Commit graph

9 commits

Author SHA1 Message Date
Andy Lutomirski 1ad83c858c x86_64,vsyscall: Make vsyscall emulation configurable
This adds CONFIG_X86_VSYSCALL_EMULATION, guarded by CONFIG_EXPERT.
Turning it off completely disables vsyscall emulation, saving ~3.5k
for vsyscall_64.c, 4k for vsyscall_emu_64.S (the fake vsyscall
page), some tiny amount of core mm code that supports a gate area,
and possibly 4k for a wasted pagetable.  The latter is because the
vsyscall addresses are misaligned and fit poorly in the fixmap.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/406db88b8dd5f0cbbf38216d11be34bbb43c7eae.1414618407.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-03 21:44:57 +01:00
Andy Lutomirski a6c19dfe39 arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).

This default is only useful for ia64.  arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it.  arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.

This gets rid of the default and moves the code into ia64.

This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:27 -07:00
Alexander Duyck 7d74275d39 x86: Make it so that __pa_symbol can only process kernel symbols on x86_64
I submitted an earlier patch that make __phys_addr an inline.  This obviously
results in an increase in the code size.  One step I can take to reduce that
is to make it so that the __pa_symbol call does a direct translation for
kernel addresses instead of covering all of virtual memory.

On my system this reduced the size for __pa_symbol from 5 instructions
totalling 30 bytes to 3 instructions totalling 16 bytes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215356.8521.92472.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-16 16:42:09 -08:00
Alexander Duyck 0bdf525f04 x86: Improve __phys_addr performance by making use of carry flags and inlining
This patch is meant to improve overall system performance when making use of
the __phys_addr call.  To do this I have implemented several changes.

First if CONFIG_DEBUG_VIRTUAL is not defined __phys_addr is made an inline,
similar to how this is currently handled in 32 bit.  However in order to do
this it is required to export phys_base so that it is available if __phys_addr
is used in kernel modules.

The second change was to streamline the code by making use of the carry flag
on an add operation instead of performing a compare on a 64 bit value.  The
advantage to this is that it allows us to significantly reduce the overall
size of the call.  On my Xeon E5 system the entire __phys_addr inline call
consumes a little less than 32 bytes and 5 instructions.  I also applied
similar logic to the debug version of the function.  My testing shows that the
debug version of the function with this patch applied is slightly faster than
the non-debug version without the patch.

Finally I also applied the same logic changes to __virt_addr_valid since it
used the same general code flow as __phys_addr and could achieve similar gains
though these changes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215315.8521.46270.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-16 16:42:08 -08:00
Alexander Duyck fb50b020c5 x86: Move some contents of page_64_types.h into pgtable_64.h and page_64.h
This patch is meant to clean-up the fact that we have several functions in
page_64_types.h which really don't belong there.  I found this issue when I
had tried to replace __phys_addr with an inline function.  It resulted in the
realmode bits generating compile warnings about types.  In order to resolve
that I am relocating the address translation to page_64.h since this is in
keeping with where these functions are located in 32 bit.

In addtion I have relocated several functions defined in init_64.c to
pgtable_64.h as this seems to be where most of the functions related to
memory initialization were already located.

[ hpa: added missing #include <asm/pgtable.h> to apic_numachip.c,
  as reported by Yinghai Lu. ]

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215244.8521.31505.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
2012-11-16 16:40:34 -08:00
Jeremy Fitzhardinge 51c78eb3f0 x86: create _types.h counterparts for page*.h
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
2009-02-11 14:54:09 -08:00
Brian Gerst 26f80bd6a9 x86-64: Convert irqstacks to per-cpu
Move the irqstackptr variable from the PDA to per-cpu.  Make the
stacks themselves per-cpu, removing some specific allocation code.
Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot
adjustments.

tj: * sprinkle some underbars around.

    * irq_stack_ptr is not used till traps_init(), no reason to
      initialize it early.  On SMP, just leaving it NULL till proper
      initialization in setup_per_cpu_areas() works.  Dropped
      is_boot_cpu and early irq_stack_ptr initialization.

    * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack)
      instead of (char, irq_stack[IRQ_STACK_SIZE]).

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 00:38:58 +09:00
H. Peter Anvin 1965aae3c9 x86: Fix ASM_X86__ header guards
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:23 -07:00
Al Viro bb8985586b x86, um: ... and asm-x86 move
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:20 -07:00
Renamed from include/asm-x86/page_64.h (Browse further)