Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Moro says:
------
The issue lies in the filtering of ICMP and ICMPv6 errors that include an
inner IP datagram.
For these packets, icmp_error_message() extract the ICMP error and inner
layer to search of a known state.
If a state is found the packet is tagged as related (IP_CT_RELATED).
The problem is that there is no correlation check between the inner and
outer layer of the packet.
So one can encapsulate an error with an inner layer matching a known state,
while its outer layer is directed to a filtered host.
In this case the whole packet will be tagged as related.
This has various implications from a rule bypass (if a rule to related
trafic is allow), to a known state oracle.
Unfortunately, we could not find a real statement in a RFC on how this case
should be filtered.
The closest we found is RFC5927 (Section 4.3) but it is not very clear.
A possible fix would be to check that the inner IP source is the same than
the outer destination.
We believed this kind of attack was not documented yet, so we started to
write a blog post about it.
You can find it attached to this mail (sorry for the extract quality).
It contains more technical details, PoC and discussion about the identified
behavior.
We discovered later that
https://www.gont.com.ar/papers/filtering-of-icmp-error-messages.pdf
described a similar attack concept in 2004 but without the stateful
filtering in mind.
-----
This implements above suggested fix:
In icmp(v6) error handler, take outer destination address, then pass
that into the common function that does the "related" association.
After obtaining the nf_conn of the matching inner-headers connection,
check that the destination address of the opposite direction tuple
is the same as the outer address and only set RELATED if thats the case.
Reported-by: Luca Moro <luca.moro@synacktiv.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Those were needed we still had modular trackers.
As we don't have those anymore, prefer direct calls and remove all
the (un)register infrastructure associated with this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Due to historical reasons, all l4 trackers register their own
sysctls.
This leads to copy&pasted boilerplate code, that does exactly same
thing, just with different data structure.
Place all of this in a single file.
This allows to remove the various ctl_table pointers from the ct_netns
structure and reduces overall code size.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
after removal of the packet and invert function pointers, several
places do not need to lookup the l4proto structure anymore.
Remove those lookups.
The function nf_ct_invert_tuplepr becomes redundant, replace
it with nf_ct_invert_tuple everywhere.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only used by icmp(v6). Prefer a direct call and remove this
function from the l4proto struct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
rather than handling them via indirect call, use a direct one instead.
This leaves GRE as the last user of this indirect call facility.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The l4 protocol trackers are invoked via indirect call: l4proto->packet().
With one exception (gre), all l4trackers are builtin, so we can make
.packet optional and use a direct call for most protocols.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
l4 protocols are demuxed by l3num, l4num pair.
However, almost all l4 trackers are l3 agnostic.
Only exceptions are:
- gre, icmp (ipv4 only)
- icmpv6 (ipv6 only)
This commit gets rid of the l3 mapping, l4 trackers can now be looked up
by their IPPROTO_XXX value alone, which gets rid of the additional l3
indirection.
For icmp, ipcmp6 and gre, add a check on state->pf and
return -NF_ACCEPT in case we're asked to track e.g. icmpv6-in-ipv4,
this seems more fitting than using the generic tracker.
Additionally we can kill the 2nd l4proto definitions that were needed
for v4/v6 split -- they are now the same so we can use single l4proto
struct for each protocol, rather than two.
The EXPORT_SYMBOLs can be removed as all these object files are
part of nf_conntrack with no external references.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its unused, next patch will remove l4proto->l3proto number to simplify
l4 protocol demuxer lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
icmp(v6) are the only two layer four protocols that need the error()
callback (to handle icmp errors that are related to an established
connections, e.g. packet too big, port unreachable and the like).
Remove the error callback and handle these two special cases from the core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only two protocols need the ->error() function: icmp and icmpv6.
This is because icmp error mssages might be RELATED to an existing
connection (e.g. PMTUD, port unreachable and the like), and their
->error() handlers do this.
The error callback is already optional, so remove it for
udp and call them from ->packet() instead.
As the error() callback can call checksum functions that write to
skb->csum*, the const qualifier has to be removed as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
->new() gets invoked after ->error() and before ->packet() if
a conntrack lookup has found no result for the tuple.
We can fold it into ->packet() -- the packet() implementations
can check if the conntrack is confirmed (new) or not
(already in hash).
If its unconfirmed, the conntrack isn't in the hash yet so current
skb created a new conntrack entry.
Only relevant side effect -- if packet() doesn't return NF_ACCEPT
but -NF_ACCEPT (or drop), while the conntrack was just created,
then the newly allocated conntrack is freed right away, rather than not
created in the first place.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_hook_state contains all the hook meta-information: netns, protocol family,
hook location, and so on.
Instead of only passing selected information, pass a pointer to entire
structure.
This will allow to merge the error and the packet handlers and remove
the ->new() function in followup patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that cttimeout support for nft_ct is in place, these should depend
on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the
policy if this option is not enabled.
[ 71.600121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[...]
[ 71.600141] CPU: 3 PID: 7612 Comm: nft Not tainted 4.18.0+ #246
[...]
[ 71.600188] Call Trace:
[ 71.600201] ? nft_ct_timeout_obj_dump+0xc6/0xf0 [nft_ct]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This unifies ipv4 and ipv6 protocol trackers and removes the l3proto
abstraction.
This gets rid of all l3proto indirect calls and the need to do
a lookup on the function to call for l3 demux.
It increases module size by only a small amount (12kbyte), so this reduces
size because nf_conntrack.ko is useless without either nf_conntrack_ipv4
or nf_conntrack_ipv6 module.
before:
text data bss dec hex filename
7357 1088 0 8445 20fd nf_conntrack_ipv4.ko
7405 1084 4 8493 212d nf_conntrack_ipv6.ko
72614 13689 236 86539 1520b nf_conntrack.ko
19K nf_conntrack_ipv4.ko
19K nf_conntrack_ipv6.ko
179K nf_conntrack.ko
after:
text data bss dec hex filename
79277 13937 236 93450 16d0a nf_conntrack.ko
191K nf_conntrack.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17 15:27:49 +02:00
Renamed from net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c (Browse further)