[ Upstream commit 60380488e4 ]
Rafał found an issue that for non-Ethernet interface, if we down and up
frequently, the memory will be consumed slowly.
The reason is we add allnodes/allrouters addressed in multicast list in
ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast
addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up()
for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb
getting bigger and bigger. The call stack looks like:
addrconf_notify(NETDEV_REGISTER)
ipv6_add_dev
ipv6_dev_mc_inc(ff01::1)
ipv6_dev_mc_inc(ff02::1)
ipv6_dev_mc_inc(ff02::2)
addrconf_notify(NETDEV_UP)
addrconf_dev_config
/* Alas, we support only Ethernet autoconfiguration. */
return;
addrconf_notify(NETDEV_DOWN)
addrconf_ifdown
ipv6_mc_down
igmp6_group_dropped(ff02::2)
mld_add_delrec(ff02::2)
igmp6_group_dropped(ff02::1)
igmp6_group_dropped(ff01::1)
After investigating, I can't found a rule to disable multicast on
non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM,
tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up()
in inetdev_event(). Even for IPv6, we don't check the dev type and call
ipv6_add_dev(), ipv6_dev_mc_inc() after register device.
So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for
non-Ethernet interface.
v2: Also check IFF_MULTICAST flag to make sure the interface supports
multicast
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Fixes: 74235a25c6 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels")
Fixes: 1666d49e1d ("mld: do not remove mld souce list info when set link down")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83f73c5bb7 ]
In commit 1ec17dbd90 ("inet_diag: fix reporting cgroup classid and
fallback to priority") croup classid reporting was fixed. But this works
only for TCP sockets because for other socket types icsk parameter can
be NULL and classid code path is skipped. This change moves classid
handling to inet_diag_msg_attrs_fill() function.
Also inet_diag_msg_attrs_size() helper was added and addends in
nlmsg_new() were reordered to save order from inet_sk_diag_fill().
Fixes: 1ec17dbd90 ("inet_diag: fix reporting cgroup classid and fallback to priority")
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 018d26fcd1 ]
In our production environment we have faced with problem that updating
classid in cgroup with heavy tasks cause long freeze of the file tables
in this tasks. By heavy tasks we understand tasks with many threads and
opened sockets (e.g. balancers). This freeze leads to an increase number
of client timeouts.
This patch implements following logic to fix this issue:
аfter iterating 1000 file descriptors file table lock will be released
thus providing a time gap for socket creation/deletion.
Now update is non atomic and socket may be skipped using calls:
dup2(oldfd, newfd);
close(oldfd);
But this case is not typical. Moreover before this patch skip is possible
too by hiding socket fd in unix socket buffer.
New sockets will be allocated with updated classid because cgroup state
is updated before start of the file descriptors iteration.
So in common cases this patch has no side effects.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2adbae0cb upstream.
HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.
Fixes: 5af29028fd ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b0f95c49d upstream.
Apply const prefix to each coef table array.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ae4edab2f upstream.
Clang warns when CONFIG_BALLOON_COMPACTION is unset:
../drivers/virtio/virtio_balloon.c:963:1: warning: unused label
'out_del_vqs' [-Wunused-label]
out_del_vqs:
^~~~~~~~~~~~
1 warning generated.
Move the label within the preprocessor block since it is only used when
CONFIG_BALLOON_COMPACTION is set.
Fixes: 1ad6f58ea9 ("virtio_balloon: Fix memory leaks on errors in virtballoon_probe()")
Link: https://github.com/ClangBuiltLinux/linux/issues/886
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200216004039.23464-1-natechancellor@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b9f386c4b upstream.
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db37a34c56 upstream.
BFQ schedules generic entities, which may represent either bfq_queues
or groups of bfq_queues. When an entity is inserted into a service
tree, a reference must be taken, to make sure that the entity does not
disappear while still referred in the tree. Unfortunately, such a
reference is mistakenly taken only if the entity represents a
bfq_queue. This commit takes a reference also in case the entity
represents a group.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Chris Evich <cevich@redhat.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be36f9e751 upstream.
This function is consistent with using size instead of seed->size
(except for one place that this patch fixes), but it reads seed->size
without using READ_ONCE, which means the compiler might still do
something unwanted. So, this commit simply adds the READ_ONCE
wrapper.
Fixes: 636259880a ("efi: Add support for seeding the RNG from a UEFI ...")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200217123354.21140-1-Jason@zx2c4.com
Link: https://lore.kernel.org/r/20200221084849.26878-5-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8319e9d5ad upstream.
The mixed mode runtime wrappers are fragile when it comes to how the
memory referred to by its pointer arguments are laid out in memory, due
to the fact that it translates these addresses to physical addresses that
the runtime services can dereference when running in 1:1 mode. Since
vmalloc'ed pages (including the vmap'ed stack) are not contiguous in the
physical address space, this scheme only works if the referenced memory
objects do not cross page boundaries.
Currently, the mixed mode runtime service wrappers require that all by-ref
arguments that live in the vmalloc space have a size that is a power of 2,
and are aligned to that same value. While this is a sensible way to
construct an object that is guaranteed not to cross a page boundary, it is
overly strict when it comes to checking whether a given object violates
this requirement, as we can simply take the physical address of the first
and the last byte, and verify that they point into the same physical page.
When this check fails, we emit a WARN(), but then simply proceed with the
call, which could cause data corruption if the next physical page belongs
to a mapping that is entirely unrelated.
Given that with vmap'ed stacks, this condition is much more likely to
trigger, let's relax the condition a bit, but fail the runtime service
call if it does trigger.
Fixes: f6697df36b ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-4-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63056e8b5e upstream.
Hans reports that his mixed mode systems running v5.6-rc1 kernels hit
the WARN_ON() in virt_to_phys_or_null_size(), caused by the fact that
efi_guid_t objects on the vmap'ed stack happen to be misaligned with
respect to their sizes. As a quick (i.e., backportable) fix, copy GUID
pointer arguments to the local stack into a buffer that is naturally
aligned to its size, so that it is guaranteed to cover only one
physical page.
Note that on x86, we cannot rely on the stack pointer being aligned
the way the compiler expects, so we need to allocate an 8-byte aligned
buffer of sufficient size, and copy the GUID into that buffer at an
offset that is aligned to 16 bytes.
Fixes: f6697df36b ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200221084849.26878-2-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc37a1632d upstream.
PowerVM systems running compatibility mode on a few Power8 revisions are
still vulnerable to the hardware defect that loses PMU exceptions arriving
prior to a context switch.
The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG
cpu_feature bit, nevertheless this bit also needs to be set for PowerVM
compatibility mode systems.
Fixes: 68f2f0d431 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG")
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfc6014e3b upstream.
handle_error() currently calls snprintf() a couple of times in
succession to output the message for a CE/UE, therefore overwriting each
part of the message which was formatted with the previous snprintf()
call. As a result, only the part of the message from the last snprintf()
call will be printed.
The simplest and most effective way to fix this problem is to combine
the whole string into one which to supply to a single snprintf() call.
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Manish Narani <manish.narani@xilinx.com>
Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aec551c7a0 upstream.
Because of the i2c quirk we have the reset quirks named in a confusing
way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using
better naming later on.
Fixes: 4e23be473e ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1f3722643 upstream.
dma-buf name can be set via DMA_BUF_SET_NAME ioctl, but once set
it never gets freed.
Free it in dma_buf_release().
Fixes: bb2bb90304 ("dma-buf: add DMA_BUF_SET_NAME ioctls")
Reported-by: syzbot+b2098bc44728a4efb3e9@syzkaller.appspotmail.com
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Chenbo Feng <fengc@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227063204.5813-1-xiyou.wangcong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44f2f88290 upstream.
This is only called from adt7462_update_device(). The caller expects it
to return zero on error. I fixed a similar issue earlier in commit
a4bf06d58f ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0")
but I missed this one.
Fixes: c0b4e3ab0c ("adt7462: new hwmon driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78722d37b2 upstream.
The IPU1 functional clock is the output of a mux clock (represented
by ipu1_gfclk_mux previously) and the clock source for this has been
updated to be sourced from dpll_core_h22x2_ck in commit 39879c7d96
("ARM: dts: dra7xx-clocks: Source IPU1 functional clock from CORE DPLL").
ipu1_gfclk_mux is an obsolete clock now with the clkctrl conversion,
and this clock source parenting is lost during the new clkctrl layout
conversion.
Remove this stale clock and fix up the clock source for this mux
clock using the latest equivalent clkctrl clock. This restores the
previous logic and ensures that the IPU1 continues to run at the
same frequency of IPU2 and independent of the ABE DPLL.
Fixes: b5f8ffbb6f ("ARM: dts: dra7: convert to use new clkctrl layout")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31623468be upstream.
The commit 337c6c9a69 ("ARM: dts: am437x-idk-evm: Disable
OPP50 for MPU") adjusts couple of OPP nodes defined in the
common am4372.dtsi file, but used outdated node names. This
results in these getting treated as new OPP nodes with missing
properties.
Fix this properly by using the correct node names as updated in
commit b9cb2ba718 ("ARM: dts: Use - instead of @ for DT OPP
entries for TI SoCs").
Reported-by: Roger Quadros <rogerq@ti.com>
Fixes: 337c6c9a69 ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 512a928aff upstream.
This function is not only needed by the platform suspend code, but is also
reused as the CPU resume function when the ARM cores can be powered down
completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L).
Providing the static inline stub whenever CONFIG_SUSPEND is disabled means
that those platforms will hang on resume from cpuidle if suspend is disabled.
So there are two problems:
- The static inline stub masks the linker error
- The function is not available where needed
Fix both by just building the function unconditionally, when
CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long,
so it's arguably ok to just leave it in for all i.MX6 kernel configurations.
Fixes: 05136f0897 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 817a68a658 upstream.
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c14dfddbd8 upstream.
The algorithm pre-allocates a cm_id since allocation cannot be done while
holding the cm.lock spinlock, however it doesn't free it on one error
path, leading to a memory leak.
Fixes: 067b171b86 ("IB/cm: Share listening CM IDs")
Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02fbabd5f4 upstream.
There maybe an overshoot, when disabling, then re-enabling vrefbuf
too quickly. VREFBUF is used by ADC/DAC on some boards. When re-enabling
too quickly, an overshoot on the reference voltage make the conversions
inaccurate for a short period of time.
- Don't put the VREFBUF in HiZ when disabling, to force an active
discharge.
- Enforce a 1ms OFF/ON delay
Fixes: 0cdbf481e9 ("regulator: Add support for stm32-vrefbuf")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Message-Id: <1583312132-20932-1-git-send-email-fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 810dbc6908 upstream.
The dealloc_work_entries() function must update the work_free_list pointer
while freeing its entries, since potentially called again on same list. A
second iteration of the work list caused system crash. This happens, if
work allocation fails during cma_iw_listen() and free_cm_id() tries to
free the list again during cleanup.
Fixes: 922a8e9fb2 ("RDMA: iWARP Connection Manager.")
Link: https://lore.kernel.org/r/20200302181614.17042-1-bmt@zurich.ibm.com
Reported-by: syzbot+cb0c054eabfba4342146@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12e5eef0f4 upstream.
A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.
Fixes: bdcf26bf9b ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6affca140c upstream.
In case the SGL was mapped for P2P DMA operation, we must unmap it using
pci_p2pdma_unmap_sg during the error unwind of rdma_rw_ctx_init()
Fixes: 7f73eac3a7 ("PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()")
Link: https://lore.kernel.org/r/20200220100819.41860-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4103312d7 upstream.
This reverts commit 219d2e9dfd.
The call chain below requires the cm_id_priv's destination address to be
setup before performing rdma_bind_addr(). Otherwise source port allocation
fails as cma_port_is_unique() no longer sees the correct tuple to allow
duplicate users of the source port.
rdma_resolve_addr()
cma_bind_addr()
rdma_bind_addr()
cma_get_port()
cma_alloc_any_port()
cma_port_is_unique() <- compared with zero daddr
This can result in false failures to connect, particularly if the source
port range is restricted.
Fixes: 219d2e9dfd ("RDMA/cma: Simplify rdma_resolve_addr() error flow")
Link: https://lore.kernel.org/r/20200212072635.682689-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10e58a5d2 upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: 73feb4d0f8 ("soc: imx-scu: Add SoC UID(unique identifier) support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5bfeff446 upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: d90bf296ae ("firmware: imx: Add support to start/stop a CPU")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c1a1c814c upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: c800cd7824 ("firmware: imx: add SCU power domain driver")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e6a4eba69 upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y:
BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0
It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.
Fixes: 15e1f2bc8b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26c4b4758f upstream.
There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.
Remove the unexisting ethphy1 port.
This fixes a run-time warning:
mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.
Fixes: fdea904e85 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb0bbba763 upstream.
Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
The default module behaviour is to power VCCQ and VCC by the 3.3V power
rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc
power rail using a solder jumper.
Fixes: ddec5d1c00 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46b7edf1c7 upstream.
I've noticed that when writing data to the modem the writes can time out
at some point eventually. Looks like kicking the modem idle GPIO every
600 ms instead of once a second fixes the issue. Note that this rate is
different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS
that we still want to keep at 1 second, so let's add a separate define for
PHY_MDM6600_IDLE_KICK_MS.
Fixes: f7f50b2a7b ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be4e3c737e upstream.
We have an interrupt handler for the wake-up GPIO pin, but we're missing
the code to wake-up the system. This can cause timeouts receiving data
for the UART that shares the wake-up GPIO pin with the USB PHY.
All we need to do is just wake the system and kick the autosuspend
timeout to fix the issue.
Fixes: 5d1ebbda03 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4aaa44e8b upstream.
The assert_mmap_offset() returns type bool so if we return an error
pointer that is "return true;" or success. If we have an error, then
we should return false.
Fixes: 3d81d589d6 ("drm/i915: Test exhaustion of the mmap space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain
(cherry picked from commit efbf928824)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c725161924 upstream.
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e608)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4769905f0 upstream.
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed.
This means that those two mappings were never correct. Remove them.
Fixes: 60a3dcf96a ("drm/sun4i: Add DE2 definitions for YUV formats")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20896ef137 upstream.
DE2 VI layer doesn't support blending which means alpha channel is
ignored. Replace all formats with alpha with "don't care" (X) channel.
Fixes: 7480ba4d75 ("drm/sun4i: Add support for DE2 VI planes")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 169ca4b389 upstream.
DE3 VI layers support alpha blending, but DE2 VI layers do not.
Additionally, DE3 VI layers support 10-bit RGB and YUV formats.
Make a separate list for DE3.
Fixes: c50519e6db ("drm/sun4i: Add basic support for DE3")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>