Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having a local variable of 1024 bytes on 64-bit architectures is a bit
too much, and I ran into this warning while trying to see what functions
use the largest stack:
drivers/staging/fbtft/fbtft-sysfs.c: In function 'store_gamma_curve':
drivers/staging/fbtft/fbtft-sysfs.c:132:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As there is no need for 64-bit gamma values (on 32-bit architectures,
we don't use those either), I'm changing the type from 'unsigned long'
to 'u32' here, which cuts the required space in half everywhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following errors:
Use 4 digit octal (0777) not decimal permissions
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple entries for ili9225 display defined in
flexfb_chip_table array. remove duplicate entries and
keep single entry.
Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor write_vmem() for sake of readability.
While here, fix indentation in one comment.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is 64x48 display exists. In order to support that set multiplexer
to 48 pixels and window address to proper position in the graphic display
data RAM.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kstrto*() functions return proper error code.
Do propogate it to the user.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to duplicate what SPI core already does, i.e. mapping buffers
for DMA capable transfers.
Remove all related pices of code.
Note, that code, besides its redundancy, was buggy: DMA address potentially can
be 0, SPI slave device has nothing to do with DMA capable device properties and
DMA mask in particular.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all, fbtft in current state doesn't allow to override GPIOs to be
optional, like "reset" one. It might be a bug somewhere, but rather out of
scope of this fix.
Second, not all GPIOs available on the board would be SoC based, some of them
might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus
any communication with them might sleep.
Besides that using udelay() and mdelay() is kinda resource wasteful.
Summarize all of the above, convert fbtft_reset() function to non-atomic
variant by using gpio_set_value_cansleep(), usleep_range(), and msleep().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These changes where identified by checkpatch.pl as needed changes to
align the code with the linux development coding style. The several
lines of text where aligned with the precending parenthesis.
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning
WARNING: line over 80 characters
Signed-off-by: Maninder Singh <maninder.s2@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ERROR: Use 4 digit octal (0777) not decimal permissions
This error was detected by checkpatch.pl
Signed-off-by: Nadim Almas <nadim.902@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
$
After this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
alias: platform:flexpfb
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the fb_agm1264k-fl.c file that fixes up the following
issue:
WARNING: Too many leading tabs - consider code refactoring
Add new function iterate_diffusion_matrix() to refactor a piece of code
inside write_vmem().
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arrays use -1, -2, and -3 as initiators for various types of
writes to initialize hardware.
No values are used that conflict with using these arrays as s16
instead of int and reducing overall data is good.
$ size drivers/staging/fbtft/built-in.o*
text data bss dec hex filename
116120 32872 4152 153144 25638 drivers/staging/fbtft/built-in.o.new
116104 36344 6200 158648 26bb8 drivers/staging/fbtft/built-in.o.old
Miscellaneous:
o Realign some of the arrays to make reading a bit easier
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves all the following CHECKs caught by checkpatch.pl
CHECK: Alignment should match open parenthesis
Signed-off-by: Harman Kalra <harman4linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 367e8560e8 introduced a bug
in fbtft-core where fps is always 0, this is because variable
update_time is not assigned correctly.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Fixes: 367e8560e8 ("Staging: fbtbt: Replace timespec with ktime_t")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the following checkpatch warnings (task #10 of eudyptula challenge):
- NULL comparison rewritten to use '!' operator
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use !x instead of x == NULL. This patch was found by checkpatch.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add spaces around << to fix the checkpatch issue, spaces preferred
around that '<<'.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move && up to the previous line, to fix the checkpatch issue Logical
continuations should be on the previous line.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: Statements should start on a tabstop
Signed-off-by: Prit Raj <prit.adra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace unsigned by unsigned int in fbtft driver. Issue found by
checkpatch.
Signed-off-by: Ming Yang <minos.future@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
txbuflen can be set to arbitrary value by user and it is also set
automagically to the maximum transfer size of the SPI master controller.
Do not allocate the buffer when larger than vmem. When my SPI master
controller reports maximum transfer size 16M the probe of fbtft fails.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No space is necessary after cast.This problem is found by checkpatch.pl script.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No space is necessary after cast.This patch is found by checkpatch.pl script.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No space is necessary after cast.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace devm_kzalloc with devm_kcalloc to ensure there are no integer
overflows from the multiplication of a number * sizeof
The following Coccinelle semantic patch was used to make this change:
//<smpl>
@@
expression dev,E1,E2,E3,E4;
@@
- devm_kzalloc(dev,E1*E2*sizeof(E3),E4)
+ devm_kcalloc(dev,E1*E2,sizeof(E3),E4)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unnecessary spi_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.
The Coccinelle semantic patch used to make this change is as follows:
@@
struct spi_device *spi;
@@
- spi_set_drvdata(spi, NULL);
// </smpl>
Due to this removal, variable `spi` was unused so dropped `spi`
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use macro min() to get the minimum of two values for
brevity and readability.
Found using Coccinelle:
@@ type T; T x; T y; @@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the required leading * on subsequent lines as well as
move the */ on a separate line. Checkpatch found this issue.
Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the macro defining constant ROWxCOL into ROW_X_COL to remove
checkpatch check concerning use of CamelCase and to achieve better
readability.
CHECK: Avoid CamelCase: <ROWxCOL>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omit the whitespace after '{' brace as suggested by checkpatch.
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Insert the required whitespace after the function declaration as
suggested by checkpatch.
CHECK: Please use a blank line after function/struct/union/enum
declarations
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.
CHECK: Alignment should match open parenthesis
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
