There is a null check on pointer dev which implies it may be null, however
dev can never be null as it is set in rtl8192_usb_probe via the call
to usb_set_intfdata.
Detected by CoverityScan, CID#143078 ("Dereference after null check")
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the MACRO Rx_Smooth_Factor to RX_SMOOTH_FACTOR, this clears the
checkpatch issue with CamelCase naming.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the MACRO RTL819xU_MODULE_NAME to RTL819XU_MODULE_NAME, this
clears the checkpatch issue with CamelCase naming.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused function declarations. This is a coding style change
which should have no impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the function read_cam(), as it is unused in code.
Simple style change which should not impact runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the function write_cam() as it is unused.
Simple style change which should not impact runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structure rt_dot11d_info contains a memeber variable 'enabled',
which causes a checkpatch issue as it is declared as being of type
bool. The type of the variable has been changed to a 'u8', to clear
the issue.
Additionally to aid searching for the member variable in code it
has been renamed from 'enabled' to 'dot11d_enabled'.
These are purely coding style changes which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function dot11d_init() was previously renamed to clear a style
issue. Unfortunately the new name used, dot11d_init(), clashes with
a sybmol which is exported with the same name. To correct this
problem the function has been renamed to rtl8192u_dot11d_init().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_ChannelPlan to EEPROM_CHANNEL_PLAN,
this clears the checkpatch issue with CamelCase naming.
This is purely a coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_Customer_ID to EEPROM_CUSTOMER_ID,
this change clears the checkpatch issue with CamelCase naming.
This is purely a coding style change which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename the constant EEPROM_Default_TxPower to EEPROM_DEFAULT_TX_POWER,
this clears the checkpatch issue with CamelCase issue.
This is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_Default_CrystalCap to
EEPROM_DEFAULT_CRYSTAL_CAP, this clears the checkpatch issue with
CamelCase naming.
This is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_Default_PwDiff to EEPROM_DEFAULT_PW_DIFF,
this clears the checkpatch issue with CamelCase naming.
This change is purely a coding style change which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_Default_ThermalMeter to
EEPROM_DEFAULT_THERNAL_METER, this change clears the checkpatch
issue with CamelCase naming.
This is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_TxPwIndex_Ver to
EEPROM_TX_PW_INDEX_VER, this clears the checkpatch issue with
CamelCase naming.
This is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_TxPwIndex_CCK_V1 to
EEPROM_TX_PW_INDEX_CCK_V1, this clears the checkpatch issue with
CamelCase naming.
This is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_TxPwIndex_OFDM_24G to
EEPROM_TX_PW_INDEX_OFDM_24G, this change clears the checkpatch
issue with CamelCase naming.
This change is a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_TxPwIndex_OFDM_24G_V1 to
EEPROM_TX_PW_INDEX_OFDM_24G_V1, this change clears the checkpatch
issue with CamelCase naming.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_TxPwIndex_CCK to EEPROM_TX_PW_INDEX_CCK.
This change clears the checkpatch issue with CamelCase naming.
The change is coding style in nature so should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_CrystalCap to EEPROM_CRYSTAL_CAP. This
clears the checkpatch issue with CamelCase naming.
This is a coding style change which should not impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the constant EEPROM_PwDiff to EEPROM_PW_DIFF. This change clears
the checkpatch issue with CamelCase naming.
This is a coding style change which should not impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename EEPROM_ThermalMeter to EEPROM_THERMAL_METER. This change clears
the checkpatch issue with CamelCase naming.
This change is a coding style change which should not impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename EEPROM_TxPowerDiff to EEPROM_TX_POWER_DIFF. This change clears
the checkpatch issue with CamelCase naming.
This change is purely a coding style change which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename enumerated type VERSION_819xU to version_819xu to clear
checkpatch issue with CamelCase naming. Additionally the constants
defined by the type are renamed for the same reason.
Remove the 'typedef' directive to clear the checkpatch issue with
defining new types.
The enumerated type has been moved to the file where the type is
actually used, r8192U.h
Additionally the memeber variable, which uses the type
(card_8192_version), has been changed to use the type to enable
compiler typechecking.
These are coding style changes which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The defined constant MIMO_PS_STATIC is used for this test for zero
elsewhere in code so the magic number '0' has been replaced with that
comment, which was actually explicitly mentioned in the comment.
This is a simple coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function Dot11d_Reset causes a checkpatch issue due to its use of
CamelCase naming, so has been renamed to dot11d_reset.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function Dot11d_Init() causes a checkpatch issue due to its use
of CamelCase naming. The function has been renamed to dot11d_init.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro eqMacAddr implements the same functionality as the
ether_addr_equal function defined in etherdevice.h, as a result the
macro has been removed from the code, and its use replaced with the
function call.
Note that to use the ether_addr_equal function the data array
containing the MAC Address has to be u16 aligned. Because of this the
struct rt_dot11d_info has had it's member variables re-ordered.
This is a coding style change which should have no impact on runtime
code execution.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The constants 'VeryLowRSSI' and 'CTSToSelfTHVal' generate warnings from
checkpatch due to the use of CamelCase naming. The two constants have
been renamed to 'VERY_LOW_RSSI' and 'CTS_TO_SELF_TH_VAL' respectively.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two constants, RateAdaptiveTH_Low_20M and RateAdaptiveTH_Low_40M
generate a checkpatch warning about CamelCase naming. The two have been
renamed to clear this issue. RATE_ADAPTIVE_TH_LOW_20M and
RATE_ADAPTIVE_TH_LOW_40M
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The constant RateAdaptiveTH_High causes a checkpatch issue with respect
to CamelCase naming. As a result the constant has been renamed to
RATE_ADAPTIVE_TH_HIGH.
This is purely a coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the enumerated type RF90_RADIO_PATH_E to rf90_radio_path_e.
Whilst it is not flagged as an issue by checkpatch, types are meant
to be named in lowercase.
This change is purely a coding style change which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the member variable bEnabled to enabled. This change clears the
checkpatch issue with CamelCase. Purely a coding style change which should not
impact runtime execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch warns about the creation of new types. This patch simply removes
the typedef from the enumeration RF90_RADIO_PATH_E to clear this checkpatch
warning. There should be no impact on run time code execution, as this is a
coding style issue only.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the typedef from the struct rx_drvinfo_819x_usb to leave it as a
simple structure.
This clears the issue flagged by checkpatch, defining new types.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change structure rx_desc_819x_usb from being typedef to being a simple
structure, without the typedef.
Clears a checkpatch issue, definging new types in the code.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change structure tx_fwinfo_819x_usb from being typedef to being a simple
structure, without the typedef.
Clears the coding style issue flagged by checkpatch, (new type definitions)
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change structure tx_desc_cmd_819x_usb from being typedef to being a simple
structure, without the typedef.
checkpatch warns about defining new types in the code.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change structure tx_desc_819x_usb from being typedef to being a simple
structure, without the typedef.
checkpatch warns about defining new types in code.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build warnings in rtl8192u when CONFIG_PROC_FS is not enabled
by marking the unused functions as __maybe_unused.
../drivers/staging/rtl8192u/r8192U_core.c:508:12: warning: 'proc_get_stats_ap' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:527:12: warning: 'proc_get_registers' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:568:12: warning: 'proc_get_stats_tx' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:627:12: warning: 'proc_get_stats_rx' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerry chuang <wlanfae@realtek.com>
Cc: devel@driverdev.osuosl.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up W=1 warning: variable set but not used.
Signed-off-by: Kenneth Lu <kuohsianglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog
has the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about
this code since it moved to staging last year, and if it needs
to come back, it can be reverted.
- lustre file system is removed. I've ranted at the lustre
developers about once a year for the past 5 years, with no
real forward progress at all to clean things up and get the
code into the "real" part of the kernel. Given that the
lustre developers continue to work on an external tree and try
to port those changes to the in-kernel tree every once in a
while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the
time working in their out-of-tree location and get things
cleaned up properly to get merged into the tree correctly at a
later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxvjGQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoEwCbBYnyUl3cwCszIJ3L3/zvUWpmqIgAn1DDsAim
dM4lmKg6HX/JBSV4GAN0
=zdta
-----END PGP SIGNATURE-----
Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog has
the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about this
code since it moved to staging last year, and if it needs to come
back, it can be reverted.
- lustre file system is removed.
I've ranted at the lustre developers about once a year for the past
5 years, with no real forward progress at all to clean things up
and get the code into the "real" part of the kernel.
Given that the lustre developers continue to work on an external
tree and try to port those changes to the in-kernel tree every once
in a while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the time
working in their out-of-tree location and get things cleaned up
properly to get merged into the tree correctly at a later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems"
* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
staging: ipx: delete it from the tree
ncpfs: remove uapi .h files
ncpfs: remove Documentation
ncpfs: remove compat functionality
staging: ncpfs: delete it
staging: lustre: delete the filesystem from the tree.
staging: vc04_services: no need to save the log debufs dentries
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
staging: vc04_services: remove struct vchiq_debugfs_info
staging: vc04_services: move client dbg directory into static variable
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
staging: vc04_services: no need to check debugfs return values
staging: mt7621-gpio: reorder includes alphabetically
staging: mt7621-gpio: change gc_map to don't use pointers
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
staging: mt7621-gpio: update #interrupt-cells for the gpio node
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
staging: mt7621-dts: add missing properties to gpio node
...
Unwind the registration loop into individual calls. Switch to use
proc_create_single where applicable.
Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>
rtl8192_usb_disconnect() is never called in atomic context.
rtl8192_usb_disconnect() is only set as ".disconnect" in
struct usb_driver.
Despite never getting called from atomic context,
rtl8192_usb_disconnect() calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the allocation of priv->oldaddr is not null checked which will
lead to subsequent errors when accessing priv->oldaddr. Fix this with
a null pointer check and a return of -ENOMEM on allocation failure.
Detected with Coccinelle:
drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test,
possible model on line 1723
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl8192_usb_probe is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep,
to avoid busy wait.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Derek Robson <robsonde@gmail.com>
Cc: simran singhal <singhalsimran0@gmail.com>
Cc: Riccardo Marotti <riccardo.marotti@gmail.com>
Cc: Fabrizio Perria <fabrizio.perria@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Tuomo Rinne <tuomo.rinne@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If 'rtl8192_usb_initendpoints()' fails, it may have allocated some
resources that need to be freed. The corresponding is propagated up to
'rtl8192_usb_prob()'. So, in this function if an error
code is returned by 'rtl8192_init()' we should call
'rtl8192_usb_deleteendpoints()'.
Some error handling code is also duplicated in 'rtl8192_init()' and in
'rtl8192_usb_prob()'. This looks harmless because the freed pointers are
set to NULL but it looks confusing.
Fix all that by just moving the 'fail' label and removing duplicated
error handling code from 'rtl8192_ini()'. All this resources freeing will
be handled by 'rtl8192_usb_prob()' directly.
The calling graph is:
rtl8192_usb_probe
--> rtl8192_init
--> rtl8192_usb_initendpoints
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If one of these memory allocations fail, a NULL pointer dereference will
occur later on.
Return -ENOMEM instead.
There is no need to free the resources already allocated, this is done
by the caller (i.e. 'rtl8192_usb_probe()') which calls
'rtl8192_usb_deleteendpoints()'.
The calling graph is:
rtl8192_usb_probe
--> rtl8192_init
--> rtl8192_usb_initendpoints
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
