When debugging is enabled, we allocate a buffer of PEB size for
various debugging purposes. However, now all users of this buffer
are gone and we can safely remove it and save 128KiB or more RAM.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'dbg_dump_leb()', dynamically allocate it when needed. The intend
is to get rid of the pre-allocated 'c->dbg->buf' buffer and save
128KiB of RAM (or more if PEB size is larger). Indeed, currently we
allocate this memory even if the user never enables any self-check,
which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Remove debug message level and debug checks Kconfig options as they
proved to be useless anyway. We have sysfs interface which we can
use for fine-grained debugging messages and checks selection, see
Documentation/filesystems/ubifs.txt for mode details.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: do not allocate unneeded scan buffer
UBIFS: do not forget to cancel timers
UBIFS: remove a bit of unneeded code
UBIFS: add a commentary about log recovery
UBIFS: avoid kernel error if ubifs superblock read fails
UBIFS: introduce new flags for RO mounts
UBIFS: introduce new flag for RO due to errors
UBIFS: check return code of pnode_lookup
UBIFS: check return code of ubifs_lpt_lookup
UBIFS: improve error reporting when reading bad node
UBIFS: introduce list sorting debugging checks
UBIFS: fix assertion warnings in comparison function
UBIFS: mark unused key objects as invalid
UBIFS: do not write rubbish into truncation scanning node
UBIFS: improve assertion in node comparison functions
UBIFS: do not use key type in list_sort
UBIFS: do not look up truncation nodes
UBIFS: fix assertion warning
UBIFS: do not treat ENOSPC specially
UBIFS: switch to RO mode after synchronizing
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The UBIFS bug in the GC list sorting comparison functions inspired
me to write internal debugging check functions which verify that
the list of nodes is sorted properly.
So, this patch implements 2 new debugging functions:
o 'dbg_check_data_nodes_order()' - check order of data nodes list
o 'dbg_check_nondata_nodes_order()' - check order of non-data nodes list
The debugging functions are executed only if general UBIFS debugging checks are
enabled. And they are compiled out if UBIFS debugging is disabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Return the PTR_ERR of the correct pointer. This fixes the debugging code.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
In 'dbg_check_space_info()' we want to dump current lprops statistics,
but actually dump old statistics. Fix this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Improve 'dbg_dump_lprop()' and print dark and dead space there,
decode flags, and journal heads.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
At the moment UBIFS print large and scary error messages and
flash dumps in case of nearly any corruption, even if it is
a recoverable corruption. For example, if the master node is
corrupted, ubifs_scan() prints error dumps, then UBIFS recovers
just fine and goes on.
This patch makes UBIFS print scary error messages only in
real cases, which are not recoverable. It adds 'quiet' argument
to the 'ubifs_scan()' function, so the caller may ask 'ubi_scan()'
not to print error messages if the caller is able to do recovery.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
We observe space corrupted accounting when re-mounting. So add some
debbugging checks to catch problems like this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We cannot use ubifs_err() macro with DBGKEY() and DBGKEY1(),
because this is racy and holding dbg_lock is needed. Use
dbg_err() instead, which does have the lock held.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
These are mostly long lines and wrong indentation warning
fixes. But also there are two volatile variables and
checkpatch.pl complains about them:
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gc_seq;
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gced_lnum;
Well, we anyway use smp_wmb() for c->gc_seq and c->gced_lnum, so
these 'volatile' modifiers can be just dropped.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We need to have a possibility to see various UBIFS variables
and ask UBIFS to dump various information. Debugfs is what
we need.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Introduce a new data structure which contains all debugging
stuff inside. This is cleaner than having debugging stuff
directly in 'c'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We print 'ino_t' type using '%lu' printk() placeholder, but this
results in many warnings when compiling for Alpha platform. Fix
this by adding (unsingned long) casts.
Fixes these warnings:
fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t'
fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t'
fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t'
fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t'
fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t'
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Noticed by sparse:
fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer
fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer
fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer
This should be checked to ensure the ubifs_assert is working as
intended, I've done the suggested annotation in this patch.
fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp
fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident>
fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec
fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec
fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec
fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp
This looks like a bugfix as your tmp was a u32 so there was truncation in
the atime, mtime, ctime value, probably not intentional, add a tmp_le64
and use it here.
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:419:9: warning: cast to restricted __le32
Read from the annotated union member instead.
fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags
fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags
Do byteshifting at compile time of the flag value. Annotate the saved_flags
as le32.
fs/ubifs/debug.c:368:10: warning: cast to restricted __le32
fs/ubifs/debug.c:368:10: warning: cast from restricted __le64
Should be checked if the truncation was intentional, I've changed the
printk to print the full width.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Also add debugging checks for LPT size and separate
out c->check_lpt_free from unrelated bitfields.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long
unsigned int', but argument 5 has type 'long unsigned int'
fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long
unsigned int', but argument 2 has type 'long unsigned int'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS recovery testing debug facility simulates media failures.
When simulating an IO error, the error code returned must be
-EIO but it was not always if the user switched off the
debug recovery testing option at the same time.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
This is a new flash file system. See
http://www.linux-mtd.infradead.org/doc/ubifs.html
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Artem Bityutskiy