If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized. This may lead
to VM_BUG_ON due to uninitialized struct pages access from
test_pages_in_a_zone() function triggered by memory_hotplug sysfs
handlers.
Here are the the panic examples:
CONFIG_DEBUG_VM_PGFLAGS=y
kernel parameter mem=2050M
--------------------------
page:000003d082008000 is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
Call Trace:
test_pages_in_a_zone+0xde/0x160
show_valid_zones+0x5c/0x190
dev_attr_show+0x34/0x70
sysfs_kf_seq_show+0xc8/0x148
seq_read+0x204/0x480
__vfs_read+0x32/0x178
vfs_read+0x82/0x138
ksys_read+0x5a/0xb0
system_call+0xdc/0x2d8
Last Breaking-Event-Address:
test_pages_in_a_zone+0xde/0x160
Kernel panic - not syncing: Fatal exception: panic_on_oops
Fix this by checking whether the pfn to check is within the zone.
[mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org
[mhocko@suse.com: separated this change from
http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.
Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1]. I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.
We have ended up with commit 2830bf6f05 ("mm, memory_hotplug:
initialize struct pages for the full memory section") merged and cause a
regression [2][3]. The reason is that there might be memory layouts
when two NUMA nodes share the same memory section so the merged fix is
simply incorrect.
In order to plug this hole we really have to be zone range aware in
those handlers. I have split up the original patch into two. One is
unchanged (patch 2) and I took a different approach for `removable'
crash.
[1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948
[3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz
This patch (of 2):
Mikhail has reported the following VM_BUG_ON triggered when reading sysfs
removable state of a memory block:
page:000003d08300c000 is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
Call Trace:
is_mem_section_removable+0xb4/0x190
show_mem_removable+0x9a/0xd8
dev_attr_show+0x34/0x70
sysfs_kf_seq_show+0xc8/0x148
seq_read+0x204/0x480
__vfs_read+0x32/0x178
vfs_read+0x82/0x138
ksys_read+0x5a/0xb0
system_call+0xdc/0x2d8
Last Breaking-Event-Address:
is_mem_section_removable+0xb4/0x190
Kernel panic - not syncing: Fatal exception: panic_on_oops
The reason is that the memory block spans the zone boundary and we are
stumbling over an unitialized struct page. Fix this by enforcing zone
range in is_mem_section_removable so that we never run away from a zone.
Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arkadiusz reported that enabling memcg's group oom killing causes
strange memcg statistics where there is no task in a memcg despite the
number of tasks in that memcg is not 0. It turned out that there is a
bug in wake_oom_reaper() which allows enqueuing same task twice which
makes impossible to decrease the number of tasks in that memcg due to a
refcount leak.
This bug existed since the OOM reaper became invokable from
task_will_free_mem(current) path in out_of_memory() in Linux 4.7,
T1@P1 |T2@P1 |T3@P1 |OOM reaper
----------+----------+----------+------------
# Processing an OOM victim in a different memcg domain.
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
try_charge()
mem_cgroup_out_of_memory()
mutex_lock(&oom_lock)
out_of_memory()
oom_kill_process(P1)
do_send_sig_info(SIGKILL, @P1)
mark_oom_victim(T1@P1)
wake_oom_reaper(T1@P1) # T1@P1 is enqueued.
mutex_unlock(&oom_lock)
out_of_memory()
mark_oom_victim(T2@P1)
wake_oom_reaper(T2@P1) # T2@P1 is enqueued.
mutex_unlock(&oom_lock)
out_of_memory()
mark_oom_victim(T1@P1)
wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL.
mutex_unlock(&oom_lock)
# Completed processing an OOM victim in a different memcg domain.
spin_lock(&oom_reaper_lock)
# T1P1 is dequeued.
spin_unlock(&oom_reaper_lock)
but memcg's group oom killing made it easier to trigger this bug by
calling wake_oom_reaper() on the same task from one out_of_memory()
request.
Fix this bug using an approach used by commit 855b018325 ("oom,
oom_reaper: disable oom_reaper for oom_kill_allocating_task"). As a
side effect of this patch, this patch also avoids enqueuing multiple
threads sharing memory via task_will_free_mem(current) path.
Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp
Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp
Fixes: af8e15cc85 ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: Jay Kamat <jgkamat@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, buffer_migrate_page_norefs() was constantly failing because
buffer_migrate_lock_buffers() grabbed reference on each buffer. In
fact, there's no reason for buffer_migrate_lock_buffers() to grab any
buffer references as the page is locked during all our operation and
thus nobody can reclaim buffers from the page.
So remove grabbing of buffer references which also makes
buffer_migrate_page_norefs() succeed.
Link: http://lkml.kernel.org/r/20190116131217.7226-1-jack@suse.cz
Fixes: 89cb0888ca "mm: migrate: provide buffer_migrate_page_norefs()"
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, exit_ptrace() adds all ptraced tasks in a dead list, then
zap_pid_ns_processes() waits on all tasks in a current pidns, and only
then are tasks from the dead list released.
zap_pid_ns_processes() can get stuck on waiting tasks from the dead
list. In this case, we will have one unkillable process with one or
more dead children.
Thanks to Oleg for the advice to release tasks in find_child_reaper().
Link: http://lkml.kernel.org/r/20190110175200.12442-1-avagin@gmail.com
Fixes: 7c8bd2322c ("exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent()")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the kernel is configured with KASAN_EXTRA, the stack size is
increasted significantly because this option sets "-fstack-reuse" to
"none" in GCC [1]. As a result, it triggers stack overrun quite often
with 32k stack size compiled using GCC 8. For example, this reproducer
https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c
triggers a "corrupted stack end detected inside scheduler" very reliably
with CONFIG_SCHED_STACK_END_CHECK enabled.
There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks. Some noticiable ones
are
size
7648 shrink_page_list
3584 xfs_rmap_convert
3312 migrate_page_move_mapping
3312 dev_ethtool
3200 migrate_misplaced_transhuge_page
3168 copy_process
There are other 49 functions are over 2k in size while compiling kernel
with "-Wframe-larger-than=" even with a related minimal config on this
machine. Hence, it is too much work to change Makefiles for each object
to compile without "-fsanitize-address-use-after-scope" individually.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23
Although there is a patch in GCC 9 to help the situation, GCC 9 probably
won't be released in a few months and then it probably take another
6-month to 1-year for all major distros to include it as a default.
Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020
when GCC 9 is everywhere. Until then, this patch will help users avoid
stack overrun.
This has already been fixed for arm64 for the same reason via
6e8830674e ("arm64: kasan: Increase stack size for KASAN_EXTRA").
Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb needs the same fix as faultin_nopage (which was applied in
commit 96312e6128 ("mm/gup.c: teach get_user_pages_unlocked to handle
FOLL_NOWAIT")) or KVM hangs because it thinks the mmap_sem was already
released by hugetlb_fault() if it returned VM_FAULT_RETRY, but it wasn't
in the FOLL_NOWAIT case.
Link: http://lkml.kernel.org/r/20190109020203.26669-2-aarcange@redhat.com
Fixes: ce53053ce3 ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most architectures do not export shmparam.h to user-space.
$ find arch -name shmparam.h | sort
arch/alpha/include/asm/shmparam.h
arch/arc/include/asm/shmparam.h
arch/arm64/include/asm/shmparam.h
arch/arm/include/asm/shmparam.h
arch/csky/include/asm/shmparam.h
arch/ia64/include/asm/shmparam.h
arch/mips/include/asm/shmparam.h
arch/nds32/include/asm/shmparam.h
arch/nios2/include/asm/shmparam.h
arch/parisc/include/asm/shmparam.h
arch/powerpc/include/asm/shmparam.h
arch/s390/include/asm/shmparam.h
arch/sh/include/asm/shmparam.h
arch/sparc/include/asm/shmparam.h
arch/x86/include/asm/shmparam.h
arch/xtensa/include/asm/shmparam.h
Strangely, some users of the asm-generic wrapper export shmparam.h
$ git grep 'generic-y += shmparam.h'
arch/c6x/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/h8300/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/hexagon/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/m68k/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/microblaze/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/openrisc/include/uapi/asm/Kbuild:generic-y += shmparam.h
arch/riscv/include/asm/Kbuild:generic-y += shmparam.h
arch/unicore32/include/uapi/asm/Kbuild:generic-y += shmparam.h
The newly added riscv correctly creates the asm-generic wrapper
in the kernel space, but the others (c6x, h8300, hexagon, m68k,
microblaze, openrisc, unicore32) create the one in the uapi directory.
Digging into the git history, now I guess fcc8487d47 ("uapi:
export all headers under uapi directories") was the misconversion.
Prior to that commit, no architecture exported to shmparam.h
As its commit description said, that commit exported shmparam.h
for c6x, h8300, hexagon, m68k, openrisc, unicore32.
83f0124ad8 ("microblaze: remove asm-generic wrapper headers")
accidentally exported shmparam.h for microblaze.
This commit unexports shmparam.h for those architectures.
There is no more reason to export include/uapi/asm-generic/shmparam.h,
so it has been moved to include/asm-generic/shmparam.h
Link: http://lkml.kernel.org/r/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Mark Salter <msalter@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_migrate_range() takes a memory range and tries to isolate the pages
to put them into a list. This list will be later on used in
migrate_pages() to know the pages we need to migrate.
Currently, if we fail to isolate a single page, we put all already
isolated pages back to their LRU and we bail out from the function.
This is quite suboptimal, as this will force us to start over again
because scan_movable_pages will give us the same range. If there is no
chance that we can isolate that page, we will loop here forever.
Issue debugged in [1] has proved that. During the debugging of that
issue, it was noticed that if do_migrate_ranges() fails to isolate a
single page, we will just discard the work we have done so far and bail
out, which means that scan_movable_pages() will find again the same set
of pages.
Instead, we can just skip the error, keep isolating as much pages as
possible and then proceed with the call to migrate_pages().
This will allow us to do as much work as possible at once.
[1] https://lkml.org/lkml/2018/12/6/324
Michal said:
: I still think that this doesn't give us a whole picture. Looping for
: ever is a bug. Failing the isolation is quite possible and it should
: be a ephemeral condition (e.g. a race with freeing the page or
: somebody else isolating the page for whatever reason). And here comes
: the disadvantage of the current implementation. We simply throw
: everything on the floor just because of a ephemeral condition. The
: racy page_count check is quite dubious to prevent from that.
Link: http://lkml.kernel.org/r/20181211135312.27034-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Still not much going on, the usual set of OOP's and driver updates this time.
- Fix two uapi breakage regressions in mlx5 drivers
- Various oops fixes in hfi1, mlx4, umem, uverbs, and ipoib
- A protocol bug fix for hfi1 preventing it from implementing the verbs
API properly, and a compatability fix for EXEC STACK user programs
- Fix missed refcounting in the 'advise_mr' patches merged this
cycle.
- Fix wrong use of the uABI in the hns SRQ patches merged this cycle.
-----BEGIN PGP SIGNATURE-----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=LxVe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Still not much going on, the usual set of oops and driver fixes this
time:
- Fix two uapi breakage regressions in mlx5 drivers
- Various oops fixes in hfi1, mlx4, umem, uverbs, and ipoib
- A protocol bug fix for hfi1 preventing it from implementing the
verbs API properly, and a compatability fix for EXEC STACK user
programs
- Fix missed refcounting in the 'advise_mr' patches merged this
cycle.
- Fix wrong use of the uABI in the hns SRQ patches merged this cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociate
IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start
IB/uverbs: Fix ioctl query port to consider device disassociation
RDMA/mlx5: Fix flow creation on representors
IB/uverbs: Fix OOPs upon device disassociation
RDMA/umem: Add missing initialization of owning_mm
RDMA/hns: Update the kernel header file of hns
IB/mlx5: Fix how advise_mr() launches async work
RDMA/device: Expose ib_device_try_get(()
IB/hfi1: Add limit test for RC/UC send via loopback
IB/hfi1: Remove overly conservative VM_EXEC flag check
IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM
IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOV
RDMA/mlx5: Fix check for supported user flags when creating a QP
- fix page migration when using iomap for pagecache management
- fix a use-after-free bug in the directio code
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlxPK1IACgkQ+H93GTRK
tOvzeA/+I4bWVmovfV+EGFzHSV6zRsy17v6c4ncMrdia41rhmvxl+sAJgj2+uFCb
J37cCMpPrmAOz+JGIW7PbCt8uzmwaXOfB9p9N58wM+hSSxtlN+wZFsIaoepOUTDK
t3e2L7QQxQjN9HXZU0RNUi/zgS3poDfzap7cZ71spBxX5hVd1zVQa0q/o5OXr7OI
sBlZLsIOhmS8WU2TmfkwzUVi+/FR4dCgyP8eDAGho/KbwvO9sfWzLNxf0U/ORWfA
JG+2LX42eKKjX6wo39zW1mAXwOBhnLnCqOOgKrDy8XRXPARiNAzLNn0AwhxJSAqD
z3qE298Oag6gZo0lNJjDXIko5D9y2koWjQe7z4fJ2JYpV5mSyq8/F4XDNO2FKIap
07p0OBGa1yfwQYmS5TrhJvYwvsHqTNs122jpowqeD3o0Xh64y2TZLEMdhhIsRjga
+S9OSVQ15JDf/QeI5LPGK6Oc6B3JnRYgrYf7g7DYu4eqEsJ3V3pqtbXzjxGkzUjx
5xf85ujuRUQoKCPZQ00ewmsfZMfOcaYqfhosx6LvR6ZPvPH3Ex3nLHks5ZV/eXfR
Auusq6XMiHb5ljukfVCa0WStntUl5gMaRha5QJy1Vg5Zd1ikvTkB5CkJFlODJ8hS
GaEIa58Gf75dkHOvm4bFEOoy2EcE3I+qdwR+0xgg+6gDlNeZZNQ=
=KYgc
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"A couple of iomap fixes to eliminate some memory corruption and hang
problems that were reported:
- fix page migration when using iomap for pagecache management
- fix a use-after-free bug in the directio code"
* tag 'iomap-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix a use after free in iomap_dio_rw
iomap: get/put the page in iomap_page_create/release()
- Since ktime_get() turns out to be problematic for device
autosuspend in the PM-runtime framework, make it use
ktime_get_mono_fast_ns() instead (Vincent Guittot).
- Fix an initial value of a local variable in the "poll idle state"
code that makes it behave not exactly as expected when all idle
states except for the "polling" one are disabled (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3UG4
-----END PGP SIGNATURE-----
Merge tag 'pm-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a PM-runtime framework regression introduced by the recent
switch-over of device autosuspend to hrtimers and a mistake in the
"poll idle state" code introduced by a recent change in it.
Specifics:
- Since ktime_get() turns out to be problematic for device
autosuspend in the PM-runtime framework, make it use
ktime_get_mono_fast_ns() instead (Vincent Guittot).
- Fix an initial value of a local variable in the "poll idle state"
code that makes it behave not exactly as expected when all idle
states except for the "polling" one are disabled (Doug Smythies)"
* tag 'pm-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: poll_state: Fix default time limit
PM-runtime: Fix deadlock with ktime_get()
Prevent invalid configurations from being created (e.g. by randconfig)
due to some ACPI-related Kconfig options' dependencies that are not
specified directly (Sinan Kaya).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yW1p
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI Kconfig fixes from Rafael Wysocki:
"Prevent invalid configurations from being created (e.g. by randconfig)
due to some ACPI-related Kconfig options' dependencies that are not
specified directly (Sinan Kaya)"
* tag 'acpi-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: Fix unmet dependency warning for SAMSUNG_Q10
platform/x86: Fix unmet dependency warning for ACPI_CMPC
mfd: Fix unmet dependency warning for MFD_TPS68470
- Fix the error path in i3c_master_add_i3c_dev_locked()
-----BEGIN PGP SIGNATURE-----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=cU2G
-----END PGP SIGNATURE-----
Merge tag 'i3c/fixes-for-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Boris Brezillon:
- Fix a deadlock in the designware driver
- Fix the error path in i3c_master_add_i3c_dev_locked()
* tag 'i3c/fixes-for-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: fix deadlock
i3c: fix missing detach if failed to retrieve i3c dev
In commit 170d13ca3a ("x86: re-introduce non-generic memcpy_{to,from}io")
I made our copy from IO space use a separate copy routine rather than
rely on the generic memcpy. I did that because our generic memory copy
isn't actually well-defined when it comes to internal access ordering or
alignment, and will in fact depend on various CPUID flags.
In particular, the default memcpy() for a modern Intel CPU will
generally be just a "rep movsb", which works reasonably well for
medium-sized memory copies of regular RAM, since the CPU will turn it
into fairly optimized microcode.
However, for non-cached memory and IO, "rep movs" ends up being
horrendously slow and will just do the architectural "one byte at a
time" accesses implied by the movsb.
At the other end of the spectrum, if you _don't_ end up using the "rep
movsb" code, you'd likely fall back to the software copy, which does
overlapping accesses for the tail, and may copy things backwards.
Again, for regular memory that's fine, for IO memory not so much.
The thinking was that clearly nobody really cared (because things
worked), but some people had seen horrible performance due to the byte
accesses, so let's just revert back to our long ago version that dod
"rep movsl" for the bulk of the copy, and then fixed up the potentially
last few bytes of the tail with "movsw/b".
Interestingly (and perhaps not entirely surprisingly), while that was
our original memory copy implementation, and had been used before for
IO, in the meantime many new users of memcpy_*io() had come about. And
while the access patterns for the memory copy weren't well-defined (so
arguably _any_ access pattern should work), in practice the "rep movsb"
case had been very common for the last several years.
In particular Jarkko Sakkinen reported that the memcpy_*io() change
resuled in weird errors from his Geminilake NUC TPM module.
And it turns out that the TPM TCG accesses according to spec require
that the accesses be
(a) done strictly sequentially
(b) be naturally aligned
otherwise the TPM chip will abort the PCI transaction.
And, in fact, the tpm_crb.c driver did this:
memcpy_fromio(buf, priv->rsp, 6);
...
memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
which really should never have worked in the first place, but back
before commit 170d13ca3a it *happened* to work, because the
memcpy_fromio() would be expanded to a regular memcpy, and
(a) gcc would expand the first memcpy in-line, and turn it into a
4-byte and a 2-byte read, and they happened to be in the right
order, and the alignment was right.
(b) gcc would call "memcpy()" for the second one, and the machines that
had this TPM chip also apparently ended up always having ERMS
("Enhanced REP MOVSB/STOSB instructions"), so we'd use the "rep
movbs" for that copy.
In other words, basically by pure luck, the code happened to use the
right access sizes in the (two different!) memcpy() implementations to
make it all work.
But after commit 170d13ca3a, both of the memcpy_fromio() calls
resulted in a call to the routine with the consistent memory accesses,
and in both cases it started out transferring with 4-byte accesses.
Which worked for the first copy, but resulted in the second copy doing a
32-bit read at an address that was only 2-byte aligned.
Jarkko is actually fixing the fragile code in the TPM driver, but since
this is an excellent example of why we absolutely must not use a generic
memcpy for IO accesses, _and_ an IO-specific one really should strive to
align the IO accesses, let's do exactly that.
Side note: Jarkko also noted that the driver had been used on ARM
platforms, and had worked. That was because on 32-bit ARM, memcpy_*io()
ends up always doing byte accesses, and on 64-bit ARM it first does byte
accesses to align to 8-byte boundaries, and then does 8-byte accesses
for the bulk.
So ARM actually worked by design, and the x86 case worked by pure luck.
We *might* want to make x86-64 do the 8-byte case too. That should be a
pretty straightforward extension, but let's do one thing at a time. And
generally MMIO accesses aren't really all that performance-critical, as
shown by the fact that for a long time we just did them a byte at a
time, and very few people ever noticed.
Reported-and-tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Fixes: 170d13ca3a ("x86: re-introduce non-generic memcpy_{to,from}io")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
aa_label_merge() can return NULL for memory allocations failures
make sure to handle and set the correct error in this case.
Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
During resume hibernate restores all physical memory. Any memory
that is accessed with the MMU disabled needs to be cleaned to the
PoC.
KVMs __hyp_text was previously ommitted as it runs with the MMU
enabled, but now that the hyp-stub is located in this section,
we must clean __hyp_text too.
This ensures secondary CPUs that come online after hibernate
has finished resuming, and load KVM via the freshly written
hyp-stub see the correct instructions.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
The hyp-stub is loaded by the kernel's early startup code at EL2
during boot, before KVM takes ownership later. The hyp-stub's
text is part of the regular kernel text, meaning it can be kprobed.
A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid.
Add it to the __hyp_text.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.
Move the __hyp_text check in the kprobes blacklist so it applies on
VHE systems too, to cover the common code and guest enter/exit
assembly.
Fixes: 888b3c8720 ("arm64: Treat all entry code as non-kprobe-able")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 1598ecda7b ("arm64: kaslr: ensure randomized quantities are
clean to the PoC") added cache maintenance to ensure that global
variables set by the kaslr init routine are not wiped clean due to
cache invalidation occurring during the second round of page table
creation.
However, if kaslr_early_init() exits early with no randomization
being applied (either due to the lack of a seed, or because the user
has disabled kaslr explicitly), no cache maintenance is performed,
leading to the same issue we attempted to fix earlier, as far as the
module_alloc_base variable is concerned.
Note that module_alloc_base cannot be initialized statically, because
that would cause it to be subject to a R_AARCH64_RELATIVE relocation,
causing it to be overwritten by the second round of KASLR relocation
processing.
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache
for kernel mappings") was aimed at fixing the I-cache invalidation for
kernel mappings. However, it inadvertently caused all cache maintenance
for user mappings via set_pte_at() -> __sync_icache_dcache() ->
sync_icache_aliases() to call kick_all_cpus_sync().
Reported-by: Shijith Thotton <sthotton@marvell.com>
Tested-by: Shijith Thotton <sthotton@marvell.com>
Reported-by: Wandun Chen <chenwandun@huawei.com>
Fixes: 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Cc: <stable@vger.kernel.org> # 4.19.x-
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
when compiled without CONFIG_IPV6:
security/apparmor/lsm.c:1601:21: warning: ‘apparmor_ipv6_postroute’ defined but not used [-Wunused-function]
static unsigned int apparmor_ipv6_postroute(void *priv,
^~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: John Johansen <john.johansen@canonical.com>
- Revert the commits that introduce clk management for the SP
clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good
idea and there isn't any need to manage this clk, it just causes
more headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking
for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of operations
were messed up
- One error handling fix from the static checkers
-----BEGIN PGP SIGNATURE-----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=G4M9
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Mostly driver fixes, but there's a core framework fix in here too:
- Revert the commits that introduce clk management for the SP clk on
MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
there isn't any need to manage this clk, it just causes more
headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of
operations were messed up
- One error handling fix from the static checkers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Use active only source for CPUSS clocks
clk: ti: Fix error handling in ti_clk_parse_divider_data()
clk: imx: Fix fractional clock set rate computation
clk: Remove global clk traversal on fetch parent index
Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
Revert "clk: mmp2: add SP clock"
Revert "Input: olpc_apsp - enable the SP clock"
Pull crypto fix from Herbert Xu:
"This fixes a bug in cavium/nitrox where the callback is invoked prior
to the DMA unmap"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium/nitrox - Invoke callback after DMA unmap
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
variable 'rst' set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal").
That commit breaks boot on Macchiatobin board when a Mellanox NIC is
present in the PCIe slot.
It turns out that full reset cycle requires first comphy serdes
initialization. Reset signal toggle without comphy initialization makes
access to PCI configuration registers stall indefinitely. U-Boot toggles
the Macchiatobin PCIe reset line already at boot, after initializing the
comphy serdes.
So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") enables PCIe on platforms that U-Boot does not touch the
reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the
Macchiatobin board.
Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") entirely to fix the Macchiatobin regression.
Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
commit 802b7c06ad ("ARM: cns3xxx: Convert PCI to use generic config
accessors") reimplemented cns3xxx_pci_read_config() using
pci_generic_config_read32(), which preserved the property of only doing
32-bit reads.
It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.
Given that:
- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended
Allow read access of any size by replacing pci_generic_config_read32()
with the pci_generic_config_read() accessors.
Fixes: 802b7c06ad ("ARM: cns3xxx: Convert PCI to use generic config accessors")
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: Krzysztof Halasa <khalasa@piap.pl>
CC: Olof Johansson <olof@lixom.net>
CC: Robin Leblon <robin.leblon@ncentric.com>
CC: Rob Herring <robh@kernel.org>
CC: Russell King <linux@armlinux.org.uk>
CC: Tim Harvey <tharvey@gateworks.com>
Originally, cns3xxx used its own functions for mapping, reading and
writing config registers.
Commit 802b7c06ad ("ARM: cns3xxx: Convert PCI to use generic config
accessors") removed the internal PCI config write function in favor of
the generic one:
cns3xxx_pci_write_config() --> pci_generic_config_write()
cns3xxx_pci_write_config() expected aligned addresses, being produced by
cns3xxx_pci_map_bus() while the generic one pci_generic_config_write()
actually expects the real address as both the function and hardware are
capable of byte-aligned writes.
This currently leads to pci_generic_config_write() writing to the wrong
registers.
For instance, upon ath9k module loading:
- driver ath9k gets loaded
- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER,
located at 0x0D
- cns3xxx_pci_map_bus() aligns the address to 0x0C
- pci_generic_config_write() effectively writes 0xA8 into register 0x0C
(CACHE_LINE_SIZE)
Fix the bug by removing the alignment in the cns3xxx mapping function.
Fixes: 802b7c06ad ("ARM: cns3xxx: Convert PCI to use generic config accessors")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: stable@vger.kernel.org # v4.0+
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Olof Johansson <olof@lixom.net>
CC: Robin Leblon <robin.leblon@ncentric.com>
CC: Rob Herring <robh@kernel.org>
CC: Russell King <linux@armlinux.org.uk>
The check on the device_link_add() return value is wrong;
this leads to erroneous code execution, so fix it.
Fixes: 3f7cceeab8 ("PCI: imx: Add multi-pd support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
On chips without a separate power domain for PCI (such as 6q/6qp) the
imx6_pcie_attach_pd() function incorrectly returns an error.
Fix by returning 0 if dev_pm_domain_attach_by_name() does not find
anything.
Fixes: 3f7cceeab8 ("PCI: imx: Add multi-pd support")
Reported-by: Lukas F.Hartmann <lukas@mntmn.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This reverts commit 2d29f6b96d.
It turns out that the fix can lead to a ~20 percent performance regression
in initial writes to the page cache according to iozone. Let's revert this
for now to have more time for a proper fix.
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This Kselftest update for Linux 5.0-rc5 consists of run-time fixes to
cpu-hotplug, and seccomp tests, compile fixes to ir, net, and timers
Makefiles.
-----BEGIN PGP SIGNATURE-----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=PV+K
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This consists of run-time fixes to cpu-hotplug, and seccomp tests,
compile fixes to ir, net, and timers Makefiles"
* tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: timers: use LDLIBS instead of LDFLAGS
selftests: net: use LDLIBS instead of LDFLAGS
selftests/seccomp: Enhance per-arch ptrace syscall skip tests
selftests: Use lirc.h from kernel tree, not from system
selftests: cpu-hotplug: fix case where CPUs offline > CPUs present
Stable bugfix:
- Fix up return value on fatal errors in nfs_page_async_flush()
Other bugfix:
- Fix NULL pointer dereference of dev_name
-----BEGIN PGP SIGNATURE-----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=ZOXa
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"This addresses two bugs, one in the error code handling of
nfs_page_async_flush() and one to fix a potential NULL pointer
dereference in nfs_parse_devname().
Stable bugfix:
- Fix up return value on fatal errors in nfs_page_async_flush()
Other bugfix:
- Fix NULL pointer dereference of dev_name"
* tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix up return value on fatal errors in nfs_page_async_flush()
nfs: Fix NULL pointer dereference of dev_name
Only three fixes: a fix for Realtek HD-audio looks lengthy, but it's
just a code shuffling, and the actual changes are fairly small. The
rest are a PCM core fix for a long-standing bug that was recently
scratched by syzkaller, and a trivial USB-audio quirk for DSD
support.
-----BEGIN PGP SIGNATURE-----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=KZ/d
-----END PGP SIGNATURE-----
Merge tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only three fixes.
The fix for Realtek HD-audio looks lengthy, but it's just a code
shuffling, and the actual changes are fairly small.
The rest are a PCM core fix for a long-standing bug that was recently
scratched by syzkaller, and a trivial USB-audio quirk for DSD support"
* tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fixed hp_pin no value
ALSA: pcm: Fix tight loop of OSS capture stream
ALSA: usb-audio: Add Opus #3 to quirks for native DSD support
This series adds the OPFN feature, which is used as the negotiation
protocol by TID RDMA. This adds a totally hidden, in-band negotiation
transfer that happens on the consumer's queue pair but without the
consumer's knowledge. For that reason, things like completions for OPFN
transfers must be filtered out of the completion queue and not sent to
the consumer. This feature does not impact any consumer APIs, but does
impact the driver/driver wire API.
At a high level OPFN enables exchanging parameters between two hosts
using IB compare and swap requests to a special virtual address. The
request uses a reserved IB work request opcode (see patch 3).
* opfn:
IB/hfi1: Add static trace for OPFN
IB/hfi1: Integrate OPFN into RC transactions
IB/hfi1, IB/rdmavt: Allow for extending of QP's s_ack_queue
IB/hfi1: OPFN interface
IB/hfi1: Add OPFN helper functions for TID RDMA feature
IB/hfi1: OPFN support discovery
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the static trace to the OPFN code and moves tid related
static trace code into a new header file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN parameter negotiation allows a pair of connected RC QPs to exchange
a set of parameters in succession. This negotiation does not commence
till the first ULP request. Because OPFN operations are operations
private to the driver, they do not generate user completions or put the
QP into error when they run out of retries. This patch integrates the
OPFN protocol into the transactions of an RC QP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The OPFN protocol uses the COMPARE_SWAP request to exchange data
between the requester and the responder and therefore needs to
be stored in the QP's s_ack_queue when the request is received
on the responder side. However, because the user does not know
anything about the OPFN protocol, this extra entry in the
queue cannot be advertised to the user. This patch adds an extra
entry in a QP's s_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN allows a pair of connected RC QPs to exchange a set of parameters
in succession. The parameter exchange itself is done using the IB compare
and swap request with a special virtual address. The request is triggered
using a reserved IB work request opcode. This patch implements the OPFN
interface to initialize, start, process, and reset the OPFN request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the OPFN helper functions to initialize, encode, decode,
and reset OPFN parameters for the TID RDMA feature.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to
announce that it supports OPFN and also discover if OPFN is supported by
the peer QP. OPFN parameter negotiation is skipped unless OPFN support is
first discovered. OPFN support is announced by claiming what was
the reserved bit in dword 1 of OmniPath modified base transport header
in requests and responses.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.
While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.
If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:
x86/CPU: CPU features have changed after loading microcode, but might not take effect.
x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.
However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.
Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.
[ bp: massage commit message. ]
Fixes: 2613f36ed9 ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net
There's an issue with how sense requests are handled in IDE. If ide-cd
encounters an error, it queues a sense request. With how IDE request
handling is done, this is the next request we need to handle. But it's
impossible to guarantee this, as another request could come in between
the sense being queued, and ->queue_rq() being run and handling it. If
that request ALSO fails, then we attempt to doubly queue the single
sense request we have.
Since we only support one active request at the time, defer request
processing when a sense request is queued.
Fixes: 600335205b "ide: convert to blk-mq"
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikhail Zaslonko