There is no need to use bulk i2c_transfer() to write single register.
Use write register function instead.
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TS2022 is slightly newer and different version of same tuner, which
could be supported with rather small changes. Tuner type is
auto-detected.
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
>From the daily build:
rtl2832.c: In function 'rtl2832_read_status':
rtl2832.c:703:12: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (tmp == 10) {
^
The code is OK, it's just the compiler that cannot figure out what's
going on. So just init 'tmp' to 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add xtal as a configuration parameter so it can be used
in the IF register value calculation. If not set in the
configuration then use a default value.
Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix a few minor CodingStyle issues at the source code:
- Use proper multi-line comments;
- Align the log tables;
- Remove the .type from dvb_frontend_ops, since this is not
needed anymore (since the drivers conversion to DVBv5);
- Remove emacs format macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ideally, we should be replacing this function by intlog10().
While we don't do that, let's at least constify the tables,
in order to remove its code footfrint, and get rid of nelems.
This also fixes a few 80-cols CodingStyle warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
WARNING: braces {} are not necessary for any arm of this statement
+ if (ret == 0) {
[...]
+ } else {
[...]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Get rid of the remaining checkpatch.pl warnings:
WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The logic there is too complex and it looks like an inifite
loop.
So, simplify the logic and implement it as a for loop.
This gets rid of the following checkpatch.pl warnings:
WARNING: else is not generally useful after a break or return
+ return LG3306_UNLOCK;
+ } else {
WARNING: else is not generally useful after a break or return
+ return LG3306_UNLOCK;
+ } else {
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use pr_foo() where there's a direct replacement. For debug, use
custom-made macros, for now, as there are 3 different debug levels.
We should get rid of those some day, specially since several such
macros can be just removed, as Kernel trace would provide about
the same output.
This gets rid of some checkpatch errors:
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
+#define lg_info(fmt, arg...) printk(KERN_INFO "lgdt3306a: " fmt, ##arg)
ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_dbg(fmt, arg...) if (debug & DBG_INFO) \
+ lg_printk(KERN_DEBUG, fmt, ##arg)
ERROR: Macros with complex values should be enclosed in parentheses
+#define lg_reg(fmt, arg...) if (debug & DBG_REG) \
+ lg_printk(KERN_DEBUG, fmt, ##arg)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fix this CodingStyle error:
ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so ag$
#56: FILE: drivers/media/dvb-frontends/lgdt3306a.c:19:
+ * along with this program; if not, write to the Free Software$
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes the following smatch errors:
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_set_if':
drivers/media/dvb-frontends/lgdt3306a.c:695:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_monitor_vsb':
drivers/media/dvb-frontends/lgdt3306a.c:1033:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_oper_mode':
drivers/media/dvb-frontends/lgdt3306a.c:1082:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_lock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1109:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_neverlock_status':
drivers/media/dvb-frontends/lgdt3306a.c:1185:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_pre_monitoring':
drivers/media/dvb-frontends/lgdt3306a.c:1199:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_get_packet_error':
drivers/media/dvb-frontends/lgdt3306a.c:1310:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As warned by smatch:
drivers/media/dvb-frontends/lgdt3306a.c:1354 log10_x1000() error: buffer overflow 'valx_x10' 14 <= 14
drivers/media/dvb-frontends/lgdt3306a.c:1355 log10_x1000() error: buffer overflow 'log10x_x1000' 14 <= 14
There's a potential of returning a value out of the buffer. Fix it.
While here, remove the ugly braced block.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Simplify the check if CONFIG_DVB_LGDT3306A is enabled, use the
IS_ENABLED() macro, just like the other frontend modules.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
While this is not a mandatory rule at the CodingStyle, we prefer
hexadecimal values in lowercase. Currently, there's a mix of lowercase
and uppercase ons at lgdt3306a. So, convert all to lowercase with this
small script:
perl -ne 'if (m,0x([\dA-F]+),) { $o=$1; $n=lc $1; s,0x($o),0x$n, } print $_'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Just CodingStyle. No functional changes.
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
fix WARNING: 'supress' may be misspelled - perhaps 'suppress'?
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We should not be using typedefs at the Kernel, as this makes harder
for reviewers to understand the code.
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes CodingStyle error:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable.
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
No need for an else, as the previous if will return.
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This ATSC/QAM-B demodulator is used by several new devices.
Add support for it. Other patches will fix CodingStyle issues.
Signed-off-by: Fred Richter <frichter@hauppauge.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Instead of implement its own logic, use the already-defined one.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch is based on Antti's silabs branch.
Add support for 1.7 MHz bandwidth. Supported in all versions of Si2168 according to short data sheets.
[mchehab@osg.samsung.com: Fix CodingStyle]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch should is based on Antti's silabs branch.
According to dvb-frontend.h set_frontend may be called with bandwidth_hz set to 0 if automatic bandwidth is required. Si2168 does not support automatic bandwidth and does not declare FE_CAN_BANDWIDTH_AUTO in caps.
This patch will change the behaviour in a way that EINVAL is returned if bandwidth_hz is 0.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
symbol-rate report was wrongly removed off by the commit:906aaf5a .
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes]
int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes]
int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes]
int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes]
int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes]
int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes]
int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
^
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There was 2 muxed I2C adapters, one for demod tuner bus and one for
internal use. Idea of internal I2C adapter was to force I2C repeater
close when demod access its registers. Driver has also delayed work
queue based method to close I2C repeater.
After regmap conversion internal I2C adapter based repeater close
left unused - only work queue method was in use. We could not use
internal mux adapter method with regmap as it makes recursive regmap
call, which causes deadlock as regmap has own locking. Due to that
remove whole method totally.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We are consumer of DVB frontend provided by rtl28xxu module. Due to
that we must use refcount to ensure none could remove rtl28xxu when
we are alive (or when we are streaming, if more fine-grained
refcounting is wanted).
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Put demod to soft reset in order to save power when sleep. That drops
power usage ~30mA @5V on USB dongle I tested. In real life it does
not matter much as USB IF powers off demod too, but now it is done
twice - demod and USB IF.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I have implemented tons of things for that driver, more than anyone
else, so lets claim copyright and module authorship.
Cc: Thomas Mair <thomas.mair86@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove all the stuff that is not needed anymore. Rename variable.
Remove extra new lines.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pass correct device, platform device, for logging system in order
to format printouts correctly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
That SDR driver module was abusing DVB frontend SEC (satellite
equipment controller) device and due to that it was also using
legacy DVB binding. Platform bus is pseudo-bus provided by kernel
driver model and it fits cases like that, where any other busses
are not suitable.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
'dev' sounds better than 's' for such variable.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Provide register read and write callbacks for SDR module.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Chips uses 8-bit register addresses with 5 pages. Extend register
address by using register page as a first byte of address, defining
virtual register addresses. That is common method of handling
register pages and regmap also uses it. Remove page + address
conversion glue which was there for regmap.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Benjamin Larsson