cpuset uses "const" qualifiers on struct cpuset in some functions;
however, it doesn't work well when a value derived from returned const
pointer has to be passed to an accessor. It's C after all.
Drop the "const" qualifiers except for the trivially leaf ones. This
patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The names of the two struct cgroup_subsys_state accessors -
cgroup_subsys_state() and task_subsys_state() - are somewhat awkward.
The former clashes with the type name and the latter doesn't even
indicate it's somehow related to cgroup.
We're about to revamp large portion of cgroup API, so, let's rename
them so that they're less awkward. Most per-controller usages of the
accessors are localized in accessor wrappers and given the amount of
scheduled changes, this isn't gonna add any noticeable headache.
Rename cgroup_subsys_state() to cgroup_css() and task_subsys_state()
to task_css(). This patch is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
for-3.12 branch is about to receive invasive updates which are
dependent on da0a12caff ("cgroup: fix a leak when percpu_ref_init()
fails"). Given the amount of scheduled changes, I think it'd less
painful to pull in for-3.11-fixes as preparation. Pull in
for-3.11-fixes into for-3.12.
Signed-off-by: Tejun Heo <tj@kernel.org>
It uses a single label and checks the validity of each pointer. This
is err-prone, and actually we had a bug because one of the check was
insufficient.
Use multi lables as we do in other places.
v2:
- drop initializations of local variables.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This enables us to lookup a cgroup by its id.
v4:
- add a comment for idr_remove() in cgroup_offline_fn().
v3:
- on success, idr_alloc() returns the id but not 0, so fix the BUG_ON()
in cgroup_init().
- pass the right value to idr_alloc() so that the id for dummy cgroup is 0.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Constantly use @cset for css_set variables and use @cgrp as cgroup
variables.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We can use struct cfent instead.
v2:
- remove cgroup_seqfile_release().
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This should have been removed in commit d7eeac1913
("cgroup: hold cgroup_mutex before calling css_offline").
While at it, update the comments.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Comment for cpuset_css_offline() was on top of cpuset_css_free().
Move it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get rid of the useless forward declaration of the struct cpuset cause the
below define it.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
rebind_subsystems() performs santiy checks even on subsystems which
aren't specified to be added or removed and the checks aren't all that
useful given that these are in a very cold path while the violations
they check would trip up in much hotter paths.
Let's remove these from rebind_subsystems().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Module ref handling in cgroup is rather weird.
parse_cgroupfs_options() grabs all the modules for the specified
subsystems. A module ref is kept if the specified subsystem is newly
bound to the hierarchy. If not, or the operation fails, the refs are
dropped. This scatters module ref handling across multiple functions
making it difficult to track. It also make the function nasty to use
for dynamic subsystem binding which is necessary for the planned
unified hierarchy.
There's nothing which requires the subsystem modules to be pinned
between parse_cgroupfs_options() and rebind_subsystems() in both mount
and remount paths. parse_cgroupfs_options() can just parse and
rebind_subsystems() can handle pinning the subsystems that it wants to
bind, which is a natural part of its task - binding - anyway.
Move module ref handling into rebind_subsystems() which makes the code
a lot simpler - modules are gotten iff it's gonna be bound and put iff
unbound or binding fails.
v2: Li pointed out that if a controller module is unloaded between
parsing and binding, rebind_subsystems() won't notice the missing
controller as it only iterates through existing controllers. Fix
it by updating rebind_subsystems() to compare @added_mask to
@pinned and fail with -ENOENT if they don't match.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
task_cgroup_path_from_hierarchy() was added for the planned new users
and none of the currently planned users wants to know about multiple
hierarchies. This patch drops the multiple hierarchy part and makes
it always return the path in the first non-dummy hierarchy.
As unified hierarchy will always have id 1, this is guaranteed to
return the path for the unified hierarchy if mounted; otherwise, it
will return the path from the hierarchy which happens to occupy the
lowest hierarchy id, which will usually be the first hierarchy mounted
after boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kaluža <jkaluza@redhat.com>
rebind_subsystems() currently fails if the hierarchy has any !root
cgroups; however, on the planned unified hierarchy,
rebind_subsystems() will be used while populated. Move the test to
cgroup_remount(), which is the only place the test is necessary
anyway.
As it's impossible for the other two callers of rebind_subsystems() to
have populated hierarchy, this doesn't make any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, creating and removing cgroup files in the root directory
are handled separately from the actual subsystem binding and unbinding
which happens in rebind_subsystems(). Also, rebind_subsystems() users
aren't handling file creation errors properly. Let's integrate
top_cgroup file handling into rebind_subsystems() so that it's simpler
to use and everyone handles file creation errors correctly.
* On a successful return, rebind_subsystems() is guaranteed to have
created all files of the new subsystems and deleted the ones
belonging to the removed subsystems. After a failure, no file is
created or removed.
* cgroup_remount() no longer needs to make explicit populate/clear
calls as it's all handled by rebind_subsystems(), and it gets proper
error handling automatically.
* cgroup_mount() has been updated such that the root dentry and cgroup
are linked before rebind_subsystems(). Also, the init_cred dancing
and base file handling are moved right above rebind_subsystems()
call and proper error handling for the base files is added. While
at it, add a comment explaining what's going on with the cred thing.
* cgroup_kill_sb() calls rebind_subsystems() to unbind all subsystems
which now implies removing all subsystem files which requires the
directory's i_mutex. Grab it. This means that files on the root
cgroup are removed earlier - they used to be deleted from generic
super_block cleanup from vfs. This doesn't lead to any functional
difference and it's cleaner to do the clean up explicitly for all
files.
Combined with the previous changes, this makes all cgroup file
creation errors handled correctly.
v2: Added comment on init_cred.
v3: Li spotted that cgroup_mount() wasn't freeing tmp_links after base
file addition failure. Fix it by adding free_tmp_links error
handling label.
v4: v3 introduced build bugs which got noticed by Fengguang's awesome
kbuild test robot. Fixed, and shame on me.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
rebind_subsystems() will be updated to handle file creations and
removals with proper error handling and to do that will need to
perform file operations before actually adding the subsystem to the
hierarchy.
To enable such usage, update cgroup_populate/clear_dir() to use
for_each_subsys() instead of for_each_root_subsys() so that they
operate on all subsystems specified by @subsys_mask whether that
subsystem is currently bound to the hierarchy or not.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_populate_dir() didn't use to check whether the actual file
creations were successful and could return success with only subset of
the requested files created, which is nasty.
This patch udpates cgroup_populate_dir() so that it either succeeds
with all files or fails with no file.
v2: The original patch also converted for_each_root_subsys() usages to
for_each_subsys() without explaining why. That part has been
moved to a separate patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_populate/clear_dir() currently take @base_files and adds and
removes, respectively, cgroup_base_files[] to the directory. File
additions and removals are being reorganized for proper error handling
and more dynamic handling for the unified hierarchy, and mixing base
and subsys file handling into the same functions gets a bit confusing.
This patch moves base file handling out of cgroup_populate/clear_dir()
into their users - cgroup_mount(), cgroup_create() and
cgroup_destroy_locked().
Note that this changes the behavior of base file removal. If
@base_files is %true, cgroup_clear_dir() used to delete files
regardless of cftype until there's no files left. Now, only files
with matching cfts are removed. As files can only be created by the
base or registered cftypes, this shouldn't result in any behavior
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_add_cftypes() uses cgroup_cfts_commit() to actually create the
files; however, both functions ignore actual file creation errors and
just assume success. This can lead to, for example, blkio hierarchy
with some of the cgroups with only subset of interface files populated
after cfq-iosched is loaded under heavy memory pressure, which is
nasty.
This patch updates cgroup_cfts_commit() and cgroup_add_cftypes() to
guarantee that all files are created on success and no file is created
on failure.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_addrm_files() mishandled error return value from
cgroup_add_file() and returns error iff the last file fails to create.
As we're in the process of cleaning up file add/rm error handling and
will reliably propagate file creation failures, there's no point in
keeping adding files after a failure.
Replace the broken error collection logic with immediate error return.
While at it, add lockdep assertions and function comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
* Rename it to cgroup_clear_dir() and make it take the pointer to the
target cgroup instead of the the dentry. This makes the function
consistent with its counterpart - cgroup_populate_dir().
* Move cgroup_clear_directory() invocation from cgroup_d_remove_dir()
to cgroup_remount() so that the function doesn't have to determine
the cgroup pointer back from the dentry. cgroup_d_remove_dir() now
only deals with vfs, which is slightly cleaner.
This patch doesn't introduce any functional differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
were added to 3.10, which includes several bug fixes that have been
marked for stable.
As for new features, there were a few, but nothing to write to LWN about.
These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the function.
Another small enhancement is a new sysctl switch called "traceoff_on_warning"
which, when enabled, will disable tracing if any WARN_ON() is triggered.
This is useful if you want to debug what caused a warning and do not
want to risk losing your trace data by the ring buffer overwriting the
data before you can disable it. There's also a kernel command line
option that will make this enabled at boot up called the same thing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJR1uF2AAoJEOdOSU1xswtMJ1IH/2LSiZAKTA2QaRgGQC/5Bb9c
XSOI1HfD/78lmUvTyb0AX8sLpkzZlvIONEQ/WaZUFo1Zjbrl45zJUwMkTE9uImEg
ZqI5x8OiiN6j4XrRbfYn3Ti060H/Jq41pZXa+shh961Vv51ilv/1yyLkoRmnjzuO
JTloPdXDV7icOqqiSdgxSdtUSv59Ef1ZdHgvvsb3aqzMC5btVQPi4kIys0ST1Tr1
pMWBY+UgvH0xYm3gvTR+W6jjDlkVZEH2alkmcinfr+uC1tm9DDqK2HA17Pd5yZ5z
HNdT76lCzf9iqRF5F8HUvUt+PIp76dNNxAt2qpB6APqAuJTojyguxXHDbY/0kzs=
=UvLi
-----END PGP SIGNATURE-----
Merge tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing changes from Steven Rostedt:
"The majority of the changes here are cleanups for the large changes
that were added to 3.10, which includes several bug fixes that have
been marked for stable.
As for new features, there were a few, but nothing to write to LWN
about. These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the
function.
Another small enhancement is a new sysctl switch called
"traceoff_on_warning" which, when enabled, will disable tracing if any
WARN_ON() is triggered. This is useful if you want to debug what
caused a warning and do not want to risk losing your trace data by the
ring buffer overwriting the data before you can disable it. There's
also a kernel command line option that will make this enabled at boot
up called the same thing"
* tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (34 commits)
tracing: Make tracing_open_generic_{tr,tc}() static
tracing: Remove ftrace() function
tracing: Remove TRACE_EVENT_TYPE enum definition
tracing: Make tracer_tracing_{off,on,is_on}() static
tracing: Fix irqs-off tag display in syscall tracing
uprobes: Fix return value in error handling path
tracing: Fix race between deleting buffer and setting events
tracing: Add trace_array_get/put() to event handling
tracing: Get trace_array ref counts when accessing trace files
tracing: Add trace_array_get/put() to handle instance refs better
tracing: Protect ftrace_trace_arrays list in trace_events.c
tracing: Make trace_marker use the correct per-instance buffer
ftrace: Do not run selftest if command line parameter is set
tracing/kprobes: Don't pass addr=ip to perf_trace_buf_submit()
tracing: Use flag buffer_disabled for irqsoff tracer
tracing/kprobes: Turn trace_probe->files into list_head
tracing: Fix disabling of soft disable
tracing: Add missing syscall_metadata comment
tracing: Simplify code for showing of soft disabled flag
tracing/kprobes: Kill probe_enable_lock
...
Pull printk locking fix from Thomas Gleixner:
"A single lock ordering fix in the printk code"
* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
printk: Fix rq->lock vs logbuf_lock unlock lock inversion
Merge more patches from Andrew Morton:
"The rest of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: remove free_area_cache
zswap: add documentation
zswap: add to mm/
zbud: add to mm/
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"Two small fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix interrupt handler timing harness
perf/x86/amd: Do not print an error when the device is not present
ignore that.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=OVO/
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing interesting. Except the most embarrassing bugfix ever. But
let's ignore that"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: cleanup call chain.
module: do percpu allocation after uniqueness check. No, really!
modules: don't fail to load on unknown parameters.
ABI: Clarify when /sys/module/MODULENAME is created
There is no /sys/parameters
module: don't modify argument of module_kallsyms_lookup_name()
Pull networking updates from David Miller:
"This is a re-do of the net-next pull request for the current merge
window. The only difference from the one I made the other day is that
this has Eliezer's interface renames and the timeout handling changes
made based upon your feedback, as well as a few bug fixes that have
trickeled in.
Highlights:
1) Low latency device polling, eliminating the cost of interrupt
handling and context switches. Allows direct polling of a network
device from socket operations, such as recvmsg() and poll().
Currently ixgbe, mlx4, and bnx2x support this feature.
Full high level description, performance numbers, and design in
commit 0a4db187a9 ("Merge branch 'll_poll'")
From Eliezer Tamir.
2) With the routing cache removed, ip_check_mc_rcu() gets exercised
more than ever before in the case where we have lots of multicast
addresses. Use a hash table instead of a simple linked list, from
Eric Dumazet.
3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
Marek Puzyniak, Michal Kazior, and Sujith Manoharan.
4) Support reporting the TUN device persist flag to userspace, from
Pavel Emelyanov.
5) Allow controlling network device VF link state using netlink, from
Rony Efraim.
6) Support GRE tunneling in openvswitch, from Pravin B Shelar.
7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
Daniel Borkmann and Eric Dumazet.
8) Allow controlling of TCP quickack behavior on a per-route basis,
from Cong Wang.
9) Several bug fixes and improvements to vxlan from Stephen
Hemminger, Pravin B Shelar, and Mike Rapoport. In particular,
support receiving on multiple UDP ports.
10) Major cleanups, particular in the area of debugging and cookie
lifetime handline, to the SCTP protocol code. From Daniel
Borkmann.
11) Allow packets to cross network namespaces when traversing tunnel
devices. From Nicolas Dichtel.
12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
manner akin to how we monitor real network traffic via ptype_all.
From Daniel Borkmann.
13) Several bug fixes and improvements for the new alx device driver,
from Johannes Berg.
14) Fix scalability issues in the netem packet scheduler's time queue,
by using an rbtree. From Eric Dumazet.
15) Several bug fixes in TCP loss recovery handling, from Yuchung
Cheng.
16) Add support for GSO segmentation of MPLS packets, from Simon
Horman.
17) Make network notifiers have a real data type for the opaque
pointer that's passed into them. Use this to properly handle
network device flag changes in arp_netdev_event(). From Jiri
Pirko and Timo Teräs.
18) Convert several drivers over to module_pci_driver(), from Peter
Huewe.
19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
O(1) calculation instead. From Eric Dumazet.
20) Support setting of explicit tunnel peer addresses in ipv6, just
like ipv4. From Nicolas Dichtel.
21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.
22) Prevent a single high rate flow from overruning an individual cpu
during RX packet processing via selective flow shedding. From
Willem de Bruijn.
23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
Dumazet.
24) Don't just drop GSO packets which are above the TBF scheduler's
burst limit, chop them up so they are in-bounds instead. Also
from Eric Dumazet.
25) VLAN offloads are missed when configured on top of a bridge, fix
from Vlad Yasevich.
26) Support IPV6 in ping sockets. From Lorenzo Colitti.
27) Receive flow steering targets should be updated at poll() time
too, from David Majnemer.
28) Fix several corner case regressions in PMTU/redirect handling due
to the routing cache removal, from Timo Teräs.
29) We have to be mindful of ipv4 mapped ipv6 sockets in
upd_v6_push_pending_frames(). From Hannes Frederic Sowa.
30) Fix L2TP sequence number handling bugs, from James Chapman."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
drivers/net: caif: fix wrong rtnl_is_locked() usage
drivers/net: enic: release rtnl_lock on error-path
vhost-net: fix use-after-free in vhost_net_flush
net: mv643xx_eth: do not use port number as platform device id
net: sctp: confirm route during forward progress
virtio_net: fix race in RX VQ processing
virtio: support unlocked queue poll
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
Documentation: Fix references to defunct linux-net@vger.kernel.org
net/fs: change busy poll time accounting
net: rename low latency sockets functions to busy poll
bridge: fix some kernel warning in multicast timer
sfc: Fix memory leak when discarding scattered packets
sit: fix tunnel update via netlink
dt:net:stmmac: Add dt specific phy reset callback support.
dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
dt:net:stmmac: Allocate platform data only if its NULL.
net:stmmac: fix memleak in the open method
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
net: ipv6: fix wrong ping_v6_sendmsg return value
...
Merge together the unicore32, arm, and x86 reboot= command line
parameter handling.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get the new file to pass scripts/checkpatch.pl
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is preparatory. It moves reboot related syscall, etc
functions from kernel/sys.c to kernel/reboot.c.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the prior patch's #define for easier backporting to the stable
releases.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit bf26c01849 ("Prepare to fix racy accesses on task
breakpoints").
The patch was fine but we can no longer race with SIGKILL after commit
9899d11f65 ("ptrace: ensure arch_ptrace/ptrace_request can never race
with SIGKILL"), the __TASK_TRACED tracee can't be woken up and
->ptrace_bps[] can't go away.
Now that ptrace_get_breakpoints/ptrace_put_breakpoints have no callers,
we can kill them and remove task->ptrace_bp_refcnt.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the cpu/pid that called WARN() so that the stack traces can be
matched up with the WARNING messages.
[akpm@linux-foundation.org: remove stray quote]
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Vikram Mulukutla <markivx@codeaurora.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use proper decimal type for comparison with u32.
Compilation warning was introduced by 780a7654 ("audit: Make testing for
a valid loginuid explicit.")
kernel/auditfilter.c: In function 'audit_data_to_entry':
kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) {
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If both 'tree' and 'watch' are valid we must call audit_put_tree(), just
like the preceding code within audit_add_rule().
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90
Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old audit PATH records for mq_open looked like this:
type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
...with the audit related changes that went into 3.7, they now look like this:
type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"
Both of these look wrong to me. As Steve Grubb pointed out:
"What we need is 1 PATH record that identifies the MQ. The other PATH
records probably should not be there."
Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting. With this change, we get
a single PATH record that looks more like this:
type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
obj=unconfined_u:object_r:user_tmpfs_t:s0
In order to do this, a new audit_inode_parent_hidden() function is
added. If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer core updates from Thomas Gleixner:
"The timer changes contain:
- posix timer code consolidation and fixes for odd corner cases
- sched_clock implementation moved from ARM to core code to avoid
duplication by other architectures
- alarm timer updates
- clocksource and clockevents unregistration facilities
- clocksource/events support for new hardware
- precise nanoseconds RTC readout (Xen feature)
- generic support for Xen suspend/resume oddities
- the usual lot of fixes and cleanups all over the place
The parts which touch other areas (ARM/XEN) have been coordinated with
the relevant maintainers. Though this results in an handful of
trivial to solve merge conflicts, which we preferred over nasty cross
tree merge dependencies.
The patches which have been committed in the last few days are bug
fixes plus the posix timer lot. The latter was in akpms queue and
next for quite some time; they just got forgotten and Frederic
collected them last minute."
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
hrtimer: Remove unused variable
hrtimers: Move SMP function call to thread context
clocksource: Reselect clocksource when watchdog validated high-res capability
posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
posix_timers: fix racy timer delta caching on task exit
posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
selftests: add basic posix timers selftests
posix_cpu_timers: consolidate expired timers check
posix_cpu_timers: consolidate timer list cleanups
posix_cpu_timer: consolidate expiry time type
tick: Sanitize broadcast control logic
tick: Prevent uncontrolled switch to oneshot mode
tick: Make oneshot broadcast robust vs. CPU offlining
x86: xen: Sync the CMOS RTC as well as the Xen wallclock
x86: xen: Sync the wallclock when the system time is set
timekeeping: Indicate that clock was set in the pvclock gtod notifier
timekeeping: Pass flags instead of multiple bools to timekeeping_update()
xen: Remove clock_was_set() call in the resume path
hrtimers: Support resuming with two or more CPUs online (but stopped)
timer: Fix jiffies wrap behavior of round_jiffies_common()
...
This is the long awaited simplification of irqdomain. It gets rid of the
different types of irq domains and instead both linear and tree mappings
can be supported in a single domain. Doing this removes a lot of special
case code and makes irq domains simpler to understand overall.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yJRw
-----END PGP SIGNATURE-----
Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux
Pull irqdomain refactoring from Grant Likely:
"This is the long awaited simplification of irqdomain. It gets rid of
the different types of irq domains and instead both linear and tree
mappings can be supported in a single domain. Doing this removes a
lot of special case code and makes irq domains simpler to understand
overall"
* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
irq: fix checkpatch error
irqdomain: Include hwirq number in /proc/interrupts
irqdomain: make irq_linear_revmap() a fast path again
irqdomain: remove irq_domain_generate_simple()
irqdomain: Refactor irq_domain_associate_many()
irqdomain: Beef up debugfs output
irqdomain: Clean up aftermath of irq_domain refactoring
irqdomain: Eliminate revmap type
irqdomain: merge linear and tree reverse mappings.
irqdomain: Add a name field
irqdomain: Replace LEGACY mapping with LINEAR
irqdomain: Relax failure path on setting up mappings
smp_call_function_* must not be called from softirq context.
But clock_was_set() which calls on_each_cpu() is called from softirq
context to implement a delayed clock_was_set() for the timer interrupt
handler. Though that almost never gets invoked. A recent change in the
resume code uses the softirq based delayed clock_was_set to support
Xens resume mechanism.
linux-next contains a new warning which warns if smp_call_function_*
is called from softirq context which gets triggered by that Xen
change.
Fix this by moving the delayed clock_was_set() call to a work context.
Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: xen-devel@lists.xen.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Up to commit 5d33b883a (clocksource: Always verify highres capability)
we had no sanity check when selecting a clocksource, which prevented
that a non highres capable clocksource is used when the system already
switched to highres/nohz mode.
The new sanity check works as Alex and Tim found out. It prevents the
TSC from being used. This happens because on x86 the boot process
looks like this:
tsc_start_freqency_validation(TSC);
clocksource_register(HPET);
clocksource_done_booting();
clocksource_select()
Selects HPET which is valid for high-res
switch_to_highres();
clocksource_register(TSC);
TSC is not selected, because it is not yet
flagged as VALID_HIGH_RES
clocksource_watchdog()
Validates TSC for highres, but that does not make TSC
the current clocksource.
Before the sanity check was added, we installed TSC unvalidated which
worked most of the time. If the TSC was really detected as unstable,
then the unstable logic removed it and installed HPET again.
The sanity check is correct and needed. So the watchdog needs to kick
a reselection of the clocksource, when it qualifies TSC as a valid
high res clocksource.
To solve this, we mark the clocksource which got the flag
CLOCK_SOURCE_VALID_FOR_HRES set by the watchdog with an new flag
CLOCK_SOURCE_RESELECT and trigger the watchdog thread. The watchdog
thread evaluates the flag and invokes clocksource_select() when set.
To avoid that the clocksource_done_booting() code, which is about to
install the first real clocksource anyway, needs to go through
clocksource_select and tick_oneshot_notify() pointlessly, split out
the clocksource_watchdog_kthread() list walk code and invoke the
select/notify only when called from clocksource_watchdog_kthread().
So clocksource_done_booting() can utilize the same splitout code
without the select/notify invocation and the clocksource_mutex
unlock/relock dance.
Reported-and-tested-by: Alex Shi <alex.shi@intel.com>
Cc: Hans Peter Anvin <hpa@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307042239150.11637@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fixes a serious bug in:
14c63f17b1 perf: Drop sample rate when sampling is too slow
There was an misunderstanding on the API of the do_div()
macro. It returns the remainder of the division and this
was not what the function expected leading to disabling the
interrupt latency watchdog.
This patch also remove a duplicate assignment in
perf_sample_event_took().
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: dave.hansen@linux.intel.com
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/20130704223010.GA30625@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core
Frederic sayed: "Most of these patches have been hanging around for
several month now, in -mmotm for a significant chunk. They already
missed a few releases."
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
When tsk->signal->cputimer->running is 1, signal->cputimer (i.e. per process
timer account) and tsk->sum_sched_runtime (i.e. per thread timer account)
increase at the same pace because update_curr() increases both accounting.
However, there is one exception. When thread exiting, __exit_signal() turns
over task's sum_shced_runtime to sig->sum_sched_runtime, but it doesn't stop
signal->cputimer accounting.
This inconsistency makes POSIX timer wake up too early. This patch fixes it.
Original-patch-by: Olivier Langlois <olivier@trillion01.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
