Due to inode number reuse in filesystems, we can end up corrupting the
inode on our client if we apply the file attributes without ensuring that
the filehandle matches.
Typical symptoms include spurious "mode changed" reports in the syslog.
We still do want to ensure that we don't invalidate the dentry if the
inode number matches, but we don't have a filehandle.
Fixes: fa9233699c ("NFS: Don't require a filehandle to refresh...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
As described in RFC5661, section 18.46, some of the status flags exist
in order to tell the client when it needs to acknowledge the existence of
revoked state on the server and/or to recover state.
Those flags will then remain set until the recovery procedure is done.
In order to avoid looping, the client therefore needs to ignore
those particular flags while recovering.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This is trivial to do:
- add flags argument to foo_rename()
- check if flags is zero
- assign foo_rename() to .rename2 instead of .rename
This doesn't mean it's impossible to support RENAME_NOREPLACE for these
filesystems, but it is not trivial, like for local filesystems.
RENAME_NOREPLACE must guarantee atomicity (i.e. it shouldn't be possible
for a file to be created on one host while it is overwritten by rename on
another host).
Filesystems converted:
9p, afs, ceph, coda, ecryptfs, kernfs, lustre, ncpfs, nfs, ocfs2, orangefs.
After this, we can get rid of the duplicate interfaces for rename.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Howells <dhowells@redhat.com> [AFS]
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Mark Fasheh <mfasheh@suse.com>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The generic caching code from sunrpc is calling revisit() only once.
The usage pattern of the completion is:
waiter context waker context
do_cache_lookup_wait()
nfs_cache_defer_req_alloc()
init_completion()
do_cache_lookup()
nfs_cache_wait_for_upcall()
wait_for_completion_timeout()
nfs_dns_cache_revisit()
complete()
nfs_cache_defer_req_put()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
nfs_file_direct_write() or nfs_file_direct_read() allocated a request
object via nfs_direct_req_alloc(), which initializes the
completion. The request object then is freed later in the exit path.
Between the initialization and the release either
nfs_direct_write_schedule_iovec() resp
nfs_direct_read_schedule_iovec() are called which will asynchronously
process the request. The calling function waits via nfs_direct_wait()
till the async work has been done. Thus there is only one waiter on
the completion.
nfs_direct_pgio_init() and nfs_direct_read_completion() are passed via
function pointers to nfs pageio. The first function does a ref
counting (get_dreq() and put_dreq()) which ensures that
nfs_direct_read_completion() and nfs_direct_read_schedule_iovec() only
call the completion path once.
The usage pattern of the completion is:
waiter context waker context
nfs_file_direct_write()
dreq = nfs_direct_req_alloc()
init_completion()
nfs_direct_write_schedule_iovec()
nfs_direct_wait()
wait_for_completion_killable()
nfs_direct_write_schedule_work()
nfs_direct_complete()
complete()
nfs_file_direct_read()
dreq = nfs_direct_req_all()
init_completion()
nfs_direct_read_schedule_iovec()
nfs_direct_wait()
wait_for_completion_killable()
nfs_direct_read_schedule_iovec()
nfs_direct_complete()
complete()
nfs_direct_read_completion()
nfs_direct_complete()
complete()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Before we try to stash it in the dcache, we need to at least check
that the filename passed to us by the server is non-empty and doesn't
contain any illegal '\0' or '/' characters.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a waitqueue head to the client structure. Have clients set a wait
on that queue prior to requesting a lock from the server. If the lock
is blocked, then we can use that to wait for wakeups.
Note that we do need to do this "manually" since we need to set the
wait on the waitqueue prior to requesting the lock, but requesting a
lock can involve activities that can block.
However, only do that for NFSv4.1 locks, either by compiling out
all of the waitqueue handling when CONFIG_NFS_V4_1 is disabled, or
skipping all of it at runtime if we're dealing with v4.0, or v4.1
servers that don't send lock callbacks.
Note too that even when we expect to get a lock callback, RFC5661
section 20.11.4 is pretty clear that we still need to poll for them,
so we do still sleep on a timeout. We do however always poll at the
longest interval in that case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
[Anna: nfs4_retry_setlk() "status" should default to -ERESTARTSYS]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This also consolidates the waiting logic into a single function,
instead of having it spread across two like it is now.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to have this info set up before adding the waiter to the
waitqueue, so move this out of the _nfs4_proc_setlk and into the
caller. That's more efficient anyway since we don't need to do
this more than once if we end up waiting on the lock.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For now, the callback doesn't do anything. Support for that will be
added in later patches.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We want to handle the two cases differently, such that we poll more
aggressively when we don't expect a callback.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We actually want to use TASK_INTERRUPTIBLE sleeps when we're in the
process of polling for a NFSv4 lock. If there is a signal pending when
the task wakes up, then we'll be returning an error anyway. So, we might
as well wake up immediately for non-fatal signals as well. That allows
us to return to userland more quickly in that case, but won't change the
error that userland sees.
Also, there is no need to use the *_unsafe sleep variants here, as no
vfs-layer locks should be held at this point.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since it gets passed through to xdr_inline_decode, we might as well
have read_buf expect what it expects -- a size_t.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It will be more clean to use CONFIG_MIGRATION to cover nfs' private
.migratepage in nfs_file_aops like we do in other part of nfs
operations.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, the layout driver selection code always chooses the first one
from the list. That's not really ideal however, as the server can send
the list of layout types in any order that it likes. It's up to the
client to select the best one for its needs.
This patch adds an ordered list of preferred driver types and has the
selection code sort the list of available layout drivers according to it.
Any unrecognized layout type is sorted to the end of the list.
For now, the order of preference is hardcoded, but it should be possible
to make this configurable in the future.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Try all multipath addresses for a data server. The first address that
successfully connects and creates a session is the DS mount address.
All subsequent addresses are tested for session trunking and
added as aliases.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use an async exchange id call to test for session trunking
To conform with RFC 5661 section 18.35.4, the Non-Update on
Existing Clientid case, save the exchange id verifier in
cl_confirm and use it for the session trunking exhange id test.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For session trunking, to compare nfs41_exchange_id_res with
existing nfs_client
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For session trunking, to compare nfs41_exchange_id_res with
exiting nfs_client.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Testing an rpc_xprt for session trunking should not delay application
progress over already established transports.
Setup exchange_id to be able to be an async call to test an rpc_xprt
for session trunking use.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add support for the kernel parameter nfs.callback_nr_threads to set
the number of threads that will be assigned to the callback channel.
Add support for the kernel parameter nfs.nfs.max_session_cb_slots
to set the maximum size of the callback channel slot table.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This will allow us to bump the number of callback threads at will.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the nfs_callback_info[] array correctly tracks the
struct svc_serv.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In order to manage the threads using svc_set_num_threads, we need to
fill in a few extra fields.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current NFSv4.1/pNFS client assumes that MDS supports only one layout
type. While it's true for most existing servers, nevertheless, this can
be change in the near future.
For now, this patch just plumbs in the ability to track a list of
layouts in the fsinfo structure. The existing behavior of the client
is preserved, by having it just select the first entry in the list.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we conform to the algorithm described in RFC5661, section
18.36.4 for when to bump the sequence id. In essence we do it for all
cases except when the RPC call timed out, or in case of the server returning
NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
If there are outstanding LAYOUTGET rpc calls, then we want to ensure that
we keep the layout stateid around so we that don't inadvertently pick up
an old/misordered sequence id.
The race is as follows:
Client Server
====== ======
LAYOUTGET(seqid)
LAYOUTGET(seqid)
return LAYOUTGET(seqid+1)
return LAYOUTGET(seqid+2)
process LAYOUTGET(seqid+2)
forget layout
process LAYOUTGET(seqid+1)
If it forgets the layout stateid before processing seqid+1, then
the client will not check the layout->plh_barrier, and so will set
the stateid with seqid+1.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the server fails to set lrp->res.lrs_present in the LAYOUTRETURN reply,
then that means it believes the client holds no more layout state for that
file, and that the layout stateid is now invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the layout was marked as invalid, we want to ensure to initialise
the layout header fields correctly.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
According to RFC5661, the client is responsible for serialising
LAYOUTGET and LAYOUTRETURN to avoid ambiguity. Consider the case
where we send both in parallel.
Client Server
====== ======
LAYOUTGET(seqid=X)
LAYOUTRETURN(seqid=X)
LAYOUTGET return seqid=X+1
LAYOUTRETURN return seqid=X+2
Process LAYOUTRETURN
Forget layout stateid
Process LAYOUTGET
Set seqid=X+1
The client processes the layoutget/layoutreturn in the wrong order,
and since the result of the layoutreturn was to clear the only
existing layout segment, the client forgets the layout stateid.
When the LAYOUTGET comes in, it is treated as having a completely
new stateid, and so the client sets the wrong sequence id...
Fix is to check if there are outstanding LAYOUTGET requests
before we send the LAYOUTRETURN (note that LAYOUGET will already
wait if it sees an outstanding LAYOUTRETURN).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When doing O_DSYNC writes, the actual write errors are reported through
generic_write_sync(), so we must test the result.
Reported-by: J. R. Okajima <hooanon05g@gmail.com>
Fixes: 18290650b1 ("NFS: Move buffered I/O locking into nfs_file_write()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
On error, the callers expect us to return without bumping
nn->cb_users[].
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.7+
If a server returns itself as a location while migrating, the client may
end up getting stuck attempting to migrate twice to the same server. Catch
this by checking if the nfs_client found is the same as the existing
client. For the other two callers to nfs4_set_client, the nfs_client will
always be ERR_PTR(-EINVAL).
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or
ff_layout_pg_init_write, then we currently end up clearing the layout
segment carried by the struct nfs_pageio_descriptor, causing an Oops
when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist.
The fix is to ensure we return the layout and then retry.
Fixes: 446ca21953 ("pNFS/flexfiles: When initing reads or writes, we...")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Defer freeing the slot until after we have processed the results from
OPEN and LAYOUTGET. This means that the server can rely on the
mechanism in RFC5661 Section 2.10.6.3 to ensure that replies to an
OPEN or LAYOUTGET/RETURN RPC call don't race with the callbacks that
apply to them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For operations like OPEN or LAYOUTGET, which return recallable state
(i.e. delegations and layouts) we want to enable the mechanism for
resolving recall races in RFC5661 Section 2.10.6.3.
To do so, we will want to defer bumping the slot's sequence number until
we have finished processing the RPC results.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If CB_SEQUENCE tells us that the processing of this request depends on
the completion of one or more referring triples (see RFC 5661 Section
2.10.6.3), delay the callback processing until after the RPC requests
being referred to have completed.
If we end up delaying for more than 1/2 second, then fall back to
returning NFS4ERR_DELAY in reply to the callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The slot table hasn't been an array since v3.7. Ensure that we
use nfs4_lookup_slot() to access the slot correctly.
Fixes: 87dda67e73 ("NFSv4.1: Allow SEQUENCE to resize the slot table...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.8+
Block/SCSI layout write completion may add committable extents to the
extent tree before updating the layout's last-written byte under the inode
lock. If a sync happens before this value is updated, then
prepare_layoutcommit may find and encode these extents which would produce
a LAYOUTCOMMIT request whose encoded extents are larger than the request's
loca_length.
Fix this by using a last-written byte value that is updated atomically with
the extent tree so that commitable extents always match.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that the client conforms to the normative behaviour described in
RFC5661 Section 12.7.2: "If a client believes its lease has expired,
it MUST NOT send I/O to the storage device until it has validated its
lease."
So ensure that we wait for the lease to be validated before using
the layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.20+
Prior to this patch, the retrans value was set at 5, meaning that we
could see a maximum retransmission timeout value of more than 6 minutes.
That's a tad high for NFSv3 where the protocol does allow the server to
drop requests at any time.
Since this is a data channel, let's just set retrans to 0, and the default
timeout to 60s. The user can continue to adjust these defaults using the
dataserver_retrans and dataserver_timeo module parameters.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should allow retrans=0 as just meaning that every timeout is a major
timeout, and that there is no increment in the timeout value.
For instance, this means that we would allow TCP users to specify a
flat timeout value of 60s, by specifying "timeo=600,retrans=0" in their
mount option string.
Siged-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Putting the periodicity timer in the mirror instances is causing
non-scalable reporting behaviour and missed reporting intervals.
When you recall layouts and/or implement client side mirroring, it
leads to consecutive reports with only a few ms between RPC calls.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: d0379a5d06 ("pNFS/flexfiles: Support server-supplied...")
Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs
multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of SO_REUSEPORT,
and that prevented the use of multiple different NFS versions to the
same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UHph
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user
needs multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of
SO_REUSEPORT, and that prevented the use of multiple different NFS
versions to the same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses"
* tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Cap the transport reconnection timer at 1/2 lease period
NFSv4: Cleanup the setting of the nfs4 lease period
SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout
SUNRPC: Fix reconnection timeouts
NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED
SUNRPC: disable the use of IPv6 temporary addresses.
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Fix up socket autodisconnect
SUNRPC: Handle EADDRNOTAVAIL on connection failures
Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
qstr * as an argument when const struct qstr * would suffice; it
complicates analysis for no good reason.
I'd prefer to feed that separately from the assorted fixes (those are
in #for-linus and with somewhat trickier topology)"
* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qstr: constify instances in adfs
qstr: constify instances in lustre
qstr: constify instances in f2fs
qstr: constify instances in ext2
qstr: constify instances in vfat
qstr: constify instances in procfs
qstr: constify instances in fuse
qstr constify instances in fs/dcache.c
qstr: constify instances in nfs
qstr: constify instances in ocfs2
qstr: constify instances in autofs4
qstr: constify instances in hfs
qstr: constify instances in hfsplus
qstr: constify instances in logfs
qstr: constify dentry_init_security
We don't want to miss a lease period renewal due to the TCP connection
failing to reconnect in a timely fashion. To ensure this doesn't happen,
cap the reconnection timer so that we retry the connection attempt
at least every 1/2 lease period.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Make a helper function nfs4_set_lease_period() and have
nfs41_setup_state_renewal() and nfs4_do_fsinfo() use it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should handle those errors in the same way we handle the other
stateid errors: by invalidating the faulty layout stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- Several LAYOUTGET bugfixes
Features:
- Several performance related features
- More aggressive caching when we can rely on close-to-open cache
consistency
- Remove serialisation of O_DIRECT reads and writes
- Optimise several code paths to not flush to disk unnecessarily. However
allow for the idiosyncracies of pNFS for those layout types that need
to issue a LAYOUTCOMMIT before the metadata can be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when the generic NFS
mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data integrity or
privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as it has potential
security holes.
- Several layout recall fixes to improve NFSv4.1 protocol compliance.
- Fix an Oops in the pNFS files and flexfiles connection setup to the DS
- Allow retry of operations that used a returned delegation stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is outstanding
- Fix writeback races in nfs4_copy_range() and nfs42_proc_deallocate()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WNyE
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- several LAYOUTGET bugfixes
Features:
- several performance related features
- more aggressive caching when we can rely on close-to-open
cache consistency
- remove serialisation of O_DIRECT reads and writes
- optimise several code paths to not flush to disk unnecessarily.
However allow for the idiosyncracies of pNFS for those layout
types that need to issue a LAYOUTCOMMIT before the metadata can
be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when
the generic NFS mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data
integrity or privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as
it has potential security holes.
- Several layout recall fixes to improve NFSv4.1 protocol
compliance.
- Fix an Oops in the pNFS files and flexfiles connection
setup to the DS
- Allow retry of operations that used a returned delegation
stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is
outstanding
- Fix writeback races in nfs4_copy_range() and
nfs42_proc_deallocate()"
* tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits)
pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding
NFSv4: Clean up lookup of SECINFO_NO_NAME
NFSv4.2: Fix warning "variable ‘stateids’ set but not used"
NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’"
SUNRPC: Fix a compiler warning in fs/nfs/clnt.c
pNFS: Remove redundant smp_mb() from pnfs_init_lseg()
pNFS: Cleanup - do layout segment initialisation in one place
pNFS: Remove redundant stateid invalidation
pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()
pNFS: Clear the layout metadata if the server changed the layout stateid
pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()
NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id
pNFS: Do not set plh_return_seq for non-callback related layoutreturns
pNFS: Ensure layoutreturn acts as a completion for layout callbacks
pNFS: Fix CB_LAYOUTRECALL stateid verification
pNFS: Always update the layout barrier seqid on LAYOUTGET
pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set
pNFS: Clear the layout return tracking on layout reinitialisation
pNFS: LAYOUTRETURN should only update the stateid if the layout is valid
nfs: don't create zero-length requests
...
changes are:
. The function pid code uses the event pid filtering logic
. [ku]probe events have access to current->comm
. trace_printk now has sample code
. PCI devices now trace physical addresses
. stack tracing has less unnessary functions traced
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXl+d2AAoJEKKk/i67LK/83QEH/RDJ0mcfFVsuEeOnZZrZXABm
4Rxk4FE5UAD+TSrVycwwzcbQab1iPK63mMdYvIBvaOiIC6/OJaEVM7jzZxnNGqmr
pj0H8bxwOr58pe5pfnP92ow5qTLLzsXraWNl5sRXhSSHON7CXpGVzkErB58GmMYd
8p6d9ziifQjo8X2O6XC9rGAvYLY5kEkVvyfuE1hI7muNTeOjyOT4EqpkNzxdBk+I
QkGZGsk3Xhc8II9nu8FPWkaD26TatGJoZtZmVWHOzfsb3HNzG4RXla+WVOQ5u1HV
noVyB1CJHhkO5CEBPdYIqwBWPQU4B9HfG4gVcUpDDVRxfzMpnEcKi1uwe+uDjfs=
=XFcv
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This is mostly clean ups and small fixes. Some of the more visible
changes are:
- The function pid code uses the event pid filtering logic
- [ku]probe events have access to current->comm
- trace_printk now has sample code
- PCI devices now trace physical addresses
- stack tracing has less unnessary functions traced"
* tag 'trace-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk, tracing: Avoiding unneeded blank lines
tracing: Use __get_str() when manipulating strings
tracing, RAS: Cleanup on __get_str() usage
tracing: Use outer () on __get_str() definition
ftrace: Reduce size of function graph entries
tracing: Have HIST_TRIGGERS select TRACING
tracing: Using for_each_set_bit() to simplify trace_pid_write()
ftrace: Move toplevel init out of ftrace_init_tracefs()
tracing/function_graph: Fix filters for function_graph threshold
tracing: Skip more functions when doing stack tracing of events
tracing: Expose CPU physical addresses (resource values) for PCI devices
tracing: Show the preempt count of when the event was called
tracing: Add trace_printk sample code
tracing: Choose static tp_printk buffer by explicit nesting count
tracing: expose current->comm to [ku]probe events
ftrace: Have set_ftrace_pid use the bitmap like events do
tracing: Move pid_list write processing into its own function
tracing: Move the pid_list seq_file functions to be global
tracing: Move filtered_pid helper functions into trace.c
tracing: Make the pid filtering helper functions global
Merge more updates from Andrew Morton:
"The rest of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (101 commits)
mm, compaction: simplify contended compaction handling
mm, compaction: introduce direct compaction priority
mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations
mm, page_alloc: make THP-specific decisions more generic
mm, page_alloc: restructure direct compaction handling in slowpath
mm, page_alloc: don't retry initial attempt in slowpath
mm, page_alloc: set alloc_flags only once in slowpath
lib/stackdepot.c: use __GFP_NOWARN for stack allocations
mm, kasan: switch SLUB to stackdepot, enable memory quarantine for SLUB
mm, kasan: account for object redzone in SLUB's nearest_obj()
mm: fix use-after-free if memory allocation failed in vma_adjust()
zsmalloc: Delete an unnecessary check before the function call "iput"
mm/memblock.c: fix index adjustment error in __next_mem_range_rev()
mem-hotplug: alloc new page from a nearest neighbor node when mem-offline
mm: optimize copy_page_to/from_iter_iovec
mm: add cond_resched() to generic_swapfile_activate()
Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements"
mm, compaction: don't isolate PageWriteback pages in MIGRATE_SYNC_LIGHT mode
mm: hwpoison: remove incorrect comments
make __section_nr() more efficient
...
There are now a number of accounting oddities such as mapped file pages
being accounted for on the node while the total number of file pages are
accounted on the zone. This can be coped with to some extent but it's
confusing so this patch moves the relevant file-based accounted. Due to
throttling logic in the page allocator for reliable OOM detection, it is
still necessary to track dirty and writeback pages on a per-zone basis.
[mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting]
Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
"Assorted cleanups and fixes.
Probably the most interesting part long-term is ->d_init() - that will
have a bunch of followups in (at least) ceph and lustre, but we'll
need to sort the barrier-related rules before it can get used for
really non-trivial stuff.
Another fun thing is the merge of ->d_iput() callers (dentry_iput()
and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
except the one in __d_lookup_lru())"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
fs/dcache.c: avoid soft-lockup in dput()
vfs: new d_init method
vfs: Update lookup_dcache() comment
bdev: get rid of ->bd_inodes
Remove last traces of ->sync_page
new helper: d_same_name()
dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
vfs: clean up documentation
vfs: document ->d_real()
vfs: merge .d_select_inode() into .d_real()
unify dentry_iput() and dentry_unlink_inode()
binfmt_misc: ->s_root is not going anywhere
drop redundant ->owner initializations
ufs: get rid of redundant checks
orangefs: constify inode_operations
missed comment updates from ->direct_IO() prototype change
file_inode(f)->i_mapping is f->f_mapping
trim fsnotify hooks a bit
9p: new helper - v9fs_parent_fid()
debugfs: ->d_parent is never NULL or negative
...
This changes the vfs dentry hashing to mix in the parent pointer at the
_beginning_ of the hash, rather than at the end.
That actually improves both the hash and the code generation, because we
can move more of the computation to the "static" part of the dcache
setup, and do less at lookup runtime.
It turns out that a lot of other hash users also really wanted to mix in
a base pointer as a 'salt' for the hash, and so the slightly extended
interface ends up working well for other cases too.
Users that want a string hash that is purely about the string pass in a
'salt' pointer of NULL.
* merge branch 'salted-string-hash':
fs/dcache.c: Save one 32-bit multiply in dcache lookup
vfs: make the string hashes salt the hash
A LAYOUTCOMMIT then subsequent GETATTR may both return the same attributes,
and in that case NFS_INO_INVALID_ATTR is never set on the second pass
through nfs_update_inode(). The existing check to skip the clearing of
NFS_INO_INVALID_ATTR if a LAYOUTCOMMIT is outstanding does not help in this
case (see commit 10b7e9ad44: "pNFS: Don't mark the inode as revalidated
if a LAYOUTCOMMIT is outstanding"). We know that if a LAYOUTCOMMIT is
outstanding then attributes will need upating, so always set
NFS_INO_INVALID_ATTR.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
Use the minor version ops cached in struct nfs_client instead of looking
them up again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Replace it with a test for whether or not the sent a stateid in violation
of what we asked for.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
...instead of splitting the initialisation over init_lseg() and
pnfs_layout_process().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the server changed the layout stateid's "other" field, then
we should treat the old layout as being completely gone. In that
case, we want to clear the metadata such as scheduled layoutreturns.
Do this by calling pnfs_mark_layout_stateid_invalid().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When determining which layout segments to return, we do want
pnfs_mark_matching_lsegs_return to check that they match the layout
sequence id. This ensures that we don't waste time if the server
is replaying a layout recall that has already been satisfied.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In cases where we need to send a layoutreturn in order to propagate
an error, we should not tie that to a specific layout stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we return NFS_OK to the CB_LAYOUTRECALL, we are required to
send a layoutreturn that "completes" that layout recall request, using
the correct stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to evaluate in this order:
If the client holds no layout for this inode, then return
NFS4ERR_NOMATCHING_LAYOUT; it probably forgot the layout.
If the client finds the inode among the list of layouts, but the corresponding
stateid has not yet been initialised, then return NFS4ERR_DELAY to ask the
server to retry once the outstanding LAYOUTGET is complete.
If the current layout stateid's "other" field does not match the recalled
stateid, return NFS4ERR_BAD_STATEID.
If already processing a layout recall with a newer stateid, return
NFS4ERR_OLD_STATEID. This can only happens for servers that are
non-compliant with the NFSv4.1 protocol.
If already processing a layout recall with an older stateid, return
NFS4ERR_DELAY to ask the server to retry once the outstanding
LAYOUTRETURN is complete. Again, this is technically incompliant with
the NFSv4.1 protocol.
If the current layout sequence id is newer than the recalled stateid's
sequence id, return NFS4ERR_OLD_STATEID. This too implies protocol
non-compliance.
If the current layout sequence id is older than the recalled stateid's
sequence id+1, return NFS4ERR_DELAY.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, pnfs_set_layout_stateid() will update the layout sequence
id barrier only if the stateid itself is newer than the current
layout stateid. However in a situation where multiple LAYOUTGET calls
and a LAYOUTRETURN raced, it is entirely possible for one of the
LAYOUTGET to set the current stateid to something newer than the
LAYOUTRETURN that needs to set the barrier.
The fix is to allow the "update_barrier" flag to force a check as to
whether or not the barrier needs to be updated.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the layout stateid is invalid, then pnfs_set_layout_stateid() must
always initialise it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that we don't carry over layoutreturn info from a previous
incarnation of this layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS doesn't expect requests with wb_bytes set to zero and may make
unexpected decisions about how to handle that request at the page IO layer.
Skip request creation if we won't have any wb_bytes in the request.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When bl_parse_deviceid() fails in bl_alloc_deviceid_node() on
blkdev_get_by_*() step we get an pnfs_block_dev struct that is
uninitialized except for bdev field which is set to whatever error
blkdev_get_by_*() returns. bl_free_device() then tries to call
blkdev_put() if bdev is not 0 resulting in a wrong pointer dereference.
Fixing this by setting bdev in struct pnfs_block_dev only if we didn't
get an error from blkdev_get_by_*().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
All write callbacks are required to call nfs_writeback_update_inode() upon
success to ensure that file size changes are recorded, and the attribute
cache is invalidated.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The last put of deviceid nodes for SCSI layouts may sleep, so we shouldn't
hold any spinlocks. Make sure we put them outside the bl_ext_lock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.
This can be reproduced as follows:
1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server. Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys
2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m
3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set. Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
5. Now do some I/O to the sec=sys mount. This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1
6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client. Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect. Grabbing a new kerberos ticket at this
point will have no effect either.
Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags. Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too. Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When older servers return RPC_AUTH_NULL, it means the
rpc creds will be ignored. In that case use the sec=
that was specified instead of setting sec=null
Fixes Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1112983
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to recover the open stateid if there is no layout stateid
and/or the stateid argument matches an open stateid.
Otherwise throw out the existing layout and recover from scratch, as
the layout stateid is bad.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Instead of giving up altogether and falling back to doing I/O
through the MDS, which may make the situation worse, wait for
2 lease periods for the callback to resolve itself, and then
try destroying the existing layout.
Only if this was an attempt at getting a first layout, do we
give up altogether, as the server is clearly crazy.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
They are not the same error, and need to be handled differently.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
The non-retry error path is currently broken and ends up releasing the
reference to the layout twice. It also can end up clearing the
NFS_LAYOUT_FIRST_LAYOUTGET flag twice, causing a race.
In addition, the retry path will fail to decrement the plh_outstanding
counter.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
We know that the attributes will need updating if there is still a
LAYOUTCOMMIT outstanding.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use __get_str(str) rather than __get_dynamic_array(str) when
deadling with strings.
It is just a code cleanup, no changes on tracepoint ABI.
Link: http://lkml.kernel.org/r/ea260df91817411cca2a1f3db2abd88860094788.1467407618.git.bristot@redhat.com
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-nfs@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Avoid a bad nfs server return an unaligned length of signature.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of reusing the wwn-* names for multipath devices nodes RHEL and
Fedora introduce new dm-mpath-uuid-* nodes with a slightly different
naming scheme. Try these names first to ensure we always get a
multipath-capable device if it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current code works with the standard udev/systemd names, but we'll have
to add another method in the next patch. Refactor it into a separate helper
to make room for the new variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This was fixed for the original block layout code a while ago, but also
needs to be fixed for the SCSI layout path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We're not holding any locks, so both nfs_wb_all() and inode_dio_wait()
are unenforcible and have livelock potential. Just limit ourselves to
flushing out the data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Before commit 778be232a2 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.
Fixes: 778be232a2 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We want to ensure that we write the cached data to the server, but
don't require it be synced to disk. If the server reboots, we will
get a stateid error, which will cause us to retry anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to ensure that any writes to the destination file are serialised
with the copy, meaning that the writeback has to occur under the inode lock.
Also relax the writeback requirement on the source, and rely on the
stateid checking to tell us if the source rebooted. Add the helper
nfs_filemap_write_and_wait_range() to call pnfs_sync_inode() as
is appropriate for pNFS servers that may need a layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When punching holes in a file, we want to ensure the operation is
serialised w.r.t. other writes, meaning that we want to call
nfs_sync_inode() while holding the inode lock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When retrieving stat() information, NFS unfortunately does require us to
sync writes to disk in order to ensure that mtime and ctime are up to
date. However we shouldn't have to ensure that those writes are persisted.
Relaxing that requirement does mean that we may see an mtime/ctime change
if the server reboots and forces us to replay all writes.
The exception to this rule are pNFS clients that are required to send
layoutcommit, however that is dealt with by the call to pnfs_sync_inode()
in _nfs_revalidate_inode().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A file that is open for O_DIRECT is by definition not obeying
close-to-open cache consistency semantics, so let's not cache
the attributes too aggressively either.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We're now waiting immediately after taking the locks, so waiting
in fsync() and write_begin() is either redundant or potentially
subject to livelock (if not holding the lock).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is only one caller that sets the "write" argument to true,
so just move the call to nfs_zap_mapping() and get rid of the
now redundant argument.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Allow dio requests to be scheduled in parallel, but ensuring that they
do not conflict with buffered I/O.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
On success, the RPC callbacks will ensure that we make the appropriate calls
to nfs_writeback_update_inode()
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should not be interested in looking at the value of the stable field,
since that could take any value.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we need to update the cached attributes, then we'd better make
sure that we also layoutcommit first. Otherwise, the server may have stale
attributes.
Prior to this patch, the revalidation code tried to "fix" this problem by
simply disabling attributes that would be affected by the layoutcommit.
That approach breaks nfs_writeback_check_extend(), leading to a file size
corruption.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
So ensure that we mark the layout for commit once the write is done,
and then ensure that the commit to ds is finished before sending
layoutcommit.
Note that by doing this, we're able to optimise away the commit
for the case of servers that don't need layoutcommit in order to
return updated attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up nfs4_do_handle_exception() so that it can check if the operation
that received the NFS4ERR_BAD_STATEID was using a defunct delegation.
Apply that to the case of SETATTR, which will currently return EIO
in some cases where this happens.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If a pNFS client sets hdr->pgio_done_cb, then we should not overwrite that
in nfs4_proc_read_setup()
Fixes: 75bf47ebf6 ("pNFS/flexfile: Fix erroneous fall back to...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Olga Kornievskaia reports that the following test fails to trigger
an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE.
fd0 = open(foo, RDRW) -- should be open on the wire for "both"
fd1 = open(foo, RDONLY) -- should be open on the wire for "read"
close(fd0) -- should trigger an open_downgrade
read(fd1)
close(fd1)
The issue is that we're missing a check for whether or not the current
state transitioned from an O_RDWR state as opposed to having transitioned
from a combination of O_RDONLY and O_WRONLY.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: cd9288ffae ("NFSv4: Fix another bug in the close/open_downgrade code")
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code"
unconditional d_drop() after the ->open_context() had been removed. It had
been correct for success cases (there ->open_context() itself had been doing
dcache manipulations), but not for error ones. Only one of those (ENOENT)
got a compensatory d_drop() added in that commit, but in fact it should've
been done for all errors. As it is, the case of O_CREAT non-exclusive open
on a hashed negative dentry racing with e.g. symlink creation from another
client ended up with ->open_context() getting an error and proceeding to
call nfs_lookup(). On a hashed dentry, which would've instantly triggered
BUG_ON() in d_materialise_unique() (or, these days, its equivalent in
d_splice_alias()).
Cc: stable@vger.kernel.org # v3.10+
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we don't set the mode correctly in nfs_init_locked(), then there is
potential for a race with a second call to nfs_fhget that will cause
inode aliasing.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
According to RFC5661, section 12.5.3. the layout stateid is no longer
valid once the client no longer holds any layout segments. Ensure that
we mark it invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 0bcbf039f6, nfs_readpage_release() has been used to
unlock the page in the read code.
Fixes: 0bcbf039f6 ("nfs: handle request add failure properly")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
pnfs_generic_commit_cancel_empty_pagelist calls nfs_commitdata_release,
but that is wrong: nfs_commitdata_release puts the open context, something
that isn't valid until nfs_init_commit is called, which is never the case
when pnfs_generic_commit_cancel_empty_pagelist is called.
This was introduced in "nfs: avoid race that crashes nfs_init_commit".
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
if we read or wrote something, we must report it
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We must call nfs4_handle_exception() on BAD_STATEID errors. The only
exception is if the stateid argument turns out to be a layout stateid
that is declared invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs4_handle_exception() relies on the caller setting the 'inode' field
in the struct nfs4_exception argument when the error applies to a
delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While COMMIT has the potential to free up a lot of memory that is being
taken by unstable writes, it isn't guaranteed to free up this particular
page. Also, calling fsync() on the server is expensive and so we want to
do it in a more controlled fashion, rather than have it triggered at
random by the VM.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Unless the user is using file locking, we must assume close-to-open
cache consistency when the file is open for writing. Adjust the
caching algorithm so that it does not clear the cache on out-of-order
writes and/or attribute revalidations.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If an attribute revalidation fails, then we already know that we'll
zap the access cache. If, OTOH, the inode isn't changing, there should
be no need to eject access calls just because they are old.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If there were outstanding writes then chalk up the unexpected change
attribute on the server to them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We always mixed in the parent pointer into the dentry name hash, but we
did it late at lookup time. It turns out that we can simplify that
lookup-time action by salting the hash with the parent pointer early
instead of late.
A few other users of our string hashes also wanted to mix in their own
pointers into the hash, and those are updated to use the same mechanism.
Hash users that don't have any particular initial salt can just use the
NULL pointer as a no-salt.
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Older versions of gcc don't understand named initializers inside a
anonymous structure or union member. It can be worked around by adding
the bracin gin the initializer for the anonymous member.
Without this, gcc 4.4.4 will fail the build with
CC fs/nfs/nfs4state.o
fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer
fs/nfs/nfs4state.c:69: warning: missing braces around initializer
fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’)
make[2]: *** [fs/nfs/nfs4state.o] Error 1
introduced in commit 93b717fd81 ("NFSv4: Label stateids with the type")
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Anna Schumaker <Anna.Schumaker@netapp.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QMmY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and
write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client
has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call"
* tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (61 commits)
pnfs: pnfs_update_layout needs to consider if strict iomode checking is on
nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and reading is disabled
nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IO
nfs: avoid race that crashes nfs_init_commit
NFS: checking for NULL instead of IS_ERR() in nfs_commit_file()
pnfs: make pnfs_layout_process more robust
pnfs: rework LAYOUTGET retry handling
pnfs: lift retry logic from send_layoutget to pnfs_update_layout
pnfs: fix bad error handling in send_layoutget
flexfiles: add kerneldoc header to nfs4_ff_layout_prepare_ds
flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTED
pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args
pnfs: keep track of the return sequence number in pnfs_layout_hdr
pnfs: record sequence in pnfs_layout_segment when it's created
pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit set
pNFS/flexfiles: When initing reads or writes, we might have to retry connecting to DSes
pNFS/flexfiles: When checking for available DSes, conditionally check for MDS io
pNFS/flexfile: Fix erroneous fall back to read/write through the MDS
NFS: Reclaim writes via writepage are opportunistic
NFSv4: Use the right stateid for delegations in setattr, read and write
...
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The mds can inform the client not to use the IOMODE_RW layout
segment for doing READs. I.e., it is basically a
IOMODE_WRITE layout segment.
It would do this to not interfere with the WRITEs.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull security subsystem updates from James Morris:
"Highlights:
- A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
of modules and firmware to be loaded from a specific device (this
is from ChromeOS, where the device as a whole is verified
cryptographically via dm-verity).
This is disabled by default but can be configured to be enabled by
default (don't do this if you don't know what you're doing).
- Keys: allow authentication data to be stored in an asymmetric key.
Lots of general fixes and updates.
- SELinux: add restrictions for loading of kernel modules via
finit_module(). Distinguish non-init user namespace capability
checks. Apply execstack check on thread stacks"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
LSM: LoadPin: provide enablement CONFIG
Yama: use atomic allocations when reporting
seccomp: Fix comment typo
ima: add support for creating files using the mknodat syscall
ima: fix ima_inode_post_setattr
vfs: forbid write access when reading a file into memory
fs: fix over-zealous use of "const"
selinux: apply execstack check on thread stacks
selinux: distinguish non-init user namespace capability checks
LSM: LoadPin for kernel file loading restrictions
fs: define a string representation of the kernel_read_file_id enumeration
Yama: consolidate error reporting
string_helpers: add kstrdup_quotable_file
string_helpers: add kstrdup_quotable_cmdline
string_helpers: add kstrdup_quotable
selinux: check ss_initialized before revalidating an inode label
selinux: delay inode label lookup as long as possible
selinux: don't revalidate an inode's label when explicitly setting it
selinux: Change bool variable name to index.
KEYS: Add KEYCTL_DH_COMPUTE command
...
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
It can return NULL if layoutgets are blocked currently. Fix it to return
-EAGAIN in that case, so we can properly handle it in pnfs_update_layout.
Also, clean up and simplify the error handling -- eliminate "status" and
just use "lseg".
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are several problems in the way a stateid is selected for a
LAYOUTGET operation:
We pick a stateid to use in the RPC prepare op, but that makes
it difficult to serialize LAYOUTGETs that use the open stateid. That
serialization is done in pnfs_update_layout, which occurs well before
the rpc_prepare operation.
Between those two events, the i_lock is dropped and reacquired.
pnfs_update_layout can find that the list has lsegs in it and not do any
serialization, but then later pnfs_choose_layoutget_stateid ends up
choosing the open stateid.
This patch changes the client to select the stateid to use in the
LAYOUTGET earlier, when we're searching for a usable layout segment.
This way we can do it all while holding the i_lock the first time, and
ensure that we serialize any LAYOUTGET call that uses a non-layout
stateid.
This also means a rework of how LAYOUTGET replies are handled, as we
must now get the latest stateid if we want to retransmit in response
to a retryable error.
Most of those errors boil down to the fact that the layout state has
changed in some fashion. Thus, what we really want to do is to re-search
for a layout when it fails with a retryable error, so that we can avoid
reissuing the RPC at all if possible.
While the LAYOUTGET RPC is async, the initiating thread always waits for
it to complete, so it's effectively synchronous anyway. Currently, when
we need to retry a LAYOUTGET because of an error, we drive that retry
via the rpc state machine.
This means that once the call has been submitted, it runs until it
completes. So, we must move the error handling for this RPC out of the
rpc_call_done operation and into the caller.
In order to handle errors like NFS4ERR_DELAY properly, we must also
pass a pointer to the sliding timeout, which is now moved to the stack
in pnfs_update_layout.
The complicating errors are -NFS4ERR_RECALLCONFLICT and
-NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give
up and return NULL back to the caller. So, there is some special
handling for those errors to ensure that the layers driving the retries
can handle that appropriately.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we get back something like NFS4ERR_OLD_STATEID, that will be
translated into -EAGAIN, and the do/while loop in send_layoutget
will drive the call again.
This is not quite what we want, I think. An error like that is a
sign that something has changed. That something could have been a
concurrent LAYOUTGET that would give us a usable lseg.
Lift the retry logic into pnfs_update_layout instead. That allows
us to redo the layout search, and may spare us from having to issue
an RPC.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, the code will clear the fail bit if we get back a fatal
error. I don't think that's correct -- we want to clear that bit
if we do not get a fatal error.
Fixes: 0bcbf039f6 (nfs: handle request add failure properly)
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Setting just the NFS_LAYOUT_RETURN_REQUESTED flag doesn't do anything,
unless there are lsegs that are also being marked for return. At the
point where that happens this flag is also set, so these set_bit calls
don't do anything useful.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
LAYOUTRETURN is "special" in that servers and clients are expected to
work with old stateids. When the client sends a LAYOUTRETURN with an old
stateid in it then the server is expected to only tear down layout
segments that were present when that seqid was current. Ensure that the
client handles its accounting accordingly.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we want to selectively do a LAYOUTRETURN, we need to specify a
stateid that represents most recent layout acquisition that is to be
returned.
When we mark a layout stateid to be returned, we update the return
sequence number in the layout header with that value, if it's newer
than the existing one. Then, when we go to do a LAYOUTRETURN on
layout header put, we overwrite the seqid in the stateid with the
saved one, and then zero it out.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In later patches, we're going to teach the client to be more selective
about how it returns layouts. This means keeping a record of what the
stateid's seqid was at the time that the server handed out a layout
segment.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Otherwise, we'll end up returning layouts that we've just received if
the client issues a new LAYOUTGET prior to the LAYOUTRETURN.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we are initializing reads or writes and can not connect to a DS, then
check whether or not IO is allowed through the MDS. If it is allowed,
reset to the MDS. Else, fail the layout segment and force a retry
of a new layout segment.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Whenever we check to see if we have the needed number of DSes for the
action, we may also have to check to see whether IO is allowed to go to
the MDS or not.
[jlayton: fix merge conflict due to lack of localio patches here]
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch fixes a problem whereby the pNFS client falls back to doing
reads and writes through the metadata server even when the layout flag
FF_FLAGS_NO_IO_THRU_MDS is set.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need to make them a priority any more, or to make them succeed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we're using a delegation to represent our open state, we should
ensure that we use the stateid that was used to create that delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In order to more easily distinguish what kind of stateid we are dealing
with, introduce a type that can be used to label the stateid structure.
The label will be useful both for debugging, but also when dealing with
operations like SETATTR, READ and WRITE that can take several different
types of stateid as arguments.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RPC-over-RDMA transports have a limit on how large a backward
direction (backchannel) RPC message can be. Ensure that the NFSv4.x
CREATE_SESSION operation advertises this limit to servers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RFC 5666: The "rdma" netid is to be used when IPv4 addressing
is employed by the underlying transport, and "rdma6" for IPv6
addressing.
Add mount -o proto=rdma6 option to support NFS/RDMA IPv6 addressing.
Changes from v2:
- Integrated comments from Chuck Level, Anna Schumaker, Trodt Myklebust
- Add a little more to the patch description to describe NFS/RDMA
IPv6 suggested by Chuck Level and Anna Schumaker
- Removed duplicated rdma6 define
- Remove Opt_xprt_rdma mountfamily since it doesn't support
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
OPEN_CREATE with EXCLUSIVE4_1 sends initial file permission.
Ignoring fact, that server have indicated that file mod is set, client
will send yet another SETATTR request, but, as mode is already set,
new SETATTR will be empty. This is not a problem, nevertheless
an extra roundtrip and slow open on high latency networks.
This change is aims to skip extra setattr after open if there are
no attributes to be set.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This adds the copy_range file_ops function pointer used by the
sys_copy_range() function call. This patch only implements sync copies,
so if an async copy happens we decode the stateid and ignore it.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
Copy will use this to set up a commit request for a generic range. I
don't want to allocate a new pagecache entry for the file, so I needed
to change parts of the commit path to handle requests with a null
wb_page.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
use d_alloc_parallel() for sillyunlink/lookup exclusion and
explicit rwsem (nfs_rmdir() being a writer and nfs_call_unlink() -
a reader) for rmdir/sillyunlink one.
That ought to make lookup/readdir/!O_CREAT atomic_open really
parallel on NFS.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There's no guarantee that an IP address in a different network namespace
actually represents the same endpoint.
Also, if we allow unprivileged nfs mounts some day then this might allow
an unprivileged user in another network namespace to misdirect somebody
else's nfs mounts.
If sharing between containers is really what's wanted then that could
still be arranged explicitly, for example with bind mounts.
Reported-by: "Eric W. Biederman" <ebiederm@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
At Connectathon 2016, we found that recent upstream Linux clients
would occasionally send a LOCK operation with a zero stateid. This
appeared to happen in close proximity to another thread returning
a delegation before unlinking the same file while it remained open.
Earlier, the client received a write delegation on this file and
returned the open stateid. Now, as it is getting ready to unlink the
file, it returns the write delegation. But there is still an open
file descriptor on that file, so the client must OPEN the file
again before it returns the delegation.
Since commit 24311f8841 ('NFSv4: Recovery of recalled read
delegations is broken'), nfs_open_delegation_recall() clears the
NFS_DELEGATED_STATE flag _before_ it sends the OPEN. This allows a
racing LOCK on the same inode to be put on the wire before the OPEN
operation has returned a valid open stateid.
To eliminate this race, serialize delegation return with the
acquisition of a file lock on the same file. Adopt the same approach
as is used in the unlock path.
This patch also eliminates a similar race seen when sending a LOCK
operation at the same time as returning a delegation on the same file.
Fixes: 24311f8841 ('NFSv4: Recovery of recalled read ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Anna: Add sentence about LOCK / delegation race]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A mirror can be shared between multiple layouts, even with different
iomodes. That makes stats gathering simpler, but it causes a problem
when we get different creds in READ vs. RW layouts.
The current code drops the newer credentials onto the floor when this
occurs. That's problematic when you fetch a READ layout first, and then
a RW. If the READ layout doesn't have the correct creds to do a write,
then writes will fail.
We could just overwrite the READ credentials with the RW ones, but that
would break the ability for the server to fence the layout for reads if
things go awry. We need to be able to revert to the earlier READ creds
if the RW layout is returned afterward.
The simplest fix is to just keep two sets of creds per mirror. One for
READ layouts and one for RW, and then use the appropriate set depending
on the iomode of the layout segment.
Also fix up some RCU nits that sparse found.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We're just as likely to have allocation problems here as we would if we
delay looking up the credential like we currently do. Fix the code to
get a rpc_cred reference early, as soon as the mirror is set up.
This allows us to eliminate the mirror early if there is a problem
getting an rpc credential. This also allows us to drop the uid/gid
from the layout_mirror struct as well.
In the event that we find an existing mirror where this one would go, we
swap in the new creds unconditionally, and drop the reference to the old
one.
Note that the old ff_layout_update_mirror_cred function wouldn't set
this pointer unless the DS version was 3, but we don't know what the DS
version is at this point. I'm a little unclear on why it did that as you
still need creds to talk to v4 servers as well. I have the code set
it regardless of the DS version here.
Also note the change to using generic creds instead of calling
lookup_cred directly. With that change, we also need to populate the
group_info pointer in the acred as some functions expect that to never
be NULL. Instead of allocating one every time however, we can allocate
one when the module is loaded and share it since the group_info is
refcounted.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In later patches, we're going to want to allow the creds to be updated
when we get a new layout with updated creds. Have this function take
a reference to the cred that is later put once the call has been
dispatched.
Also, prepare for this change by ensuring we follow RCU rules when
getting a reference to the cred as well.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
