commit c366b3dbba upstream.
Klaus Ethgen reported occasional high CPU usages in his system that
seem caused by HD-audio driver. The perf output revealed that it's
in the unsolicited event handling in the workqueue, and the problem
seems triggered by some communication stall between the controller and
the codec at the runtime or system resume.
Actually a similar phenomenon was seen in the past for other Intel
platforms, and we already applied the workaround to enforce sync-write
for CORB/RIRB verbs for Skylake and newer chipsets (commit
2756d9143a "ALSA: hda - Fix intermittent CORB/RIRB stall on Intel
chips"). Fortunately, the same workaround is applicable to the old
chipset, and the experiment showed the positive effect.
Based on the experiment result, this patch enables the sync-write
workaround for all Intel chipsets. The only reason I hesitated to
apply this workaround was about the possibly slightly higher CPU usage.
But if the lack of sync causes a much severer problem even for quite
old chip, we should think this would be necessary for all Intel chips.
Reported-by: Klaus Ethgen <Klaus@ethgen.ch>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191223171833.GA17053@chua
Link: https://lore.kernel.org/r/20191223221816.32572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92adc96f8e upstream.
Recently we found the headset-mic on the Dell Dock WD19 doesn't work
anymore after s3 (s2i or deep), this problem could be workarounded by
closing (pcm_close) the app and then reopening (pcm_open) the app, so
this bug is not easy to be detected by users.
When problem happens, retire_capture_urb() could still be called
periodically, but the size of captured data is always 0, it could be
a firmware bug on the dock. Anyway I found after resuming, the
snd_usb_pcm_prepare() will be called, and if we forcibly run
set_format() to set the interface and its endpoint, the capture
size will be normal again. This problem and workaound also apply to
playback.
To fix it in the kernel, add a quirk to let set_format() run
forcibly once after resume.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0141254b0a upstream.
Make sure to check the return value of usb_altnum_to_altsetting() to
avoid dereferencing a NULL pointer when the requested alternate settings
is missing.
The format altsetting number may come from a quirk table and there does
not seem to be any other validation of it (the corresponding index is
checked however).
Fixes: b099b9693d ("ALSA: usb-audio: Avoid superfluous usb_set_interface() calls")
Cc: stable <stable@vger.kernel.org> # 4.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191220093134.1248-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0aec96f589 upstream.
Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.
This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 475feec0c4 ]
We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better. But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.
OK, OK, let's be softy, downgrade it to the standard dev_err() again.
Fixes: dd65f7e19c ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2cd795c4e ]
The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which
is without the volume control. I do not see a reason to use DAC2,
because the shared output to all speakers produces the sufficient
and well balanced sound. The stereo support is enough for this
purpose (laptop).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bacd861452 ]
Nvidia proprietary driver doesn't support runtime power management, so
when a user only wants to use the integrated GPU, it's a common practice
to let dGPU not to bind any driver, and let its upstream port to be
runtime suspended. At the end of runtime suspension the port uses
platform power management to disable power through _OFF method of power
resource, which is listed by _PR3.
After commit b516ea586d ("PCI: Enable NVIDIA HDA controllers"), when
the dGPU comes with an HDA function, the HDA won't be suspended if the
dGPU is unbound, so the power resource can't be turned off by its
upstream port driver.
Commit 37a3a98ef6 ("ALSA: hda - Enable runtime PM only for
discrete GPU") only allows HDA to be runtime suspended once GPU is
bound, to keep APU's HDA working.
However, HDA on dGPU isn't that useful if dGPU is not bound to any
driver. So let's relax the runtime suspend requirement for dGPU's HDA
function, to disable the power source to save lots of power.
BugLink: https://bugs.launchpad.net/bugs/1840835
Fixes: b516ea586d ("PCI: Enable NVIDIA HDA controllers")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20191018073848.14590-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48e01504cf ]
ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.
Fixes: 436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e79c22695a ]
Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cca59516d ]
This reverts commit 957ce0c6b8 (ASoC: soc-pcm: check symmetry after
hw_params).
That commit cause soc_pcm_params_symmetry can't take effect.
cpu_dai->rate, cpu_dai->channels and cpu_dai->sample_bits
are updated in the middle of soc_pcm_hw_params, so move
soc_pcm_params_symmetry to the end of soc_pcm_hw_params is
not a good solution, for judgement of symmetry in the function
is always true.
FIXME:
According to the comments of that commit, I think the case
described in the commit should disable symmetric_rates
in Back-End, rather than changing the position of
soc_pcm_params_symmetry.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1573555602-5403-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb887709e ]
When the Acer Switch 10 SW5-012 quirk was added we did not have
jack-detection support yet; and the builtin microphone selection of
the original quirk is wrong too.
Fix the microphone-input quirk and add jack-detection info so that the
internal-microphone and headphone/set jack on the Switch 10 work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191119145138.59162-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1176bbb70 ]
The driver forgets to call pm_runtime_disable in remove and
probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dab09be49 ]
This driver misses calls to pm_runtime_disable and regulator_bulk_disable
in remove and a call to free_irq in probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9149b8c00 ]
The current code assumes that the power is turned off in
SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't
turned off and the registers are not reset to their default values but
the regcache is still marked as dirty. Thus a value might not be written
to the hardware if it is set to the default value. Do a software reset
before turning off the power to make sure the registers are always reset
to their default states.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2db787bdc ]
On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eabf424f7b ]
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.
Marking MX-64h as volatile in regmap solved the issue.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdea53fe5d ]
The fuzzer tries to open the timer instances as much as possible, and
this may cause a system hiccup easily. We've already introduced the
cap for the max number of available instances for the h/w timers, and
we should put such a limit also to the slave timers, too.
This patch introduces the limit to the multiple opened slave timers.
The upper limit is hard-coded to 1000 for now, which should suffice
for any practical usages up to now.
Link: https://lore.kernel.org/r/20191106154257.5853-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eee2b3f60 ]
Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST
to trigger the BE DAI's before the FE DAI's. This prevents the
xruns seen on playback pipelines using the link DMA.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9ad754684 ]
updated solution to the problem reported with randconfig:
CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:
sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'
use def_trisate to propagate the right settings without select.
Fixes: f4df4e4042 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6111fd2370 ]
The check for the mmap support via hw_support_mmap() function misses
the case where the device is with SNDRV_DMA_TYPE_DEV_UC, which should
have been treated equally as SNDRV_DMA_TYPE_DEV. Let's fix it.
Note that this bug doesn't hit any practical problem, because
SNDRV_DMA_TYPE_DEV_UC is used only for x86-specific drivers
(snd-hda-intel and snd-intel8x0) for the specific platforms that need
the non-cached buffers. And, on such platforms, hw_support_mmap()
already returns true in anyway. That's the reason I didn't put
Cc-to-stable mark here. This is only for any theoretical future
extension.
Fixes: 425da15970 ("ALSA: pcm: use dma_can_mmap() to check if a device supports dma_mmap_*")
Fixes: 42e748a0b3 ("ALSA: memalloc: Add non-cached buffer type")
Link: https://lore.kernel.org/r/20191104101115.27311-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3eabe939a ]
As long as I investigated, some devices with BeBoB protocol version 1
can be freezed during several hundreds milliseconds after breaking
connections. When accessing during the freezed time, any transaction
is corrupted. In the worst case, the device is going to reboot.
I can see this issue in:
* Roland FA-66
* M-Audio FireWire Solo
This commit expands sleep just after breaking connections to avoid
the freezed time as much as possible. I note that the freeze/reboot
behaviour is similar to below models:
* Focusrite Saffire Pro 10 I/O
* Focusrite Saffire Pro 26 I/O
The above models certainly reboot after breaking connections.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191101131323.17300-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed646dc3f ]
dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.
static int dpcm_prune_paths(...)
{
...
(1) for_each_dpcm_be(fe, stream, dpcm) {
...
^ widget = dai_get_widget(...);
|
(A) if (widget && widget_in_list(...))
| (a) continue;
v
^ (2) for_each_rtd_codec_dai(...) {
| widget = dai_get_widget(...);
(B)
| if (widget && widget_in_list(...))
v (b) continue;
}
...
Fixes: 2e5894d737 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3416e7144 ]
Align SOF HDA implementation with snd-hda-intel driver and enable
sync_write flag for all supported Intel platforms in SOF. When set,
a sync is issued after each verb write.
Sync after write has helped to overcome intermittent delays in
system resume flow on Intel Coffee Lake systems, and most recently
probe errors related to the HDMI codec on Ice Lake systems.
Matches the snd-hda-intel driver change done in commit 2756d9143a
("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips").
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 42fb6b1d41 upstream.
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes: 15c2b3cc09 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb04fc3b6b upstream.
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 377bc0cfab upstream.
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit add9d56d7b upstream.
The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.
Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback. Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.
Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fd739c04f upstream.
The commit e38e486d66 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices. Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.
This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.
Fixes: e38e486d66 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5815bdfd7f upstream.
After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe965096c9 upstream.
Audmix support two substream, When two substream start
to run, the trigger function may be called by two substream
in same time, that the priv->tdms may be updated wrongly.
The expected priv->tdms is 0x3, but sometimes the
result is 0x2, or 0x1.
Fixes: be1df61cf0 ("ASoC: fsl: Add Audio Mixer CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1e706afe53fdd1fbbbc79277c48a98f8416ba873.1573458378.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f157d4ff0 upstream.
Check for existance of jack before tracing.
NULL pointer dereference has been reported by KASAN while unloading
machine driver (snd_soc_cnl_rt274).
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe23be2d85 upstream.
Had a typo in e7cfd867fd that resulted in buddy jack support not being
fixed.
Fixes: e7cfd867fd ("ASoC: rt5645: Fixed buddy jack support.")
Signed-off-by: Jacob Rasmussen <jacobraz@google.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Cc: <jacobraz@google.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191114232011.165762-1-jacobraz@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7cfd867fd upstream.
The headphone jack on buddy was broken with the following commit:
commit 6b5da66322 ("ASoC: rt5645: read jd1_1 status for jd
detection").
This changes the jd_mode for buddy to 4 so buddy can read from the same
register that was used in the working version of this driver without
affecting any other devices that might use this, since no other device uses
jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying
audio works.
Signed-off-by: Jacob Rasmussen <jacobraz@google.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca58f55108 ]
This is an alternative fix attemp for the issue reported in the commit
caa8422d01 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions. Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e38e486d66 upstream.
The recent commit in HD-audio stream management for changing the
stripe control seems causing a regression on some platforms. The
stripe control is currently used only by HDMI codec, and applying the
stripe mask unconditionally may lead to scratchy and static noises as
seen on some MacBooks.
For addressing the regression, this patch changes the stream
management code to apply the stripe mask conditionally only when the
codec driver requested.
Fixes: 9b6f7e7a29 ("ALSA: hda: program stripe bits for controller")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Tested-by: Michael Pobega <mpobega@neverware.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e190de6941 upstream.
Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cc8d6505a upstream.
syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.
Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.
Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 336820c437 upstream.
We've added the bass speaker support on Acer 8951G by the commit
00066e9733 ("Add Acer Aspire Ethos 8951G model quirk"), but it seems
that the GPIO pin was wrongly set: while the commit turns off the bit
to power up the amp, the actual hardware reacts other way round,
i.e. GPIO bit on = amp on.
So this patch fixes the bug, turning on the GPIO bit 0x02 as default.
Since turning on the GPIO bit can be more easily managed with
alc_setup_gpio() call, we simplify the quirk code by integrating the
GPIO setup into the existing alc662_fixup_aspire_ethos_hp() and
dropping the whole ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER quirk.
Fixes: 00066e9733 ("Add Acer Aspire Ethos 8951G model quirk")
Reported-and-tested-by: Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191128202630.6626-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1e8c1fdce upstream.
headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.
Fixes: 4344aec84b ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a706 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 436e25505f upstream.
Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.
Fixes: 60083f9e94 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a858e79c9 upstream.
The old Nvidia chips have multiple HD-audio codecs on the same
HD-audio controller, and this doesn't work as expected with the current
audio component binding that is implemented under the one-codec-per-
controller assumption; at the probe time, the driver leads to several
kernel WARNING messages.
For the proper support, we may change the pin2port and port2pin to
traverse the codec list per the given pin number, but this needs more
development and testing.
As a quick workaround, instead, this patch drops the binding in the
audio side for these legacy chips since the audio component support in
nouveau graphics driver is still not merged (hence it's basically
unused).
[ Unlike the original commit, this patch actually disables the audio
component binding for all Nvidia chips, not only for legacy chips.
It doesn't matter much, though: nouveau gfx driver still doesn't
provide the audio component binding on 5.4.y, so it's only a
placeholder for now. Also, another difference from the original
commit is that this removes the nvhdmi_audio_ops and other
definitions completely in order to avoid a compile warning due to
unused stuff. -- tiwai ]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205625
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132000.4460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce3cba788a upstream.
The s6i6_gen2_info.ports[] array had the Mixer and PCM port type
entries in the wrong place. Use designators to explicitly specify the
array elements being set.
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191110134356.GA31589@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9435f2bb66 upstream.
snd_usb_mixer_controls_badd() that parses UAC3 BADD profiles misses a
NULL check for the given interfaces. When a malformed USB descriptor
is passed, this may lead to an Oops, as spotted by syzkaller.
Skip the iteration if the interface doesn't exist for avoiding the
crash.
Fixes: 17156f23e9 ("ALSA: usb: add UAC3 BADD profiles support")
Reported-by: syzbot+a36ab65c6653d7ccdd62@syzkaller.appspotmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122112840.24797-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recently introduced unit descriptor validation had some bug for
processing and extension units, it counts a bControlSize byte twice so
it expected a bigger size than it should have been. This seems
resulting in a probe error on a few devices.
Fix the calculation for proper checks of PU and EU.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 60849562a5 ("ALSA: usb-audio: Fix possible NULL
dereference at create_yamaha_midi_quirk()") added NULL checks in
create_yamaha_midi_quirk(), but there was an overlook. The code
allows one of either injd or outjd is NULL, but the second if check
made returning -ENODEV if any of them is NULL. Fix it in a proper
form.
Fixes: 60849562a5 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the nullity check for `substream->runtime` is outside of the lock
region, it is possible to have a null runtime in the critical section
if snd_pcm_detach_substream is called right before the lock.
Signed-off-by: paulhsia <paulhsia@chromium.org>
Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang