ibuf and rbuf in lme2510_int_response are always assigned to before they
are read, and their addresses do not escape the function, so they have
no reason to be static.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Using the %ph printf extension for hex dumps like this makes the
generated code quite a bit smaller.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Drivers might try to access and run enable_source and disable_source
handlers when the driver that implements these handlers is clearing
the handlers during its unregister.
Fix the following race condition:
process 1 process 2
request video streaming unbind au0828
v4l2 checks if tuner is free
... ...
au0828_unregister_media_device()
... ...
(doesn't hold graph_mutex)
mdev->enable_source = NULL;
if (mdev && mdev->enable_source) mdev->disable_source = NULL;
mdev->enable_source()
(enable_source holds graph_mutex)
As shown above enable_source check is done without holding the graph_mutex.
If unbind happens to be in progress, au0828 could clear enable_source and
disable_source handlers leading to null pointer de-reference.
Fix it by protecting enable_source and disable_source set and clear and
protecting enable_source and disable_source handler access and the call
itself.
process 1 process 2
request video streaming unbind au0828
v4l2 checks if tuner is free
... ...
au0828_unregister_media_device()
... ...
(hold graph_mutex while clearing)
mdev->enable_source = NULL;
if (mdev) mdev->disable_source = NULL;
(hold graph_mutex to check and
call enable_source)
if (mdev->enable_source)
mdev->enable_source()
If graph_mutex is held to just heck for handler being null and needs to be
released before calling the handler, there will be another window for the
handlers to be cleared. Hence, enable_source and disable_source handlers
no longer hold the graph_mutex and expect callers to hold it to avoid
forcing them release the graph_mutex before calling the handlers.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Using sprintf() with a non-literal string makes some compiler complain
when building with -Wformat-security (eg. clang reports "format string
is not a string literal (potentially insecure)").
Here sprintf() format parameter is indirectly a literal string so there
is no security issue. Nevertheless adding a "%s" format string to
silent the warning helps to detect real bugs in the kernel.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The check assumes that we end on zero but actually we end on -1. Change
the post-op to a pre-op so that we do end on zero. Techinically now we
only loop 499 times instead of 500 but that's fine.
Fixes: dc12b12435 ("[media] media: ti-vpe: vpdma: Add abort channel desc and cleanup APIs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix to avoid possible memory leak if the decoder initialization got failed.
Free the allocated memory for file handle object before return in case
decoder initialization fails.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The FE_SUPPORTED() macro is basically the same as IS_REACHABLE, except
that it causes a warning with gcc-7:
common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined]
common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined]
common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined]
Using IS_REACHABLE() to define it avoids the warning.
Fixes: 3785bc170f ("[media] b2c2: break it into common/pci/usb directories")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
changeset da8ec560e3 ("[media] ivtv: implement new decoder command
ioctls") implemented proper support for mpeg audio and video control
at V4L2 API. Since then, the usage of the the DVB APIs is deprecated.
However, we never actually marked it as deprecated nor provided any
way to disable it. Let's do it now.
This patch prepares for the removal of this bad usage on a couple
of Kernel versions.
Fixes: da8ec560e3 ("[media] ivtv: implement new decoder command ioctls")
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove unused demod driver. Device that used it never went public.
If someone later decide to add support for a device using this
chipset, it should be easy enough to retrieve it from git
history.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I saw from ZyDAS ZD1301 sniffs it sets chip sleeping by using
REG_MISC_CTRL. That has very huge effect for power management, around
0.9W. Sleep is still disabled for all the old hardware just to avoid
possible regression as meaning of register bits are unknown.
I tested it also with some other devices and it seems to be working,
but I still consider it to be too risky to change it default.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ZyDAS ZD1301 is chip having USB interface and DVB-T demodulator
integrated. This driver is for USB interface part.
Device has USB ID 0ace:13a1. Used tuner is MT2060.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ZyDAS ZD1301 is chip having USB interface and DVB-T demodulator
integrated. This driver is for demodulator part.
Driver is very reduced, just basic demodulator functionality, no
statistics at all. It registers as a platform driver to driver core.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add configuration parameter to split long i2c writes as some I2C
adapters cannot write 10 bytes used as a one go.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pr_foo() provides a convenient way for printk's, enforcing
that they'll all prepend the error message with the driver's
name.
Use it inside ivtv.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the pr_fmt() macro to ivtv_driver.h and ensure that it
will be the first file to be included on all ivtv files.
While here, put the includes inside ivtv-driver.h on
alphabetic order.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As reported by gcc:
drivers/media/platform/sti/hva/hva-v4l2.c:227:6: warning: no previous prototype for 'hva_dbg_summary' [-Wmissing-prototypes]
void hva_dbg_summary(struct hva_ctx *ctx)
^~~~~~~~~~~~~~~
This function is used only internally, so make it static.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch creates 4 static debugfs entries to dump:
- the device-related information ("st-hva/device")
- the list of registered encoders ("st-hva/encoders")
- the current values of the hva registers ("st-hva/regs")
- the information about the last closed instance ("st-hva/last")
It also creates dynamically a debugfs entry for each opened instance,
("st-hva/<instance identifier>") to dump:
- the information about the frame (format, resolution)
- the information about the stream (format, profile, level,
resolution)
- the control parameters (bitrate mode, framerate, GOP size...)
- the potential (system, encoding...) errors
- the performance information about the encoding (HW processing
duration, average bitrate, average framerate...)
Each time a running instance is closed, its context (including the
debug information) is saved to feed, on demand, the last closed
instance debugfs entry.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds a short summary about the encoding operation at each
instance closing, for debug purpose (through dev_dbg()):
- information about the frame (format, resolution)
- information about the stream (format, profile, level, resolution)
- number of encoded frames
- potential (system, encoding...) errors
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 25ms delays here to use msleep() and
reduce the load on the hrtimer subsystem.
Link: http://lkml.org/lkml/2017/1/11/377
Reviwed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The gpiod API checks for NULL descriptors, there's no need to duplicate
the check in the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Despite checkpatch comments, it seems that ARM doesn't like
to use constified structs.
As reported by kernel build robot:
In file included from drivers/media/platform/coda/imx-vdoa.c:22:0:
drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init':
>> include/linux/device.h:1461:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
return __register(&(__driver) , ##__VA_ARGS__); \
^
include/linux/platform_device.h:198:29: note: in definition of macro 'platform_driver_register'
__platform_driver_register(drv, THIS_MODULE)
^~~
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
>> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(vdoa_driver);
^~~~~~~~~~~~~~~~~~~~~~
include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *'
extern int __platform_driver_register(struct platform_driver *,
^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/media/platform/coda/imx-vdoa.c:18:0:
drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit':
>> include/linux/device.h:1466:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
__unregister(&(__driver) , ##__VA_ARGS__); \
^
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
>> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(vdoa_driver);
^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/media/platform/coda/imx-vdoa.c:22:0:
include/linux/platform_device.h:201:13: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *'
extern void platform_driver_unregister(struct platform_driver *);
^~~~~~~~~~~~~~~~~~~~~~~~~~
So, let's just remove it.
This reverts commit 126f52b02e.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Both functions initialize the file handle with v4l2_fh_init() and thus
need to call clean up with v4l2_fh_exit() as appropriate. Fix it.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The device driver should keep going even if debugfs initialization fails.
So, change the return type to void.
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove a superfluous assignment to a local variable at the end of a
function.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add an inline function to obtain a struct uvc_buffer pointer from a
struct vb2_v4l2_buffer one.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use formulas for cnr estimates and get rid of old lut-based estimate.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Chip uses so called 8-bit i2c addresses, but on bus there is of
course correct 7-bit addresses with rw bit as lsb - verified
with oscilloscope.
Lets still use correct addresses in driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Driver supports 2 different device versions, AX and BX. Use device
IDs to pass chip version information to driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
it913x tuner driver is changed to platform model so we need bind it
using platform_device_register_data().
Also remove hacks from I2C adapter where fake tuner driver address
(addr >> 1) were used as those are no longer needed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
That tuner is integrated to demodulator and communicates via
demodulators address space. We cannot register both demodulator
and tuner having same address to same I2C bus, so better to change
it platform driver in order to implement I2C adapter correctly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
IT9130 series contains integrated tuner driver, which uses that
demodulator address space. Return regmap in order to allow it913x
driver communication.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Replace Booth's binary division algo with 64-bit multiply and division.
Fix related IF calculations.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Read eeprom content to chip state and read values there when needed.
Also debug dump eeprom content.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Implement DVBv5 UCB. Only uncorrected blocks are currently counted.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be
used for taking photos in 2.5MP resolution with fcam-dev.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
v4l2_subdev_{core/pad/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(one of the scripts used)
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
expression e1;
@@
v4l2_subdev_init(e1,&i@p)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_ops i;
File size before:
text data bss dec hex filename
16830 1064 0 17894 45e6 platform/exynos4-is/fimc-capture.o
7787 704 20 8511 213f platform/exynos4-is/mipi-csis.o
File size after:
text data bss dec hex filename
17022 880 0 17902 45ee platform/exynos4-is/fimc-capture.o
8299 192 20 8511 213f platform/exynos4-is/mipi-csis.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Commit a006c04e62 ("[media] exynos-gsc: Fixup clock management at
->remove()") changed the driver's .remove function logic to fist do
a pm_runtime_get_sync() to make sure the device is powered before
attempting to gate the gsc clock.
But the commit also removed a pm_runtime_disable() call that leads
to an unbalanced pm_runtime_enable() error if the driver is removed
and re-probed:
exynos-gsc 13e00000.video-scaler: Unbalanced pm_runtime_enable!
exynos-gsc 13e10000.video-scaler: Unbalanced pm_runtime_enable!
Fixes: a006c04e62 ("[media] exynos-gsc: Fixup clock management at ->remove()")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The file handle is not yet added in the vfd list. So no need
to call v4l2_fh_del(&ctx->fh) if it fails to create controls.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The file handle is not yet added in the vfd list. So no need
to call v4l2_fh_del(&ctx->fh) if it fails to create controls.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Setting GPIOs during probe causes null pointer deference when
GPIOLIB was not selected by Kconfig. Initialize driver private
field before calling set gpios.
It is regressing bug since 4.9.
Fixes: 07fdf7d9f1 ("[media] cxd2820r: add I2C driver bindings")
Reported-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Håkan Lennestål <hakan.lennestal@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The VDOA is able to transform the NV12 custom macroblock tiled format of
the CODA to YUYV format. If and only if the VDOA is available, the
driver can also provide YUYV support.
While the driver is configured to produce YUYV output, the CODA must be
configured to produce NV12 macroblock tiled frames and the VDOA must
transform the intermediate result into the final YUYV output.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the CODA driver is configured to produce NV12 output and the VDOA is
available, the VDOA can be used to transform the custom macroblock tiled
format to a raster-ordered format for scanout.
In this case, set the output format of the CODA to the custom macroblock
tiled format, disable the rotator, and use the VDOA to write to the v4l2
buffer. The VDOA is synchronized with the CODA to always un-tile the
frame that the CODA finished in the previous run.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
display_idx refers to the frame that will be returned in the next round.
The currently processed frame is ctx->display_idx and errors should be
reported for this frame.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In order to make the VDOA work correctly, the CODA must produce frames
in tiled format. Print this information in the debug output.
Also print the color format in fourcc instead of the numeric value.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Correctly store the rectangle of valid video data in the destination
q_data before rounding up to macroblock size. This fixes the output
of VIDIOC_G_SELECTION for the capture side compose rectangle.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The i.MX6 Video Data Order Adapter's (VDOA) sole purpose is to convert
from a custom macroblock tiled format produced by the CODA960 decoder
into linear formats that can be used for scanout.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use space characters at some source code places according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add basic support for initialization via DT
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Video capture subdevs may be over I2C and may sleep during xfer, so we
cannot do IRQ-disabled locking when calling the subdev.
The IRQ-disabled locking is meant to protect the DMA queue list
throughout the rest of the driver, so update the locking in
[start|stop]_streaming to protect just this list, and update the irqlock
comment to reflect what it actually protects.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove hard-coded I2C adapter in favor of getting the
ID from platform_data.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix problems with automatic module loading by adding MODULE_ALIAS. Also
fix various load-time errors cause by incorrect or not present
platform_data.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.
drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: stable@vger.kernel.org # applies to 4.0 (maybe even 3.x)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When some other buffer is immediately copied into allocated region.
Replace calls to kmalloc followed by a memcpy with a direct
call to kmemdup.
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If dvb_attach() fails then we were just printing an error message and
exiting but the memory allocated to state was not released.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
tx-only RC devices do not have a receive buffer.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LIRC_SET_REC_TIMEOUT can fail if the value returned by
LIRC_GET_MIN_TIMEOUT is set due to rounding errors.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current message has some wanted spaces on it:
rc_core: Loaded IR protocol module ir-jvc-decoder, but protocol jvc still not available
Merge it into a single line.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
An RC device which is transmit-only shouldn't have the
LIRC_CAN_REC_MODE2 feature.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The GeekBox ships with a 12 button remote control which seems to use the
NEC protocol. The button keycodes were captured with the "ir-keytable"
tool (ir-keytable -p $PROTOCOL -t; human_button_pusher).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds driver for IR controller on MT7623 SoC.
and should also work on similar Mediatek SoC. Currently
testing successfully on NEC and SONY remote controller
only but it should work on others (lirc, rc-5 and rc-6).
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The loop over the ov2659_formats[] array just a few lines above
verifies that mf->code matches the selected array entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
trivial fix to spelling mistake in err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
trivial fix to spelling mistake in deb_chk message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
trivial fix to spelling mistake in cobalt_info message. Anders Celsius
was the Swedish astronomer.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
trivial fix to spelling mistake of function name in err message,
should be cx24123_pll_calculate instead of cx24123_pll_calcutate.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.
Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().
This use of uninitialized variable has been found by compiling the
kernel with clang.
Fixes: 417d2e507e ("[media] media: platform: add VPFE capture driver
support for AM437X")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add 3840x2160 as valid resolution for the webcam capture input and
adjust the webcam intervals accordingly.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.
Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.
Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.
Fixes: 0e158be0162b ("adv7604: Add DT support")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(One of the scripts)
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_core_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.core=&i@p;
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_core_ops i;
File size before:
text data bss dec hex filename
858 576 0 1434 59a soc_camera/soc_camera_platform.o
File size after:
text data bss dec hex filename
1234 192 0 1426 592 soc_camera/soc_camera_platform.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified.
As it is not initialized either, the return value can be anything.
It is likely that returning the error code was expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD
and two don't. The VFD code is exactly the same in the mainline imon
driver, so that part is easily ported.
The staging driver produces raw IR rather than scancodes for the four
devices, so I've ported the raw IR code from staging to mainline imon.
Now that mainline imon can handle these four devices, lirc_imon is no
longer needed.
Compile tested only.
Signed-off-by: Sean Young <sean@mess.org>
Cc: Venky Raju <dev@venky.ws>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This driver was written using lirc since rc-core did not support
transmitter-only hardware at that time. Now that it does, port
this driver.
Compile tested only.
Signed-off-by: Sean Young <sean@mess.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The ir-spi is a simple device driver which supports the
connection between an IR LED and the MOSI line of an SPI device.
The driver, indeed, uses the SPI framework to stream the raw data
provided by userspace through an rc character device. The chardev
is handled by the LIRC framework and its functionality basically
provides:
- write: the driver gets a pulse/space signal and translates it
to a binary signal that will be streamed to the IR led through
the SPI framework.
- set frequency: sets the frequency whith which the data should
be sent. This is handle with ioctl with the
LIRC_SET_SEND_CARRIER flag (as per lirc documentation)
- set duty cycle: this is also handled with ioctl with the
LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles
of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data.
The character device is created under /dev/lircX name, where X is
and ID assigned by the LIRC framework.
Example of usage:
fd = open("/dev/lirc0", O_RDWR);
if (fd < 0)
return -1;
val = 608000;
ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val);
if (ret < 0)
return -1;
val = 60;
ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val);
if (ret < 0)
return -1;
n = write(fd, buffer, BUF_LEN);
if (n < 0 || n != BUF_LEN)
ret = -1;
close(fd);
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Raw IR transmitters do not need any thread listening for
occurring events. Check the driver type before running the
thread.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.
The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the input device allocation, map and protocol handling to
different functions.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.
This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.
Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Nuvoton-cir utilizes the encoding capabilities of rc-core to convert
scancodes from user space to pulse/space format understood by the
underlying hardware.
Converted samples are then written to the wakeup fifo along with other
necessary configuration to enable wake up functionality.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the s_wakeup_filter callback to the rc-loopback driver, which instead
of setting the filter just feeds the scancode back through the input
device so that it can be verified.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true and
rc_dev::allowed_wakeup_protocols should be set to the raw IR encoders.
We also do not permit the mask to be set as we cannot generate IR
which would match that.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode Sony scancodes as raw events. Sony uses
pulse length rather than pulse distance.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode Sharp scancodes as raw events.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode Sanyo scancodes as raw events.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode JVC scancodes as raw events.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode NEC scancodes as raw events. The
scancode_to_raw is pretty much taken from the img-ir NEC filter()
callback, and modulation uses the pulse distance helper added in a
previous commit.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode RC-6 and RC-6A scancodes as raw events.
The Manchester modulation helper is used several times with various
timings so that RC-6 header preamble, the header, header trailing bit
and the data itself can be modulated correctly.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events.
The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.
The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add IR encoding helper for pulse-distance modulation as used by the NEC
protocol.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode to a form that is more suitable for raw
hardware wake up filters.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
unknown and other are for IR protocols for which we have no decoder,
so the raw IR drivers have no chance of generating them. cec is not
an IR protocol.
Signed-off-by: Sean Young <sean@mess.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that we can select the exact variant of the protocol for wakeup
filter, the winbond-cir can use the wakeup filter rather than module
parameters.
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two different encodings used for nec32:
- The ir-nec-decoder.c decoder treats it as 32 bit msb first.
- The img-ir decoder/encoder, winbond wakeup, dib0700, ir-ctl userspace,
treat nec32 analogous to necx and nec: 4 bytes, each lsb first. So this
format reverses the 4 bytes.
There are arguments to be had for both formats, but we should not use
different formats in different parts of the kernel. Selecting the second
format introduces the least code churn. It does mean that the TiVo keymap
needs updating.
This change was submitted before as "18bc174 [media] media: rc: change
32bit NEC scancode format", which was reverted because it was unclear
what scancode rc drivers produce. There are now more examples of drivers
which produce nec32 in lsb format.
The TiVo keymap is verified against the Nero Liquid TiVo remote. The
keymap is not for the Tivo DVR remote, which uses rc-5.
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We need to valdiate that scancodes are valid for their protocol; an
incorrect necx scancode could actually be a nec scancode, for example.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.
In addition, we need to know the specific variant of the protocol.
In short, these changes are made to the wakeup_protocols sysfs entry:
- list all the protocol variants rather than the protocol groups,
e.g. "nec nec-x nec-32" rather than just "nec".
- only allow one protocol variant to be selected rather than multiple
- wakeup_filter can only be set once a protocol has been selected in
wakeup_protocols.
This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are many variants of extended rc5. This implements the 20 bit
version.
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The 2nd stop bit in rc5 is reused as an inverted 6th command bit in
20 bits rc5x. Currently the rc5x decoder sets the 6th command bit as
an inverted duplicate of the lowest system bit; as a result we do
not have all the command bits.
Note that there are no rc5x keymaps present.
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Both the iguanair and the technotrend usb ir do not do any timeout
handling in hardware, so timeout is entirely done in
ir_raw_event_store_with_filter(). Any sensible timeout value will
do, so allow it to be set using LIRC_SET_REC_TIMEOUT.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
No timeout is generated by serial_ir since the port only generates
interrupts on edges. Some IR protocols like rc6 and rc5 need a trailing
space or timeout so they know there are no more bits coming.
Without it, the current key will only be reported once some more IR
occurs.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These ioctls should not succeed if the device cannot send. Also make it
clear that these ioctls should return the lirc mode, although the actual
value does not change.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since "273b902 [media] lirc_dev: use LIRC_CAN_REC() define" these
ioctls no longer work.
Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LIRC_SET_SEND_CARRIER ioctl should not return the carrier used, it
should return 0.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The d680_dmb keymap has some new new mappings.
Tested-by: Vincent McIntyre <vincent.mcintyre@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I think we can get rid of the spinlock protecting the kthread from being
interrupted by a wakeup in certain parts.
Even with the current implementation of the kthread the only lost wakeup
scenario could happen if the wakeup occurs between the kfifo_len check
and setting the state to TASK_INTERRUPTIBLE.
In the changed version we could lose a wakeup if it occurs between
processing the fifo content and setting the state to TASK_INTERRUPTIBLE.
This scenario is covered by an additional check for available events in
the fifo and setting the state to TASK_RUNNING in this case.
In addition the changed version flushes the kfifo before ending
when the kthread is stopped.
With this patch we gain:
- Get rid of the spinlock
- Simplify code
- Don't grep / release the mutex for each individual event but just once
for the complete fifo content. This reduces overhead if a driver e.g.
triggers processing after writing the content of a hw fifo to the kfifo.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Due to an incorrect condition the last_la used for the initial attempt at
claiming a logical address could be wrong.
The last_la wasn't converted to a mask when ANDing with type2mask, so that
test was broken.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The function has a local variable that points to the media device; use
that instead of finding the media device under the entity.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The function has a local variable that points to the media device; use
that instead of finding the media device under the entity.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use dev_dbg() to tell about the progress of the graph traversal algorithm.
This is intended to make debugging of the algorithm easier.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of double quotes, use single quotes to quote entity names. Using
single quotes is consistent with the English language and is also in line
with the practices across the kernel.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----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=r51U
-----END PGP SIGNATURE-----
Merge tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression on tvp5150 causing failures at input selection and
image glitches
- CEC was moved out of staging for v4.10. Fix some bugs on it while not
too late
- fix a regression on pctv452e caused by VM stack changes
- fix suspend issued with smiapp
- fix a regression on cobalt driver
- fix some warnings and Kconfig issues with some random configs.
* tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
With media_entity_graph_walk_next() getting more and more complicated (and
especially so with has_routing() support added), split the function into
two.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The media_entity_pipeline_start() and media_entity_pipeline_stop()
functions are renamed as media_pipeline_start() and media_pipeline_stop(),
respectively. The reason is two-fold: the pipeline struct is, rightly,
already called media_pipeline (rather than media_entity_pipeline) and what
this really is about is a pipeline. A pipeline consists of entities ---
and, well, other objects embedded in these entities.
As the pipeline object will be in the future moved from entities to pads
in order to support multiple pipelines through a single entity, do the
renaming now.
Similarly, functions operating on struct media_entity_graph as well as the
struct itself are renamed by dropping the "entity_" part from the prefix
of the function family and the data structure. The graph traversal which
is what the functions are about is not specifically about entities only
and will operate on pads for the same reason as the media pipeline.
The patch has been generated using the following command:
git grep -l media_entity |xargs perl -i -pe '
s/media_entity_pipeline/media_pipeline/g;
s/media_entity_graph/media_graph/g'
And a few manual edits related to line start alignment and line wrapping.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Commit 3801bc7d1b ("[media] media: Media Controller fix to not let
stream_count go negative") added a sanity check for negative stream_count,
but a failure of the check remained silent. Make sure the failure is
noticed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There's a sanity check for the stream count remaining positive or zero on
error path, but instead of performing the check on the traversed entity it
is performed on the entity where traversal ends. Fix this.
Fixes: commit 3801bc7d1b ("[media] media: Media Controller fix to not let stream_count go negative")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.
The patch has been created with the following command without manual edits:
git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
When the functions replaced media entity types, the range which was
allowed for the types was incorrect. This meant that media entity types
for specific devices were not passed correctly to the userspace through
MEDIA_IOC_ENUM_ENTITIES. Fix it.
Fixes: commit b2cd27448b ("[media] media-device: map new functions into old types for legacy API")
Reported-and-tested-by: Antti Laakso <antti.laakso@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # For v4.5 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adds PLP ID filtering for DVB-T2.
It is untested as I don't have any signal having PLP ID other than 0.
There is only 2 extra registers, 0x32 and 0x36 on bank2, that are
programmed for DVB-T2 but not for DVB-T and all the rest are
programmed similarly - so it is likely PLP.
Pridvorov reported successfully testing it in Russia with m-PLP streams,
on both Vladivostok and Moskow.
Tested-by: "Придворов Андрей (Pridvorov Andrey)" <ua0lnj@bk.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYYGCgAAoJEHm+PkMAQRiGjVMH/R1WKLSCVyU2QboSTZVyBGqU
6E42pMalPNaY72uxf29ZmUzds1uV5KyFn7OntsyD4qc+sQb2wxG5PvMSYAsL7HKN
lTFiW738zC9Hfx8MzC/fHLGm/7HTHpPFndZJkDOJjIPnS0MeTHAmOFM+RwCRq+px
5uvRHV4Z8yibHtijET6GqCywV0gw/uyXCi6xJfJNAspnj3hsm3ZXKJ0JPvP2ja+V
yhdnWYHDEQwRs6FyNtIWnfjH92XilVn4KcOtwnb1pFahALiTmmVqJVMiGartagqJ
fPRw98B3YHwmZpEc2SDbXaZi36WLu4hcWvvDa22SN/srXwYIzzblEwuNq1+fiBw=
=X7z+
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc1' into patchwork
Linux 4.10-rc1
* tag 'v4.10-rc1': (11427 commits)
Linux 4.10-rc1
powerpc: Fix build warning on 32-bit PPC
avoid spurious "may be used uninitialized" warning
mm: add PageWaiters indicating tasks are waiting for a page bit
mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked
ktime: Get rid of ktime_equal()
ktime: Cleanup ktime_set() usage
ktime: Get rid of the union
clocksource: Use a plain u64 instead of cycle_t
irqchip/armada-xp: Consolidate hotplug state space
irqchip/gic: Consolidate hotplug state space
coresight/etm3/4x: Consolidate hotplug state space
cpu/hotplug: Cleanup state names
cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
staging/lustre/libcfs: Convert to hotplug state machine
scsi/bnx2i: Convert to hotplug state machine
scsi/bnx2fc: Convert to hotplug state machine
cpu/hotplug: Prevent overwriting of callbacks
x86/msr: Remove bogus cleanup from the error path
bus: arm-ccn: Prevent hotplug callback leak
...
* patchwork:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A rare randconfig build failure shows up in this driver when
the CRC32 helper is not there:
drivers/media/built-in.o: In function `s5k4ecgx_s_power':
s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le'
This adds the 'select' that all other users of this function have.
Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With gcc-5 or higher on x86, we can get a bogus warning in the
dvb-net code:
drivers/media/dvb-core/dvb_net.c: In function 'dvb_net_ule':
arch/x86/include/asm/string_32.h:78:22: error: '*((void *)&dest_addr+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The problem here is that gcc doesn't track all of the conditions
to prove it can't end up copying uninitialized data.
This changes the logic around so we zero out the destination
address earlier when we determine that it is not set here.
This allows the compiler to figure it out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The s_stream() handler incorrectly writes the whole MISC_CTL register to
enable or disable the outputs, overriding the output pinmuxing
configuration. Fix it to only touch the output enable bits.
The CONF_SHARED_PIN register is also written by the same function,
resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on
the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this
is obviously incorrect, and breaks operation on other devices. Fix it by
removing the write.
Cc: stable@vger.kernel.org # For Kernel 4.5 and upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently
depending on whether the input is an S-Video or composite signal. The
comment that explains the logic doesn't reflect the code. It appears
that the comment is incorrect, as disabling the output data bus in
composite mode makes no sense. Update the comment to match the code.
While at it define macros for the MISC_CTL register bits, the code is
too confusing with numerical values.
Cc: stable@vger.kernel.org # For Kernel 4.5 and upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tvp5150 doesn't support format setting through the subdev pad API
and thus implements the set format handler as a get format operation.
The single handler, tvp5150_fill_fmt(), resets the device by calling
tvp5150_reset(). This causes malfunction as the device can be reset at
will, possibly from userspace when the subdev userspace API is enabled.
The reset call was added in commit ec2c4f3f93 ("[media] media:
tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the
device to a known state before detecting the current TV standard.
However, the get format handler doesn't access the hardware to get the
TV standard since commit 963ddc63e2 ("[media] media: tvp5150: Add
cropping support"). There is thus no need to reset the device when
getting the format.
However, removing the tvp5150_reset() from the get/set format handlers
results in the function not being called at all if the bridge driver
doesn't use the .reset() operation. The operation is nowadays abused and
shouldn't be used, so shouldn't expect bridge drivers to call it. To
make sure the device is properly initialize, move the reset call from
the format handlers to the probe function.
Cc: stable@vger.kernel.org # For Kernel 4.5 and upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
commit 73d5c5c864 ("[media] pctv452e: don't do DMA on stack") caused
a NULL pointer dereference which occurs when dvb_usb_init()
calls dvb_usb_device_power_ctrl() for the first time, before the
frontend has been attached. It also caused a recursive deadlock because
tt3650_ci_msg_locked() has already locked the mutex.
So, partially revert it, but move the buffer to the heap
(DMA capable), not to the stack (may not be DMA capable).
Instead of sharing one buffer which needs mutex protection,
do a new heap allocation for each call.
Fixes: commit 73d5c5c864 ("[media] pctv452e: don't do DMA on stack")
Cc: stable@vger.kernel.org # For Kernel 4.9
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simply the interrupt setup by using the new PCI layer helpers.
Despite using pci_enable_msi_range, this driver was only requesting a
single MSI vector anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This race was discovered by running cec-compliance -A with the cec module debug
parameter set to 2: suddenly the test would fail.
It turns out that this happens when the test configures the adapter in
non-blocking mode, then it waits for the CEC_EVENT_STATE_CHANGE event and once
the event is received it unconfigures the adapter.
What happened was that the unconfigure was executed while the configure was
still transmitting the Report Features and Report Physical Address messages.
This messed up the internal state of the cec_adapter.
The fix is to transmit those messages with the adap->lock mutex held (this will
just queue them up in the internal transmit queue, and not actually transmit
anything yet). Only unlock the mutex once everything is done. The main thread
will dequeue the messages from the internal transmit queue and transmit them
one by one, unless an unconfigure was done, and in that case any messages are
just dropped.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It's only a small function and this makes it easier to switch to
transmitting the message with adap->lock held in the next patch.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
