1
0
Fork 0
Commit Graph

1440 Commits (1c30844d2dfe272d58c8fc000960b835d13aa2ac)

Author SHA1 Message Date
Mel Gorman 1c30844d2d mm: reclaim small amounts of memory when an external fragmentation event occurs
An external fragmentation event was previously described as

    When the page allocator fragments memory, it records the event using
    the mm_page_alloc_extfrag event. If the fallback_order is smaller
    than a pageblock order (order-9 on 64-bit x86) then it's considered
    an event that will cause external fragmentation issues in the future.

The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system.  This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.

This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs.  The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared.  When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event.  kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance.  Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.

This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".

1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------

4.20-rc3 extfrag events < order 9:   804694
4.20-rc3+patch:                      408912 (49% reduction)
4.20-rc3+patch1-4:                    18421 (98% reduction)

                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-1      653.58 (   0.00%)      652.71 (   0.13%)
Amean     fault-huge-1        0.00 (   0.00%)      178.93 * -99.00%*

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-1        0.00 (   0.00%)        5.12 ( 100.00%)

Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel.  The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.

1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  291392
4.20-rc3+patch:                     191187 (34% reduction)
4.20-rc3+patch1-4:                   13464 (95% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Min       fault-base-1      912.00 (   0.00%)      905.00 (   0.77%)
Min       fault-huge-1      127.00 (   0.00%)      135.00 (  -6.30%)
Amean     fault-base-1     1467.55 (   0.00%)     1481.67 (  -0.96%)
Amean     fault-huge-1     1127.11 (   0.00%)     1063.88 *   5.61%*

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-1       77.64 (   0.00%)       83.46 (   7.49%)

As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.

2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  215698
4.20-rc3+patch:                     200210 (7% reduction)
4.20-rc3+patch1-4:                   14263 (93% reduction)

                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-5     1346.45 (   0.00%)     1306.87 (   2.94%)
Amean     fault-huge-5     3418.60 (   0.00%)     1348.94 (  60.54%)

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-5        0.78 (   0.00%)        7.91 ( 910.64%)

There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.

2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch:                    147463 (11% reduction)
4.20-rc3+patch1-4:                  11095 (93% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                 lowzone-v5r8             boost-v5r8
Amean     fault-base-5     6217.43 (   0.00%)     7419.67 * -19.34%*
Amean     fault-huge-5     3163.33 (   0.00%)     3263.80 (  -3.18%)

                              4.20.0-rc3             4.20.0-rc3
                            lowzone-v5r8             boost-v5r8
Percentage huge-5       95.14 (   0.00%)       87.98 (  -7.53%)

There is a large reduction in fragmentation events with some jitter around
the latencies and success rates.  As before, the high THP allocation
success rate does mean the system is under a lot of pressure.  However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.

Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Mel Gorman 0a79cdad5e mm: use alloc_flags to record if kswapd can wake
This is a preparation patch that copies the GFP flag __GFP_KSWAPD_RECLAIM
into alloc_flags.  This is a preparation patch only that avoids having to
pass gfp_mask through a long callchain in a future patch.

Note that the setting in the fast path happens in alloc_flags_nofragment()
and it may be claimed that this has nothing to do with ALLOC_NO_FRAGMENT.
That's true in this patch but is not true later so it's done now for
easier review to show where the flag needs to be recorded.

No functional change.

[mgorman@techsingularity.net: ALLOC_KSWAPD flag needs to be applied in the !CONFIG_ZONE_DMA32 case]
  Link: http://lkml.kernel.org/r/20181126143503.GO23260@techsingularity.net
Link: http://lkml.kernel.org/r/20181123114528.28802-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Mel Gorman a921444382 mm: move zone watermark accesses behind an accessor
This is a preparation patch only, no functional change.

Link: http://lkml.kernel.org/r/20181123114528.28802-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Mel Gorman 6bb154504f mm, page_alloc: spread allocations across zones before introducing fragmentation
Patch series "Fragmentation avoidance improvements", v5.

It has been noted before that fragmentation avoidance (aka
anti-fragmentation) is not perfect. Given sufficient time or an adverse
workload, memory gets fragmented and the long-term success of high-order
allocations degrades. This series defines an adverse workload, a definition
of external fragmentation events (including serious) ones and a series
that reduces the level of those fragmentation events.

The details of the workload and the consequences are described in more
detail in the changelogs. However, from patch 1, this is a high-level
summary of the adverse workload. The exact details are found in the
mmtests implementation.

The broad details of the workload are as follows;

1. Create an XFS filesystem (not specified in the configuration but done
   as part of the testing for this patch)
2. Start 4 fio threads that write a number of 64K files inefficiently.
   Inefficiently means that files are created on first access and not
   created in advance (fio parameterr create_on_open=1) and fallocate
   is not used (fallocate=none). With multiple IO issuers this creates
   a mix of slab and page cache allocations over time. The total size
   of the files is 150% physical memory so that the slabs and page cache
   pages get mixed
3. Warm up a number of fio read-only threads accessing the same files
   created in step 2. This part runs for the same length of time it
   took to create the files. It'll fault back in old data and further
   interleave slab and page cache allocations. As it's now low on
   memory due to step 2, fragmentation occurs as pageblocks get
   stolen.
4. While step 3 is still running, start a process that tries to allocate
   75% of memory as huge pages with a number of threads. The number of
   threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
   threads contending with fio, any other threads or forcing cross-NUMA
   scheduling. Note that the test has not been used on a machine with less
   than 8 cores. The benchmark records whether huge pages were allocated
   and what the fault latency was in microseconds
5. Measure the number of events potentially causing external fragmentation,
   the fault latency and the huge page allocation success rate.
6. Cleanup

Overall the series reduces external fragmentation causing events by over 94%
on 1 and 2 socket machines, which in turn impacts high-order allocation
success rates over the long term. There are differences in latencies and
high-order allocation success rates. Latencies are a mixed bag as they
are vulnerable to exact system state and whether allocations succeeded
so they are treated as a secondary metric.

Patch 1 uses lower zones if they are populated and have free memory
	instead of fragmenting a higher zone. It's special cased to
	handle a Normal->DMA32 fallback with the reasons explained
	in the changelog.

Patch 2-4 boosts watermarks temporarily when an external fragmentation
	event occurs. kswapd wakes to reclaim a small amount of old memory
	and then wakes kcompactd on completion to recover the system
	slightly. This introduces some overhead in the slowpath. The level
	of boosting can be tuned or disabled depending on the tolerance
	for fragmentation vs allocation latency.

Patch 5 stalls some movable allocation requests to let kswapd from patch 4
	make some progress. The duration of the stalls is very low but it
	is possible to tune the system to avoid fragmentation events if
	larger stalls can be tolerated.

The bulk of the improvement in fragmentation avoidance is from patches
1-4 but patch 5 can deal with a rare corner case and provides the option
of tuning a system for THP allocation success rates in exchange for
some stalls to control fragmentation.

This patch (of 5):

The page allocator zone lists are iterated based on the watermarks of each
zone which does not take anti-fragmentation into account.  On x86, node 0
may have multiple zones while other nodes have one zone.  A consequence is
that tasks running on node 0 may fragment ZONE_NORMAL even though
ZONE_DMA32 has plenty of free memory.  This patch special cases the
allocator fast path such that it'll try an allocation from a lower local
zone before fragmenting a higher zone.  In this case, stealing of
pageblocks or orders larger than a pageblock are still allowed in the fast
path as they are uninteresting from a fragmentation point of view.

This was evaluated using a benchmark designed to fragment memory before
attempting THP allocations.  It's implemented in mmtests as the following
configurations

configs/config-global-dhp__workload_thpfioscale
configs/config-global-dhp__workload_thpfioscale-defrag
configs/config-global-dhp__workload_thpfioscale-madvhugepage

e.g. from mmtests
./run-mmtests.sh --run-monitor --config configs/config-global-dhp__workload_thpfioscale test-run-1

The broad details of the workload are as follows;

1. Create an XFS filesystem (not specified in the configuration but done
   as part of the testing for this patch).
2. Start 4 fio threads that write a number of 64K files inefficiently.
   Inefficiently means that files are created on first access and not
   created in advance (fio parameter create_on_open=1) and fallocate
   is not used (fallocate=none). With multiple IO issuers this creates
   a mix of slab and page cache allocations over time. The total size
   of the files is 150% physical memory so that the slabs and page cache
   pages get mixed.
3. Warm up a number of fio read-only processes accessing the same files
   created in step 2. This part runs for the same length of time it
   took to create the files. It'll refault old data and further
   interleave slab and page cache allocations. As it's now low on
   memory due to step 2, fragmentation occurs as pageblocks get
   stolen.
4. While step 3 is still running, start a process that tries to allocate
   75% of memory as huge pages with a number of threads. The number of
   threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
   threads contending with fio, any other threads or forcing cross-NUMA
   scheduling. Note that the test has not been used on a machine with less
   than 8 cores. The benchmark records whether huge pages were allocated
   and what the fault latency was in microseconds.
5. Measure the number of events potentially causing external fragmentation,
   the fault latency and the huge page allocation success rate.
6. Cleanup the test files.

Note that due to the use of IO and page cache that this benchmark is not
suitable for running on large machines where the time to fragment memory
may be excessive.  Also note that while this is one mix that generates
fragmentation that it's not the only mix that generates fragmentation.
Differences in workload that are more slab-intensive or whether SLUB is
used with high-order pages may yield different results.

When the page allocator fragments memory, it records the event using the
mm_page_alloc_extfrag ftrace event.  If the fallback_order is smaller than
a pageblock order (order-9 on 64-bit x86) then it's considered to be an
"external fragmentation event" that may cause issues in the future.
Hence, the primary metric here is the number of external fragmentation
events that occur with order < 9.  The secondary metric is allocation
latency and huge page allocation success rates but note that differences
in latencies and what the success rate also can affect the number of
external fragmentation event which is why it's a secondary metric.

1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------

4.20-rc3 extfrag events < order 9:   804694
4.20-rc3+patch:                      408912 (49% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                      vanilla           lowzone-v5r8
Amean     fault-base-1      662.92 (   0.00%)      653.58 *   1.41%*
Amean     fault-huge-1        0.00 (   0.00%)        0.00 (   0.00%)

                              4.20.0-rc3             4.20.0-rc3
                                 vanilla           lowzone-v5r8
Percentage huge-1        0.00 (   0.00%)        0.00 (   0.00%)

Fault latencies are slightly reduced while allocation success rates remain
at zero as this configuration does not make any special effort to allocate
THP and fio is heavily active at the time and either filling memory or
keeping pages resident.  However, a 49% reduction of serious fragmentation
events reduces the changes of external fragmentation being a problem in
the future.

Vlastimil asked during review for a breakdown of the allocation types
that are falling back.

vanilla
   3816 MIGRATE_UNMOVABLE
 800845 MIGRATE_MOVABLE
     33 MIGRATE_UNRECLAIMABLE

patch
    735 MIGRATE_UNMOVABLE
 408135 MIGRATE_MOVABLE
     42 MIGRATE_UNRECLAIMABLE

The majority of the fallbacks are due to movable allocations and this is
consistent for the workload throughout the series so will not be presented
again as the primary source of fallbacks are movable allocations.

Movable fallbacks are sometimes considered "ok" to fallback because they
can be migrated.  The problem is that they can fill an
unmovable/reclaimable pageblock causing those allocations to fallback
later and polluting pageblocks with pages that cannot move.  If there is a
movable fallback, it is pretty much guaranteed to affect an
unmovable/reclaimable pageblock and while it might not be enough to
actually cause a unmovable/reclaimable fallback in the future, we cannot
know that in advance so the patch takes the only option available to it.
Hence, it's important to control them.  This point is also consistent
throughout the series and will not be repeated.

1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  291392
4.20-rc3+patch:                     191187 (34% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                      vanilla           lowzone-v5r8
Amean     fault-base-1     1495.14 (   0.00%)     1467.55 (   1.85%)
Amean     fault-huge-1     1098.48 (   0.00%)     1127.11 (  -2.61%)

thpfioscale Percentage Faults Huge
                              4.20.0-rc3             4.20.0-rc3
                                 vanilla           lowzone-v5r8
Percentage huge-1       78.57 (   0.00%)       77.64 (  -1.18%)

Fragmentation events were reduced quite a bit although this is known
to be a little variable. The latencies and allocation success rates
are similar but they were already quite high.

2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------

4.20-rc3 extfrag events < order 9:  215698
4.20-rc3+patch:                     200210 (7% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                      vanilla           lowzone-v5r8
Amean     fault-base-5     1350.05 (   0.00%)     1346.45 (   0.27%)
Amean     fault-huge-5     4181.01 (   0.00%)     3418.60 (  18.24%)

                              4.20.0-rc3             4.20.0-rc3
                                 vanilla           lowzone-v5r8
Percentage huge-5        1.15 (   0.00%)        0.78 ( -31.88%)

The reduction of external fragmentation events is slight and this is
partially due to the removal of __GFP_THISNODE in commit ac5b2c1891
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings") as THP
allocations can now spill over to remote nodes instead of fragmenting
local memory.

2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------

4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch:                    147463 (11% reduction)

thpfioscale Fault Latencies
                                   4.20.0-rc3             4.20.0-rc3
                                      vanilla           lowzone-v5r8
Amean     fault-base-5     6138.97 (   0.00%)     6217.43 (  -1.28%)
Amean     fault-huge-5     2294.28 (   0.00%)     3163.33 * -37.88%*

thpfioscale Percentage Faults Huge
                              4.20.0-rc3             4.20.0-rc3
                                 vanilla           lowzone-v5r8
Percentage huge-5       96.82 (   0.00%)       95.14 (  -1.74%)

There was a slight reduction in external fragmentation events although the
latencies were higher.  The allocation success rate is high enough that
the system is struggling and there is quite a lot of parallel reclaim and
compaction activity.  There is also a certain degree of luck on whether
processes start on node 0 or not for this patch but the relevance is
reduced later in the series.

Overall, the patch reduces the number of external fragmentation causing
events so the success of THP over long periods of time would be improved
for this adverse workload.

Link: http://lkml.kernel.org/r/20181123114528.28802-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Aaron Lu 742aa7fb52 mm/page_alloc.c: use a single function to free page
There are multiple places of freeing a page, they all do the same things
so a common function can be used to reduce code duplicate.

It also avoids bug fixed in one function but left in another.

Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Pawel Staszewski <pstaszewski@itcare.pl>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Aaron Lu 65895b67ad mm/page_alloc.c: free order-0 pages through PCP in page_frag_free()
page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.

Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:

  mlx5e_poll_tx_cq
  |
   --16.34%--napi_consume_skb
             |
             |--12.65%--__free_pages_ok
             |          |
             |           --11.86%--free_one_page
             |                     |
             |                     |--10.10%--queued_spin_lock_slowpath
             |                     |
             |                      --0.65%--_raw_spin_lock
             |
             |--1.55%--page_frag_free
             |
              --1.44%--skb_release_data

Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator.  The lock contention happens during mlx5 DMA TX completion
cycle.  And the page allocator cannot keep up at these speeds.[2]

I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]

The free path as pointed out by Jesper is:
skb_free_head()
  -> skb_free_frag()
    -> page_frag_free()
And the pages being freed on this path are order-0 pages.

Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.

With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone.  Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.

[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: Pawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:48 -08:00
Huang Shijie 7ead334215 mm/page_alloc.c: change the order of MIGRATE_RECLAIMABLE/MIGRATE_MOVABLE in fallbacks
In the enum migratetype definition, MIGRATE_MOVABLE is before
MIGRATE_RECLAIMABLE.  Change the order of them to match the enumeration's
order.

Link: http://lkml.kernel.org/r/20181121085821.3442-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Arun KS 476567e873 mm: remove managed_page_count_lock spinlock
Now that totalram_pages and managed_pages are atomic varibles, no need of
managed_page_count spinlock.  The lock had really a weak consistency
guarantee.  It hasn't been used for anything but the update but no reader
actually cares about all the values being updated to be in sync.

Link: http://lkml.kernel.org/r/1542090790-21750-5-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Arun KS ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Arun KS 9705bea5f8 mm: convert zone->managed_pages to atomic variable
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.

This patch converts zone->managed_pages.  Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Arun KS 3d6357de8a mm: reference totalram_pages and managed_pages once per function
Patch series "mm: convert totalram_pages, totalhigh_pages and managed
pages to atomic", v5.

This series converts totalram_pages, totalhigh_pages and
zone->managed_pages to atomic variables.

totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better
to remove the lock and convert variables to atomic.  With the change,
preventing poteintial store-to-read tearing comes as a bonus.

This patch (of 4):

This is in preparation to a later patch which converts totalram_pages and
zone->managed_pages to atomic variables.  Please note that re-reading the
value might lead to a different value and as such it could lead to
unexpected behavior.  There are no known bugs as a result of the current
code but it is better to prevent from them in principle.

Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Wei Yang fecd4a50ba mm: remove reset of pcp->counter in pageset_init()
per_cpu_pageset is cleared by memset, it is not necessary to reset it
again.

Link: http://lkml.kernel.org/r/20181021023920.5501-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Michal Hocko d381c54760 mm: only report isolation failures when offlining memory
Heiko has complained that his log is swamped by warnings from
has_unmovable_pages

[   20.536664] page dumped because: has_unmovable_pages
[   20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0
[   20.536794] flags: 0x3fffe0000010200(slab|head)
[   20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600
[   20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
[   20.536797] page dumped because: has_unmovable_pages
[   20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0
[   20.536815] flags: 0x7fffe0000000000()
[   20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000
[   20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000

which are not triggered by the memory hotplug but rather CMA allocator.
The original idea behind dumping the page state for all call paths was
that these messages will be helpful debugging failures.  From the above it
seems that this is not the case for the CMA path because we are lacking
much more context.  E.g the second reported page might be a CMA allocated
page.  It is still interesting to see a slab page in the CMA area but it
is hard to tell whether this is bug from the above output alone.

Address this issue by dumping the page state only on request.  Both
start_isolate_page_range and has_unmovable_pages already have an argument
to ignore hwpoison pages so make this argument more generic and turn it
into flags and allow callers to combine non-default modes into a mask.
While we are at it, has_unmovable_pages call from
is_pageblock_removable_nolock (sysfs removable file) is questionable to
report the failure so drop it from there as well.

Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:46 -08:00
Michal Hocko 2932c8b050 mm, memory_hotplug: be more verbose for memory offline failures
There is only very limited information printed when the memory offlining
fails:

[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff

This tells us that the failure is triggered by the userspace intervention
but it doesn't tell us much more about the underlying reason.  It might be
that the page migration failes repeatedly and the userspace timeout
expires and send a signal or it might be some of the earlier steps
(isolation, memory notifier) takes too long.

If the migration failes then it would be really helpful to see which page
that and its state.  The same applies to the isolation phase.  If we fail
to isolate a page from the allocator then knowing the state of the page
would be helpful as well.

Dump the page state that fails to get isolated or migrated.  This will
tell us more about the failure and what to focus on during debugging.

[akpm@linux-foundation.org: add missing printk arg]
[mhocko@suse.com: tweak dump_page() `reason' text]
  Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org
Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:46 -08:00
Andrey Konovalov 2813b9c029 kasan, mm, arm64: tag non slab memory allocated via pagealloc
Tag-based KASAN doesn't check memory accesses through pointers tagged with
0xff.  When page_address is used to get pointer to memory that corresponds
to some page, the tag of the resulting pointer gets set to 0xff, even
though the allocated memory might have been tagged differently.

For slab pages it's impossible to recover the correct tag to return from
page_address, since the page might contain multiple slab objects tagged
with different values, and we can't know in advance which one of them is
going to get accessed.  For non slab pages however, we can recover the tag
in page_address, since the whole page was marked with the same tag.

This patch adds tagging to non slab memory allocated with pagealloc.  To
set the tag of the pointer returned from page_address, the tag gets stored
to page->flags when the memory gets allocated.

Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:44 -08:00
Oscar Salvador 17e2e7d7e1 mm, page_alloc: fix has_unmovable_pages for HugePages
While playing with gigantic hugepages and memory_hotplug, I triggered
the following #PF when "cat memoryX/removable":

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1481 Comm: cat Tainted: G            E     4.20.0-rc6-mm1-1-default+ #18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:has_unmovable_pages+0x154/0x210
  Call Trace:
   is_mem_section_removable+0x7d/0x100
   removable_show+0x90/0xb0
   dev_attr_show+0x1c/0x50
   sysfs_kf_seq_show+0xca/0x1b0
   seq_read+0x133/0x380
   __vfs_read+0x26/0x180
   vfs_read+0x89/0x140
   ksys_read+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is we do not pass the Head to page_hstate(), and so, the call
to compound_order() in page_hstate() returns 0, so we end up checking
all hstates's size to match PAGE_SIZE.

Obviously, we do not find any hstate matching that size, and we return
NULL.  Then, we dereference that NULL pointer in
hugepage_migration_supported() and we got the #PF from above.

Fix that by getting the head page before calling page_hstate().

Also, since gigantic pages span several pageblocks, re-adjust the logic
for skipping pages.  While are it, we can also get rid of the
round_up().

[osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal]
  Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de
Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-21 14:51:18 -08:00
Mikhail Zaslonko 2830bf6f05 mm, memory_hotplug: initialize struct pages for the full memory section
If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct page access from
is_mem_section_removable() or test_pages_in_a_zone() function triggered
by memory_hotplug sysfs handlers:

Here are the the panic examples:
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_VM_PGFLAGS=y

 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( test_pages_in_a_zone+0xde/0x160)
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

 kernel parameter mem=3075M
 --------------------------
 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( is_mem_section_removable+0xb4/0x190)
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix the problem by initializing the last memory section of each zone in
memmap_init_zone() till the very end, even if it goes beyond the zone end.

Michal said:

: This has alwways been problem AFAIU.  It just went unnoticed because we
: have zeroed memmaps during allocation before f7f99100d8 ("mm: stop
: zeroing memory during allocation in vmemmap") and so the above test
: would simply skip these ranges as belonging to zone 0 or provided a
: garbage.
:
: So I guess we do care for post f7f99100d8 kernels mostly and
: therefore Fixes: f7f99100d8 ("mm: stop zeroing memory during
: allocation in vmemmap")

Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com
Fixes: f7f99100d8 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-21 14:51:18 -08:00
Wei Yang 8f416836c0 mm/page_alloc.c: fix calculation of pgdat->nr_zones
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally.  This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

  * free_area_init_core()
  * move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically.  While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

   -m 4G,slots=32,maxmem=32G \
   -smp 4,maxcpus=8          \
   -numa node,nodeid=0,mem=4G,cpus=0-3 \
   -numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

   cpu-add [3-7]

2. hot-add memory to nod1

   object_add memory-backend-ram,id=ram0,size=1G
   device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

   echo online_movable > memory47/state
   echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
 "Having an incorrect nr_zones might result in all sorts of problems
  which would be quite hard to debug (e.g. reclaim not considering the
  movable zone). I do not expect many users would suffer from this it
  but still this is trivial and obviously right thing to do so
  backporting to the stable tree shouldn't be harmful (last famous
  words)"

Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30 14:56:14 -08:00
Michal Hocko c63ae43ba5 mm, page_alloc: check for max order in hot path
Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18 10:15:10 -08:00
Michal Hocko 9d7899999c mm, memory_hotplug: check zone_movable in has_unmovable_pages
Page state checks are racy.  Under a heavy memory workload (e.g.  stress
-m 200 -t 2h) it is quite easy to hit a race window when the page is
allocated but its state is not fully populated yet.  A debugging patch to
dump the struct page state shows

  has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0
  page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1
  flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked)

Note that the state has been checked for both PageLRU and PageSwapBacked
already.  Closing this race completely would require some sort of retry
logic.  This can be tricky and error prone (think of potential endless
or long taking loops).

Workaround this problem for movable zones at least.  Such a zone should
only contain movable pages.  Commit 15c30bc090 ("mm, memory_hotplug:
make has_unmovable_pages more robust") has told us that this is not
strictly true though.  Bootmem pages should be marked reserved though so
we can move the original check after the PageReserved check.  Pages from
other zones are still prone to races but we even do not pretend that
memory hotremove works for those so pre-mature failure doesn't hurt that
much.

Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org
Fixes: 15c30bc090 ("mm, memory_hotplug: make has_unmovable_pages more robust")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-18 10:15:09 -08:00
Mike Rapoport 7e1c4e2792 memblock: stop using implicit alignment to SMP_CACHE_BYTES
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.

Implicit alignment is done deep in the memblock allocator and it can
come as a surprise.  Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.

Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.

For the case when memblock APIs are used via helper functions, e.g.  like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.

The direct memblock APIs users were updated using the semantic patch below:

@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)

[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
  Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com>	[MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport 7c2ee349cf memblock: rename __free_pages_bootmem to memblock_free_pages
The conversion is done using

sed -i 's@__free_pages_bootmem@memblock_free_pages@' \
    $(git grep -l __free_pages_bootmem)

Link: http://lkml.kernel.org/r/1536927045-23536-27-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport c6ffc5ca8f memblock: rename free_all_bootmem to memblock_free_all
The conversion is done using

sed -i 's@free_all_bootmem@memblock_free_all@' \
    $(git grep -l free_all_bootmem)

Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport eb31d559f1 memblock: remove _virt from APIs returning virtual address
The conversion is done using

sed -i 's@memblock_virt_alloc@memblock_alloc@g' \
	$(git grep -l memblock_virt_alloc)

Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:15 -07:00
Mike Rapoport aca52c3983 mm: remove CONFIG_HAVE_MEMBLOCK
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.

[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
  Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
  Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
  Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:15 -07:00
Pavel Tatashin ec393a0f01 mm: return zero_resv_unavail optimization
When checking for valid pfns in zero_resv_unavail(), it is not necessary
to verify that pfns within pageblock_nr_pages ranges are valid, only the
first one needs to be checked.  This is because memory for pages are
allocated in contiguous chunks that contain pageblock_nr_pages struct
pages.

Link: http://lkml.kernel.org/r/20181002143821.5112-3-msys.mizuma@gmail.com
Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:38:15 -07:00
Naoya Horiguchi 907ec5fca3 mm: zero remaining unavailable struct pages
Patch series "mm: Fix for movable_node boot option", v3.

This patch series contains a fix for the movable_node boot option issue
which was introduced by commit 124049decb ("x86/e820: put !E820_TYPE_RAM
regions into memblock.reserved").

The commit breaks the option because it changed the memory gap range to
reserved memblock.  So, the node is marked as Normal zone even if the SRAT
has Hot pluggable affinity.

First and second patch fix the original issue which the commit tried to
fix, then revert the commit.

This patch (of 3):

There is a kernel panic that is triggered when reading /proc/kpageflags on
the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]':

  BUG: unable to handle kernel paging request at fffffffffffffffe
  PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0
  Oops: 0000 [#1] SMP PTI
  CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
  RIP: 0010:stable_page_flags+0x27/0x3c0
  Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7
  RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0
  RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001
  R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0
  R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10
  FS:  00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0
  Call Trace:
   kpageflags_read+0xc7/0x120
   proc_reg_read+0x3c/0x60
   __vfs_read+0x36/0x170
   vfs_read+0x89/0x130
   ksys_pread64+0x71/0x90
   do_syscall_64+0x5b/0x160
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7efc42e75e23
  Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24

According to kernel bisection, this problem became visible due to commit
f7f99100d8 which changes how struct pages are initialized.

Memblock layout affects the pfn ranges covered by node/zone.  Consider
that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the
default (no memmap= given) memblock layout is like below:

  MEMBLOCK configuration:
   memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x4
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
   memory[0x3]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

If you give memmap=1G!4G (so it just covers memory[0x2]),
the range [0x100000000-0x13fffffff] is gone:

  MEMBLOCK configuration:
   memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x3
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

This causes shrinking node 0's pfn range because it is calculated by the
address range of memblock.memory.  So some of struct pages in the gap
range are left uninitialized.

We have a function zero_resv_unavail() which does zeroing the struct pages
outside memblock.memory, but currently it covers only the reserved
unavailable range (i.e.  memblock.memory && !memblock.reserved).  This
patch extends it to cover all unavailable range, which fixes the reported
issue.

Link: http://lkml.kernel.org/r/20181002143821.5112-2-msys.mizuma@gmail.com
Fixes: f7f99100d8 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:38:15 -07:00
Pavel Tatashin a9a9e77fbf mm: move mirrored memory specific code outside of memmap_init_zone
memmap_init_zone, is getting complex, because it is called from different
contexts: hotplug, and during boot, and also because it must handle some
architecture quirks.  One of them is mirrored memory.

Move the code that decides whether to skip mirrored memory outside of
memmap_init_zone, into a separate function.

[pasha.tatashin@oracle.com: uninline overlap_memmap_init()]
  Link: http://lkml.kernel.org/r/20180726193509.3326-4-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180724235520.10200-4-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:38:10 -07:00
Pavel Tatashin d3035be4ce mm: calculate deferred pages after skipping mirrored memory
update_defer_init() should be called only when struct page is about to be
initialized. Because it counts number of initialized struct pages, but
there we may skip struct pages if there is some mirrored memory.

So move, update_defer_init() after checking for mirrored memory.

Also, rename update_defer_init() to defer_init() and reverse the return
boolean to emphasize that this is a boolean function, that tells that the
reset of memmap initialization should be deferred.

Make this function self-contained: do not pass number of already
initialized pages in this zone by using static counters.

I found this bug by reading the code.  The effect is that fewer than
expected struct pages are initialized early in boot, and it is possible
that in some corner cases we may fail to boot when mirrored pages are
used.  The deferred on demand code should somewhat mitigate this.  But
this still brings some inconsistencies compared to when booting without
mirrored pages, so it is better to fix.

[pasha.tatashin@oracle.com: add comment about defer_init's lack of locking]
  Link: http://lkml.kernel.org/r/20180726193509.3326-3-pasha.tatashin@oracle.com
[akpm@linux-foundation.org: make defer_init non-inline, __meminit]
Link: http://lkml.kernel.org/r/20180724235520.10200-3-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:35 -07:00
Pavel Tatashin dfb3ccd00a mm: make memmap_init a proper function
memmap_init is sometimes a macro sometimes a function based on
__HAVE_ARCH_MEMMAP_INIT.  It is only a function on ia64.  Make memmap_init
a weak function instead, and let ia64 redefine it.

Link: http://lkml.kernel.org/r/20180724235520.10200-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:35 -07:00
David Rientjes 4a222127f3 mm/page_alloc.c: initialize num_movable in move_freepages()
If move_freepages_block() returns 0 because !zone_spans_pfn(),
*num_movable can hold the value from the stack because it does not get
initialized in move_freepages().

Move the initialization to move_freepages_block() to guarantee the value
actually makes sense.

This currently doesn't affect its only caller where num_movable != NULL,
so no bug fix, but just more robust.

Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1810051355490.212229@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:35 -07:00
Alexander Duyck 966cf44f63 mm: defer ZONE_DEVICE page initialization to the point where we init pgmap
The ZONE_DEVICE pages were being initialized in two locations.  One was
with the memory_hotplug lock held and another was outside of that lock.
The problem with this is that it was nearly doubling the memory
initialization time.  Instead of doing this twice, once while holding a
global lock and once without, I am opting to defer the initialization to
the one outside of the lock.  This allows us to avoid serializing the
overhead for memory init and we can instead focus on per-node init times.

One issue I encountered is that devm_memremap_pages and
hmm_devmmem_pages_create were initializing only the pgmap field the same
way.  One wasn't initializing hmm_data, and the other was initializing it
to a poison value.  Since this is something that is exposed to the driver
in the case of hmm I am opting for a third option and just initializing
hmm_data to 0 since this is going to be exposed to unknown third party
drivers.

[alexander.h.duyck@linux.intel.com: fix reference count for pgmap in devm_memremap_pages]
  Link: http://lkml.kernel.org/r/20181008233404.1909.37302.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/20180925202053.3576.66039.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:34 -07:00
Alexander Duyck d483da5bc7 mm: create non-atomic version of SetPageReserved for init use
It doesn't make much sense to use the atomic SetPageReserved at init time
when we are using memset to clear the memory and manipulating the page
flags via simple "&=" and "|=" operations in __init_single_page.

This patch adds a non-atomic version __SetPageReserved that can be used
during page init and shows about a 10% improvement in initialization times
on the systems I have available for testing.  On those systems I saw
initialization times drop from around 35 seconds to around 32 seconds to
initialize a 3TB block of persistent memory.  I believe the main advantage
of this is that it allows for more compiler optimization as the __set_bit
operation can be reordered whereas the atomic version cannot.

I tried adding a bit of documentation based on f1dd2cd13c ("mm,
memory_hotplug: do not associate hotadded memory to zones until online").

Ideally the reserved flag should be set earlier since there is a brief
window where the page is initialization via __init_single_page and we have
not set the PG_Reserved flag.  I'm leaving that for a future patch set as
that will require a more significant refactor.

Link: http://lkml.kernel.org/r/20180925202018.3576.11607.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:34 -07:00
Michal Hocko 2c029a1ea3 mm, page_alloc: drop should_suppress_show_mem
should_suppress_show_mem() was introduced to reduce the overhead of
show_mem on large NUMA systems.  Things have changed since then though.
Namely c78e93630d ("mm: do not walk all of system memory during
show_mem") has reduced the overhead considerably.

Moreover warn_alloc_show_mem clears SHOW_MEM_FILTER_NODES when called from
the IRQ context already so we are not printing per node stats.

Remove should_suppress_show_mem because we are losing potentially
interesting information about allocation failures.  We have seen a bug
report where system gets unresponsive under memory pressure and there is
only

kernel: [2032243.696888] qlge 0000:8b:00.1 ql1: Could not get a page chunk, i=8, clean_idx =200 .
kernel: [2032243.710725] swapper/7: page allocation failure: order:1, mode:0x1084120(GFP_ATOMIC|__GFP_COLD|__GFP_COMP)

without an additional information for debugging.  It would be great to see
the state of the page allocator at the moment.

Link: http://lkml.kernel.org/r/20180907114334.7088-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:33 -07:00
Johannes Weiner eb414681d5 psi: pressure stall information for CPU, memory, and IO
When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills.  In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.

In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.

A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively.  Stall states are aggregate versions of the per-task delay
accounting delays:

       cpu: some tasks are runnable but not executing on a CPU
       memory: tasks are reclaiming, or waiting for swapin or thrashing cache
       io: tasks are waiting for io completions

These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit.  They can also indicate when the system
is approaching lockup scenarios and OOMs.

To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states.  Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime.  A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).

[hannes@cmpxchg.org: doc fixlet, per Randy]
  Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
  Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
  Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
  Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Vlastimil Babka b29940c1ab mm: rename and change semantics of nr_indirectly_reclaimable_bytes
The vmstat counter NR_INDIRECTLY_RECLAIMABLE_BYTES was introduced by
commit eb59254608 ("mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES") with
the goal of accounting objects that can be reclaimed, but cannot be
allocated via a SLAB_RECLAIM_ACCOUNT cache.  This is now possible via
kmalloc() with __GFP_RECLAIMABLE flag, and the dcache external names user
is converted.

The counter is however still useful for accounting direct page allocations
(i.e.  not slab) with a shrinker, such as the ION page pool.  So keep it,
and:

- change granularity to pages to be more like other counters; sub-page
  allocations should be able to use kmalloc
- rename the counter to NR_KERNEL_MISC_RECLAIMABLE
- expose the counter again in vmstat as "nr_kernel_misc_reclaimable"; we can
  again remove the check for not printing "hidden" counters

Link: http://lkml.kernel.org/r/20180731090649.16028-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Oscar Salvador 7b0e0c0e35 mm/page_alloc.c: clean up check_for_memory()
check_for_memory() looks a bit confusing.  First of all, we have this:

if (N_MEMORY == N_NORMAL_MEMORY)
	return;

Checking the ENUM declaration, looks like N_MEMORY canot be equal to
N_NORMAL_MEMORY.

I could not find where N_MEMORY is set to N_NORMAL_MEMORY, or the other
way around either, so unless I am missing something, this condition will
never evaluate to true.  It makes sense to get rid of it.

Moving forward, the operations within the loop look a bit confusing as
well.

We set N_HIGH_MEMORY unconditionally, and then we set N_NORMAL_MEMORY in
case we have CONFIG_HIGHMEM (N_NORMAL_MEMORY != N_HIGH_MEMORY) and zone <=
ZONE_NORMAL.  (N_HIGH_MEMORY falls back to N_NORMAL_MEMORY on
!CONFIG_HIGHMEM systems, and that is why we can just go ahead and set
N_HIGH_MEMORY unconditionally)

Although this works, it is a bit subtle.

I think that this could be easier to follow:

First, we should only set N_HIGH_MEMORY in case we have CONFIG_HIGHMEM.
And then we should set N_NORMAL_MEMORY in case zone <= ZONE_NORMAL,
without further checking whether we have CONFIG_HIGHMEM or not.

Link: http://lkml.kernel.org/r/20180828210158.4617-1-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michael Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:25:19 -07:00
Michal Hocko 15f570bf3d mm,page_alloc: PF_WQ_WORKER threads must sleep at should_reclaim_retry()
Tetsuo Handa has reported that it is possible to bypass the short sleep
for PF_WQ_WORKER threads which was introduced by commit 373ccbe592
("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make
any progress") and lock up the system if OOM.

The primary reason is that WQ_MEM_RECLAIM WQs are not guaranteed to run
even when they have a rescuer available.  Those workers might be essential
for reclaim to make a forward progress, however.  If we are too unlucky
all the allocations requests can get stuck waiting for a WQ_MEM_RECLAIM
work item and the system is essentially stuck in an OOM condition without
much hope to move on.  Tetsuo has seen the reclaim stuck on
drain_local_pages_wq or xlog_cil_push_work (xfs).  There might be others.

Since should_reclaim_retry() should be a natural reschedule point,
let's do the short sleep for PF_WQ_WORKER threads unconditionally in
order to guarantee that other pending work items are started.  This
will workaround this problem and it is less fragile than hunting down
when the sleep is missed.  Having a single sleeping point is more
robust.

[akpm@linux-foundation.org: reflow comment to 80 cols to save a couple of lines]
Link: http://lkml.kernel.org/r/20180827135101.15700-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:25:19 -07:00
Srikar Dronamraju e054637597 mm, sched/numa: Remove remaining traces of NUMA rate-limiting
Remove the leftover pglist_data::numabalancing_migrate_lock and its
initialization, we stopped using this lock with:

  efaffc5e40 ("mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration")

[ mingo: Rewrote the changelog. ]

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1538824999-31230-1-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 08:30:51 +02:00
Mel Gorman efaffc5e40 mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration
Rate limiting of page migrations due to automatic NUMA balancing was
introduced to mitigate the worst-case scenario of migrating at high
frequency due to false sharing or slowly ping-ponging between nodes.
Since then, a lot of effort was spent on correctly identifying these
pages and avoiding unnecessary migrations and the safety net may no longer
be required.

Jirka Hladky reported a regression in 4.17 due to a scheduler patch that
avoids spreading STREAM tasks wide prematurely. However, once the task
was properly placed, it delayed migrating the memory due to rate limiting.
Increasing the limit fixed the problem for him.

Currently, the limit is hard-coded and does not account for the real
capabilities of the hardware. Even if an estimate was attempted, it would
not properly account for the number of memory controllers and it could
not account for the amount of bandwidth used for normal accesses. Rather
than fudging, this patch simply eliminates the rate limiting.

However, Jirka reports that a STREAM configuration using multiple
processes achieved similar performance to 4.16. In local tests, this patch
improved performance of STREAM relative to the baseline but it is somewhat
machine-dependent. Most workloads show little or not performance difference
implying that there is not a heavily reliance on the throttling mechanism
and it is safe to remove.

STREAM on 2-socket machine
                         4.19.0-rc5             4.19.0-rc5
                         numab-v1r1       noratelimit-v1r1
MB/sec copy     43298.52 (   0.00%)    44673.38 (   3.18%)
MB/sec scale    30115.06 (   0.00%)    31293.06 (   3.91%)
MB/sec add      32825.12 (   0.00%)    34883.62 (   6.27%)
MB/sec triad    32549.52 (   0.00%)    34906.60 (   7.24%

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-2-mgorman@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-02 11:31:14 +02:00
Aneesh Kumar K.V 464c7ffbcb mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
When scanning for movable pages, filter out Hugetlb pages if hugepage
migration is not supported.  Without this we hit infinte loop in
__offline_pages() where we do

	pfn = scan_movable_pages(start_pfn, end_pfn);
	if (pfn) { /* We have movable pages */
		ret = do_migrate_range(pfn, end_pfn);
		goto repeat;
	}

Fix this by checking hugepage_migration_supported both in
has_unmovable_pages which is the primary backoff mechanism for page
offlining and for consistency reasons also into scan_movable_pages
because it doesn't make any sense to return a pfn to non-migrateable
huge page.

This issue was revealed by, but not caused by 72b39cfc4d ("mm,
memory_hotplug: do not fail offlining too early").

Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com
Fixes: 72b39cfc4d ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Haren Myneni <haren@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-04 16:45:02 -07:00
Mukesh Ojha 13ba17bee1 notifier: Remove notifier header file wherever not used
The conversion of the hotplug notifiers to a state machine left the
notifier.h includes around in some places. Remove them.

Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1535114033-4605-1-git-send-email-mojha@codeaurora.org
2018-08-30 12:56:40 +02:00
Naoya Horiguchi d4ae9916ea mm: soft-offline: close the race against page allocation
A process can be killed with SIGBUS(BUS_MCEERR_AR) when it tries to
allocate a page that was just freed on the way of soft-offline.  This is
undesirable because soft-offline (which is about corrected error) is
less aggressive than hard-offline (which is about uncorrected error),
and we can make soft-offline fail and keep using the page for good
reason like "system is busy."

Two main changes of this patch are:

- setting migrate type of the target page to MIGRATE_ISOLATE. As done
  in free_unref_page_commit(), this makes kernel bypass pcplist when
  freeing the page. So we can assume that the page is in freelist just
  after put_page() returns,

- setting PG_hwpoison on free page under zone->lock which protects
  freelists, so this allows us to avoid setting PG_hwpoison on a page
  that is decided to be allocated soon.

[akpm@linux-foundation.org: tweak set_hwpoison_free_buddy_page() comment]
Link: http://lkml.kernel.org/r/1531452366-11661-3-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zy.zhengyi@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23 18:48:43 -07:00
Oscar Salvador 03e85f9d5f mm/page_alloc: Introduce free_area_init_core_hotplug
Currently, whenever a new node is created/re-used from the memhotplug
path, we call free_area_init_node()->free_area_init_core().  But there is
some code that we do not really need to run when we are coming from such
path.

free_area_init_core() performs the following actions:

1) Initializes pgdat internals, such as spinlock, waitqueues and more.
2) Account # nr_all_pages and # nr_kernel_pages. These values are used later on
   when creating hash tables.
3) Account number of managed_pages per zone, substracting dma_reserved and
   memmap pages.
4) Initializes some fields of the zone structure data
5) Calls init_currently_empty_zone to initialize all the freelists
6) Calls memmap_init to initialize all pages belonging to certain zone

When called from memhotplug path, free_area_init_core() only performs
actions #1 and #4.

Action #2 is pointless as the zones do not have any pages since either the
node was freed, or we are re-using it, eitherway all zones belonging to
this node should have 0 pages.  For the same reason, action #3 results
always in manages_pages being 0.

Action #5 and #6 are performed later on when onlining the pages:
 online_pages()->move_pfn_range_to_zone()->init_currently_empty_zone()
 online_pages()->move_pfn_range_to_zone()->memmap_init_zone()

This patch does two things:

First, moves the node/zone initializtion to their own function, so it
allows us to create a small version of free_area_init_core, where we only
perform:

1) Initialization of pgdat internals, such as spinlock, waitqueues and more
4) Initialization of some fields of the zone structure data

These two functions are: pgdat_init_internals() and zone_init_internals().

The second thing this patch does, is to introduce
free_area_init_core_hotplug(), the memhotplug version of
free_area_init_core():

Currently, we call free_area_init_node() from the memhotplug path.  In
there, we set some pgdat's fields, and call calculate_node_totalpages().
calculate_node_totalpages() calculates the # of pages the node has.

Since the node is either new, or we are re-using it, the zones belonging
to this node should not have any pages, so there is no point to calculate
this now.

Actually, we re-set these values to 0 later on with the calls to:

reset_node_managed_pages()
reset_node_present_pages()

The # of pages per node and the # of pages per zone will be calculated when
onlining the pages:

online_pages()->move_pfn_range()->move_pfn_range_to_zone()->resize_zone_range()
online_pages()->move_pfn_range()->move_pfn_range_to_zone()->resize_pgdat_range()

Also, since free_area_init_core/free_area_init_node will now only get called during early init, let us replace
__paginginit with __init, so their code gets freed up.

[osalvador@techadventures.net: fix section usage]
  Link: http://lkml.kernel.org/r/20180731101752.GA473@techadventures.net
[osalvador@suse.de: v6]
  Link: http://lkml.kernel.org/r/20180801122348.21588-6-osalvador@techadventures.net
Link: http://lkml.kernel.org/r/20180730101757.28058-5-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Oscar Salvador 0188dc98ad mm/page_alloc: inline function to handle CONFIG_DEFERRED_STRUCT_PAGE_INIT
Let us move the code between CONFIG_DEFERRED_STRUCT_PAGE_INIT to an inline
function.  Not having an ifdef in the function makes the code more
readable.

Link: http://lkml.kernel.org/r/20180730101757.28058-4-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Pavel Tatashin 7cc2a9596d mm: remove __paginginit
__paginginit is the same thing as __meminit except for platforms without
sparsemem, there it is defined as __init.

Remove __paginginit and use __meminit.  Use __ref in one single function
that merges __meminit and __init sections: setup_usemap().

Link: http://lkml.kernel.org/r/20180801122348.21588-4-osalvador@techadventures.net
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Pavel Tatashin c1093b746c mm: access zone->node via zone_to_nid() and zone_set_nid()
zone->node is configured only when CONFIG_NUMA=y, so it is a good idea to
have inline functions to access this field in order to avoid ifdef's in c
files.

Link: http://lkml.kernel.org/r/20180730101757.28058-3-osalvador@techadventures.net
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Oscar Salvador ace1db3976 mm/page_alloc.c: move ifdefery out of free_area_init_core
Patch series "Refactor free_area_init_core and add
free_area_init_core_hotplug", v6.

This patchset does three things:

 1) Clean up/refactor free_area_init_core/free_area_init_node
    by moving the ifdefery out of the functions.
 2) Move the pgdat/zone initialization in free_area_init_core to its
    own function.
 3) Introduce free_area_init_core_hotplug, a small subset of
    free_area_init_core, which is only called from memhotlug code path. In this
    way, we have:

    free_area_init_core: called during early initialization
    free_area_init_core_hotplug: called whenever a new node is allocated/re-used (memhotplug path)

This patch (of 5):

Moving the #ifdefs out of the function makes it easier to follow.

Link: http://lkml.kernel.org/r/20180730101757.28058-2-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:45 -07:00
Aaron Lu d8a759b570 mm, page_alloc: double zone's batchsize
To improve page allocator's performance for order-0 pages, each CPU has
a Per-CPU-Pageset(PCP) per zone.  Whenever an order-0 page is needed,
PCP will be checked first before asking pages from Buddy.  When PCP is
used up, a batch of pages will be fetched from Buddy to improve
performance and the size of batch can affect performance.

zone's batch size gets doubled last time by commit ba56e91c9401("mm:
page_alloc: increase size of per-cpu-pages") over ten years ago.  Since
then, CPU has envolved a lot and CPU's cache sizes also increased.

Dave Hansen is concerned the current batch size doesn't fit well with
modern hardware and suggested me to do two things: first, use a page
allocator intensive benchmark, e.g.  will-it-scale/page_fault1 to find
out how performance changes with different batch sizes on various
machines and then choose a new default batch size; second, see how this
new batch size work with other workloads.

In the first test, we saw performance gains on high-core-count systems
and little to no effect on older systems with more modest core counts.
In this phase's test data, two candidates: 63 and 127 are chosen.

In the second step, ebizzy, oltp, kbuild, pigz, netperf, vm-scalability
and more will-it-scale sub-tests are tested to see how these two
candidates work with these workloads and decides a new default according
to their results.

Most test results are flat.  will-it-scale/page_fault2 process mode has
10%-18% performance increase on 4-sockets Skylake and Broadwell.
vm-scalability/lru-file-mmap-read has 17%-47% performance increase for
4-sockets servers while for 2-sockets servers, it caused 3%-8% performance
drop.  Further analysis showed that, with a larger pcp->batch and thus
larger pcp->high(the relationship of pcp->high=6 * pcp->batch is
maintained in this patch), zone lock contention shifted to LRU add side
lock contention and that caused performance drop.  This performance drop
might be mitigated by others' work on optimizing LRU lock.

Another downside of increasing pcp->batch is, when PCP is used up and need
to fetch a batch of pages from Buddy, since batch is increased, that time
can be longer than before.  My understanding is, this doesn't affect
slowpath where direct reclaim and compaction dominates.  For fastpath,
throughput is a win(according to will-it-scale/page_fault1) but worst
latency can be larger now.

Overall, I think double the batch size from 31 to 63 is relatively safe
and provide good performance boost for high-core-count systems.

The two phase's test results are listed below(all tests are done with THP
disabled).

Phase one(will-it-scale/page_fault1) test results:

Skylake-EX: increased batch size has a good effect on zone->lock
contention, though LRU contention will rise at the same time and
limited the final performance increase.

batch   score     change   zone_contention   lru_contention   total_contention
 31   15345900    +0.00%       64%                 8%           72%
 53   17903847   +16.67%       32%                38%           70%
 63   17992886   +17.25%       24%                45%           69%
 73   18022825   +17.44%       10%                61%           71%
119   18023401   +17.45%        4%                66%           70%
127   18029012   +17.48%        3%                66%           69%
137   18036075   +17.53%        4%                66%           70%
165   18035964   +17.53%        2%                67%           69%
188   18101105   +17.95%        2%                67%           69%
223   18130951   +18.15%        2%                67%           69%
255   18118898   +18.07%        2%                67%           69%
267   18101559   +17.96%        2%                67%           69%
299   18160468   +18.34%        2%                68%           70%
320   18139845   +18.21%        2%                67%           69%
393   18160869   +18.34%        2%                68%           70%
424   18170999   +18.41%        2%                68%           70%
458   18144868   +18.24%        2%                68%           70%
467   18142366   +18.22%        2%                68%           70%
498   18154549   +18.30%        1%                68%           69%
511   18134525   +18.17%        1%                69%           70%

Broadwell-EX: similar pattern as Skylake-EX.

batch   score     change   zone_contention   lru_contention   total_contention
 31   16703983    +0.00%       67%                 7%           74%
 53   18195393    +8.93%       43%                28%           71%
 63   18288885    +9.49%       38%                33%           71%
 73   18344329    +9.82%       35%                37%           72%
119   18535529   +10.96%       24%                46%           70%
127   18513596   +10.83%       23%                48%           71%
137   18514327   +10.84%       23%                48%           71%
165   18511840   +10.82%       22%                49%           71%
188   18593478   +11.31%       17%                53%           70%
223   18601667   +11.36%       17%                52%           69%
255   18774825   +12.40%       12%                58%           70%
267   18754781   +12.28%        9%                60%           69%
299   18892265   +13.10%        7%                63%           70%
320   18873812   +12.99%        8%                62%           70%
393   18891174   +13.09%        6%                64%           70%
424   18975108   +13.60%        6%                64%           70%
458   18932364   +13.34%        8%                62%           70%
467   18960891   +13.51%        5%                65%           70%
498   18944526   +13.41%        5%                64%           69%
511   18960839   +13.51%        5%                64%           69%

Skylake-EP: although increased batch reduced zone->lock contention, but
the effect is not as good as EX: zone->lock contention is still as high as
20% with a very high batch value instead of 1% on Skylake-EX or 5% on
Broadwell-EX.  Also, total_contention actually decreased with a higher
batch but that doesn't translate to performance increase.

batch   score    change   zone_contention   lru_contention   total_contention
 31   9554867    +0.00%       66%                 3%           69%
 53   9855486    +3.15%       63%                 3%           66%
 63   9980145    +4.45%       62%                 4%           66%
 73   10092774   +5.63%       62%                 5%           67%
119   10310061   +7.90%       45%                19%           64%
127   10342019   +8.24%       42%                19%           61%
137   10358182   +8.41%       42%                21%           63%
165   10397060   +8.81%       37%                24%           61%
188   10341808   +8.24%       34%                26%           60%
223   10349135   +8.31%       31%                27%           58%
255   10327189   +8.08%       28%                29%           57%
267   10344204   +8.26%       27%                29%           56%
299   10325043   +8.06%       25%                30%           55%
320   10310325   +7.91%       25%                31%           56%
393   10293274   +7.73%       21%                31%           52%
424   10311099   +7.91%       21%                32%           53%
458   10321375   +8.02%       21%                32%           53%
467   10303881   +7.84%       21%                32%           53%
498   10332462   +8.14%       20%                33%           53%
511   10325016   +8.06%       20%                32%           52%

Broadwell-EP: zone->lock and lru lock had an agreement to make sure
performance doesn't increase and they successfully managed to keep total
contention at 70%.

batch   score    change   zone_contention   lru_contention   total_contention
 31   10121178   +0.00%       19%                50%           69%
 53   10142366   +0.21%        6%                63%           69%
 63   10117984   -0.03%       11%                58%           69%
 73   10123330   +0.02%        7%                63%           70%
119   10108791   -0.12%        2%                67%           69%
127   10166074   +0.44%        3%                66%           69%
137   10141574   +0.20%        3%                66%           69%
165   10154499   +0.33%        2%                68%           70%
188   10124921   +0.04%        2%                67%           69%
223   10137399   +0.16%        2%                67%           69%
255   10143289   +0.22%        0%                68%           68%
267   10123535   +0.02%        1%                68%           69%
299   10140952   +0.20%        0%                68%           68%
320   10163170   +0.41%        0%                68%           68%
393   10000633   -1.19%        0%                69%           69%
424   10087998   -0.33%        0%                69%           69%
458   10187116   +0.65%        0%                69%           69%
467   10146790   +0.25%        0%                69%           69%
498   10197958   +0.76%        0%                69%           69%
511   10152326   +0.31%        0%                69%           69%

Haswell-EP: similar to Broadwell-EP.

batch   score   change   zone_contention   lru_contention   total_contention
 31   10442205   +0.00%       14%                48%           62%
 53   10442255   +0.00%        5%                57%           62%
 63   10452059   +0.09%        6%                57%           63%
 73   10482349   +0.38%        5%                59%           64%
119   10454644   +0.12%        3%                60%           63%
127   10431514   -0.10%        3%                59%           62%
137   10423785   -0.18%        3%                60%           63%
165   10481216   +0.37%        2%                61%           63%
188   10448755   +0.06%        2%                61%           63%
223   10467144   +0.24%        2%                61%           63%
255   10480215   +0.36%        2%                61%           63%
267   10484279   +0.40%        2%                61%           63%
299   10466450   +0.23%        2%                61%           63%
320   10452578   +0.10%        2%                61%           63%
393   10499678   +0.55%        1%                62%           63%
424   10481454   +0.38%        1%                62%           63%
458   10473562   +0.30%        1%                62%           63%
467   10484269   +0.40%        0%                62%           62%
498   10505599   +0.61%        0%                62%           62%
511   10483395   +0.39%        0%                62%           62%

Westmere-EP: contention is pretty small so not interesting.  Note too high
a batch value could hurt performance.

batch   score   change   zone_contention   lru_contention   total_contention
 31   4831523   +0.00%        2%                 3%            5%
 53   4834086   +0.05%        2%                 4%            6%
 63   4834262   +0.06%        2%                 3%            5%
 73   4832851   +0.03%        2%                 4%            6%
119   4830534   -0.02%        1%                 3%            4%
127   4827461   -0.08%        1%                 4%            5%
137   4827459   -0.08%        1%                 3%            4%
165   4820534   -0.23%        0%                 4%            4%
188   4817947   -0.28%        0%                 3%            3%
223   4809671   -0.45%        0%                 3%            3%
255   4802463   -0.60%        0%                 4%            4%
267   4801634   -0.62%        0%                 3%            3%
299   4798047   -0.69%        0%                 3%            3%
320   4793084   -0.80%        0%                 3%            3%
393   4785877   -0.94%        0%                 3%            3%
424   4782911   -1.01%        0%                 3%            3%
458   4779346   -1.08%        0%                 3%            3%
467   4780306   -1.06%        0%                 3%            3%
498   4780589   -1.05%        0%                 3%            3%
511   4773724   -1.20%        0%                 3%            3%

Skylake-Desktop: similar to Westmere-EP, nothing interesting.

batch   score   change   zone_contention   lru_contention   total_contention
 31   3906608   +0.00%        2%                 3%            5%
 53   3940164   +0.86%        2%                 3%            5%
 63   3937289   +0.79%        2%                 3%            5%
 73   3940201   +0.86%        2%                 3%            5%
119   3933240   +0.68%        2%                 3%            5%
127   3930514   +0.61%        2%                 4%            6%
137   3938639   +0.82%        0%                 3%            3%
165   3908755   +0.05%        0%                 3%            3%
188   3905621   -0.03%        0%                 3%            3%
223   3903015   -0.09%        0%                 4%            4%
255   3889480   -0.44%        0%                 3%            3%
267   3891669   -0.38%        0%                 4%            4%
299   3898728   -0.20%        0%                 4%            4%
320   3894547   -0.31%        0%                 4%            4%
393   3875137   -0.81%        0%                 4%            4%
424   3874521   -0.82%        0%                 3%            3%
458   3880432   -0.67%        0%                 4%            4%
467   3888715   -0.46%        0%                 3%            3%
498   3888633   -0.46%        0%                 4%            4%
511   3875305   -0.80%        0%                 5%            5%

Haswell-Desktop: zone->lock is pretty low as other desktops, though lru
contention is higher than other desktops.

batch   score   change   zone_contention   lru_contention   total_contention
 31   3511158   +0.00%        2%                 5%            7%
 53   3555445   +1.26%        2%                 6%            8%
 63   3561082   +1.42%        2%                 6%            8%
 73   3547218   +1.03%        2%                 6%            8%
119   3571319   +1.71%        1%                 7%            8%
127   3549375   +1.09%        0%                 6%            6%
137   3560233   +1.40%        0%                 6%            6%
165   3555176   +1.25%        2%                 6%            8%
188   3551501   +1.15%        0%                 8%            8%
223   3531462   +0.58%        0%                 7%            7%
255   3570400   +1.69%        0%                 7%            7%
267   3532235   +0.60%        1%                 8%            9%
299   3562326   +1.46%        0%                 6%            6%
320   3553569   +1.21%        0%                 8%            8%
393   3539519   +0.81%        0%                 7%            7%
424   3549271   +1.09%        0%                 8%            8%
458   3528885   +0.50%        0%                 8%            8%
467   3526554   +0.44%        0%                 7%            7%
498   3525302   +0.40%        0%                 9%            9%
511   3527556   +0.47%        0%                 8%            8%

Sandybridge-Desktop: the 0% contention isn't accurate but caused by
dropped fractional part. Since multiple contention path's contentions
are all under 1% here, with some arithmetic operations like add, the
final deviation could be as large as 3%.

batch   score   change   zone_contention   lru_contention   total_contention
 31   1744495   +0.00%        0%                 0%            0%
 53   1755341   +0.62%        0%                 0%            0%
 63   1758469   +0.80%        0%                 0%            0%
 73   1759626   +0.87%        0%                 0%            0%
119   1770417   +1.49%        0%                 0%            0%
127   1768252   +1.36%        0%                 0%            0%
137   1767848   +1.34%        0%                 0%            0%
165   1765088   +1.18%        0%                 0%            0%
188   1766918   +1.29%        0%                 0%            0%
223   1767866   +1.34%        0%                 0%            0%
255   1768074   +1.35%        0%                 0%            0%
267   1763187   +1.07%        0%                 0%            0%
299   1765620   +1.21%        0%                 0%            0%
320   1767603   +1.32%        0%                 0%            0%
393   1764612   +1.15%        0%                 0%            0%
424   1758476   +0.80%        0%                 0%            0%
458   1758593   +0.81%        0%                 0%            0%
467   1757915   +0.77%        0%                 0%            0%
498   1753363   +0.51%        0%                 0%            0%
511   1755548   +0.63%        0%                 0%            0%

Phase two test results:
Note: all percent change is against base(batch=31).

ebizzy.throughput (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    2410037±7%     2600451±2% +7.9%     2602878 +8.0%
lkp-bdw-ex1     1493328        1489243    -0.3%     1492145 -0.1%
lkp-skl-2sp2    1329674        1345891    +1.2%     1351056 +1.6%
lkp-bdw-ep2      711511         711511     0.0%      710708 -0.1%
lkp-wsm-ep2       75750          75528    -0.3%       75441 -0.4%
lkp-skl-d01      264126         262791    -0.5%      264113 +0.0%
lkp-hsw-d01      176601         176328    -0.2%      176368 -0.1%
lkp-sb02          98937          98937    +0.0%       99030 +0.1%

kbuild.buildtime (less is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     107.00        107.67  +0.6%        107.11  +0.1%
lkp-bdw-ex1       97.33         97.33  +0.0%         97.42  +0.1%
lkp-skl-2sp2     180.00        179.83  -0.1%        179.83  -0.1%
lkp-bdw-ep2      178.17        179.17  +0.6%        177.50  -0.4%
lkp-wsm-ep2      737.00        738.00  +0.1%        738.00  +0.1%
lkp-skl-d01      642.00        653.00  +1.7%        653.00  +1.7%
lkp-hsw-d01     1310.00       1316.00  +0.5%       1311.00  +0.1%

netperf/TCP_STREAM.Throughput_total_Mbps (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     948790        947144  -0.2%        948333 -0.0%
lkp-bdw-ex1      904224        904366  +0.0%        904926 +0.1%
lkp-skl-2sp2     239731        239607  -0.1%        239565 -0.1%
lk-bdw-ep2       365764        365933  +0.0%        365951 +0.1%
lkp-wsm-ep2       93736         93803  +0.1%         93808 +0.1%
lkp-skl-d01       77314         77303  -0.0%         77375 +0.1%
lkp-hsw-d01       58617         60387  +3.0%         60208 +2.7%
lkp-sb02          29990         30137  +0.5%         30103 +0.4%

oltp.transactions (higer is better)

machine         batch=31      batch=63             batch=127
lkp-bdw-ex1      9073276       9100377     +0.3%    9036344     -0.4%
lkp-skl-2sp2     8898717       8852054     -0.5%    8894459     -0.0%
lkp-bdw-ep2     13426155      13384654     -0.3%   13333637     -0.7%
lkp-hsw-ep2     13146314      13232784     +0.7%   13193163     +0.4%
lkp-wsm-ep2      5035355       5019348     -0.3%    5033418     -0.0%
lkp-skl-d01       418485       4413339     -0.1%    4419039     +0.0%
lkp-hsw-d01      3517817±5%    3396120±3%  -3.5%    3455138±3%  -1.8%

pigz.throughput (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    1.513e+08     1.507e+08 -0.4%      1.511e+08 -0.2%
lkp-bdw-ex1     2.060e+08     2.052e+08 -0.4%      2.044e+08 -0.8%
lkp-skl-2sp2    8.836e+08     8.845e+08 +0.1%      8.836e+08 -0.0%
lkp-bdw-ep2     8.275e+08     8.464e+08 +2.3%      8.330e+08 +0.7%
lkp-wsm-ep2     2.224e+08     2.221e+08 -0.2%      2.218e+08 -0.3%
lkp-skl-d01     1.177e+08     1.177e+08 -0.0%      1.176e+08 -0.1%
lkp-hsw-d01     1.154e+08     1.154e+08 +0.1%      1.154e+08 -0.0%
lkp-sb02        0.633e+08     0.633e+08 +0.1%      0.633e+08 +0.0%

will-it-scale.malloc1.processes (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1      620181       620484 +0.0%         620240 +0.0%
lkp-bdw-ex1      1403610      1401201 -0.2%        1417900 +1.0%
lkp-skl-2sp2     1288097      1284145 -0.3%        1283907 -0.3%
lkp-bdw-ep2      1427879      1427675 -0.0%        1428266 +0.0%
lkp-hsw-ep2      1362546      1353965 -0.6%        1354759 -0.6%
lkp-wsm-ep2      2099657      2107576 +0.4%        2100226 +0.0%
lkp-skl-d01      1476835      1476358 -0.0%        1474487 -0.2%
lkp-hsw-d01      1308810      1303429 -0.4%        1301299 -0.6%
lkp-sb02          589286       589284 -0.0%         588101 -0.2%

will-it-scale.malloc1.threads (higher is better)
machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     21289         21125     -0.8%      21241     -0.2%
lkp-bdw-ex1      28114         28089     -0.1%      28007     -0.4%
lkp-skl-2sp2     91866         91946     +0.1%      92723     +0.9%
lkp-bdw-ep2      37637         37501     -0.4%      37317     -0.9%
lkp-hsw-ep2      43673         43590     -0.2%      43754     +0.2%
lkp-wsm-ep2      28577         28298     -1.0%      28545     -0.1%
lkp-skl-d01     175277        173343     -1.1%     173082     -1.3%
lkp-hsw-d01     130303        129566     -0.6%     129250     -0.8%
lkp-sb02        113742±3%     116911     +2.8%     116417±3%  +2.4%

will-it-scale.malloc2.processes (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    1.206e+09     1.206e+09 -0.0%      1.206e+09 +0.0%
lkp-bdw-ex1     1.319e+09     1.319e+09 -0.0%      1.319e+09 +0.0%
lkp-skl-2sp2    8.000e+08     8.021e+08 +0.3%      7.995e+08 -0.1%
lkp-bdw-ep2     6.582e+08     6.634e+08 +0.8%      6.513e+08 -1.1%
lkp-hsw-ep2     6.671e+08     6.669e+08 -0.0%      6.665e+08 -0.1%
lkp-wsm-ep2     1.805e+08     1.806e+08 +0.0%      1.804e+08 -0.1%
lkp-skl-d01     1.611e+08     1.611e+08 -0.0%      1.610e+08 -0.0%
lkp-hsw-d01     1.333e+08     1.332e+08 -0.0%      1.332e+08 -0.0%
lkp-sb02         82485104      82478206 -0.0%       82473546 -0.0%

will-it-scale.malloc2.threads (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    1.574e+09     1.574e+09 -0.0%      1.574e+09 -0.0%
lkp-bdw-ex1     1.737e+09     1.737e+09 +0.0%      1.737e+09 -0.0%
lkp-skl-2sp2    9.161e+08     9.162e+08 +0.0%      9.181e+08 +0.2%
lkp-bdw-ep2     7.856e+08     8.015e+08 +2.0%      8.113e+08 +3.3%
lkp-hsw-ep2     6.908e+08     6.904e+08 -0.1%      6.907e+08 -0.0%
lkp-wsm-ep2     2.409e+08     2.409e+08 +0.0%      2.409e+08 -0.0%
lkp-skl-d01     1.199e+08     1.199e+08 -0.0%      1.199e+08 -0.0%
lkp-hsw-d01     1.029e+08     1.029e+08 -0.0%      1.029e+08 +0.0%
lkp-sb02         68081213      68061423 -0.0%       68076037 -0.0%

will-it-scale.page_fault2.processes (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    14509125±4%   16472364 +13.5%       17123117 +18.0%
lkp-bdw-ex1     14736381      16196588  +9.9%       16364011 +11.0%
lkp-skl-2sp2     6354925       6435444  +1.3%        6436644  +1.3%
lkp-bdw-ep2      8749584       8834422  +1.0%        8827179  +0.9%
lkp-hsw-ep2      8762591       8845920  +1.0%        8825697  +0.7%
lkp-wsm-ep2      3036083       3030428  -0.2%        3021741  -0.5%
lkp-skl-d01      2307834       2304731  -0.1%        2286142  -0.9%
lkp-hsw-d01      1806237       1800786  -0.3%        1795943  -0.6%
lkp-sb02          842616        837844  -0.6%         833921  -1.0%

will-it-scale.page_fault2.threads

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     1623294       1615132±2% -0.5%     1656777    +2.1%
lkp-bdw-ex1      1995714       2025948    +1.5%     2113753±3% +5.9%
lkp-skl-2sp2     2346708       2415591    +2.9%     2416919    +3.0%
lkp-bdw-ep2      2342564       2344882    +0.1%     2300206    -1.8%
lkp-hsw-ep2      1820658       1831681    +0.6%     1844057    +1.3%
lkp-wsm-ep2      1725482       1733774    +0.5%     1740517    +0.9%
lkp-skl-d01      1832833       1823628    -0.5%     1806489    -1.4%
lkp-hsw-d01      1427913       1427287    -0.0%     1420226    -0.5%
lkp-sb02          750626        748615    -0.3%      746621    -0.5%

will-it-scale.page_fault3.processes (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    24382726      24400317 +0.1%       24668774 +1.2%
lkp-bdw-ex1     35399750      35683124 +0.8%       35829492 +1.2%
lkp-skl-2sp2    28136820      28068248 -0.2%       28147989 +0.0%
lkp-bdw-ep2     37269077      37459490 +0.5%       37373073 +0.3%
lkp-hsw-ep2     36224967      36114085 -0.3%       36104908 -0.3%
lkp-wsm-ep2     16820457      16911005 +0.5%       16968596 +0.9%
lkp-skl-d01      7721138       7725904 +0.1%        7756740 +0.5%
lkp-hsw-d01      7611979       7650928 +0.5%        7651323 +0.5%
lkp-sb02         3781546       3796502 +0.4%        3796827 +0.4%

will-it-scale.page_fault3.threads (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     1865820±3%   1900917±2%  +1.9%     1826245±4%  -2.1%
lkp-bdw-ex1      3094060      3148326     +1.8%     3150036     +1.8%
lkp-skl-2sp2     3952940      3953898     +0.0%     3989360     +0.9%
lkp-bdw-ep2      3420373±3%   3643964     +6.5%     3644910±5%  +6.6%
lkp-hsw-ep2      2609635±2%   2582310±3%  -1.0%     2780459     +6.5%
lkp-wsm-ep2      4395001      4417196     +0.5%     4432499     +0.9%
lkp-skl-d01      5363977      5400003     +0.7%     5411370     +0.9%
lkp-hsw-d01      5274131      5311294     +0.7%     5319359     +0.9%
lkp-sb02         2917314      2913004     -0.1%     2935286     +0.6%

will-it-scale.read1.processes (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    73762279±14%  69322519±10% -6.0%    69349855±13%  -6.0% (result unstable)
lkp-bdw-ex1     1.701e+08     1.704e+08    +0.1%    1.705e+08     +0.2%
lkp-skl-2sp2    63111570      63113953     +0.0%    63836573      +1.1%
lkp-bdw-ep2     79247409      79424610     +0.2%    78012656      -1.6%
lkp-hsw-ep2     67677026      68308800     +0.9%    67539106      -0.2%
lkp-wsm-ep2     13339630      13939817     +4.5%    13766865      +3.2%
lkp-skl-d01     10969487      10972650     +0.0%    no data
lkp-hsw-d01     9857342±2%    10080592±2%  +2.3%    10131560      +2.8%
lkp-sb02        5189076        5197473     +0.2%    5163253       -0.5%

will-it-scale.read1.threads (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    62468045±12%  73666726±7% +17.9%    79553123±12% +27.4% (result unstable)
lkp-bdw-ex1     1.62e+08      1.624e+08    +0.3%    1.614e+08     -0.3%
lkp-skl-2sp2    58319780      59181032     +1.5%    59821353      +2.6%
lkp-bdw-ep2     74057992      75698171     +2.2%    74990869      +1.3%
lkp-hsw-ep2     63672959      63639652     -0.1%    64387051      +1.1%
lkp-wsm-ep2     13489943      13526058     +0.3%    13259032      -1.7%
lkp-skl-d01     10297906      10338796     +0.4%    10407328      +1.1%
lkp-hsw-d01      9636721       9667376     +0.3%     9341147      -3.1%
lkp-sb02         4801938       4804496     +0.1%     4802290      +0.0%

will-it-scale.write1.processes (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    1.111e+08     1.104e+08±2%  -0.7%   1.122e+08±2%  +1.0%
lkp-bdw-ex1     1.392e+08     1.399e+08     +0.5%   1.397e+08     +0.4%
lkp-skl-2sp2     59369233      58994841     -0.6%    58715168     -1.1%
lkp-bdw-ep2      61820979      CPU throttle          63593123     +2.9%
lkp-hsw-ep2      57897587      57435605     -0.8%    56347450     -2.7%
lkp-wsm-ep2       7814203       7918017±2%  +1.3%     7669068     -1.9%
lkp-skl-d01       8886557       8971422     +1.0%     8818366     -0.8%
lkp-hsw-d01       9171001±5%    9189915     +0.2%     9483909     +3.4%
lkp-sb02          4475406       4475294     -0.0%     4501756     +0.6%

will-it-scale.write1.threads (higer is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    1.058e+08     1.055e+08±2%  -0.2%   1.065e+08  +0.7%
lkp-bdw-ex1     1.316e+08     1.300e+08     -1.2%   1.308e+08  -0.6%
lkp-skl-2sp2     54492421      56086678     +2.9%    55975657  +2.7%
lkp-bdw-ep2      59360449      59003957     -0.6%    58101262  -2.1%
lkp-hsw-ep2      53346346±2%   52530876     -1.5%    52902487  -0.8%
lkp-wsm-ep2       7774006       7800092±2%  +0.3%     7558833  -2.8%
lkp-skl-d01       8346174       8235695     -1.3%     no data
lkp-hsw-d01       8636244       8655731     +0.2%     8658868  +0.3%
lkp-sb02          4181820       4204107     +0.5%     4182992  +0.0%

vm-scalability.anon-r-rand.throughput (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    11933873±3%   12356544±2%  +3.5%   12188624     +2.1%
lkp-bdw-ex1      7114424±2%    7330949±2%  +3.0%    7392419     +3.9%
lkp-skl-2sp2     6773277±5%    6492332±8%  -4.1%    6543962     -3.4%
lkp-bdw-ep2      7133846±4%    7233508     +1.4%    7013518±3%  -1.7%
lkp-hsw-ep2      4576626       4527098     -1.1%    4551679     -0.5%
lkp-wsm-ep2      2583599       2592492     +0.3%    2588039     +0.2%
lkp-hsw-d01       998199±2%    1028311     +3.0%    1006460±2%  +0.8%
lkp-sb02          570572        567854     -0.5%     568449     -0.4%

vm-scalability.anon-r-rand-mt.throughput (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     1789419       1787830     -0.1%    1788208     -0.1%
lkp-bdw-ex1      3492595±2%    3554966±2%  +1.8%    3558835±3%  +1.9%
lkp-skl-2sp2     3856238±2%    3975403±4%  +3.1%    3994600     +3.6%
lkp-bdw-ep2      3726963±11%   3809292±6%  +2.2%    3871924±4%  +3.9%
lkp-hsw-ep2      2131760±3%    2033578±4%  -4.6%    2130727±6%  -0.0%
lkp-wsm-ep2      2369731       2368384     -0.1%    2370252     +0.0%
lkp-skl-d01      1207128       1206220     -0.1%    1205801     -0.1%
lkp-hsw-d01       964317        992329±2%  +2.9%     992099±2%  +2.9%
lkp-sb02          567137        567346     +0.0%     566144     -0.2%

vm-scalability.lru-file-mmap-read.throughput (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1    19560469±6%   23018999     +17.7%   23418800     +19.7%
lkp-bdw-ex1     17769135±14%  26141676±3%  +47.1%   26284723±5%  +47.9%
lkp-skl-2sp2    14056512      13578884      -3.4%   13146214      -6.5%
lkp-bdw-ep2     15336542      14737654      -3.9%   14088159      -8.1%
lkp-hsw-ep2     16275498      15756296      -3.2%   15018090      -7.7%
lkp-wsm-ep2     11272160      11237231      -0.3%   11310047      +0.3%
lkp-skl-d01      7322119       7324569      +0.0%    7184148      -1.9%
lkp-hsw-d01      6449234       6404542      -0.7%    6356141      -1.4%
lkp-sb02         3517943       3520668      +0.1%    3527309      +0.3%

vm-scalability.lru-file-mmap-read-rand.throughput (higher is better)

machine         batch=31      batch=63             batch=127
lkp-skl-4sp1     1689052       1697553  +0.5%       1698726  +0.6%
lkp-bdw-ex1      1675246       1699764  +1.5%       1712226  +2.2%
lkp-skl-2sp2     1800533       1799749  -0.0%       1800581  +0.0%
lkp-bdw-ep2      1807422       1807758  +0.0%       1804932  -0.1%
lkp-hsw-ep2      1809807       1808781  -0.1%       1807811  -0.1%
lkp-wsm-ep2      1800198       1802434  +0.1%       1801236  +0.1%
lkp-skl-d01       696689        695537  -0.2%        694106  -0.4%
lkp-hsw-d01       698364        698666  +0.0%        696686  -0.2%
lkp-sb02          258939        258787  -0.1%        258199  -0.3%

Link: http://lkml.kernel.org/r/20180711055855.29072-1-aaron.lu@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:32 -07:00