Remove blank line to resolve checkpatch.pl issue:
CHECK: Blank lines aren't necessary before a close brace '}'
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some parameters are aligned with parentheses.
Some parentheses was opened at end of line.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Proper byte order was completely disregarded for multi byte data shared
between AP and module (and APB1). Fix this.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mixer control->info call back function checks for -ve values to rebase
min and max values. However, le32 variable is used to fetch values from
GB module FW. Thus negative value checking is not required. Fix this!!
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix coding style issue caught by checkpatch.pl related to the following
warning:
- "CHECK: spaces preferred around that '*' (ctx:VxV) "
Signed-off-by: Emmanuil Chatzipetru <chatzi.emanuel@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a blank line after a declaration. Error found by checkpatch.
Signed-off-by: Elizabeth Ferdman <gnudevliz@gmail.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, if info is null, the dev_err message is dereferencing an
uninitialized module pointer. Instead, it should use codec->dev pointer
in dev_err call and better align with other err msg in this function.
Also, ret variable might be used uninitialized in a specific case.
Avoid using it this way.
Found using static analysis with cppcheck:
Checking drivers/staging/greybus/audio_topology.c...
[drivers/staging/greybus/audio_topology.c:175]: (error) Uninitialized
variable: module
[drivers/staging/greybus/audio_topology.c:495]: (error) Uninitialized
variable: ret
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate unneeded parentheses around the right hand side of an assignment.
Coccinelle semantic patch used:
@@
expression e1, e2;
identifier v;
@@
(
v = (e1 == e2)
|
v = (e1 != e2)
|
v = (e1 <= e2)
|
v = (e1 >= e2)
|
v =
- (
e1
- )
)
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added extra fields namely jack_mask & button_mask for each module_info.
These fields are required while registering jack & reporting jack
events.
Earlier, these were hard coded values assuming fixed capabilities say
HEADSET, LINEOUT, etc. supported by GB-codec driver. Now these are
computed dynamically based on module's jack capability shared via
topology data.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
snd_jack will be registered based on real capabilities shared by
module's FW instead of parsing widgets and register it with fixed
capabilities. Remove module_info->num_jack, since it is no more
required.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
While releasing memory during error path exit, invalid memory pointer
was used for dapm_routes. Use a valid one.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
While mapping control id to define DAPM routes, invalid control index
may cause kernel oops. Add extra check to validate index while mapping
names to control_id.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Earlier, module path was enabled based on module's control switch e.g.
'SPK Amp switch'. Thus widget's name was sufficient to parse and
identify the direction. Now individual modules' path will be enabled
based on AIF widget status. So, it is required to get complete widget
details, say w->type is used to identify direction (playback/capture)
and w->sname is used to identify module's DATA connection used for
communication via greybus.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There's an issue that the userspace is not able to control both the
enumerated control and DAPM widget when audio bundle is in the SUSPEND
state. This patch fixes the issue by adding pm_runtime_get/put() calls
for the both controls.
Testing Done:
- Use tinymix to get and put both enumerated control and DAPM widget as
the followings, and observe audio bundle is able to wake up from
suspend.
$ tinymix "GB 3 PB source" 1
$ tinymix "GB 3 PB source"
GB 3 PB source: AIF1 >AIF2
$ tinymix "GB 3 AIF1_RX MUX" 2
$ tinymix "GB 3 AIF1_RX MUX"
GB 3 AIF1_RX MUX: Stereo Left >Right
Reported-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Fix following compile warning by staticizing gb_generate_enum_strings().
greybus/audio_topology.c:134:12: warning: symbol 'gb_generate_enum_strings' was not declared. Should it be static?
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add runtime pm support to audio protocol device class driver.
Testing Done:
- Use white speaker module and check the interface is autosuspended when
it's idle and resumed when playback audio
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Added .get/.set callback and relevant changes in parser to enable
enumerated control support for kcontrols and DAPM widget controls.
Currently, it is limited to enumerated strings only.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Size of control elements vary in case of enumerated controls. As a
preparation to enable enumerated control in topology parser, this patch
uses csize while parsing controls & wsize while parsing widgets & its
control to update next pointer.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Additional warning message added to notify in case above layer tries to
access widget that is already removed from the list.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
This API is used by enumerated controls .get/.set callback functions to
fetch control id associated with a widget.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Earlier I have shared a patch to rate limit err messages in audio_codec
driver. However, missed to include suggestion from Mark to do similar
changes in audio bundle & topology parser as well. Doing it now.
Testing Done: Compile tested
Fixes: 4cb3d109e5fc ("audio: Ratelimit err messages")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Added warning message in find_gb_module(). This will help to identify
invalid mixer control/widget modification triggered from above layer.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Device type info shared to above HAL is currently hard coded
to SPK only. Actual device type is identifed while parsing
widget types from topology FW shared by codec module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Register jack with ASoC sound card in case audio module
populates it via codec FW. Currently, only a single jack
with 4 buttons can be registered for each module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We have single I2S port via APB1 for communication with all
audio modules. Thus, we should register single codec driver
and manage all individual audio modules internally within
this driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
there is race condition between _disconnect() request &
stop_trigger() in case of abrupt module removal.
And sometimes this can lead to deadlock while acquiring
codec_info->lock.
To avoid such situation, atomic variable is used to maintain
codec connected state.
During dai operations (trigger, shutdown, etc.), 'is_connected'
variable is validated to avoid unnecessary lock acquire in
case module already removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
audio codec driver is now moved to bundle driver approach.
This resolved many race conditions related to audio mgmt &
data connection init/exit sequence.
Thus, a lot of helper functions can now be safely removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Convert the legacy audio management and data protocol drivers to a
bundle driver.
The Audio bundle driver can support a single management and any number
of data cports, and so we expect multiple data cports to be present for
the bundle during initialization.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Replace unnecessary dev_err msg with dev_dbg.
Same were added during development to trace topology
parser progress.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
For each GB codec module inserted, DAPM widgets, kcontrols, routes
and DAIs can be fetched through greybus in a binary chunk and parsed
locally to create & populate DAPM graph for the specific module.
It is required by each codec module to populate a minimum set of
kcontrols with fixed names to support basic audio usecase.
To support advanced features of codec module, the same can be polpulated
with existing topology parser. However, to use them for different usecase
separate mechanism (may be via MSP) is required to inform userspace about
their configuration value & enable/disable sequence.
ToDos:
Currently, support for enumerated kcontrol/dapm control is hardcoded.
Need to add complete logic within the parser.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
