migration_init() returns the return value of the hotplug notifier. In
the success case this is NOTIFY_OK which is 1. initcall_debug
evaluates that as an error code because init calls are expected to
return 0 on success.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
might_sleep() is called late-ish in cond_resched(), after the
need_resched()/preempt enabled/system running tests are
checked.
It's better to check the sleeps while atomic earlier and not
depend on some environment datas that reduce the chances to
detect a problem.
Also define cond_resched_*() helpers as macros, so that the
FILE/LINE reported in the sleeping while atomic warning
displays the real origin and not sched.h
Changes in v2:
- Call __might_sleep() directly instead of might_sleep() which
may call cond_resched()
- Turn cond_resched() into a macro so that the file:line
couple reported refers to the caller of cond_resched() and
not __cond_resched() itself.
Changes in v3:
- Also propagate this __might_sleep() pull up to
cond_resched_lock() and cond_resched_softirq()
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a preempt count base offset to compare against the current
preempt level count. It prepares to pull up the might_sleep
check from cond_resched() to cond_resched_lock() and
cond_resched_bh().
For these two helpers, we need to respectively ensure that once
we'll unlock the given spinlock / reenable local softirqs, we
will reach a sleepable state.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Move and rename preempt_count_equals() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cover the off case for __might_sleep(), so that we avoid
#ifdefs in files that make use of it. Especially, this prepares
for the __might_sleep() pull up on cond_resched().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the outdated comment from __cond_resched() related to
the now removed Big Kernel Semaphore.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The schedule() function is a loop that reschedules the current
task while the TIF_NEED_RESCHED flag is set:
void schedule(void)
{
need_resched:
/* schedule code */
if (need_resched())
goto need_resched;
}
And cond_resched() repeat this loop:
do {
add_preempt_count(PREEMPT_ACTIVE);
schedule();
sub_preempt_count(PREEMPT_ACTIVE);
} while(need_resched());
This loop is needless because schedule() already did the check
and nothing can set TIF_NEED_RESCHED between schedule() exit
and the loop check in need_resched().
Then remove this needless loop.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1247725694-6082-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new load average code clears rq->calc_load_active on
CPU_ONLINE. That's wrong as the new onlined CPU might have got a
scheduler tick already and accounted the delta to the stale value of
the time we offlined the CPU.
Clear the value when we cleanup the dead CPU instead.
Also move the update of the calc_load_update time for the newly online
CPU to CPU_UP_PREPARE to avoid that the CPU plays catch up with the
stale update time value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-sched:
sched: Fix bug in SCHED_IDLE interaction with group scheduling
sched: Fix rt_rq->pushable_tasks initialization in init_rt_rq()
sched: Reset sched stats on fork()
sched_rt: Fix overload bug on rt group scheduling
sched: Documentation/sched-rt-group: Fix style issues & bump version
Optimize cond_resched() by removing one conditional.
Currently cond_resched() checks system_state ==
SYSTEM_RUNNING in order to avoid scheduling before the
scheduler is running.
We can however, as per suggestion of Matt, use
PREEMPT_ACTIVE to accomplish that very same.
Suggested-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init_rt_rq() initializes only rq->rt.pushable_tasks, and not the
pushable_tasks field of the passed rt_rq. The plist is not used
uninitialized since the only pushable_tasks plists used are the
ones of root rt_rqs; anyway reinitializing the list on every group
creation corrupts the root plist, losing its previous contents.
Signed-off-by: Fabio Checconi <fabio@gandalf.sssup.it>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090615185638.GK21741@gandalf.sssup.it>
CC: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sched_stat fields are currently not reset upon fork.
Ingo's recent commit 6c594c21fc
did reset nr_migrations, but it didn't reset any of the
others.
This patch resets all sched_stat fields on fork.
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <193b0f820907090457s7a3662f4gcdecdc22fcae857b@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixes an easily triggerable BUG() when setting process affinities.
Make sure to count the number of migratable tasks in the same place:
the root rt_rq. Otherwise the number doesn't make sense and we'll hit
the BUG in set_cpus_allowed_rt().
Also, make sure we only count tasks, not groups (this is probably
already taken care of by the fact that rt_se->nr_cpus_allowed will be 0
for groups, but be more explicit)
Tested-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Gregory Haskins <ghaskins@novell.com>
LKML-Reference: <1247067476.9777.57.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This adds the synchronize_sched_expedited() primitive that
implements the "big hammer" expedited RCU grace periods.
This primitive is placed in kernel/sched.c rather than
kernel/rcupdate.c due to its need to interact closely with the
migration_thread() kthread.
The idea is to wake up this kthread with req->task set to NULL,
in response to which the kthread reports the quiescent state
resulting from the kthread having been scheduled.
Because this patch needs to fallback to the slow versions of
the primitives in response to some races with CPU onlining and
offlining, a new synchronize_rcu_bh() primitive is added as
well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Cc: davem@davemloft.net
Cc: dada1@cosmosbay.com
Cc: zbr@ioremap.net
Cc: jeff.chua.linux@gmail.com
Cc: paulus@samba.org
Cc: laijs@cn.fujitsu.com
Cc: jengelh@medozas.de
Cc: r000n@r000n.net
Cc: benh@kernel.crashing.org
Cc: mathieu.desnoyers@polymtl.ca
LKML-Reference: <12459460982947-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hide __raw_get_cpu_var() as well - thus all the direct
references to runqueues will abstracted out.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <20090629.144457.886429910353660979.mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are a few places where ___cacheline_aligned* is used with
DEFINE_PER_CPU(). Use DEFINE_PER_CPU_SHARED_ALIGNED() instead.
DEFINE_PER_CPU_SHARED_ALIGNED() applies alignment only on SMPs. While
all other converted places used _in_smp variant or only get compiled
for SMP, net/rds used unconditional ____cacheline_aligned. I don't
see any reason these data structures should be aligned on UP and thus
converted together.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andy Grover <andy.grover@oracle.com>
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
perfcounter: Handle some IO return values
perf_counter: Push perf_sample_data through the swcounter code
perf_counter tools: Define and use our own u64, s64 etc. definitions
perf_counter: Close race in perf_lock_task_context()
perf_counter, x86: Improve interactions with fast-gup
perf_counter: Simplify and fix task migration counting
perf_counter tools: Add a data file header
perf_counter: Update userspace callchain sampling uses
perf_counter: Make callchain samples extensible
perf report: Filter to parent set by default
perf_counter tools: Handle lost events
perf_counter: Add event overlow handling
fs: Provide empty .set_page_dirty() aop for anon inodes
perf_counter: tools: Makefile tweaks for 64-bit powerpc
perf_counter: powerpc: Add processor back-end for MPC7450 family
perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
perf_counter: powerpc: Change how processor-specific back-ends get selected
perf_counter: powerpc: Use unsigned long for register and constraint values
perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
perf_counter tools: Add and use isprint()
...
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix out of scope variable access in sched_slice()
sched: Hide runqueues from direct refer at source code level
sched: Remove unneeded __ref tag
sched, x86: Fix cpufreq + sched_clock() TSC scaling
The task migrations counter was causing rare and hard to decypher
memory corruptions under load. After a day of debugging and bisection
we found that the problem was introduced with:
3f731ca: perf_counter: Fix cpu migration counter
Turning them off fixes the crashes. Incidentally, the whole
perf_counter_task_migration() logic can be done simpler as well,
by injecting a proper sw-counter event.
This cleanup also fixed the crashes. The precise failure mode is
not completely clear yet, but we are clearly not unhappy about
having a fix ;-)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that kthread_stop() can be used even if the task has already exited,
we can kill the "wait_to_die:" loop in migration_thread(). But we must
pin rq->migration_thread after creation.
Actually, I don't think CPU_UP_CANCELED or CPU_DEAD should wait for
->migration_thread exit. Perhaps we can simplify this code a bit more.
migration_call() can set ->should_stop and forget about this thread. But
we need a new helper in kthred.c for that.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Those two functions no longer call alloc_bootmmem_cpumask_var(),
so no need to tag them with __init_refok.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <4A35DD5B.9050106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
This patch introduces a new flag SCHED_RESET_ON_FORK which can be passed
to the kernel via sched_setscheduler(), ORed in the policy parameter. If
set this will make sure that when the process forks a) the scheduling
priority is reset to DEFAULT_PRIO if it was higher and b) the scheduling
policy is reset to SCHED_NORMAL if it was either SCHED_FIFO or SCHED_RR.
Why have this?
Currently, if a process is real-time scheduled this will 'leak' to all
its child processes. For security reasons it is often (always?) a good
idea to make sure that if a process acquires RT scheduling this is
confined to this process and only this process. More specifically this
makes the per-process resource limit RLIMIT_RTTIME useful for security
purposes, because it makes it impossible to use a fork bomb to
circumvent the per-process RLIMIT_RTTIME accounting.
This feature is also useful for tools like 'renice' which can then
change the nice level of a process without having this spill to all its
child processes.
Why expose this via sched_setscheduler() and not other syscalls such as
prctl() or sched_setparam()?
prctl() does not take a pid parameter. Due to that it would be
impossible to modify this flag for other processes than the current one.
The struct passed to sched_setparam() can unfortunately not be extended
without breaking compatibility, since sched_setparam() lacks a size
parameter.
How to use this from userspace? In your RT program simply replace this:
sched_setscheduler(pid, SCHED_FIFO, ¶m);
by this:
sched_setscheduler(pid, SCHED_FIFO|SCHED_RESET_ON_FORK, ¶m);
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090615152714.GA29092@tango.0pointer.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
lguest needs kick_process: wake_up_process() does nothing if a process
is running, which isn't sufficient (we need it in the kernel).
And lguest support is usually modular.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
* 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits)
perf_counter: Turn off by default
perf_counter: Add counter->id to the throttle event
perf_counter: Better align code
perf_counter: Rename L2 to LL cache
perf_counter: Standardize event names
perf_counter: Rename enums
perf_counter tools: Clean up u64 usage
perf_counter: Rename perf_counter_limit sysctl
perf_counter: More paranoia settings
perf_counter: powerpc: Implement generalized cache events for POWER processors
perf_counters: powerpc: Add support for POWER7 processors
perf_counter: Accurate period data
perf_counter: Introduce struct for sample data
perf_counter tools: Normalize data using per sample period data
perf_counter: Annotate exit ctx recursion
perf_counter tools: Propagate signals properly
perf_counter tools: Small frequency related fixes
perf_counter: More aggressive frequency adjustment
perf_counter/x86: Fix the model number of Intel Core2 processors
perf_counter, x86: Correct some event and umask values for Intel processors
...
Lets not use the bootmem allocator in cpupri_init() as slab is already up when
it is run.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var().
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Now that kmem_cache_init() happens before sched_init(), we should use kzalloc()
and not the bootmem allocator.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
xen: cache cr0 value to avoid trap'n'emulate for read_cr0
xen/x86-64: clean up warnings about IST-using traps
xen/x86-64: fix breakpoints and hardware watchpoints
xen: reserve Xen start_info rather than e820 reserving
xen: add FIX_TEXT_POKE to fixmap
lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
xen: honour VCPU availability on boot
xen: add "capabilities" file
xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
xen/sys/hypervisor: change writable_pt to features
xen: add /sys/hypervisor support
xen/xenbus: export xenbus_dev_changed
xen: use device model for suspending xenbus devices
xen: remove suspend_cancel hook
xen/dev-evtchn: clean up locking in evtchn
xen: export ioctl headers to userspace
xen: add /dev/xen/evtchn driver
xen: add irq_from_evtchn
xen: clean up gate trap/interrupt constants
xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
...
This fixes the cpu migration software counter to count
correctly even when contexts get swapped from one task to
another. Previously the cpu migration counts reported by perf
stat were bogus, ranging from negative to several thousand for
a single "lat_ctx 2 8 32" run. With this patch the cpu
migration count reported for "lat_ctx 2 8 32" is almost always
between 35 and 44.
This fixes the problem by adding a call into the perf_counter
code from set_task_cpu when tasks are migrated. This enables
us to use the generic swcounter code (with some modifications)
for the cpu migration counter.
This modifies the swcounter code to allow a NULL regs pointer
to be passed in to perf_swcounter_ctx_event() etc. The cpu
migration counter does this because there isn't necessarily a
pt_regs struct for the task available. In this case, the
counter will not have interrupt capability - but the migration
counter didn't have interrupt capability before, so this is no
loss.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35006.819769.416327@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This arranges for perf_counter's notifier for cpu hotplug
operations to be called earlier than the migration notifier in
sched.c by increasing its priority to 20, compared to the 10
for the migration notifier. The reason for doing this is that
a subsequent commit to convert the cpu migration counter to use
the generic swcounter infrastructure will add a call into the
perf_counter subsystem when tasks get migrated. Therefore the
perf_counter subsystem needs a chance to initialize its per-cpu
data for the new cpu before it can get called from the
migration code.
This also adds a comment to the migration notifier noting that
its priority needs to be lower than that of the perf_counter
notifier.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18981.1900.792795.836858@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We call perf_adjust_freq() from perf_counter_task_tick() which
is is called under the rq->lock causing lock recursion.
However, it's no longer required to be called under the
rq->lock, so remove it from under it.
Also, fix up some related comments.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.476197912@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When monitoring a process and its descendants with a set of inherited
counters, we can often get the situation in a context switch where
both the old (outgoing) and new (incoming) process have the same set
of counters, and their values are ultimately going to be added together.
In that situation it doesn't matter which set of counters are used to
count the activity for the new process, so there is really no need to
go through the process of reading the hardware counters and updating
the old task's counters and then setting up the PMU for the new task.
This optimizes the context switch in this situation. Instead of
scheduling out the perf_counter_context for the old task and
scheduling in the new context, we simply transfer the old context
to the new task and keep using it without interruption. The new
context gets transferred to the old task. This means that both
tasks still have a valid perf_counter_context, so no special case
is introduced when the old task gets scheduled in again, either on
this CPU or another CPU.
The equivalence of contexts is detected by keeping a pointer in
each cloned context pointing to the context it was cloned from.
To cope with the situation where a context is changed by adding
or removing counters after it has been cloned, we also keep a
generation number on each context which is incremented every time
a context is changed. When a context is cloned we take a copy
of the parent's generation number, and two cloned contexts are
equivalent only if they have the same parent and the same
generation number. In order that the parent context pointer
remains valid (and is not reused), we increment the parent
context's reference count for each context cloned from it.
Since we don't have individual fds for the counters in a cloned
context, the only thing that can make two clones of a given parent
different after they have been cloned is enabling or disabling all
counters with prctl. To account for this, we keep a count of the
number of enabled counters in each context. Two contexts must have
the same number of enabled counters to be considered equivalent.
Here are some measurements of the context switch time as measured with
the lat_ctx benchmark from lmbench, comparing the times obtained with
and without this patch series:
-----Unmodified----- With this patch series
Counters: none 2 HW 4H+4S none 2 HW 4H+4S
2 processes:
Average 3.44 6.45 11.24 3.12 3.39 3.60
St dev 0.04 0.04 0.13 0.05 0.17 0.19
8 processes:
Average 6.45 8.79 14.00 5.57 6.23 7.57
St dev 1.27 1.04 0.88 1.42 1.46 1.42
32 processes:
Average 5.56 8.43 13.78 5.28 5.55 7.15
St dev 0.41 0.47 0.53 0.54 0.57 0.81
The numbers are the mean and standard deviation of 20 runs of
lat_ctx. The "none" columns are lat_ctx run directly without any
counters. The "2 HW" columns are with lat_ctx run under perfstat,
counting cycles and instructions. The "4H+4S" columns are lat_ctx run
under perfstat with 4 hardware counters and 4 software counters
(cycles, instructions, cache references, cache misses, task
clock, context switch, cpu migrations, and page faults).
[ Impact: performance optimization of counter context-switches ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10666.517218.332164@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Properly document the variable-size structure tricks we are doing
wrt. struct sched_group and sched_domain, and use the field[0] GCC
extension instead of defining a vla array.
Dont use unions for this, as pointed out by Linus.
[ Impact: cleanup, un-confuse Sparse and LLVM ]
Reported-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.01.0905180850110.3301@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
avenrun is an rough estimate so we don't have to worry about
consistency of the three avenrun values. Remove the xtime lock
dependency and provide a function to scale the values. Cleanup the
users.
[ Impact: cleanup ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Dimitri Sivanich noticed that xtime_lock is held write locked across
calc_load() which iterates over all online CPUs. That can cause long
latencies for xtime_lock readers on large SMP systems.
The load average calculation is an rough estimate anyway so there is
no real need to protect the readers vs. the update. It's not a problem
when the avenrun array is updated while a reader copies the values.
Instead of iterating over all online CPUs let the scheduler_tick code
update the number of active tasks shortly before the avenrun update
happens. The avenrun update itself is handled by the CPU which calls
do_timer().
[ Impact: reduce xtime_lock write locked section ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
This patch migrates all non pinned timers and hrtimers to the current
idle load balancer, from all the idle CPUs. Timers firing on busy CPUs
are not migrated.
While migrating hrtimers, care should be taken to check if migrating
a hrtimer would result in a latency or not. So we compare the expiry of the
hrtimer with the next timer interrupt on the target cpu and migrate the
hrtimer only if it expires *after* the next interrupt on the target cpu.
So, added a clockevents_get_next_event() helper function to return the
next_event on the target cpu's clock_event_device.
[ tglx: cleanups and simplifications ]
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
This patch creates the /proc/sys sysctl interface at
/proc/sys/kernel/timer_migration
Timer migration is enabled by default.
To disable timer migration, when CONFIG_SCHED_DEBUG = y,
echo 0 > /proc/sys/kernel/timer_migration
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
The following pinned hrtimers have been identified and marked:
1)sched_rt_period_timer
2)tick_sched_timer
3)stack_trace_timer_fn
[ tglx: fixup the hrtimer pinned mode ]
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Conflicts:
arch/frv/include/asm/pgtable.h
arch/x86/include/asm/required-features.h
arch/x86/xen/mmu.c
Merge reason: x86/xen was on a .29 base still, move it to a fresher
branch and pick up Xen fixes as well, plus resolve
conflicts
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
on a handful of tracing fixes present in .30-rc5-almost.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a thread is oom killed and fails to exit, it's helpful to know which
threads have access to memory reserves if the machine livelocks. This is
done by testing for the TIF_MEMDIE thread info flag and should be
displayed alongside stack traces to identify tasks that have access to
such reserves but are still stuck allocating pages, for instance.
It would probably be helpful in other cases as well, so all thread info
flags are emitted when showing a task.
( v2: fix warning reported by Stephen Rothwell )
[ Impact: extend debug printout info ]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <alpine.DEB.2.00.0905040136390.15831@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The orig_cpu parameter in trace_sched_migrate_task() is not necessary,
it can be got by using task_cpu(p) in the probe.
[ Impact: micro-optimization ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
[ modified from Mathieu's patch. The original patch is at:
http://marc.info/?l=linux-kernel&m=123791201716239&w=2 ]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: zhaolei@cn.fujitsu.com
Cc: laijs@cn.fujitsu.com
LKML-Reference: <49FFFDB7.1050402@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas noted that we should disallow sysctl_sched_rt_runtime == 0 for
(!RT_GROUP) since the root group always has some RT tasks in it.
Further, update the documentation to inspire clue.
[ Impact: exclude corner-case sysctl_sched_rt_runtime value ]
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090505155436.863098054@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
percpu scheduling for perfcounters wants to take the context lock,
but that lock first needs to be initialized. Currently it is an
early_initcall() - but that is too late, the task tick runs much
sooner than that.
Call it explicitly from the scheduler init sequence instead.
[ Impact: fix access-before-init crash ]
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andrew Gallatin reported that IRQ and SOFTIRQ times were
sometime not reported correctly on recent kernels, and even
bisected to commit 457533a7d3
([PATCH] fix scaled & unscaled cputime accounting) as the first
bad commit.
Further analysis pointed that commit
79741dd357 ([PATCH] idle cputime
accounting) was the real cause of the problem.
account_process_tick() was not taking into account timer IRQ
interrupting the idle task servicing a hard or soft irq.
On mostly idle cpu, irqs were thus not accounted and top or
mpstat could tell user/admin that cpu was 100 % idle, 0.00 %
irq, 0.00 % softirq, while it was not.
[ Impact: fix occasionally incorrect CPU statistics in top/mpstat ]
Reported-by: Andrew Gallatin <gallatin@myri.com>
Re-reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: rick.jones2@hp.com
Cc: brice@myri.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <49F84BC1.7080602@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a section to the memory barriers document to note the implied
memory barriers of sleep primitives (set_current_state() and wrappers)
and wake-up primitives (wake_up() and co.).
Also extend the in-code comments on the wake_up() functions to note
these implied barriers.
[ Impact: add documentation ]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20090428140138.1192.94723.stgit@warthog.procyon.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stephen Rothwell reported this build warning:
> kernel/sched.c: In function 'find_new_ilb':
> kernel/sched.c:4355: warning: passing argument 1 of '__first_cpu' from incompatible pointer type
>
> Possibly caused by commit f711f6090a
> ("sched: Nominate idle load balancer from a semi-idle package") from
> the sched tree. Should this call to first_cpu be cpumask_first?
For !(CONFIG_SCHED_MC || CONFIG_SCHED_SMT), find_new_ilb() nominates the
Idle load balancer as the first cpu from the nohz.cpu_mask.
This code uses the older API first_cpu(). Replace it with cpumask_first(),
which is the correct API here.
[ Impact: cleanup, address build warning ]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20090421031049.GA4140@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lai Jiangshan's patch reminded me that I promised Nick to remove
that extra call overhead in schedule().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090313112300.927414207@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This function was left orphan by the latest round of sw-counter
cleanups.
[ Impact: remove unused kernel function ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 46e0bb9c12 ("sched: Print sched_group::__cpu_power
in sched_domain_debug") produces a messy dmesg output while
attempting to print the sched_group::__cpu_power for each
group in the sched_domain hierarchy.
Fix this by avoid printing the __cpu_power for default cases.
(i.e, __cpu_power == SCHED_LOAD_SCALE).
[ Impact: reduce syslog clutter ]
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Fixed-by: Tony Luck <tony.luck@intel.com>
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20090414033936.GA534@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.
This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.
#define CREATE_TRACE_POINTS
#include <trace/mytrace.h>
This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.
Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.
#define CREATE_TRACE_POINTS
#include <trace/foo.h>
#include <trace/bar.h>
#include <trace/fido.h>
Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.
This patch converts sched, irq and lockdep and skb to use this new
method.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
'777c6c5 wait: prevent exclusive waiter starvation' made
__wake_up_common() global to be used from abort_exclusive_wait().
It was needed to do a wake-up with the waitqueue lock held while
passing down a key to the wake-up function.
Since '4ede816 epoll keyed wakeups: add __wake_up_locked_key() and
__wake_up_sync_key()' there is an appropriate wrapper for this case:
__wake_up_locked_key().
Use it here and make __wake_up_common() private to the scheduler
again.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1239720785-19661-1-git-send-email-hannes@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The CPU that first goes idle becomes the idle-load-balancer and remains
that until either it picks up a task or till all the CPUs of the system
goes idle.
Optimize this further to allow it to relinquish it's post
once all it's siblings in the power-aware sched_domain go idle, thereby
allowing the whole package-core to go idle. While relinquising the post,
nominate another an idle-load balancer from a semi-idle core/package.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090414045535.7645.31641.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the nomination of idle-load balancer is done by choosing the first
idle cpu in the nohz.cpu_mask. This may not be power-efficient, since
such an idle cpu could come from a completely idle core/package thereby
preventing the whole core/package from being in a low-power state.
For eg, consider a quad-core dual package system. The cpu numbering need
not be sequential and can something like [0, 2, 4, 6] and [1, 3, 5, 7].
With sched_mc/smt_power_savings and the power-aware IRQ balance, we try to keep
as fewer Packages/Cores active. But the current idle load balancer logic
goes against this by choosing the first_cpu in the nohz.cpu_mask and not
taking the system topology into consideration.
Improve the algorithm to nominate the idle load balancer from a semi idle
cores/packages thereby increasing the probability of the cores/packages being
in deeper sleep states for longer duration.
The algorithm is activated only when sched_mc/smt_power_savings != 0.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090414045530.7645.12175.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove overly redundant tracing entries
When tracer is "function" or "function_graph", way too much
"get_parent_ip" entries are recorded in ring_buffer.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D458B1.5000703@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* commit 'origin/master': (4825 commits)
Fix build errors due to CONFIG_BRANCH_TRACER=y
parport: Use the PCI IRQ if offered
tty: jsm cleanups
Adjust path to gpio headers
KGDB_SERIAL_CONSOLE check for module
Change KCONFIG name
tty: Blackin CTS/RTS
Change hardware flow control from poll to interrupt driven
Add support for the MAX3100 SPI UART.
lanana: assign a device name and numbering for MAX3100
serqt: initial clean up pass for tty side
tty: Use the generic RS485 ioctl on CRIS
tty: Correct inline types for tty_driver_kref_get()
splice: fix deadlock in splicing to file
nilfs2: support nanosecond timestamp
nilfs2: introduce secondary super block
nilfs2: simplify handling of active state of segments
nilfs2: mark minor flag for checkpoint created by internal operation
nilfs2: clean up sketch file
nilfs2: super block operations fix endian bug
...
Conflicts:
arch/x86/include/asm/thread_info.h
arch/x86/lguest/boot.c
drivers/xen/manage.c
Add a function to wait until some other task has been
switched out at least once.
This differs from wait_task_inactive() subtly, in that the
latter will wait until the task has left the CPU.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Cc: markus.t.metzger@gmail.com
Cc: roland@redhat.com
Cc: eranian@googlemail.com
Cc: oleg@redhat.com
Cc: juan.villacis@intel.com
Cc: ak@linux.jf.intel.com
LKML-Reference: <20090403144549.794157000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that all the task runtime clock users are gone, remove the ugly
rq->lock usage from perf counters, which solves the nasty deadlock
seen when a software task clock counter was read from an NMI overflow
context.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094518.531137582@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use the generic software events for context switches.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.283522645@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: we have gathered quite a few conflicts, need to merge upstream
Conflicts:
arch/powerpc/kernel/Makefile
arch/x86/ia32/ia32entry.S
arch/x86/include/asm/hardirq.h
arch/x86/include/asm/unistd_32.h
arch/x86/include/asm/unistd_64.h
arch/x86/kernel/cpu/common.c
arch/x86/kernel/irq.c
arch/x86/kernel/syscall_table_32.S
arch/x86/mm/iomap_32.c
include/linux/sched.h
kernel/Makefile
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
tracing, net: fix net tree and tracing tree merge interaction
tracing, powerpc: fix powerpc tree and tracing tree interaction
ring-buffer: do not remove reader page from list on ring buffer free
function-graph: allow unregistering twice
trace: make argument 'mem' of trace_seq_putmem() const
tracing: add missing 'extern' keywords to trace_output.h
tracing: provide trace_seq_reserve()
blktrace: print out BLK_TN_MESSAGE properly
blktrace: extract duplidate code
blktrace: fix memory leak when freeing struct blk_io_trace
blktrace: fix blk_probes_ref chaos
blktrace: make classic output more classic
blktrace: fix off-by-one bug
blktrace: fix the original blktrace
blktrace: fix a race when creating blk_tree_root in debugfs
blktrace: fix timestamp in binary output
tracing, Text Edit Lock: cleanup
tracing: filter fix for TRACE_EVENT_FORMAT events
ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
x86: kretprobe-booster interrupt emulation code fix
...
Fix up trivial conflicts in
arch/parisc/include/asm/ftrace.h
include/linux/memory.h
kernel/extable.c
kernel/module.c
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
cpumask: remove cpumask allocation from idle_balance, fix
numa, cpumask: move numa_node_id default implementation to topology.h, fix
cpumask: remove cpumask allocation from idle_balance
x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
x86: microcode: cleanup
x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
numa, cpumask: move numa_node_id default implementation to topology.h
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
cpumask: remove x86 cpumask_t uses.
cpumask: use cpumask_var_t in uv_flush_tlb_others.
cpumask: remove cpumask_t assignment from vector_allocation_domain()
cpumask: make Xen use the new operators.
cpumask: clean up summit's send_IPI functions
cpumask: use new cpumask functions throughout x86
x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
x86: unify 32 and 64-bit node_to_cpumask_map
...
* 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
s390: remove arch specific smp_send_stop()
panic: clean up kernel/panic.c
panic, smp: provide smp_send_stop() wrapper on UP too
panic: decrease oops_in_progress only after having done the panic
generic-ipi: eliminate WARN_ON()s during oops/panic
generic-ipi: cleanups
generic-ipi: remove CSD_FLAG_WAIT
generic-ipi: remove kmalloc()
generic IPI: simplify barriers and locking
This patchset introduces wakeup hints for some of the most popular (from
epoll POV) devices, so that epoll code can avoid spurious wakeups on its
waiters.
The problem with epoll is that the callback-based wakeups do not, ATM,
carry any information about the events the wakeup is related to. So the
only choice epoll has (not being able to call f_op->poll() from inside the
callback), is to add the file* to a ready-list and resolve the real events
later on, at epoll_wait() (or its own f_op->poll()) time. This can cause
spurious wakeups, since the wake_up() itself might be for an event the
caller is not interested into.
The rate of these spurious wakeup can be pretty high in case of many
network sockets being monitored.
By allowing devices to report the events the wakeups refer to (at least
the two major classes - POLLIN/POLLOUT), we are able to spare useless
wakeups by proper handling inside the epoll's poll callback.
Epoll will have in any case to call f_op->poll() on the file* later on,
since the change to be done in order to have the full event set sent via
wakeup, is too invasive for the way our f_op->poll() system works (the
full event set is calculated inside the poll function - there are too many
of them to even start thinking the change - also poll/select would need
change too).
Epoll is changed in a way that both devices which send event hints, and
the ones that don't, are correctly handled. The former will gain some
efficiency though.
As a general rule for devices, would be to add an event mask by using
key-aware wakeup macros, when making up poll wait queues. I tested it
(together with the epoll's poll fix patch Andrew has in -mm) and wakeups
for the supported devices are correctly filtered.
Test program available here:
http://www.xmailserver.org/epoll_test.c
This patch:
Nothing revolutionary here. Just using the available "key" that our
wakeup core already support. The __wake_up_locked_key() was no brainer,
since both __wake_up_locked() and __wake_up_locked_key() are thin wrappers
around __wake_up_common().
The __wake_up_sync() function had a body, so the choice was between
borrowing the body for __wake_up_sync_key() and calling it from
__wake_up_sync(), or make an inline and calling it from both. I chose the
former since in most archs it all resolves to "mov $0, REG; jmp ADDR".
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: William Lee Irwin III <wli@movementarian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: extend debug info /proc/sched_debug
If the user changes the value of the sched_mc/smt_power_savings sysfs
tunable, it'll trigger a rebuilding of the whole sched_domain tree,
with the SD_POWERSAVINGS_BALANCE flag set at certain levels.
As a result, there would be a change in the __cpu_power of sched_groups
in the sched_domain hierarchy.
Print the __cpu_power values for each sched_group in sched_domain_debug
to help verify this change and correlate it with the change in the
load-balancing behavior.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090330045520.2869.24777.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add per-cgroup cpuacct controller statistics like the system and user
time consumed by the group of tasks.
Changelog:
v7
- Changed the name of the statistic from utime to user and from stime to
system so that in future we could easily add other statistics like irq,
softirq, steal times etc easily.
v6
- Fixed a bug in the error path of cpuacct_create() (pointed by Li Zefan).
v5
- In cpuacct_stats_show(), use cputime64_to_clock_t() since we are
operating on a 64bit variable here.
v4
- Remove comments in cpuacct_update_stats() which explained why rcu_read_lock()
was needed (as per Peter Zijlstra's review comments).
- Don't say that percpu_counter_read() is broken in Documentation/cpuacct.txt
as per KAMEZAWA Hiroyuki's review comments.
v3
- Fix a small race in the cpuacct hierarchy walk.
v2
- stime and utime now exported in clock_t units instead of msecs.
- Addressed the code review comments from Balbir and Li Zefan.
- Moved to -tip tree.
v1
- Moved the stime/utime accounting to cpuacct controller.
Earlier versions
- http://lkml.org/lkml/2009/2/25/129
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
LKML-Reference: <20090331043222.GA4093@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Regression fix (against clock_gettime() backwarding bug)
This patch re-introduces a couple of functions, task_sched_runtime
and thread_group_sched_runtime, which was once removed at the
time of 2.6.28-rc1.
These functions protect the sampling of thread/process clock with
rq lock. This rq lock is required not to update rq->clock during
the sampling.
i.e.
The clock_gettime() may return
((accounted runtime before update) + (delta after update))
that is less than what it should be.
v2 -> v3:
- Rename static helper function __task_delta_exec()
to do_task_delta_exec() since -tip tree already has
a __task_delta_exec() of different version.
v1 -> v2:
- Revises comments of function and patch description.
- Add note about accuracy of thread group's runtime.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org [2.6.28.x][2.6.29.x]
LKML-Reference: <49D1CC93.4080401@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix cgroups race under rcu-preempt
cpuacct_charge() obtains task's ca and does a hierarchy walk upwards.
This can race with the task's movement between cgroups. This race
can cause an access to freed ca pointer in cpuacct_charge() or access
to invalid cgroups pointer of the task. This will not happen with rcu or
tree rcu as cpuacct_charge() is called with preemption disabled. However if
rcupreempt is used, the race is seen. Thanks to Li Zefan for explaining this.
Fix this race by explicitly protecting ca and the hierarchy walk with
rcu_read_lock().
Changes for v2:
- Update patch descrition (as per Li Zefan's review comments).
- Remove comments in cpuacct_charge() which explained why rcu_read_lock()
was needed (as per Peter Zijlstra's review comments).
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It appears I inadvertly introduced rq->lock recursion to the
hrtimer_start() path when I delegated running already expired
timers to softirq context.
This patch fixes it by introducing a __hrtimer_start_range_ns()
method that will not use raise_softirq_irqoff() but
__raise_softirq_irqoff() which avoids the wakeup.
It then also changes schedule() to check for pending softirqs and
do the wakeup then, I'm not quite sure I like this last bit, nor
am I convinced its really needed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
LKML-Reference: <20090313112301.096138802@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix lazy context switch API
Pass the previous and next tasks into the context switch start
end calls, so that the called functions can properly access the
task state (esp in end_context_switch, in which the next task
is not yet completely current).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Impact: simplification, prepare for later changes
Make lazy cpu mode more specific to context switching, so that
it makes sense to do more context-switch specific things in
the callbacks.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fix kernel-doc errors in sched.c: the structs don't have
kernel-doc notation and the short function description needs to
be one line only.
Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats '
Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats '
Error(kernel/sched.c:3375): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: cleanup
Add /** style comments around find_busiest_group(). Also add a few
explanatory comments.
This concludes the find_busiest_group() cleanup. The function is
now down to 72 lines from the original 313 lines.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091427.13992.18933.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create seperate helper functions to initialize the
power-savings-balance related variables, to update them and
to check if we have a scope for performing power-savings balance.
Add no-op inline functions for the !(CONFIG_SCHED_MC || CONFIG_SCHED_SMT)
case.
This will eliminate all the #ifdef jungle in find_busiest_group() and the
other helper functions.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091422.13992.73616.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, micro-optimization
We don't need to perform power_savings balance if either the
cpu is NOT_IDLE or if the sched_domain doesn't contain the
SD_POWERSAVINGS_BALANCE flag set.
Currently, we check for these conditions multiple number of
times, even though these variables don't change over the scope
of find_busiest_group().
Check once, and store the value in the already exiting
"power_savings_balance" variable.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091417.13992.2657.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all the imbalance calculation out of find_busiest_group()
through this helper function.
With this change, the structure of find_busiest_group() will be
as follows:
- update_sched_domain_statistics.
- check if imbalance exits.
- update imbalance and return busiest.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091411.13992.43293.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
We have two places in find_busiest_group() where we need to calculate
the minor imbalance before returning the busiest group. Encapsulate
this functionality into a seperate helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091406.13992.54316.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sd_lb_stats() to update the
various sched_domain related statistics in find_busiest_group().
With this we would have moved all the statistics computation out of
find_busiest_group().
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091401.13992.88737.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently we use a lot of local variables in find_busiest_group()
to capture the various statistics related to the sched_domain.
Group them together into a single data structure.
This will help us to offload the job of updating the sched_domain
statistics to a helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091356.13992.25970.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sg_lb_stats() which
can be invoked to calculate the individual group's statistics
in find_busiest_group().
This reduces the lenght of find_busiest_group() considerably.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Aked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091351.13992.43461.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently a whole bunch of variables are used to store the
various statistics pertaining to the groups we iterate over
in find_busiest_group().
Group them together in a single data structure and add
appropriate comments.
This will be useful later on when we create helper functions
to calculate the sched_group statistics.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091345.13992.20099.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Some indentations in find_busiest_group() can minimized by using
early exits with the help of gotos. This improves readability in
a couple of cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091340.13992.45062.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently the load idx calculation code is in find_busiest_group().
Move that to a static inline helper function.
Similary, to find the first cpu of a sched_group we use
cpumask_first(sched_group_cpus(group))
Use a helper to that. It improves readability in some cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091335.13992.55424.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, new schedstat ABI
Since they are used on in statistics and are always set to zero, the
following fields from struct rq have been removed: yld_exp_empty,
yld_act_empty and yld_both_empty.
Both Sched Debug and SCHEDSTAT_VERSION versions has also been
incremented since ABIs have been changed.
The schedtop tool has been updated to properly handle new version of
schedstat:
http://rt.wiki.kernel.org/index.php/Schedtop_utility
Signed-off-by: Luis Henriques <henrix@sapo.pt>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090324221002.GA10061@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix circular locking
Steven reports a circular locking from alloc_cpumask_var doing
a wakeup. We get rid of this using the tried-and-true technique
of using a per-cpu cpumask_var_t rather than doing an alloc
every time.
Simpler and more robust than a rare, implicit allocation within
an atomic codepath.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <alpine.DEB.2.00.0903181729360.31583@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There were 3 invocations of task_hot() in can_migrate_task().
Replace these 3 invocations by only one invocation, cached in
a local variable.
Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195902.GA6197@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixed typos in function documentation.
Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195809.GA6073@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This is presumably what those definitions are for, and while all archs
define cpu_core_map/cpu_sibling map, that's changing (eg. x86 wants to
change it to a pointer).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: more precise avg_overlap metric - better load-balancing
avg_overlap is used to measure the runtime overlap of the waker and
wakee.
However, when a process changes behaviour, eg a pipe becomes
un-congested and we don't need to go to sleep after a wakeup
for a while, the avg_overlap value grows stale.
When running we use the avg runtime between preemption as a
measure for avg_overlap since the amount of runtime can be
correlated to cache footprint.
The longer we run, the less likely we'll be wanting to be
migrated to another CPU.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236709131.25234.576.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimization
We can avoid the sched domain walk on try_to_wake_up() when we know
there are no groups.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236603381.8389.455.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use test_tsk_need_resched(), set_tsk_need_resched(), need_resched()
instead of using TIF_NEED_RESCHED.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <49B10BA4.9070209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix function graph trace hang / drop pointless softirq on UP
While debugging a function graph trace hang on an old PII, I saw
that it consumed most of its time on the timer interrupt. And
the domain rebalancing softirq was the most concerned.
The timer interrupt calls trigger_load_balance() which will
decide if it is worth to schedule a rebalancing softirq.
In case of builtin UP kernel, no problem arises because there is
no domain question.
In case of builtin SMP kernel running on an SMP box, still no
problem, the softirq will be raised each time we reach the
next_balance time.
In case of builtin SMP kernel running on a UP box (most distros
provide default SMP kernels, whatever the box you have), then
the CPU is attached to the NULL sched domain. So a kind of
unexpected behaviour happen:
trigger_load_balance() -> raises the rebalancing softirq later
on softirq: run_rebalance_domains() -> rebalance_domains() where
the for_each_domain(cpu, sd) is not taken because of the NULL
domain we are attached at. Which means rq->next_balance is never
updated. So on the next timer tick, we will enter
trigger_load_balance() which will always reschedule() the
rebalacing softirq:
if (time_after_eq(jiffies, rq->next_balance))
raise_softirq(SCHED_SOFTIRQ);
So for each tick, we process this pointless softirq.
This patch fixes it by checking if we are attached to the null
domain before raising the softirq, another possible fix would be
to set the maximal possible JIFFIES value to rq->next_balance if
we are attached to the NULL domain.
v2: build fix on UP
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af242d.1c07d00a.32d5.ffffc019@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimization
Parameter "prev" is not used really.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hung task with certain (non-default) rt-limit settings
Corey Hickey reported that on using setuid to change the uid of a
rt process, the process would be unkillable and not be running.
This is because there was no rt runtime for that user group. Add
in a check to see if a user can attach an rt task to its task group.
On failure, return EINVAL, which is also returned in
CONFIG_CGROUP_SCHED.
Reported-by: Corey Hickey <bugfood-ml@fatooh.org>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix incorrect condition check
No need to start rt bandwidth timer when rt bandwidth is disabled.
If this timer starts, it may stop at sched_rt_period_timer() on the first time.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpuacct_charge() is in fast-path, and checking of !cpuacct_susys.active
always returns false after cpuacct has been initialized at system boot.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework
the code so that we can use CSD_FLAG_LOCK for both purposes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
There are two allocated per-cpu accessor macros with almost identical
spelling. The original and far more popular is per_cpu_ptr (44
files), so change over the other 4 files.
tj: kill percpu_ptr() and update UP too
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: mingo@redhat.com
Cc: lenb@kernel.org
Cc: cpufreq@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
#define TASK_NICE(p) PRIO_TO_NICE((p)->static_prio)
So it's better to use TASK_NICE here.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: struct rq size optimization
The idle_at_tick in struct rq is only used in SMP settings
and it does not make sense to have this in the rq in an UP setup.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: fix TIMER_ABSTIME for process wide cpu timers
timers: split process wide cpu clocks/timers, fix
x86: clean up hpet timer reinit
timers: split process wide cpu clocks/timers, remove spurious warning
timers: split process wide cpu clocks/timers
signal: re-add dead task accumulation stats.
x86: fix hpet timer reinit for x86_64
sched: fix nohz load balancer on cpu offline
Intel reported a 10% regression (mysql+sysbench) on a 16-way machine
with these patches:
1596e29: sched: symmetric sync vs avg_overlap
d942fb6: sched: fix sync wakeups
Revert them.
Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Bisected-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar