Fixing doorbell register length to 32bits per spec. On Skylake NTB, the
doorbell registers are 32bit write only registers. The source for the
doorbell is a 64bit register that shows the interrupt bits.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6cc4 ("ntb: Adding Skylake Xeon NTB support")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
A divide by zero error occurs if qp_count is less than mw_count because
num_qps_mw is calculated to be zero. The calculation appears to be
incorrect.
The requirement is for num_qps_mw to be set to qp_count / mw_count
with any remainder divided among the earlier mws.
For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1
will have 3 qps per window and mws 2 through 4 will have 2 qps per window.
Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher
than when mw_num >= qp_count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In cases where there are more mw's than spads/2-2, the mw count gets
reduced to match the limitation. ntb_transport also tries to ensure that
there are fewer qps than mws but uses the full mw count instead of
the reduced one. When this happens, the math in
'ntb_transport_setup_qp_mw' will get confused and result in a kernel
paging request bug.
This patch fixes the bug by reducing qp_count to the reduced mw count
instead of the full mw count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The code mistakenly prints the local perf results for the remote test
so the script reports identical results for both directions. Fix this
by ensuring we print the remote result.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: a9c59ef774 ("ntb_test: Add a selftest script for the NTB subsystem")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The order parameters are powers of 2; adjust the usage information
to use correct mathematical representations.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Fixes: 8a7b6a778a ("ntb: ntb perf tool")
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace first padding in the tcp_md5sig structure with a new flag field
and address prefix length so it can be specified when configuring a new
key for TCP MD5 signature. The tcpm_flags field will only be used if the
socket option is TCP_MD5SIG_EXT to avoid breaking existing programs, and
tcpm_prefixlen only when the TCP_MD5SIG_FLAG_PREFIX flag is set.
Signed-off-by: Bob Gilligan <gilligan@arista.com>
Signed-off-by: Eric Mowat <mowat@arista.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows the keys used for TCP MD5 signature to be used for whole
range of addresses, specified with a prefix length, instead of only one
address as it currently is.
Signed-off-by: Bob Gilligan <gilligan@arista.com>
Signed-off-by: Eric Mowat <mowat@arista.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ioctl support to IPoIB device driver. For now, this
ioctl will support timestamp get and set.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Enable PTP for IPoIB rdma_netdev and add the ability
to get the time stamping parameters using ethtool.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add the ndo that supports change mtu for IPoIB.
The callback called from the ipoib ULP driver, that gives the ability to
change the SW and HW resources accordingly in the lower driver.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The mtu extra space that kept for the HW is specific for each link type,
and it is different in mlx5e and mlx5i modules.
Now it is kept in the priv structures, set by the mlx5e/mlx5i driver
accordingly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add function that sets the default values for ipoib, setting/clearing
abilities that IPoIB doesn't support, like RQ size in this case.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Updating the carrier involves specific HW setting, each profile should
use its own function for that.
Both IPoIB and VF representor don't need carrier update function, since
VF representor has only a logical link to VF and IPoIB manages its own
link via ib_core upper layer.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Port flow control supported only for ethernet ports,
therefore, prevent any call if the port type differs from
MLX5_CAP_PORT_TYPE_ETH.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
IPoIB netdevice driver was only introduced in previous kernel release
and it is growing in terms of features and LOC, move it to a separate
directory.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).
Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.
Here is the race:
CPU 0 CPU1
- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
- acquires the mutex_lock
- allocates rdma response queues
- if FULL_INIT_DONE set,
tell uP to route ctrl queue compl
to rdma rspq
- relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock
This patch fixes the above issue.
Fixes: e7519f9926f1('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
CC: Stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).
Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.
Here is the race:
CPU 0 CPU1
- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
- acquires the mutex_lock
- allocates rdma response queues
- if FULL_INIT_DONE set,
tell uP to route ctrl queue compl
to rdma rspq
- relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock
This patch fixes the above issue.
Fixes: e7519f9926f1('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
CC: Stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pi+d
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Add general use per-vNIC mailbox area and use it for VLAN filtering
support. Initially proto is hardcoded to 802.1q.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* remove wext calling ndo_do_ioctl, since nobody needs
that now and it makes the type change easier
* use struct iwreq instead of struct ifreq almost everywhere
in wireless extensions code
* copy only struct iwreq from userspace in dev_ioctl for the
wireless extensions, since it's smaller than struct ifreq
-----BEGIN PGP SIGNATURE-----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=O240
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Here's just the fix for that ancient bug:
* remove wext calling ndo_do_ioctl, since nobody needs
that now and it makes the type change easier
* use struct iwreq instead of struct ifreq almost everywhere
in wireless extensions code
* copy only struct iwreq from userspace in dev_ioctl for the
wireless extensions, since it's smaller than struct ifreq
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid NULL dereference in setup_sge_queues() when the adapter is
in non offload mode.
Fixes: 0fbc81b3ad ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as ip_gre, geneve and vxlan, use key->tos as traffic class value.
CC: Peter Dawson <petedaws@gmail.com>
Fixes: 0e9a709560 ("ip6_tunnel, ip6_gre: fix setting of DSCP on
encapsulated packets”)
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each Octeon output ring can DMA packets to host memory in two modes: info-
pointer mode and buffer-pointer-only mode. In info-pointer mode, Octeon
takes two buffer pointers for each packet and places the length of the
packet along with specified number of bytes from the beginning of the
packet into one buffer and the rest of the packet in a separate buffer. In
buffer-pointer-only mode, Octeon takes single buffer pointer and places the
length of the packet at the beginning of the buffer followed by the packet
data.
This patch switches all Octeon output rings from info-pointer mode to
buffer-pointer-only mode. This results in fewer DMA setups and cache line
snoops.
Signed-off-by: Prasad Kanneganti <pkanneganti@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable opt in pptp_release() is set but never used, thus needs to be
removed.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add implementation to support ethtool -K ethX rx-vlan-filter on/off.
Rename OCTNET_CMD_ENABLE_VLAN_FILTER command to OCTNET_CMD_VLAN_FILTER_CTL
and add OCTNET_CMD_VLAN_FILTER_ENABLE and OCTNET_CMD_VLAN_FILTER_DISABLE
parameters so that it can be used to enable or disable the filter.
Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
-----BEGIN PGP SIGNATURE-----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=WD1J
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlk3q9cRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXMFbRAAx9XBHtsHPI0AcWEagprXFoeKClEmlV33
Az06mEwgWKM0IMKELdstFLgpT80zp71v44k61vxWHudJi3a3rEbcDiujmttKg4II
fL3CfjpYS3son449VZWc/X0ZsvU/5vhusDkx8QwGWK1FgfOLVNvwNtgxWr3roUFC
qUQZImkTvgKYuhoaoV5Sx0VtUEJ9ukLNAqjy0HTfTU15jkX4/nqmlB+8ov2oamYv
r502+LEzNVoCmlYW1SBH+yn7zebIad2UtRZqz+TV8FnJl3p4yFI1Odvo8hbODTzT
vo+YsSmhd23eKnw+yXpqdPYng3yXH5Co3vLFumpBcyNkZlCtSokLrJ1/VOjtTNVn
oM+gsR77I6zGknFdiBzITLJRFABHlziSfeaDyyhfQX9CAfrCv9t5hiqn6KwRuiGj
H1hD2JkFWeJLLPGO4YauJk5PLcAdMILfjHRHW7lBeKaT76nH4Ha5PgpCj22hNSCo
m1EDdR30QzkfL28iYp8LM9yNhkm05Y8VG517AmIrzJUl6/RhTRH2f5d6+ChTQ7AA
cp89ITqEeccCso6xULCPjqaGIuYCEopDFjQN/WP8Pt5bXweiiQ6HpAgMDp2E5PfD
3yKwYvXDyl5HIa+ZbEDPLuna1OjDu7BrCe+nuDwsVfeM0fOHViABPl6mAvH7VXvb
nQhOVeQSP8I=
=e4F/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two fixes for am335x-sl50 to fix a boot time error
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
* tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
Signed-off-by: Olof Johansson <olof@lixom.net>
It turns out balloon does not handle IOMMUs correctly.
We should fix that at some point, for now let's just
disable this configuration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZRt8uAAoJECgfDbjSjVRph00H/2YkmqY3o5J769R1x/v4Q1Jl
7ZI++QjLnMSJYfw/oVSSQ7YvmG0MNnjGZlwOGblvmiRq1USD85H23gov5kuKzlgf
xKJCzlYG+TgaM0ZR43J4kk0E13QrRkYgPoC0rpm6X7mdYScLo5Hvcw8OfKR5akpA
xhxpkX0+42ftbvDVeG7oI6Yg+HZUTS6Vp5aqrW4bykaAst3dEXKHhBczyx05zqmZ
np6aymSz13Stl5IqIhoJaOGprN+iRhxm+iT+b+J2JH0W4sA/rVxkOZ2FXAtPP0JJ
tY69SYZCBf216dV8UKGSr8/1WiBVlxjmgbzXvrVKGv9BiPza/1jRGm44Em8y6Cc=
=BQi2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio bugfix from Michael Tsirkin:
"It turns out balloon does not handle IOMMUs correctly. We should fix
that at some point, for now let's just disable this configuration"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: disable VIOMMU support
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ismt: fix wrong device address when unmap the data buffer
i2c: rcar: use correct length when unmapping DMA
Pull MIPS fixes from Ralf Baechle:
- Three highmem fixes:
+ Fixed mapping initialization
+ Adjust the pkmap location
+ Ensure we use at most one page for PTEs
- Fix makefile dependencies for .its targets to depend on vmlinux
- Fix reversed condition in BNEZC and JIALC software branch emulation
- Only flush initialized flush_insn_slot to avoid NULL pointer
dereference
- perf: Remove incorrect odd/even counter handling for I6400
- ftrace: Fix init functions tracing
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: .its targets depend on vmlinux
MIPS: Fix bnezc/jialc return address calculation
MIPS: kprobes: flush_insn_slot should flush only if probe initialised
MIPS: ftrace: fix init functions tracing
MIPS: mm: adjust PKMAP location
MIPS: highmem: ensure that we don't use more than one page for PTEs
MIPS: mm: fixed mappings: correct initialisation
MIPS: perf: Remove incorrect odd/even counter handling for I6400
virtio balloon bypasses the DMA API entirely so does not support the
VIOMMU right now. It's not clear we need that support, for now let's
just make sure we don't pretend to support it.
Cc: stable@vger.kernel.org
Cc: Wei Wang <wei.w.wang@intel.com>
Fixes: 1a93769399 ("virtio: new feature to detect IOMMU device quirk")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull x86 fixes from Thomas Gleixner:
"Two fixlets for x86:
- Handle WARN_ONs proper with the new UD based WARN implementation
- Disable 1G mappings when 2M mappings are disabled by kmemleak or
debug_pagealloc. Otherwise 1G mappings might still be used,
confusing the debug mechanisms"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Disable 1GB direct mappings when disabling 2MB mappings
x86/debug: Handle early WARN_ONs proper
Pull timer fixes from Thomas Gleixner:
"Three fixlets for timers:
- Two hot-fixes for the alarmtimer based posix timers, which prevent
a nasty DOS by self rescheduling timers. The proper cleanup of that
mess is queued for 4.13
- Make a function static"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make tick_broadcast_setup_oneshot() static
alarmtimer: Rate limit periodic intervals
alarmtimer: Prevent overflow of relative timers
Pull scheduler fixes from Thomas Gleixner:
"Two small fixes for the schedulre core:
- Use the proper switch_mm() variant in idle_task_exit() because that
code is not called with interrupts disabled.
- Fix a confusing typo in a printk"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
sched/fair: Fix typo in printk message
Pull perf fixes from Thomas Gleixner:
"Three fixes for the perf user space side:
- Fix the probing of precise_ip level, which got broken recently for
x86.
- Unbreak the ARCH=x86_64 build
- Report module before trying to unwind into the module code, which
avoids broken stack frames displayed"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf unwind: Report module before querying isactivation in dwfl unwind
perf tools: Fix build with ARCH=x86_64
perf evsel: Fix probing of precise_ip level for default cycles event
Pull irq fix from Thomas Gleixner:
"Add a missing resource release to an error path"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Release resources in __setup_irq() error path
Pull objtool fix from Thomas Gleixner:
"A single fix which adds fortify_panic to the list of no return
functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add fortify_panic as __noreturn function
After commit 6d3c8c0dd8 ("net: dsa: Remove master_netdev and
use dst->cpu_dp->netdev") and a29342e739 ("net: dsa: Associate
slave network device with CPU port") we would be seeing NULL pointer
dereferences when accessing dst->cpu_dp->netdev too early. In the legacy
code, we actually know early in advance the master network device, so
pass it down to the relevant functions.
Fixes: 6d3c8c0dd8 ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev")
Fixes: a29342e739 ("net: dsa: Associate slave network device with CPU port")
Reported-by: Jason Cobham <jcobham@questertangent.com>
Tested-by: Jason Cobham <jcobham@questertangent.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Missing crypto deps for some platforms.
Default to n for new module.
config: m68k-amcore_defconfig (attached as .config)
compiler: m68k-linux-gcc (GCC) 4.9.0
make.cross ARCH=m68k
All errors (new ones prefixed by >>):
net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x732f8): undefined reference to `crypto_alloc_aead'
net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x7333c): undefined reference to `crypto_aead_setkey'
net/built-in.o: In function `tls_set_sw_offload':
>> (.text+0x73354): undefined reference to `crypto_aead_setauthsize'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang says:
====================
remove dst garbage collector logic
The current mechanism of dst release is a bit complicated. It is because
the users of dst get divided into 2 situations:
1. Most users take the reference count when using a dst and release the
reference count when done.
2. Exceptional users like IPv4/IPv6/decnet/xfrm routing code do not take
reference count when referencing to a dst due to some histotic reasons.
Due to those exceptional use cases in 2, reference count being 0 is not an
adequate evidence to indicate that no user is using this dst. So users in 1
can't free the dst simply based on reference count being 0 because users in
2 might still hold reference to it.
Instead, a dst garbage list is needed to hold the dst entries that already
get removed by the users in 2 but are still held by users in 1. And a periodic
garbage collector task is run to check all the dst entries in the list to see
if the users in 1 have released the reference to those dst entries.
If so, the dst is now ready to be freed.
This logic introduces unnecessary complications in the dst code which makes it
hard to understand and to debug.
In order to get rid of the whole dst garbage collector (gc) and make the dst
code more unified and simplified, we can make the users in 2 also take reference
count on the dst and release it properly when done.
This way, dst can be safely freed once the refcount drops to 0 and no gc
thread is needed anymore.
This patch series' target is to completely get rid of dst gc logic and free
dst based on reference count only.
Patch 1-3 are preparation patches to do some cleanup/improvement on the existing
code to make later work easier.
Patch 4-21 are real implementations.
In these patches, a temporary flag DST_NOGC is used to help transition
those exceptional users one by one. Once every component is transitioned,
this temporary flag is removed.
By the end of this patch series, all dst are refcounted when being used
and released when done. And dst will be freed when its refcount drops to 0.
No dst gc task is running anymore.
Note: This patch series depends on the decnet fix that was sent right before:
"decnet: always not take dst->__refcnt when inserting dst into hash table"
v2:
add curly braces in udp_v4/6_early_demux() in patch 02
add EXPORT_SYMBOL() for dst_dev_put() in patch 05
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is meant to add a debug warning on the situation where dst is
being held during its destroy phase. This could potentially cause double
free issue on the dst.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As some dst flags are removed, reorder the dst flags to fill in the
blanks.
Note: these flags are not exposed into user space. So it is safe to
reorder.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DST_NOCACHE flag check has been removed from dst_release() and
dst_hold_safe() in a previous patch because all the dst are now ref
counted properly and can be released based on refcnt only.
Looking at the rest of the DST_NOCACHE use, all of them can now be
removed or replaced with other checks.
So this patch gets rid of all the DST_NOCACHE usage and remove this flag
completely.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
