the
dummy console device fairly early & see no further console output:
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [ns16550a0] disabled
Fix this by not automatically preferring the first registered console if
one is specified by the device tree. This allows consoles to be
registered but not enabled, and once the driver for the console selected
by stdout-path calls of_console_check() the driver will be added to the
list of preferred consoles before any other console has been enabled.
When that console is then registered via register_console() it will be
enabled as expected.
Link: http://lkml.kernel.org/r/20160809151937.26118-1-paul.burton@imgtec.com
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ivan Delalande <colona@arista.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 874f9c7da9.
Geert Uytterhoeven reports:
"This change seems to have an (unintendent?) side-effect.
Before, pr_*() calls without a trailing newline characters would be
printed with a newline character appended, both on the console and in
the output of the dmesg command.
After this commit, no new line character is appended, and the output
of the next pr_*() call of the same type may be appended, like in:
- Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000
- Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)
+ Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)"
Joe Perches says:
"No, that is not intentional.
The newline handling code inside vprintk_emit is a bit involved and
for now I suggest a revert until this has all the same behavior as
earlier"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 874f9c7da9 ("printk: create pr_<level> functions"), new
pr_level defines were added to printk.c.
These new defines are guarded by an #ifdef CONFIG_PRINTK - however,
there is already a surrounding #ifdef CONFIG_PRINTK starting a lot
earlier in line 249 which means the newly introduced #ifdef is
unnecessary.
Let's remove it to avoid confusion.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a "printk.devkmsg" kernel command line parameter which controls how
userspace writes into /dev/kmsg. It has three options:
* ratelimit - ratelimit logging from userspace.
* on - unlimited logging from userspace
* off - logging from userspace gets ignored
The default setting is to ratelimit the messages written to it.
This changes the kernel default setting of "on" to "ratelimit" and we do
that because we want to keep userspace spamming /dev/kmsg to sane
levels. This is especially moot when a small kernel log buffer wraps
around and messages get lost. So the ratelimiting setting should be a
sane setting where kernel messages should have a bit higher chance of
survival from all the spamming.
It additionally does not limit logging to /dev/kmsg while the system is
booting if we haven't disabled it on the command line.
Furthermore, we can control the logging from a lower priority sysctl
interface - kernel.printk_devkmsg.
That interface will succeed only if printk.devkmsg *hasn't* been
supplied on the command line. If it has, then printk.devkmsg is a
one-time setting which remains for the duration of the system lifetime.
This "locking" of the setting is to prevent userspace from changing the
logging on us through sysctl(2).
This patch is based on previous patches from Linus and Steven.
[bp@suse.de: fixes]
Link: http://lkml.kernel.org/r/20160719072344.GC25563@nazgul.tnic
Link: http://lkml.kernel.org/r/20160716061745.15795-3-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Franck Bui <fbui@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
asm-generic headers are generic implementations for architecture
specific code and should not be included by common code. Thus use the
asm/ version of sections.h to get at the linker sections.
Link: http://lkml.kernel.org/r/1468285008-7331-1-git-send-email-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Messages' levels and console log level are inspected when the actual
printing occurs, which may provoke console_unlock() and
console_cont_flush() to waste CPU cycles on every message that has
loglevel above the current console_loglevel.
Schematically, console_unlock() does the following:
console_unlock()
{
...
for (;;) {
...
raw_spin_lock_irqsave(&logbuf_lock, flags);
skip:
msg = log_from_idx(console_idx);
if (msg->flags & LOG_NOCONS) {
...
goto skip;
}
level = msg->level;
len += msg_print_text(); >> sprintfs
memcpy,
etc.
if (nr_ext_console_drivers) {
ext_len = msg_print_ext_header(); >> scnprintf
ext_len += msg_print_ext_body(); >> scnprintfs
etc.
}
...
raw_spin_unlock(&logbuf_lock);
call_console_drivers(level, ext_text, ext_len, text, len)
{
if (level >= console_loglevel && >> drop the message
!ignore_loglevel)
return;
console->write(...);
}
local_irq_restore(flags);
}
...
}
The thing here is this deferred `level >= console_loglevel' check. We
are wasting CPU cycles on sprintfs/memcpy/etc. preparing the messages
that we will eventually drop.
This can be huge when we register a new CON_PRINTBUFFER console, for
instance. For every such a console register_console() resets the
console_seq, console_idx, console_prev
and sets a `exclusive console' pointer to replay the log buffer to that
just-registered console. And there can be a lot of messages to replay,
in the worst case most of which can be dropped after console_loglevel
test.
We know messages' levels long before we call msg_print_text() and
friends, so we can just move console_loglevel check out of
call_console_drivers() and format a new message only if we are sure that
it won't be dropped.
The patch factors out loglevel check into suppress_message_printing()
function and tests message->level and console_loglevel before formatting
functions in console_unlock() and console_cont_flush() are getting
executed. This improves things not only for exclusive CON_PRINTBUFFER
consoles, but for every console_unlock() that attempts to print a
message of level above the console_loglevel.
Link: http://lkml.kernel.org/r/20160627135012.8229-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using functions instead of macros can reduce overall code size by
eliminating unnecessary "KERN_SOH<digit>" prefixes from format strings.
defconfig x86-64:
$ size vmlinux*
text data bss dec hex filename
10193570 4331464 1105920 15630954 ee826a vmlinux.new
10192623 4335560 1105920 15634103 ee8eb7 vmlinux.old
As the return value are unimportant and unused in the kernel tree, these
new functions return void.
Miscellanea:
- change pr_<level> macros to call new __pr_<level> functions
- change vprintk_nmi and vprintk_default to add LOGLEVEL_<level> argument
[akpm@linux-foundation.org: fix LOGLEVEL_INFO, per Joe]
Link: http://lkml.kernel.org/r/e16cc34479dfefcae37c98b481e6646f0f69efc3.1466718827.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A trivial cosmetic change: interrupt.h header is redundant since commit
6b898c07cb ("console: use might_sleep in console_lock").
Link: http://lkml.kernel.org/r/20160620132847.21930-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently show:
task: <current> ti: <current_thread_info()> task.ti: <task_thread_info(current)>"
"ti" and "task.ti" are redundant, and neither is actually what we want
to show, which the the base of the thread stack. Change the display to
show the stack pointer explicitly.
Link: http://lkml.kernel.org/r/543ac5bd66ff94000a57a02e11af7239571a3055.1468523549.git.luto@kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In NMI context, printk() messages are stored into per-CPU buffers to
avoid a possible deadlock. They are normally flushed to the main ring
buffer via an IRQ work. But the work is never called when the system
calls panic() in the very same NMI handler.
This patch tries to flush NMI buffers before the crash dump is
generated. In this case it does not risk a double release and bails out
when the logbuf_lock is already taken. The aim is to get the messages
into the main ring buffer when possible. It makes them better
accessible in the vmcore.
Then the patch tries to flush the buffers second time when other CPUs
are down. It might be more aggressive and reset logbuf_lock. The aim
is to get the messages available for the consequent kmsg_dump() and
console_flush_on_panic() calls.
The patch causes vprintk_emit() to be called even in NMI context again.
But it is done via printk_deferred() so that the console handling is
skipped. Consoles use internal locks and we could not prevent a
deadlock easily. They are explicitly called later when the crash dump
is not generated, see console_flush_on_panic().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could not resize the temporary buffer in NMI context. Let's warn if
a message is lost.
This is rather theoretical. printk() should not be used in NMI. The
only sensible use is when we want to print backtrace from all CPUs. The
current buffer should be enough for this purpose.
[akpm@linux-foundation.org: whitespace fixlet]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk() takes some locks and could not be used a safe way in NMI
context.
The chance of a deadlock is real especially when printing stacks from
all CPUs. This particular problem has been addressed on x86 by the
commit a9edc88093 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").
The patchset brings two big advantages. First, it makes the NMI
backtraces safe on all architectures for free. Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited. We still should keep the number of messages in NMI context at
minimum).
Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers. These are not easy to avoid.
This patch reuses most of the code and makes it generic. It is useful
for all messages and architectures that support NMI.
The alternative printk_func is set when entering and is reseted when
leaving NMI context. It queues IRQ work to copy the messages into the
main ring buffer in a safe context.
__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers. There is also used a spinlock to get synchronized with other
flushers.
We do not longer use seq_buf because it depends on external lock. It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.
The code is put into separate printk/nmi.c as suggested by Steven
Rostedt. It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter(). This is achieved by the new
HAVE_NMI Kconfig flag.
The are MN10300 and Xtensa architectures. We need to clean up NMI
handling there first. Let's do it separately.
The patch is heavily based on the draft from Peter Zijlstra, see
https://lkml.org/lkml/2015/6/10/327
[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows us to extract from the vmcore only the messages emitted
since the last time the ring buffer was cleared. We just have to make
sure its value is always up-to-date, when old messages are discarded to
free space in log_make_free_space() for example.
Signed-off-by: Zeyu Zhao <zzy8200@gmail.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
have_callable_console() must also test CON_ENABLED bit, not just
CON_ANYTIME. We may have disabled CON_ANYTIME console so printk can
wrongly assume that it's safe to call_console_drivers().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
console_unlock() allows to cond_resched() if its caller has set
`console_may_schedule' to 1, since 8d91f8b153 ("printk: do
cond_resched() between lines while outputting to consoles").
The rules are:
-- console_lock() always sets `console_may_schedule' to 1
-- console_trylock() always sets `console_may_schedule' to 0
However, console_trylock() callers (among them is printk()) do not
always call printk() from atomic contexts, and some of them can
cond_resched() in console_unlock(), so console_trylock() can set
`console_may_schedule' to 1 for such processes.
For !CONFIG_PREEMPT_COUNT kernels, however, console_trylock() always
sets `console_may_schedule' to 0.
It's possible to drop explicit preempt_disable()/preempt_enable() in
vprintk_emit(), because console_unlock() and console_trylock() are now
smart enough:
a) console_unlock() does not cond_resched() when it's unsafe
(console_trylock() takes care of that)
b) console_unlock() does can_use_console() check.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
console_unlock() allows to cond_resched() if its caller has set
`console_may_schedule' to 1 (this functionality is present since
8d91f8b153 ("printk: do cond_resched() between lines while outputting
to consoles").
The rules are:
-- console_lock() always sets `console_may_schedule' to 1
-- console_trylock() always sets `console_may_schedule' to 0
printk() calls console_unlock() with preemption desabled, which
basically can lead to RCU stalls, watchdog soft lockups, etc. if
something is simultaneously calling printk() frequent enough (IOW,
console_sem owner always has new data to send to console divers and
can't leave console_unlock() for a long time).
printk()->console_trylock() callers do not necessarily execute in atomic
contexts, and some of them can cond_resched() in console_unlock().
console_trylock() can set `console_may_schedule' to 1 (allow
cond_resched() later in consoe_unlock()) when it's safe.
This patch (of 3):
vprintk_emit() disables preemption around console_trylock_for_printk()
and console_unlock() calls for a strong reason -- can_use_console()
check. The thing is that vprintl_emit() can be called on a CPU that is
not fully brought up yet (!cpu_online()), which potentially can cause
problems if console driver wants to access per-cpu data. A console
driver can explicitly state that it's safe to call it from !online cpu
by setting CON_ANYTIME bit in console ->flags. That's why for
!cpu_online() can_use_console() iterates all the console to find out if
there is a CON_ANYTIME console, otherwise console_unlock() must be
avoided.
can_use_console() ensures that console_unlock() call is safe in
vprintk_emit() only; console_lock() and console_trylock() are not
covered by this check. Even though call_console_drivers(), invoked from
console_cont_flush() and console_unlock(), tests `!cpu_online() &&
CON_ANYTIME' for_each_console(), it may be too late, which can result in
messages loss.
Assume that we have 2 cpus -- CPU0 is online, CPU1 is !online, and no
CON_ANYTIME consoles available.
CPU0 online CPU1 !online
console_trylock()
...
console_unlock()
console_cont_flush
spin_lock logbuf_lock
if (!cont.len) {
spin_unlock logbuf_lock
return
}
for (;;) {
vprintk_emit
spin_lock logbuf_lock
log_store
spin_unlock logbuf_lock
spin_lock logbuf_lock
!console_trylock_for_printk msg_print_text
return console_idx = log_next()
console_seq++
console_prev = msg->flags
spin_unlock logbuf_lock
call_console_drivers()
for_each_console(con) {
if (!cpu_online() &&
!(con->flags & CON_ANYTIME))
continue;
}
/*
* no message printed, we lost it
*/
vprintk_emit
spin_lock logbuf_lock
log_store
spin_unlock logbuf_lock
!console_trylock_for_printk
return
/*
* go to the beginning of the loop,
* find out there are new messages,
* lose it
*/
}
console_trylock()/console_lock() call on CPU1 may come from cpu
notifiers registered on that CPU. Since notifiers are not getting
unregistered when CPU is going DOWN, all of the notifiers receive
notifications during CPU UP. For example, on my x86_64, I see around 50
notification sent from offline CPU to itself
[swapper/2] from cpu:2 to:2 action:CPU_STARTING hotplug_hrtick
[swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_main_cpu_notify
[swapper/2] from cpu:2 to:2 action:CPU_STARTING blk_mq_queue_reinit_notify
[swapper/2] from cpu:2 to:2 action:CPU_STARTING console_cpu_notify
while doing
echo 0 > /sys/devices/system/cpu/cpu2/online
echo 1 > /sys/devices/system/cpu/cpu2/online
So grabbing the console_sem lock while CPU is !online is possible,
in theory.
This patch moves can_use_console() check out of
console_trylock_for_printk(). Instead it calls it in console_unlock(),
so now console_lock()/console_unlock() are also 'protected' by
can_use_console(). This also means that console_trylock_for_printk() is
not really needed anymore and can be removed.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On architectures that have support for efficient unaligned access struct
printk_log has 4-byte alignment. Specify alignment attribute in type
declaration.
The whole point of this patch is to fix deadlock which happening when
UBSAN detects unaligned access in printk() thus UBSAN recursively calls
printk() with logbuf_lock held by top printk() call.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yury Gribov <y.gribov@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`recursion_bug' is used as recursion_bug toggle, so make it `bool'.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
@console_may_schedule tracks whether console_sem was acquired through
lock or trylock. If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched(). This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.
However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines. Also, only a few drivers call
console_conditional_schedule() to begin with. This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.
If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.
Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boot consoles are typically replaced by proper consoles during the boot
process. This can be problematic if the boot console data is part of
the init section that is reclaimed late during boot. If the proper
console does not register before this point in time, the boot console
will need to be removed (so that the freed memory is not accessed),
leaving the system without output for some time.
There are various reasons why the proper console may not register early
enough, such as deferred probe or the driver being a loadable module.
If that happens, there is some amount of time where no console messages
are visible to the user, which in turn can mean that they won't see
crashes or other potentially useful information.
To avoid this situation, only remove the boot console when it resides in
the init section. Code exists to replace the boot console by the proper
console when it is registered, keeping a seamless transition between the
boot and proper consoles.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following statement of ABI/testing/dev-kmsg is not quite right:
It is not possible to inject messages from userspace with the
facility number LOG_KERN (0), to make sure that the origin of the
messages can always be reliably determined.
Userland actually can inject messages with a facility of 0 by abusing the
fact that the facility is stored in a u8 data type. By using a facility
which is a multiple of 256 the assignment of msg->facility in log_store()
implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg
to spoof kernel messages as shown below:
The following call...
# printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg
...leads to the following log entry (dmesg -x | tail -n 1):
user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty
However, this call...
# printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg
...leads to the slightly different log entry (note the kernel facility):
kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty
Fix that by limiting the user provided facility to 8 bit right from the
beginning and catch the truncation early.
Fixes: 7ff9554bb5 ("printk: convert byte-buffer to variable-length...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Alex Elder <elder@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pstore doesn't support unregistering yet. It was marked as TODO.
This patch adds some code to fix it:
1) Add functions to unregister kmsg/console/ftrace/pmsg.
2) Add a function to free compression buffer.
3) Unmap the memory and free it.
4) Add a function to unregister pstore filesystem.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Kees Cook <keescook@chromium.org>
[Removed __exit annotation from ramoops_remove(). Reported by Arnd Bergmann]
Signed-off-by: Tony Luck <tony.luck@intel.com>
There are two kexec load syscalls, kexec_load another and kexec_file_load.
kexec_file_load has been splited as kernel/kexec_file.c. In this patch I
split kexec_load syscall code to kernel/kexec.c.
And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.
The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use
kexec_load syscall can bypass the checking.
Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.
Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig. Also updated general kernel code with to
kexec_load syscall.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comment about /dev/kmsg does not mention the additional values which
may actually be exported, fix that.
Also move up the part of the comment instructing the users to ignore these
additional values, this way the reading is more fluent and logically
compact.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch fixes drawbacks in heck_syslog_permissions() noticed by AKPM:
"from_file handling makes me cry.
That's not a boolean - it's an enumerated value with two values
currently defined.
But the code in check_syslog_permissions() treats it as a boolean and
also hardwires the knowledge that SYSLOG_FROM_PROC == 1 (or == `true`).
And the name is wrong: it should be called from_proc to match
SYSLOG_FROM_PROC."
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The final version of commit 637241a900 ("kmsg: honor dmesg_restrict
sysctl on /dev/kmsg") lost few hooks, as result security_syslog() are
processed incorrectly:
- open of /dev/kmsg checks syslog access permissions by using
check_syslog_permissions() where security_syslog() is not called if
dmesg_restrict is set.
- syslog syscall and /proc/kmsg calls do_syslog() where security_syslog
can be executed twice (inside check_syslog_permissions() and then
directly in do_syslog())
With this patch security_syslog() is called once only in all
syslog-related operations regardless of dmesg_restrict value.
Fixes: 637241a900 ("kmsg: honor dmesg_restrict sysctl on /dev/kmsg")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk log_buf keeps various metadata for each message including its
sequence number and timestamp. The metadata is currently available only
through /dev/kmsg and stripped out before passed onto console drivers. We
want this metadata to be available to console drivers too so that console
consumers can get full information including the metadata and dictionary,
which among other things can be used to detect whether messages got lost
in transit.
This patch implements support for extended console drivers. Consoles can
indicate that they want extended messages by setting the new CON_EXTENDED
flag and they'll be fed messages formatted the same way as /dev/kmsg.
"<level>,<sequnum>,<timestamp>,<contflag>;<message text>\n"
If extended consoles exist, in-kernel fragment assembly is disabled. This
ensures that all messages emitted to consoles have full metadata including
sequence number. The contflag carries enough information to reassemble
the fragments from the reader side trivially. Note that this only affects
/dev/kmsg. Regular console and /proc/kmsg outputs are not affected by
this change.
* Extended message formatting for console drivers is enabled iff there
are registered extended consoles.
* Comment describing /dev/kmsg message format updated to add missing
contflag field and help distinguishing variable from verbatim terms.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The extended message formatting used for /dev/kmsg will be used implement
extended consoles. Factor out msg_print_ext_header() and
msg_print_ext_body() from devkmsg_read().
This is pure restructuring.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset updates netconsole so that it can emit messages with the
same header as used in /dev/kmsg which gives neconsole receiver full log
information which enables things like structured logging and detection
of lost messages.
This patch (of 7):
devkmsg_read() uses 8k buffer and assumes that the formatted output
message won't overrun which seems safe given LOG_LINE_MAX, the current use
of dict and the escaping method being used; however, we're planning to use
devkmsg formatting wider and accounting for the buffer size properly isn't
that complicated.
This patch defines CONSOLE_EXT_LOG_MAX as 8192 and updates devkmsg_read()
so that it limits output accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay@vrfy.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's the big tty/serial driver update for 4.1-rc1.
It was delayed for a bit due to some questions surrounding some of the
console command line parsing changes that are in here. There's still
one tiny regression for people who were previously putting multiple
console command lines and expecting them all to be ignored for some odd
reason, but Peter is working on fixing that. If not, I'll send a revert
for the offending patch, but I have faith that Peter can address it.
Other than the console work here, there's the usual serial driver
updates and changes, and a buch of 8250 reworks to try to make that
driver easier to maintain over time, and have it support more devices in
the future.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlU2IcUACgkQMUfUDdst+ylFqACcC8LPhFEZg9aHn0hNUoqGK3rE
5dUAnR4b8r/NYqjVoE9FJZgZfB/TqVi1
=lyN/
-----END PGP SIGNATURE-----
Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here's the big tty/serial driver update for 4.1-rc1.
It was delayed for a bit due to some questions surrounding some of the
console command line parsing changes that are in here. There's still
one tiny regression for people who were previously putting multiple
console command lines and expecting them all to be ignored for some
odd reason, but Peter is working on fixing that. If not, I'll send a
revert for the offending patch, but I have faith that Peter can
address it.
Other than the console work here, there's the usual serial driver
updates and changes, and a buch of 8250 reworks to try to make that
driver easier to maintain over time, and have it support more devices
in the future.
All of these have been in linux-next for a while"
* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
n_gsm: Drop unneeded cast on netdev_priv
sc16is7xx: expose RTS inversion in RS-485 mode
serial: 8250_pci: port failed after wakeup from S3
earlycon: 8250: Document kernel command line options
earlycon: 8250: Fix command line regression
earlycon: Fix __earlycon_table stride
tty: clean up the tty time logic a bit
serial: 8250_dw: only get the clock rate in one place
serial: 8250_dw: remove useless ACPI ID check
dmaengine: hsu: move memory allocation to GFP_NOWAIT
dmaengine: hsu: remove redundant pieces of code
serial: 8250_pci: add Intel Tangier support
dmaengine: hsu: add Intel Tangier PCI ID
serial: 8250_pci: replace switch-case by formula for Intel MID
serial: 8250_pci: replace switch-case by formula
tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
serial: jsm: some off by one bugs
serial: xuartps: Fix check in console_setup().
serial: xuartps: Get rid of register access macros.
serial: xuartps: Fix iobase use.
...
Add match() method to struct console which allows the console to
perform console command line matching instead of (or in addition to)
default console matching (ie., by fixed name and index).
The match() method returns 0 to indicate a successful match; normal
console matching occurs if no match() method is defined or the
match() method returns non-zero. The match() method is expected to set
the console index if required.
Re-implement earlycon-to-console-handoff with direct matching of
"console=uart|uart8250,..." to the 8250 ttyS console.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is no need to pass the total request length in the kiocb, as
we already get passed in through the iov_iter argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before register_console() calls the setup() method of the matched
console, the registering console index is already equal to the index
from the console command line; ie. newcon->index == c->index.
This change is also required to support extensible console matching;
(the command line index may have no relation to the console index
assigned by the console-defined match() function).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ae9200f2c ("enlarge console.name") increased the storage
for the console name to 16 bytes, but not the corresponding
struct console_cmdline::name storage. Console names longer than
8 bytes cause read beyond end-of-string and failure to match
console; I'm not sure if there are other unexpected consequences.
Cc: <stable@vger.kernel.org> # 2.6.22+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KDB: improved searching
* No longer enter debug core on panic if panic timeout is set
KGDB/KDB regressions / cleanups
* fix pdf doc build errors
* prevent junk characters on kdb console from printk levels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TH0R
-----END PGP SIGNATURE-----
Merge tag 'for_linux-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kgdb/kdb updates from Jason Wessel:
"KGDB/KDB New:
- KDB: improved searching
- No longer enter debug core on panic if panic timeout is set
KGDB/KDB regressions / cleanups
- fix pdf doc build errors
- prevent junk characters on kdb console from printk levels"
* tag 'for_linux-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kgdb, docs: Fix <para> pdfdocs build errors
debug: prevent entering debug mode on panic/exception.
kdb: Const qualifier for kdb_getstr's prompt argument
kdb: Provide forward search at more prompt
kdb: Fix a prompt management bug when using | grep
kdb: Remove stack dump when entering kgdb due to NMI
kdb: Avoid printing KERN_ levels to consoles
kdb: Fix off by one error in kdb_cpu()
kdb: fix incorrect counts in KDB summary command output
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".
This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().
The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Neaten the MODULE_PARAM_DESC message.
Use 30 seconds in the comment for the zap console locks timeout.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
o Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
o The seq_buf code was change to model the seq_file code. I have
a patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was done
to make sure that seq_buf.c is compatible with seq_file.c. I may
try to get that patch in for 3.20.
o The seq_buf.c file was moved to lib/ to remove it from being dependent
on CONFIG_TRACING.
o The printk() was updated to allow for a per_cpu "override" of
the internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow the
NMI to change what printk() does in order to call dump_stack() without
needing to update that code as well.
o Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would wait
till all the NMIs finished, and then it would print the seq_buf
data to the console safely from a non NMI context.
[ Updated to remove unnecessary preempt_disable in printk() ]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUi8A8AAoJEEjnJuOKh9ldv0sH/A+l9Ewrc3Kd0XuUKX9UO9Mj
yrDz5dSWTxD6Pi7ni5Zo2f/MebXhrgS8gF1MBN1HMS5s9/9XdTTQijosOfs75iFd
xufiDur7ssl2EOLB/ouqWVn16tu1PrPyw+U76JUZvsYlIMSWQu2FH8DSdo59N6Iz
7RxS8rtxJ2IwehmO7tu2Lq5rB7zGL4SET5oIfQ1+KnjzqB5Z1bfm9nGwAc8nozx8
3MqwsClEnXBTkY4eYZzu9wD7Nl/eknzTrk8KDbQ49oTYmoBuuh/s1FMuxe75cY55
wEtDA6HvvTXYnw6YOAMUB41cGnRg3KVRmmhcH5T9jrBxg2iZjXYa8iZxvcAM6Es=
=zDMJ
-----END PGP SIGNATURE-----
Merge tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixlet from Steven Rostedt:
"Remove unnecessary preempt_disable in printk()"
* tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk: Do not disable preemption for accessing printk_func
As printk_func will either be the default function, or a per_cpu function
for the current CPU, there's no reason to disable preemption to access
it from printk. That's because if the printk_func is not the default
then the caller had better disabled preemption as they were the one to
change it.
Link: http://lkml.kernel.org/r/CA+55aFz5-_LKW4JHEBoWinN9_ouNcGRWAF2FUA35u46FRN-Kxw@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
o Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
o The seq_buf code was change to model the seq_file code. I have
a patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was done
to make sure that seq_buf.c is compatible with seq_file.c. I may
try to get that patch in for 3.20.
o The seq_buf.c file was moved to lib/ to remove it from being dependent
on CONFIG_TRACING.
o The printk() was updated to allow for a per_cpu "override" of
the internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow the
NMI to change what printk() does in order to call dump_stack() without
needing to update that code as well.
o Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would wait
till all the NMIs finished, and then it would print the seq_buf
data to the console safely from a non NMI context.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD
GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX
GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb
/7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF
77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX
GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34=
=YBgA
-----END PGP SIGNATURE-----
Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nmi-safe seq_buf printk update from Steven Rostedt:
"This code is a fork from the trace-3.19 pull as it needed the
trace_seq clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in
practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
- Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
- The seq_buf code was change to model the seq_file code. I have a
patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was
done to make sure that seq_buf.c is compatible with seq_file.c. I
may try to get that patch in for 3.20.
- The seq_buf.c file was moved to lib/ to remove it from being
dependent on CONFIG_TRACING.
- The printk() was updated to allow for a per_cpu "override" of the
internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow
the NMI to change what printk() does in order to call dump_stack()
without needing to update that code as well.
- Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would
wait till all the NMIs finished, and then it would print the
seq_buf data to the console safely from a non NMI context
One added bonus is that this code also makes the NMI dump stack work
on PREEMPT_RT kernels. As printk() includes sleeping locks on
PREEMPT_RT, printk() only writes to console if the console does not
use any rt_mutex converted spin locks. Which a lot do"
* tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/nmi: Fix use of unallocated cpumask_var_t
printk/percpu: Define printk_func when printk is not defined
x86/nmi: Perform a safe NMI stack trace on all CPUs
printk: Add per_cpu printk func to allow printk to be diverted
seq_buf: Move the seq_buf code to lib/
seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF
tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions
tracing: Have seq_buf use full buffer
seq_buf: Add seq_buf_can_fit() helper function
tracing: Add paranoid size check in trace_printk_seq()
tracing: Use trace_seq_used() and seq_buf_used() instead of len
tracing: Clean up tracing_fill_pipe_page()
seq_buf: Create seq_buf_used() to find out how much was written
tracing: Add a seq_buf_clear() helper and clear len and readpos in init
tracing: Convert seq_buf fields to be like seq_file fields
tracing: Convert seq_buf_path() to be like seq_path()
tracing: Create seq_buf layer in trace_seq
Merge first patchbomb from Andrew Morton:
- a few minor cifs fixes
- dma-debug upadtes
- ocfs2
- slab
- about half of MM
- procfs
- kernel/exit.c
- panic.c tweaks
- printk upates
- lib/ updates
- checkpatch updates
- fs/binfmt updates
- the drivers/rtc tree
- nilfs
- kmod fixes
- more kernel/exit.c
- various other misc tweaks and fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
exit: pidns: fix/update the comments in zap_pid_ns_processes()
exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
exit: exit_notify: re-use "dead" list to autoreap current
exit: reparent: call forget_original_parent() under tasklist_lock
exit: reparent: avoid find_new_reaper() if no children
exit: reparent: introduce find_alive_thread()
exit: reparent: introduce find_child_reaper()
exit: reparent: document the ->has_child_subreaper checks
exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()
exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting
exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting
exit: proc: don't try to flush /proc/tgid/task/tgid
exit: release_task: fix the comment about group leader accounting
exit: wait: drop tasklist_lock before psig->c* accounting
exit: wait: don't use zombie->real_parent
exit: wait: cleanup the ptrace_reparented() checks
usermodehelper: kill the kmod_thread_locker logic
usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper()
fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp
nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races
...
Pranith Kumar posted a patch in which removed the "volatile"
qualifier for the "logbuf_cpu" variable in vprintk_emit().
https://lkml.org/lkml/2014/11/13/894
In his patch, he used ACCESS_ONCE() for all references to
that symbol to provide whatever protection was intended.
There was some discussion that followed, and in the end Steven Rostedt
concluded that not only was "volatile" not needed, neither was it
required to use ACCESS_ONCE(). I offered an elaborate description that
concluded Steven was right, and Pranith asked me to submit an
alternative patch. And this is it.
The basic reason "volatile" is not needed is that "logbuf_cpu" has
static storage duration, and vprintk_emit() is an exported
interface. This means that the value of logbuf_cpu must be read
from memory the first time it is used in a particular call of
vprintk_emit(). The variable's value is read only once in that
function, when it's read it'll be the copy from memory (or cache).
In addition, the value of "logbuf_cpu" is only ever written under
protection of a spinlock. So the value that is read is the "real"
value (and not an out-of-date cached one). If its value is not
UINT_MAX, it is the current CPU's processor id, and it will have
been last written by the running CPU.
Signed-off-by: Alex Elder <elder@linaro.org>
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eliminate the unlikely possibility of message interleaving for
early_printk/early_vprintk use.
early_vprintk can be done via the %pV extension so remove this
unnecessary function and change early_printk to have the equivalent
vprintk code.
All uses of early_printk already end with a newline so also remove the
unnecessary newline from the early_printk function.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid include hell, the per_cpu variable printk_func was declared
in percpu.h. But it is only defined if printk is defined.
As users of printk may also use the printk_func variable, it needs to
be defined even if CONFIG_PRINTK is not.
Also add a printk.h include in percpu.h just to be safe.
Link: http://lkml.kernel.org/r/20141121183215.01ba539c@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Being able to divert printk to call another function besides the normal
logging is useful for such things like NMI handling. If some functions
are to be called from NMI that does printk() it is possible to lock up
the box if the nmi handler triggers when another printk is happening.
One example of this use is to perform a stack trace on all CPUs via NMI.
But if the NMI is to do the printk() it can cause the system to lock up.
By allowing the printk to be diverted to another function that can safely
record the printk output and then print it when it in a safe context
then NMIs will be safe to call these functions like show_regs().
Link: http://lkml.kernel.org/p/20140619213952.209176403@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the kernel.dmesg_restrict restriction is in place, only users with
CAP_SYSLOG should be able to access crash dumps (like: attacker is
trying to exploit a bug, watchdog reboots, attacker can happily read
crash dumps and logs).
This puts the restriction on console-* types as well as sensitive
information could have been leaked there.
Other log types are unaffected.
Signed-off-by: Sebastian Schmidt <yath@yath.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.
This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().
Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().
This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"
* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...
Commit 458df9fd48 ("printk: remove separate printk_sched buffers and use
printk buf instead") hardcodes printk_deferred() to KERN_WARNING and
inserts the string "[sched_delayed] " before the actual message. However
it doesn't take into account the KERN_* prefix of the message, that now
ends up in the middle of the output:
[sched_delayed] ^a4CE: hpet increased min_delta_ns to 20115 nsec
Fix this by just getting rid of the "[sched_delayed] " scnprintf(). The
prefix is useless since 458df9fd48 anyway since from that moment
printk_deferred() inserts the message into the kernel printk buffer
immediately. So if the message eventually gets printed to console, it is
printed in the correct order with other messages and there's no need for
any special prefix. And if the kernel crashes before the message makes it
to console, then prefix in the printk buffer doesn't make the situation
any better.
Link: http://lkml.org/lkml/2014/9/14/4
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When configuring a uniprocessor kernel, don't bother the user with an
irrelevant LOG_CPU_MAX_BUF_SHIFT question, and don't build the unused
code.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We shouldn't set text_len in the code path that detects printk recursion
because text_len corresponds to the length of the string inside textbuf.
A few lines down from the line
text_len = strlen(recursion_msg);
is the line
text_len += vscnprintf(text + text_len, ...);
So if printk detects recursion, it sets text_len to 29 (the length of
recursion_msg) and logs an error. Then the message supplied by the
caller of printk is stored inside textbuf but offset by 29 bytes. This
means that the output of the recursive call to printk will contain 29
bytes of garbage in front of it.
This defect is caused by commit 458df9fd48 ("printk: remove separate
printk_sched buffers and use printk buf instead") which turned the line
text_len = vscnprintf(text, ...);
into
text_len += vscnprintf(text + text_len, ...);
To fix this, this patch avoids setting text_len when logging the printk
recursion error. This patch also marks unlikely() the branch leading up
to this code.
Fixes: 458df9fd48 ("printk: remove separate printk_sched buffers and use printk buf instead")
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace uses of __get_cpu_var for address calculation with this_cpu_ptr.
Cc: akpm@linux-foundation.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Platforms like IBM Power Systems supports service processor
assisted dump. It provides interface to add memory region to
be captured when system is crashed.
During initialization/running we can add kernel memory region
to be collected.
Presently we don't have a way to get the log buffer base address
and size. This patch adds support to return log buffer address
and size.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()). However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().
We can lose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock().
We differ from (reverted) commit 939f04bec1 in that we avoid calling
console_unlock() from vprintk_emit() with lockdep enabled as that has
unveiled quite some bugs leading to system freezes during boot (e.g.
https://lkml.org/lkml/2014/5/30/242,
https://lkml.org/lkml/2014/6/28/521).
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some small cleanups to kernel/printk/printk.c. None of them should
cause any change in behavior.
- When CONFIG_PRINTK is defined, parenthesize the value of LOG_LINE_MAX.
- When CONFIG_PRINTK is *not* defined, there is an extra LOG_LINE_MAX
definition; delete it.
- Pull an assignment out of a conditional expression in console_setup().
- Use isdigit() in console_setup() rather than open coding it.
- In update_console_cmdline(), drop a NUL-termination assignment;
the strlcpy() call that precedes it guarantees it's not needed.
- Simplify some logic in printk_timed_ratelimit().
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the IS_ENABLED() macro rather than #ifdef blocks to set certain
global values.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a few comments that don't accurately describe their corresponding
code. It also fixes some minor typographical errors.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a8fe19ebfb ("kernel/printk: use symbolic defines for console
loglevels") makes consistent use of symbolic values for printk() log
levels.
The naming scheme used is different from the one used for
DEFAULT_MESSAGE_LOGLEVEL though. Change that symbol name to be
MESSAGE_LOGLEVEL_DEFAULT for consistency. And because the value of that
symbol comes from a similarly-named config option, rename
CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds