commit 86a7964be7 upstream.
There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.
Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.
Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d7915 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b71843fa7 upstream.
When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.
Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the client hits reconnect it iterates over the mid
pending queue marking entries for retry and moving them
to a temporary list to issue callbacks later without holding
GlobalMid_Lock. In the same time there is no guarantee that
mids can't be removed from the temporary list or even
freed completely by another thread. It may cause a temporary
list corruption:
[ 430.454897] list_del corruption. prev->next should be ffff98d3a8f316c0, but was 2e885cb266355469
[ 430.464668] ------------[ cut here ]------------
[ 430.466569] kernel BUG at lib/list_debug.c:51!
[ 430.468476] invalid opcode: 0000 [#1] SMP PTI
[ 430.470286] CPU: 0 PID: 13267 Comm: cifsd Kdump: loaded Not tainted 5.4.0-rc3+ #19
[ 430.473472] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 430.475872] RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
...
[ 430.510426] Call Trace:
[ 430.511500] cifs_reconnect+0x25e/0x610 [cifs]
[ 430.513350] cifs_readv_from_socket+0x220/0x250 [cifs]
[ 430.515464] cifs_read_from_socket+0x4a/0x70 [cifs]
[ 430.517452] ? try_to_wake_up+0x212/0x650
[ 430.519122] ? cifs_small_buf_get+0x16/0x30 [cifs]
[ 430.521086] ? allocate_buffers+0x66/0x120 [cifs]
[ 430.523019] cifs_demultiplex_thread+0xdc/0xc30 [cifs]
[ 430.525116] kthread+0xfb/0x130
[ 430.526421] ? cifs_handle_standard+0x190/0x190 [cifs]
[ 430.528514] ? kthread_park+0x90/0x90
[ 430.530019] ret_from_fork+0x35/0x40
Fix this by obtaining extra references for mids being retried
and marking them as MID_DELETED which indicates that such a mid
has been dequeued from the pending list.
Also move mid cleanup logic from DeleteMidQEntry to
_cifs_mid_q_entry_release which is called when the last reference
to a particular mid is put. This allows to avoid any use-after-free
of response buffers.
The patch needs to be backported to stable kernels. A stable tag
is not mentioned below because the patch doesn't apply cleanly
to any actively maintained stable kernel.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-and-tested-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We only want to avoid blocking in connect when mounting SMB root
filesystems, otherwise bail out from generic_ip_connect() so cifs.ko
can perform any reconnect failover appropriately.
This fixes DFS failover/reconnection tests in upstream buildbot.
Fixes: 8eecd1c2e5 ("cifs: Add support for root file systems")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Message was intended only for developer temporary build
In addition cleanup two minor warnings noticed by Coverity
and a trivial change to workaround a sparse warning
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Introduce a new CONFIG_CIFS_ROOT option to handle root file systems
over a SMB share.
In order to mount the root file system during the init process, make
cifs.ko perform non-blocking socket operations while mounting and
accessing it.
Cc: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
In some cases to work around server bugs or performance
problems it can be helpful to be able to disable requesting
SMB2.1/SMB3 leases on a particular mount (not to all servers
and all shares we are mounted to). Add new mount parm
"nolease" which turns off requesting leases on directory
or file opens. Currently the only way to disable leases is
globally through a module load parameter. This is more
granular.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Displayed in /proc/fs/cifs/Stats once for each
socket we are connected to.
This allows us to find out what the maximum number of
requests that had been in flight (at any one time). Note that
/proc/fs/cifs/Stats can be reset if you want to look for
maximum over a small period of time.
Sample output (immediately after mount):
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 5 maximum at one time: 2
Max requests in flight: 2
1) \\localhost\scratch
SMBs: 18
Bytes read: 0 Bytes written: 0
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Disable offload of the decryption of encrypted read responses
by default (equivalent to setting this new mount option "esize=0").
Allow setting the minimum encrypted read response size that we
will choose to offload to a worker thread - it is now configurable
via on a new mount option "esize="
Depending on which encryption mechanism (GCM vs. CCM) and
the number of reads that will be issued in parallel and the
performance of the network and CPU on the client, it may make
sense to enable this since it can provide substantial benefit when
multiple large reads are in flight at the same time.
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add new mount option "signloosely" which enables signing but skips the
sometimes expensive signing checks in the responses (signatures are
calculated and sent correctly in the SMB2/SMB3 requests even with this
mount option but skipped in the responses). Although weaker for security
(and also data integrity in case a packet were corrupted), this can provide
enough of a performance benefit (calculating the signature to verify a
packet can be expensive especially for large packets) to be useful in
some cases.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If the server config (e.g. Samba smb.conf "csc policy = disable)
for the share indicates that the share should not be cached, log
a warning message if forced client side caching ("cache=ro" or
"cache=singleclient") is requested on mount.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is known to be only to be accessed by one client, we
can aggressively cache writes not just reads to it.
Add "cache=" option (cache=singleclient) for mounting read write shares
(that will not be read or written to from other clients while we have
it mounted) in order to improve performance.
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some additional logging so the user can see if the share they
mounted with cache=ro is considered read only by the server
CIFS: Attempting to mount //localhost/test
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: read only mount of RW share
CIFS: Attempting to mount //localhost/test-ro
CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use.
CIFS VFS: mounted to read only share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If a share is immutable (at least for the period that it will
be mounted) it would be helpful to not have to revalidate
dentries repeatedly that we know can not be changed remotely.
Add "cache=" option (cache=ro) for mounting read only shares
in order to improve performance in cases in which we know that
the share will not be changing while it is in use.
Signed-off-by: Steve French <stfrench@microsoft.com>
which can be used from contexts where we have a TCP_Server_Info *server.
This new macro will prepend the debugging string with "Server:<servername> "
which will help when debugging issues on hosts with many cifs connections
to several different servers.
Convert a bunch of cifs_dbg(VFS) calls to cifs_server_dbg(VFS)
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using strscpy is cleaner, and avoids some problems with
handling maximum length strings. Linus noticed the
original problem and Aurelien pointed out some additional
problems. Fortunately most of this is SMB1 code (and
in particular the ASCII string handling older, which
is less common).
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's safer to zero out the password so that it can never be disclosed.
Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1710429
When we use a domain-key to authenticate using multiuser we must also set
the domainnmame for the new volume as it will be used and passed to the server
in the NTLMSSP Domain-name.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd. I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN. So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.
Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig. As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL. Which after the first signal will allow userspace
to send signals to these kernel threads. At least for
wake_ack_receiver in drbd that does not appear actively wrong.
So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.
Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.
This change was partly inspired by similar cifs and drbd patches that
added allow_signal.
Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 72abe3bcf0 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
The global change from force_sig caused module unloading of cifs.ko
to fail (since the cifsd process could not be killed, "rmmod cifs"
now would always fail)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=bdbT
-----END PGP SIGNATURE-----
Merge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Fixes (three for stable) and improvements including much faster
encryption (SMB3.1.1 GCM)"
* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
smb3: smbdirect no longer experimental
cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
cifs: fix crash in cifs_dfs_do_automount
cifs: fix parsing of symbolic link error response
cifs: refactor and clean up arguments in the reparse point parsing
SMB3: query inode number on open via create context
smb3: Send netname context during negotiate protocol
smb3: do not send compression info by default
smb3: add new mount option to retrieve mode from special ACE
smb3: Allow query of symlinks stored as reparse points
cifs: Fix a race condition with cifs_echo_request
cifs: always add credits back for unsolicited PDUs
fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
add some missing definitions
cifs: fix typo in debug message with struct field ia_valid
smb3: minor cleanup of compound_send_recv
CIFS: Fix module dependency
cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
cifs: Fix check for matching with existing mount
cifs: Properly handle auto disabling of serverino option
...
RHBZ: 1649907
Fix a crash that happens while attempting to mount a DFS referral from the same server on the root of a filesystem.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
Since in theory a server could respond with compressed read
responses even if not requested on read request (assuming that
a compression negcontext is sent in negotiate protocol) - do
not send compression information during negotiate protocol
unless the user asks for compression explicitly (compression
is experimental), and add a mount warning that compression
is experimental.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a special ACE used by some servers to allow the mode
bits to be stored. This can be especially helpful in scenarios
in which the client is trusted, and access checking on the
client vs the POSIX mode bits is sufficient.
Add mount option to allow enabling this behavior.
Follow on patch will add support for chmod and queryinfo
(stat) by retrieving the POSIX mode bits from the special
ACE, SID: S-1-5-88-3
See e.g.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.
Summary of the race condition:
1) Daisy chaining scheduling creates a gap.
2) If traffic comes unfortunate shortly after
the last echo, the planned echo is suppressed.
3) Due to the gap, the next echo transmission is delayed
until after the timeout, which is set hard to twice
the echo interval.
This is fixed by changing the timeouts from 2 to three times the echo interval.
Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
not just if CONFIG_CIFS_DEBUG2 is enabled.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
When using multidialect negotiate (default or specifying vers=3.0 which
allows any smb3 dialect), fix how we check for an existing server session.
Before this fix if you mounted a second time to the same server (e.g. a
different share on the same server) we would only reuse the existing smb
session if a single dialect were requested (e.g. specifying vers=2.1 or vers=3.0
or vers=3.1.1 on the mount command). If a default mount (e.g. not
specifying vers=) is done then would always create a new socket connection
and SMB3 (or SMB3.1.1) session each time we connect to a different share
on the same server rather than reusing the existing one.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
We can not hold the GlobalMid_Lock spinlock during the
dfs processing in cifs_reconnect since it invokes things that may sleep
and thus trigger :
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23
Thus we need to drop the spinlock during this code block.
RHBZ: 1716743
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change). The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.
Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal. The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.
So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.
Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Jeff Layton <jlayton@primarydata.com>
Cc: Steve French <smfrench@gmail.com>
Fixes: a5c3e1c725 ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
Fixes: e7ddee9037 ("cifs: disable sharing session and tcon and add new TCP sharing code")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
SMBDirect manages its own ports in the transport layer, there is no need to
check the port to find a connection.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie sahlberg <lsahlber@redhat.com>
commit 214bab4484 ("cifs: Call MID callback before destroying transport")
assumes that the MID callback should not take srv_mutex, this may not always
be true. SMB Direct requires the MID callback completed before calling
transport so all pending memory registration can be freed. So restore the
original calling sequence so TCP transport will use the same code, but moving
smbd_destroy() after all MID has been called.
fixes: 214bab4484 ("cifs: Call MID callback before destroying transport")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When transport is being destroyed, it's possible that some processes may
hold memory registrations that need to be deregistred.
Call them first so nobody is using transport resources, and it can be
destroyed.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On transport recoonect, upper layer CIFS code destroys the current
transport and then recoonect. This code path is not used by SMBD, in that
SMBD destroys its transport on RDMA disconnect notification independent of
CIFS upper layer behavior.
This approach adds some costs to SMBD layer to handle transport shutdown
and restart, and to deal with several racing conditions on reconnecting
transport.
Re-work this code path by introducing a new smbd_destroy. This function is
called form upper layer to ask SMBD to destroy the transport. SMBD will no
longer need to destroy the transport by itself while worrying about data
transfer is in progress. The upper layer guarantees the transport is
locked.
change log:
v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As per MS-DFSC, when a DFS cache entry is expired and it is a DFS
link, then a new DFS referral must be sent to root server in order to
refresh the expired entry.
This patch ensures that all new DFS referrals for refreshing the cache
are sent to DFS root.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reconnecting after server or network failure can be improved
(to maintain availability and protect data integrity) by allowing
the client to choose the default persistent (or resilient)
handle timeout in some use cases. Today we default to 0 which lets
the server pick the default timeout (usually 120 seconds) but this
can be problematic for some workloads. Add the new mount parameter
to cifs.ko for SMB3 mounts "handletimeout" which enables the user
to override the default handle timeout for persistent (mount
option "persistenthandles") or resilient handles (mount option
"resilienthandles"). Maximum allowed is 16 minutes (960000 ms).
Units for the timeout are expressed in milliseconds. See
section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol
specification for more information.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Detected by CoverityScan CID#1438719 ("Unused Value")
buf is reset again before being used so these two lines of code
are useless.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Introduce new struct cifs_credits
which contains both credits value and reconnect instance of the
time those credits were taken. Modify a routine that add credits
back to handle the reconnect instance by assuming zero credits
if the reconnect happened after the credits were obtained and
before we decided to add them back due to some errors during sending.
This patch fixes the MTU credits cases. The subsequent patch
will handle non-MTU ones.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we set reconnect instance to zero on the first
connection but this is not convenient because we need to
reserve some special value for credit handling on reconnects
which is coming in subsequent patches. Fix this by starting
with one when initiating a new TCP connection.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Even if a response is malformed, we should count credits
granted by the server to avoid miscalculations and unnecessary
reconnects due to client or server bugs. If the response has
been received partially, the session will be reconnected anyway
on the next iteration of the demultiplex thread, so counting
credits for such cases shouldn't break things.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We negotiate rsize mounts (and it can be overridden by user) to
typically 4MB, so using larger default I/O sizes from userspace
(changing to 1MB default i/o size returned by stat) the
performance is much better (and not just for long latency
network connections) in most use cases for SMB3 than the default I/O
size (which ends up being 128K for cp and can be even smaller for cp).
This can be 4x slower or worse depending on network latency.
By changing inode->blocksize from 32K (which was perhaps ok
for very old SMB1/CIFS) to a larger value, 1MB (but still less than
max size negotiated with the server which is 4MB, in order to minimize
risk) it significantly increases performance for the
noncached case, and slightly increases it for the cached case.
This can be changed by the user on mount (specifying bsize=
values from 16K to 16MB) to tune better for performance
for applications that depend on blocksize.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
We should add any credits granted to us from unmatched server responses.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.
In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.
However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.
See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a NULL pointer dereference of devname in strspn()
The oops looks something like:
CIFS: Attempting to mount (null)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:strspn+0x0/0x50
...
Call Trace:
? cifs_parse_mount_options+0x222/0x1710 [cifs]
? cifs_get_volume_info+0x2f/0x80 [cifs]
cifs_setup_volume_info+0x20/0x190 [cifs]
cifs_get_volume_info+0x50/0x80 [cifs]
cifs_smb3_do_mount+0x59/0x630 [cifs]
? ida_alloc_range+0x34b/0x3d0
cifs_do_mount+0x11/0x20 [cifs]
mount_fs+0x52/0x170
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on devname in cifs_parse_devname()
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky