req->work might be already initialised by the time it gets into
__io_arm_poll_handler(), which will corrupt it by using fields that are
in an union with req->work. Luckily, the only side effect is missing
put_creds(). Clean req->work before going there.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOSQE_ASYNC branch of io_queue_sqe() is another place where an
unitialised req->work can be accessed (i.e. prior io_req_init_async()).
Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently filter these for timeout_remove/async_cancel/files_update,
but we only should be filtering for fixed file and buffer select. This
also causes a second read of sqe->flags, which isn't needed.
Just check req->flags for the relevant bits. This then allows these
commands to be used in links, for example, like everything else.
Signed-off-by: Daniele Albano <d.albano@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double poll additions were centered around doing POLL_ADD on file
descriptors that use more than one waitqueue (typically one for read,
one for write) when being polled. However, it can also end up being
triggered for when we use poll triggered retry. For that case, we cannot
safely use req->io, as that could be used by the request type itself.
Add a second io_poll_iocb pointer in the structure we allocate for poll
based retry, and ensure we use the right one from the two paths.
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_recvmsg() doesn't free memory allocated for struct io_buffer. This can
causes a leak when used with automatic buffer selection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
59960b9deb ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.
Fixes: 7cdaf587de ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure to set msg.msg_name for the async portion of send/recvmsg,
as the header copy will copy to/from it.
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently account the memory after the exit work has been run, but
that leaves a gap where a process has closed its ring and until the
memory has been accounted as freed. If the memlocked ulimit is
borderline, then that can introduce spurious setup errors returning
-ENOMEM because the free work hasn't been run yet.
Account this as freed when we close the ring, as not to expose a tiny
gap where setting up a new ring can fail.
Fixes: 85faa7b834 ("io_uring: punt final io_ring_ctx wait-and-free to workqueue")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When switching to TWA_SIGNAL for task_work notifications, we also made
any signal based condition in io_cqring_wait() return -ERESTARTSYS.
This breaks applications that rely on using signals to abort someone
waiting for events.
Check if we have a signal pending because of queued task_work, and
repeat the signal check once we've run the task_work. This provides a
reliable way of telling the two apart.
Additionally, only use TWA_SIGNAL if we are using an eventfd. If not,
we don't have the dependency situation described in the original commit,
and we can get by with just using TWA_RESUME like we previously did.
Fixes: ce593a6c48 ("io_uring: use signal based task_work running")
Cc: stable@vger.kernel.org # v5.7
Reported-by: Andres Freund <andres@anarazel.de>
Tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.
This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.
Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_do_iopoll() won't do anything with a request unless
req->iopoll_completed is set. So io_complete_rw_iopoll() has to set
it, otherwise io_do_iopoll() will poll a file again and again even
though the request of interest was completed long time ago.
Also, remove -EAGAIN check from io_issue_sqe() as it races with
the changed lines. The request will take the long way and be
resubmitted from io_iopoll*().
io_kiocb's result and iopoll_completed")
Fixes: bbde017a32 ("io_uring: add memory barrier to synchronize
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the user consumes and generates sqe at a fast rate,
io_sqring_entries can always get sqe, and ret will not be equal to -EBUSY,
so that io_sq_thread will never call cond_resched or schedule, and then
we will get the following system error prompt:
rcu: INFO: rcu_sched self-detected stall on CPU
or
watchdog: BUG: soft lockup-CPU#23 stuck for 112s! [io_uring-sq:1863]
This patch checks whether need to call cond_resched() by checking
the need_resched() function every cycle.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_read() or io_write(), when io request is submitted successfully,
it'll go through the below sequence:
kfree(iovec);
req->flags &= ~REQ_F_NEED_CLEANUP;
return ret;
But clearing REQ_F_NEED_CLEANUP might be unsafe. The io request may
already have been completed, and then io_complete_rw_iopoll()
and io_complete_rw() will be called, both of which will also modify
req->flags if needed. This causes a race condition, with concurrent
non-atomic modification of req->flags.
To eliminate this race, in io_read() or io_write(), if io request is
submitted successfully, we don't remove REQ_F_NEED_CLEANUP flag. If
REQ_F_NEED_CLEANUP is set, we'll leave __io_req_aux_free() to the
iovec cleanup work correspondingly.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're doing polled IO and end up having requests being submitted
async, then completions can come in while we're waiting for refs to
drop. We need to reap these manually, as nobody else will be looking
for them.
Break the wait into 1/20th of a second time waits, and check for done
poll completions if we time out. Otherwise we can have done poll
completions sitting in ctx->poll_list, which needs us to reap them but
we're just waiting for them.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're unlucky with timing, we could be running task_work after
having dropped the memory context in the sq thread. Since dropping
the context requires a runnable task state, we cannot reliably drop
it as part of our check-for-work loop in io_sq_thread(). Instead,
abstract out the mm acquire for the sq thread into a helper, and call
it from the async task work handler.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll
completed are two independent store operations, to ensure that once
iopoll_completed is ture and then req->result must been perceived by
the cpu executing io_do_iopoll(), proper memory barrier should be used.
And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is,
we'll need to issue this io request using io-wq again. In order to just
issue a single smp_rmb() on the completion side, move the re-submit work
to io_iopoll_complete().
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
[axboe: don't set ->iopoll_completed for -EAGAIN retry]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In IOPOLL mode, for EAGAIN error, we'll try to submit io request
again using io-wq, so don't fail rest of links if this io request
has links.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For an exiting process it tries to cancel all its inflight requests. Use
req->task to match such instead of work.pid. We always have req->task
set, and it will be valid because we're matching only current exiting
task.
Also, remove work.pid and everything related, it's useless now.
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There will be multiple places where req->task is used, so refcount-pin
it lazily with introduced *io_{get,put}_req_task(). We need to always
have valid ->task for cancellation reasons, but don't care about pinning
it in some cases. That's why it sets req->task in io_req_init() and
implements get/put laziness with a flag.
This also removes using @current from polling io_arm_poll_handler(),
etc., but doesn't change observable behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of waiting for each request one by one, first try to cancel all
of them in a batched manner, and then go over inflight_list/etc to reap
leftovers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a process is going away, io_uring_flush() will cancel only 1
request with a matching pid. Cancel all of them
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for cancelling all io-wq works matching a predicate.
It isn't used yet, so no change in observable behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=evRQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.8-2020-06-11' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few late stragglers in here. In particular:
- Validate full range for provided buffers (Bijan)
- Fix bad use of kfree() in buffer registration failure (Denis)
- Don't allow close of ring itself, it's not fully safe. Making it
fully safe would require making the system call more expensive,
which isn't worth it.
- Buffer selection fix
- Regression fix for O_NONBLOCK retry
- Make IORING_OP_ACCEPT honor O_NONBLOCK (Jiufei)
- Restrict opcode handling for SQ/IOPOLL (Pavel)
- io-wq work handling cleanups and improvements (Pavel, Xiaoguang)
- IOPOLL race fix (Xiaoguang)"
* tag 'io_uring-5.8-2020-06-11' of git://git.kernel.dk/linux-block:
io_uring: fix io_kiocb.flags modification race in IOPOLL mode
io_uring: check file O_NONBLOCK state for accept
io_uring: avoid unnecessary io_wq_work copy for fast poll feature
io_uring: avoid whole io_wq_work copy for requests completed inline
io_uring: allow O_NONBLOCK async retry
io_wq: add per-wq work handler instead of per work
io_uring: don't arm a timeout through work.func
io_uring: remove custom ->func handlers
io_uring: don't derive close state from ->func
io_uring: use kvfree() in io_sqe_buffer_register()
io_uring: validate the full range of provided buffers for access
io_uring: re-set iov base/len for buffer select retry
io_uring: move send/recv IOPOLL check into prep
io_uring: deduplicate io_openat{,2}_prep()
io_uring: do build_open_how() only once
io_uring: fix {SQ,IO}POLL with unsupported opcodes
io_uring: disallow close of ring itself
While testing io_uring in arm, we found sometimes io_sq_thread() keeps
polling io requests even though there are not inflight io requests in
block layer. After some investigations, found a possible race about
io_kiocb.flags, see below race codes:
1) in the end of io_write() or io_read()
req->flags &= ~REQ_F_NEED_CLEANUP;
kfree(iovec);
return ret;
2) in io_complete_rw_iopoll()
if (res != -EAGAIN)
req->flags |= REQ_F_IOPOLL_COMPLETED;
In IOPOLL mode, io requests still maybe completed by interrupt, then
above codes are not safe, concurrent modifications to req->flags, which
is not protected by lock or is not atomic modifications. I also had
disassemble io_complete_rw_iopoll() in arm:
req->flags |= REQ_F_IOPOLL_COMPLETED;
0xffff000008387b18 <+76>: ldr w0, [x19,#104]
0xffff000008387b1c <+80>: orr w0, w0, #0x1000
0xffff000008387b20 <+84>: str w0, [x19,#104]
Seems that the "req->flags |= REQ_F_IOPOLL_COMPLETED;" is load and
modification, two instructions, which obviously is not atomic.
To fix this issue, add a new iopoll_completed in io_kiocb to indicate
whether io request is completed.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some architectures like arm64 and s390 require USER_DS to be set for
kernel threads to access user address space, which is the whole purpose of
kthread_use_mm, but other like x86 don't. That has lead to a huge mess
where some callers are fixed up once they are tested on said
architectures, while others linger around and yet other like io_uring try
to do "clever" optimizations for what usually is just a trivial asignment
to a member in the thread_struct for most architectures.
Make kthread_use_mm set USER_DS, and kthread_unuse_mm restore to the
previous value instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "improve use_mm / unuse_mm", v2.
This series improves the use_mm / unuse_mm interface by better documenting
the assumptions, and my taking the set_fs manipulations spread over the
callers into the core API.
This patch (of 3):
Use the proper API instead.
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
These helpers are only for use with kernel threads, and I will tie them
more into the kthread infrastructure going forward. Also move the
prototypes to kthread.h - mmu_context.h was a little weird to start with
as it otherwise contains very low-level MM bits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200416053158.586887-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200404094101.672954-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the socket is O_NONBLOCK, we should complete the accept request
with -EAGAIN when data is not ready.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Basically IORING_OP_POLL_ADD command and async armed poll handlers
for regular commands don't touch io_wq_work, so only REQ_F_WORK_INITIALIZED
is set, can we do io_wq_work copy and restore.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If requests can be submitted and completed inline, we don't need to
initialize whole io_wq_work in io_init_req(), which is an expensive
operation, add a new 'REQ_F_WORK_INITIALIZED' to determine whether
io_wq_work is initialized and add a helper io_req_init_async(), users
must call io_req_init_async() for the first time touching any members
of io_wq_work.
I use /dev/nullb0 to evaluate performance improvement in my physical
machine:
modprobe null_blk nr_devices=1 completion_nsec=0
sudo taskset -c 60 fio -name=fiotest -filename=/dev/nullb0 -iodepth=128
-thread -rw=read -ioengine=io_uring -direct=1 -bs=4k -size=100G -numjobs=1
-time_based -runtime=120
before this patch:
Run status group 0 (all jobs):
READ: bw=724MiB/s (759MB/s), 724MiB/s-724MiB/s (759MB/s-759MB/s),
io=84.8GiB (91.1GB), run=120001-120001msec
With this patch:
Run status group 0 (all jobs):
READ: bw=761MiB/s (798MB/s), 761MiB/s-761MiB/s (798MB/s-798MB/s),
io=89.2GiB (95.8GB), run=120001-120001msec
About 5% improvement.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can assume that O_NONBLOCK is always honored, even if we don't
have a ->read/write_iter() for the file type. Also unify the read/write
checking for allowing async punt, having the write side factoring in the
REQ_F_NOWAIT flag as well.
Cc: stable@vger.kernel.org
Fixes: 490e89676a ("io_uring: only force async punt if poll based retry can't handle it")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring is the only user of io-wq, and now it uses only io-wq callback
for all its requests, namely io_wq_submit_work(). Instead of storing
work->runner callback in each instance of io_wq_work, keep it in io-wq
itself.
pros:
- reduces io_wq_work size
- more robust -- ->func won't be invalidated with mem{cpy,set}(req)
- helps other work
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_link_work_cb() -- the last custom work.func.
Not the prettiest thing, but works. Instead of queueing a linked timeout
in io_link_work_cb() mark a request with REQ_F_QUEUE_TIMEOUT and do
enqueueing based on the flag in io_wq_submit_work().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation of getting rid of work.func, this removes almost all
custom instances of it, leaving only io_wq_submit_work() and
io_link_work_cb(). And the last one will be dealt later.
Nothing fancy, just routinely remove *_finish() function and inline
what's left. E.g. remove io_fsync_finish() + inline __io_fsync() into
io_fsync().
As no users of io_req_cancelled() are left, delete it as well. The patch
adds extra switch lookup on cold-ish path, but that's overweighted by
nice diffstat and other benefits of the following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Relying on having a specific work.func is dangerous, even if an opcode
handler set it itself. E.g. io_wq_assign_next() can modify it.
io_close() sets a custom work.func to indicate that
__close_fd_get_file() was already called. Fortunately, there is no bugs
with io_wq_assign_next() and close yet.
Still, do it safe and always be prepared to be called through
io_wq_submit_work(). Zero req->close.put_file in prep, and call
__close_fd_get_file() IFF it's NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Account for the number of provided buffers when validating the address
range.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have the buffer selected, but we should set the iter list
again.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fail recv/send in case of IORING_SETUP_IOPOLL earlier during prep,
so it'd be done only once. Removes duplication as well
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_openat_prep() and io_openat2_prep() are identical except for how
struct open_how is built. Deduplicate it with a helper.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
build_open_how() is just adjusting open_flags/mode. Do it once during
prep. It looks better than storing raw values for the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_IOPOLL is defined only for read/write, other opcodes should
be disallowed, otherwise it'll get an error as below. Also refuse
open/close with SQPOLL, as the polling thread wouldn't know which file
table to use.
RIP: 0010:io_iopoll_getevents+0x111/0x5a0
Call Trace:
? _raw_spin_unlock_irqrestore+0x24/0x40
? do_send_sig_info+0x64/0x90
io_iopoll_reap_events.part.0+0x5e/0xa0
io_ring_ctx_wait_and_kill+0x132/0x1c0
io_uring_release+0x20/0x30
__fput+0xcd/0x230
____fput+0xe/0x10
task_work_run+0x67/0xa0
do_exit+0x353/0xb10
? handle_mm_fault+0xd4/0x200
? syscall_trace_enter+0x18c/0x2c0
do_group_exit+0x43/0xa0
__x64_sys_exit_group+0x18/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: allow provide/remove buffers and files update]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit enabled this functionality, which also enabled O_PATH
to work correctly with io_uring. But we can't safely close the ring
itself, as the file handle isn't reference counted inside
io_uring_enter(). Instead of jumping through hoops to enable ring
closure, add a "soft" ->needs_file option, ->needs_file_no_error. This
enables O_PATH file descriptors to work, but still catches the case of
trying to close the ring itself.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 904fbcb115 ("io_uring: remove 'fd is io_uring' from close path")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov