Clean up: There's little chance of contention between the use of
rb_lock and rb_reqslock, so merge the two. This avoids having to
take both in some (possibly future) cases.
Transport tear-down is already serialized, thus there is no need for
locking at all when destroying rpcrdma_reqs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For better observability of parsing errors, return the error code
generated in the decoders to the upper layer consumer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ffe1f0df58 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate request_module() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 431f6eb357 ("SUNRPC: Add a label for RPC calls that require
allocation on receive") didn't update similar logic in rpc_rdma.c.
I don't think this is a bug, per-se; the commit just adds more
careful checking for broken upper layer behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Having to specify "proto=rdma,port=20049" is cumbersome.
RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative
well-known port number", which is 20049. Make the use of the well-
known port number automatic, just as it is for NFS/TCP and port
2049.
For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as
the default or use rpcbind. I don't know of an NFS/RDMA server
implementation that registers it's NFS/RDMA service with rpcbind,
so automatically choosing 20049 seems like the better choice. The
other widely-deployed NFS/RDMA client, Solaris, also uses 20049
as the default port.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Place the associated RPC transaction's XID in the upper 32 bits of
each RDMA segment's rdma_offset field. There are two reasons to do
this:
- The R_key only has 8 bits that are different from registration to
registration. The XID adds more uniqueness to each RDMA segment to
reduce the likelihood of a software bug on the server reading from
or writing into memory it's not supposed to.
- On-the-wire RDMA Read and Write requests do not otherwise carry
any identifier that matches them up to an RPC. The XID in the
upper 32 bits will act as an eye-catcher in network captures.
Suggested-by: Tom Talpey <ttalpey@microsoft.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Now that there is only FRWR, there is no need for a memory
registration switch. The indirect calls to the memreg operations can
be replaced with faster direct calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
FMR is not supported on most recent RDMA devices. It is also less
secure than FRWR because an FMR memory registration can expose
adjacent bytes to remote reading or writing. As discussed during the
RDMA BoF at LPC 2018, it is time to remove support for FMR in the
NFS/RDMA client stack.
Note that NFS/RDMA server-side uses either local memory registration
or FRWR. FMR is not used.
There are a few Infiniband/RoCE devices in the kernel tree that do
not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will
not support client-side NFS/RDMA after this patch. These are:
- mthca
- qib
- hns (RoCE)
Users of these devices can use NFS/TCP on IPoIB instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some devices advertise a large max_fast_reg_page_list_len
capability, but perform optimally when MRs are significantly smaller
than that depth -- probably when the MR itself is no larger than a
page.
By default, the RDMA R/W core API uses max_sge_rd as the maximum
page depth for MRs. For some devices, the value of max_sge_rd is
1, which is also not optimal. Thus, when max_sge_rd is larger than
1, use that value. Otherwise use the value of the
max_fast_reg_page_list_len attribute.
I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It
reproducibly improves the throughput of large I/Os by several
percent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can
fail with EMSGSIZE. This is because the calculated value of
ri_max_segs (the max number of MRs per RPC) exceeded
RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to
walk off the end of the transport header.
Once that was addressed, the ro_maxpages result has to be corrected
to account for the number of MRs needed for Reply chunks, which is
2 MRs smaller than a normal Read or Write chunk.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transport disconnect processing does a "wake pending tasks" at
various points.
Suppose an RPC Reply is being processed. The RPC task that Reply
goes with is waiting on the pending queue. If a disconnect wake-up
happens before reply processing is done, that reply, even if it is
good, is thrown away, and the RPC has to be sent again.
This window apparently does not exist for socket transports because
there is a lock held while a reply is being received which prevents
the wake-up call until after reply processing is done.
To resolve this, all RPC replies being processed on an RPC-over-RDMA
transport have to complete before pending tasks are awoken due to a
transport disconnect.
Callers that already hold the transport write lock may invoke
->ops->close directly. Others use a generic helper that schedules
a close when the write lock can be taken safely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After thinking about this more, and auditing other kernel ULP imple-
mentations, I believe that a DISCONNECT cm_event will occur after a
fatal QP event. If that's the case, there's no need for an explicit
disconnect in the QP event handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To address a connection-close ordering problem, we need the ability
to drain the RPC completions running on rpcrdma_receive_wq for just
one transport. Give each transport its own RPC completion workqueue,
and drain that workqueue when disconnecting the transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Divide the work cleanly:
- rpcrdma_wc_receive is responsible only for RDMA Receives
- rpcrdma_reply_handler is responsible only for RPC Replies
- the posted send and receive counts both belong in rpcrdma_ep
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR.
frwr_release_mr does not DMA-unmap, but the recycle worker does.
Fixes: 61da886bf7 ("xprtrdma: Explicitly resetting MRs is ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While chasing yet another set of DMAR fault reports, I noticed that
the frwr recycler conflates whether or not an MR has been DMA
unmapped with frwr->fr_state. Actually the two have only an indirect
relationship. It's in fact impossible to guess reliably whether the
MR has been DMA unmapped based on its fr_state field, especially as
the surrounding code and its assumptions have changed over time.
A better approach is to track the DMA mapping status explicitly so
that the recycler is less brittle to unexpected situations, and
attempts to DMA-unmap a second time are prevented.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.20
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to add advise_mr to the list of operation setters on the ib_device
or otherwise callers to ib_set_device_ops() for advise_mr operation will
not have their callback registered.
When the advise_mr series was merged with the device ops series the
SET_DEVICE_OPS() was missed.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().
This reverts commit bb7e22a8ab.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From device point of view both XRC target and initiator are XRC transport
type.
Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.
Fixes: 5aa3771ded ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a comment to perf_session__register_idle_thread() to bring attention to
a pitfall with the idle task thread structure. The pitfall is that there
should really be a 'struct thread' for the idle task of each cpu, but there
is only one that can have pid == tid == 0.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf creates a single 'struct thread' to represent the idle task. That
is because threads are identified by PID and TID, and the idle task
always has PID == TID == 0.
However, there are actually separate idle tasks for each CPU. That
creates a problem for thread stack processing which assumes that each
thread has a single stack, not one stack per CPU.
Fix that by passing through the CPU number, and in the case of the idle
"thread", pick the thread stack from an array based on the CPU number.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
allocate an array of thread stacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-7-adrian.hunter@intel.com
[ No need to check for NULL when calling zfree(), noticed by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
factor out thread_stack__init().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
allow for a thread stack array.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
avoid direct reference to the thread's stack. The thread stack will
change to an array of thread stacks, at which point the meaning of the
direct reference will change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-4-adrian.hunter@intel.com
[ Rename thread_stack__ts() to thread__stack() since this operates on a 'thread' struct ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
tidy thread_stack__bottom() usage. Specifically, the parameter 'thread'
is not needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for fixing thread stack processing for the idle task,
simplify some code in thread_stack__process().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.
Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal IP can produce interrupts on overheat situation.
Describe them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal IP can produce interrupts on overheat situation.
Describe them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The IP can manage to trigger interrupts on overheat situation from all
the sensors.
However, the interrupt source changes along with the last selected
source (ie. the last read sensor), which is an inconsistent behavior.
Avoid possible glitches by always selecting back only one channel which
will then be referenced as the "overheat_sensor" (arbitrarily: the first
in the DT which has a critical trip point filled in).
It is possible that the scan of all thermal zone nodes did not bring a
critical trip point from which the overheat interrupt could be
configured. In this case just complain but do not fail the probe.
Also disable sensor switch during overheat situations because changing
the channel while the system is too hot could clear the overheat state
by changing the source while the temperature is still very high.
Even if the overheat state is not declared, overheat interrupt must be
cleared by reading the DFX interrupt cause _after_ the temperature has
fallen down to the low threshold, otherwise future possible interrupts
would not be served. A work polls the corresponding register until the
overheat flag gets cleared in this case.
Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When STM32_THERMAL is enabled, this overrides all previously
enabled files in the same directory, as seen from this link failure:
ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
The correct syntax in Makefile requires using += instead of :=.
Fixes: 1d69315560 ("thermal: add stm32 thermal driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal controller implementation on Tegra194 is very similar to the
implementation on Tegra186. Add a compatible string for the new
generation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Put return value checks of calling imx_init_from_nvmem_cells()
into one block to save one condition block for normal case.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal driver is a standalone driver for monitoring SoC temperature
by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ
is NOT set. So remove the dependency with CPU_THERMAL.
Introduce dummy function of legacy cooling register/unregister to make
thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.
Without this patch we would see below error on DB820c.
qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
RZ/G2M also has 3 interrupts routed to the TSC, but the list was not
updated to reflect this.
Just drop the list, as this is the case for this TSC variant in all
R-Car Gen3 and RZ/G2 SoCs.
Fixes: be6af481f3 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a774a1 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Using devm_thermal_zone_of_sensor_register allows to simplify some
error handling code, drop a label, and drop the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Avoid warnings like this:
thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function]
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
Fixes: 0dd88793aa ("thermal: hwmon: move hwmon support to single file")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Chuck Lever