Commit graph

26 commits

Author SHA1 Message Date
Laurent Pinchart 6c11631480 media: v4l2-async: Document asd allocation requirements
The v4l2_async_notifier_add_subdev() function requires the asd pointer
it receives to be allocated dynamically, but doesn't explicitly say so.
Only one driver out of 13 get its right (atmel-sama5d2-isc.c, but with
memory leaks in the error paths), clearly showing we have an issue.

Update the v4l2_async_notifier_add_subdev() documentation to clearly
state the allocation requirement. Whether this will be enough to avoid
new offending code isn't certain, but it's a good first step
nonetheless.

Fixes: 9ca4653121 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10 14:26:05 +02:00
Sakari Ailus 820342aca0 media: v4l2-async: Add v4l2_async_notifier_add_fwnode_remote_subdev
v4l2_async_notifier_add_fwnode_remote_subdev is a convenience function for
parsing information on V4L2 fwnode subdevs.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 08:03:03 -04:00
Sakari Ailus 016413d967 media: v4l2-async: Get fwnode reference when putting it to the notifier's list
The v4l2_async_notifier_add_fwnode_subdev() did not take a reference of
the added fwnode, relying on the caller to handle that instead, in essence
putting the fwnode to be added if there was an error.

As the reference is eventually released during the notifier cleanup, this
is not intuitive nor logical. Improve this by always getting a reference
when the function succeeds, and the caller releasing the reference when it
does not *itself* need it anymore.

Luckily, perhaps, there were just a handful of callers using the function.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 08:01:43 -04:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Mauro Carvalho Chehab 6087b21533 media: v4l2-core: cleanup coding style at V4L2 async/fwnode
There are several coding style issues at those definitions,
and the previous patchset added even more.

Address the trivial ones by first calling:

	./scripts/checkpatch.pl --strict --fix-inline include/media/v4l2-async.h include/media/v4l2-fwnode.h include/media/v4l2-mediabus.h drivers/media/v4l2-core/v4l2-async.c drivers/media/v4l2-core/v4l2-fwnode.c

and then manually adjusting the style where needed.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05 06:49:16 -04:00
Steve Longerbeam 66beb323e4 media: v4l2: async: Remove notifier subdevs array
All platform drivers have been converted to use
v4l2_async_notifier_add_subdev(), in place of adding
asd's to the notifier subdevs array. So the subdevs
array can now be removed from struct v4l2_async_notifier,
and remove the backward compatibility support for that
array in v4l2-async.c.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:59:21 -04:00
Steve Longerbeam eae2aed1ea media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdev
The fwnode endpoint and reference parsing functions in v4l2-fwnode.c
are modified to make use of v4l2_async_notifier_add_subdev().
As a result the notifier->subdevs array is no longer allocated or
re-allocated, and by extension the max_subdevs value is also no
longer needed.

Callers of the fwnode endpoint and reference parsing functions must now
first initialize the notifier with a call to v4l2_async_notifier_init().
This includes the function v4l2_async_register_subdev_sensor_common(),
and the intel-ipu3, omap3isp, and rcar-vin drivers.

Since the notifier->subdevs array is no longer allocated in the
fwnode endpoint and reference parsing functions, the callers of
those functions must never reference that array, since it is now
NULL. Of the drivers that make use of the fwnode/ref parsing,
only the intel-ipu3 driver references the ->subdevs[] array,
(in the notifier completion callback), so that driver has been
modified to iterate through the notifier->asd_list instead.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:33:09 -04:00
Steve Longerbeam 23989b43f1 media: v4l2: async: Add convenience functions to allocate and add asd's
Add these convenience functions, which allocate an asd of match type
fwnode, i2c, or device-name, of size asd_struct_size, and then adds
them to the notifier asd_list.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:20:00 -04:00
Steve Longerbeam b47d7ff1ae media: v4l2: async: Add v4l2_async_notifier_add_subdev
v4l2_async_notifier_add_subdev() adds an asd to the notifier. It checks
that no other equivalent asd's have already been added to this notifier's
asd list, or to other registered notifier's waiting or done lists, and
increments num_subdevs.

v4l2_async_notifier_add_subdev() does not make use of the notifier subdevs
array, otherwise it would have to re-allocate the array every time the
function was called. In place of the subdevs array, the function adds
the newly allocated asd to a new master asd_list. The function will
return error with a WARN() if it is ever called with the subdevs array
allocated.

Drivers are now required to call a v4l2_async_notifier_init(), before the
first call to v4l2_async_notifier_add_subdev(), in order to initialize
the asd_list.

In v4l2_async_notifier_has_async_subdev(), __v4l2_async_notifier_register(),
and v4l2_async_notifier_cleanup(), maintain backward compatibility with
the subdevs array, by alternatively operate on the subdevs array or a
non-empty notifier->asd_list.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:17:33 -04:00
Mauro Carvalho Chehab 4a3fad709b media: fix usage of whitespaces and on indentation
On several places, whitespaces are being used for indentation,
or even at the end of the line.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:12:01 -05:00
Mauro Carvalho Chehab eb0f73ba12 media: v4l2-async: better describe match union at async match struct
Now that kernel-doc handles nested unions, better document the
match union at struct v4l2_async_subdev.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-29 07:15:14 -05:00
Mauro Carvalho Chehab 4e48afecd5 media: v4l2-async: simplify v4l2_async_subdev structure
The V4L2_ASYNC_MATCH_FWNODE match criteria requires just one
struct to be filled (struct fwnode_handle). The V4L2_ASYNC_MATCH_DEVNAME
match criteria requires just a device name.

So, it doesn't make sense to enclose those into structs,
as the criteria can go directly into the union.

That makes easier to document it, as we don't need to document
weird senseless structs.

At drivers, this makes even clearer about the match criteria.

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Hyun Kwon <hyun.kwon@xilinx.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-29 07:14:28 -05:00
Sakari Ailus aef69d5475 media: v4l: fwnode: Add a convenience function for registering sensors
Add a convenience function for parsing firmware for information on related
devices using v4l2_async_notifier_parse_fwnode_sensor_common() registering
the notifier and finally the async sub-device itself.

This should be useful for sensor drivers that do not have device specific
requirements related to firmware information parsing or the async
framework.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:03:15 -04:00
Sakari Ailus 7a9ec808ad media: v4l: fwnode: Add convenience function for parsing common external refs
Add v4l2_fwnode_parse_reference_sensor_common for parsing common
sensor properties that refer to adjacent devices such as flash or lens
driver chips.

As this is an association only, there's little a regular driver needs to
know about these devices as such.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 14:02:37 -04:00
Sakari Ailus 2cab00bb07 media: v4l: async: Allow binding notifiers to sub-devices
Registering a notifier has required the knowledge of struct v4l2_device
for the reason that sub-devices generally are registered to the
v4l2_device (as well as the media device, also available through
v4l2_device).

This information is not available for sub-device drivers at probe time.

What this patch does is that it allows registering notifiers without
having v4l2_device around. Instead the sub-device pointer is stored in the
notifier. Once the sub-device of the driver that registered the notifier
is registered, the notifier will gain the knowledge of the v4l2_device,
and the binding of async sub-devices from the sub-device driver's notifier
may proceed.

The complete callback of the root notifier will be called only when the
v4l2_device is available and no notifier has pending sub-devices to bind.
No complete callbacks are supported for sub-device notifiers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 13:56:24 -04:00
Laurent Pinchart b6ee3f0dcf media: v4l: async: Move async subdev notifier operations to a separate structure
The async subdev notifier .bound(), .unbind() and .complete() operations
are function pointers stored directly in the v4l2_async_subdev
structure. As the structure isn't immutable, this creates a potential
security risk as the function pointers are mutable.

To fix this, move the function pointers to a new
v4l2_async_subdev_operations structure that can be made const in
drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 13:51:45 -04:00
Sakari Ailus 9ca4653121 media: v4l: fwnode: Support generic parsing of graph endpoints in a device
Add two functions for parsing devices graph endpoints:
v4l2_async_notifier_parse_fwnode_endpoints and
v4l2_async_notifier_parse_fwnode_endpoints_by_port. The former iterates
over all endpoints whereas the latter only iterates over the endpoints in
a given port.

The former is mostly useful for existing drivers that currently implement
the iteration over all the endpoints themselves whereas the latter is
especially intended for devices with both sinks and sources: async
sub-devices for external devices connected to the device's sources will
have already been set up, or the external sub-devices are part of the
master device.

Depends-on: ("device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31 13:47:21 -04:00
Sakari Ailus 859969b38e [media] v4l: Switch from V4L2 OF not V4L2 fwnode API
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs.
Async OF matching is replaced by fwnode matching and OF matching support
is removed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c
Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06 09:58:16 -03:00
Sakari Ailus ecdf0cfe71 [media] v4l: async: Add fwnode match support
Add fwnode matching to complement OF node matching. And fwnode may also be
an OF node.

Do not enable fwnode matching yet. It will replace OF matching soon.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06 09:26:55 -03:00
Mauro Carvalho Chehab ab4f5a4afc [media] v4l2-async: document the remaining stuff
There are one enum and 4 functions undocumented there.
Document them. That will fix the broken links at the
v4l2-subdev.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23 08:04:21 -03:00
Mauro Carvalho Chehab f8b2737707 [media] Docbook: Fix comments at v4l2-async.h
Warning(.//include/media/v4l2-async.h:62): No description found for parameter 'match_type'
Warning(.//include/media/v4l2-async.h:62): Excess struct/union/enum/typedef member 'bus_type' description in 'v4l2_async_subdev'
Warning(.//include/media/v4l2-async.h:76): cannot understand function prototype: 'struct v4l2_async_notifier '

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2015-08-22 05:17:27 -03:00
Sylwester Nawrocki b426b3a660 [media] V4L: Merge struct v4l2_async_subdev_list with struct v4l2_subdev
By integrating the v4l2-async API internals a bit more with
the core overall the v4l2-async code becomes a bit simpler
and easier to follow.
Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:54:56 -03:00
Sylwester Nawrocki e8419d0890 [media] V4L: Rename subdev field of struct v4l2_async_notifier
This is a purely cosmetic change. Since the 'subdev' member
points to an array of subdevs make it more explicit by
renaming to the plural form.
Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:53:11 -03:00
Sylwester Nawrocki e7359f8e66 [media] V4L: Add V4L2_ASYNC_MATCH_OF subdev matching type
Add support for matching by device_node pointer. This allows
the notifier user to simply pass a list of device_node pointers
corresponding to sub-devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:52:32 -03:00
Sylwester Nawrocki cfca7644d7 [media] V4L: Rename v4l2_async_bus_* to v4l2_async_match_*
enum v4l2_async_bus_type also selects a method subdevs are matched
in the notification handlers, rename it to v4l2_async_match_type
so V4L2_ASYNC_MATCH_OF entry can be further added for matching by
device tree node pointer.
Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:52:00 -03:00
Guennadi Liakhovetski e9e310491b [media] V4L2: support asynchronous subdevice registration
Currently bridge device drivers register devices for all subdevices
synchronously, typically, during their probing. E.g. if an I2C CMOS sensor
is attached to a video bridge device, the bridge driver will create an I2C
device and wait for the respective I2C driver to probe. This makes linking
of devices straight forward, but this approach cannot be used with
intrinsically asynchronous and unordered device registration systems like
the Flattened Device Tree. To support such systems this patch adds an
asynchronous subdevice registration framework to V4L2. To use it respective
(e.g. I2C) subdevice drivers must register themselves with the framework.
A bridge driver on the other hand must register notification callbacks,
that will be called upon various related events.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 16:30:00 -03:00