1
0
Fork 0
Commit Graph

155 Commits (4800bf7bc8c725e955fcbc6191cc872f43f506d3)

Author SHA1 Message Date
Sascha Hauer 1e76592f2c ubifs: Do not update inode size in-place in authenticated mode
In authenticated mode we cannot fixup the inode sizes in-place
during recovery as this would invalidate the hashes and HMACs
we stored for this inode.

Instead, we just write the updated inodes to the journal. We can
only do this after ubifs_rcvry_gc_commit() is done though, so for
authenticated mode call ubifs_recover_size() after
ubifs_rcvry_gc_commit() and not vice versa as normally done.

Calling ubifs_recover_size() after ubifs_rcvry_gc_commit() has the
drawback that after a commit the size fixup information is gone, so
when a powercut happens while recovering from another powercut
we may lose some data written right before the first powercut.
This is why we only do this in authenticated mode and leave the
behaviour for unauthenticated mode untouched.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:57 +02:00
Sascha Hauer b5b1f08369 ubifs: Create hash for default LPT
During creation of the default filesystem on an empty flash the default
LPT is created. With this patch a hash over the default LPT is
calculated which can be added to the default filesystems master node.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:56 +02:00
Sascha Hauer 625700ccb5 ubfis: authentication: Authenticate master node
The master node contains hashes over the root index node and the LPT.
This patch adds a HMAC to authenticate the master node itself.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:52 +02:00
Sascha Hauer a1dc58140f ubifs: authentication: Authenticate LPT
The LPT needs to be authenticated aswell. Since the LPT is only written
during commit it is enough to authenticate the whole LPT with a single
hash which is stored in the master node. Only the leaf nodes (pnodes)
are hashed which makes the implementation much simpler than it would be
to hash the complete LPT.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:47 +02:00
Sascha Hauer 6a98bc4614 ubifs: Add authentication nodes to journal
Nodes that are written to flash can only be authenticated through the
index after the next commit. When a journal replay is necessary the
nodes are not yet referenced by the index and thus can't be
authenticated.

This patch overcomes this situation by creating a hash over all nodes
beginning from the commit start node over the reference node(s) and
the buds themselves. From
time to time we insert authentication nodes. Authentication nodes
contain a HMAC from the current hash state, so that they can be
used to authenticate a journal replay up to the point where the
authentication node is. The hash is continued afterwards
so that theoretically we would only have to check the HMAC of
the last authentication node we find.

Overall we get this picture:

,,,,,,,,
,......,...........................................
,. CS  ,               hash1.----.           hash2.----.
,.  |  ,                    .    |hmac            .    |hmac
,.  v  ,                    .    v                .    v
,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ...
,..|...,...........................................
,  |   ,
,  |   ,,,,,,,,,,,,,,,
.  |            hash3,----.
,  |                 ,    |hmac
,  v                 ,    v
, REF#1 -> bud -> bud,-> auth ...
,,,|,,,,,,,,,,,,,,,,,,
   v
  REF#2 -> ...
   |
   V
  ...

Note how hash3 covers CS, REF#0 and REF#1 so that it is not possible to
exchange or skip any reference nodes. Unlike the picture suggests the
auth nodes themselves are not hashed.

With this it is possible for an offline attacker to cut each journal
head or to drop the last reference node(s), but not to skip any journal
heads or to reorder any operations.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:39 +02:00
Sascha Hauer 16a26b20d2 ubifs: authentication: Add hashes to index nodes
With this patch the hashes over the index nodes stored in the tree node
cache are written to flash and are checked when read back from flash.
The hash of the root index node is stored in the master node.

During journal replay the hashes are regenerated from the read nodes
and stored in the tree node cache. This means the nodes must previously
be authenticated by other means. This is done in a later patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:39 +02:00
Sascha Hauer 823838a486 ubifs: Add hashes to the tree node cache
As part of the UBIFS authentication support every branch in the index
gets a hash covering the referenced node. To make that happen the tree
node cache needs hashes over the nodes. This patch adds a hash argument
to ubifs_tnc_add() and ubifs_tnc_add_nm(). The hashes are calculated
from the callers of these functions which actually prepare the nodes.
With this patch all the leaf nodes of the index tree get hashes, but
currently nothing is done with these hashes, this is left for a later
patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:39 +02:00
Sascha Hauer a384b47e49 ubifs: Create functions to embed a HMAC in a node
With authentication support some nodes (master node, super block node)
get a HMAC embedded into them. This patch adds functions to prepare and
write such a node.
The difficulty is that besides the HMAC the nodes also have a CRC which
must stay valid. This means we first have to initialize all fields in
the node, then calculate the HMAC (not covering the CRC) and finally
calculate the CRC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:37 +02:00
Sascha Hauer 49525e5eec ubifs: Add helper functions for authentication support
This patch adds the various helper functions needed for authentication
support. We need functions to hash nodes, to embed HMACs into a node and
to compare hashes and HMACs. Most functions first check if this
filesystem is authenticated and bail out early if not, which makes the
functions safe to be called with disabled authentication.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:33 +02:00
Sascha Hauer dead97266f ubifs: Add separate functions to init/crc a node
When adding authentication support we will embed a HMAC into some
nodes. To prepare these nodes we have to first initialize the nodes,
then add a HMAC and finally add a CRC. To accomplish this add separate
ubifs_init_node/ubifs_crc_node functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:29 +02:00
Sascha Hauer fd6150051b ubifs: Store read superblock node
The superblock node is read/modified/written several times throughout
the UBIFS code. Instead of reading it from the device each time just
keep a copy in memory and write back the modified copy when necessary.
This patch helps for authentication support, here we not only have to
read the superblock node, but also have to authenticate it, which
is easier if we do it once during initialization.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:29 +02:00
Sascha Hauer 0e26b6e255 ubifs: Export pnode_lookup as ubifs_pnode_lookup
ubifs_lpt_lookup could be implemented using pnode_lookup. To make that
possible move pnode_lookup from lpt.c to lpt_commit.c. Rename it to
ubifs_pnode_lookup since it's now exported.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-10-23 13:48:17 +02:00
Richard Weinberger 2e52eb7446 ubifs: Rework ubifs_assert()
With having access to struct ubifs_info in ubifs_assert() we can
give more information when an assert is failing.
By using ubifs_err() we can tell which UBIFS instance failed.

Also multiple actions can be taken now.
We support:
 - report: This is what UBIFS did so far, just report the failure and go
   on.
 - read-only: Switch to read-only mode.
 - panic: shoot the kernel in the head.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Richard Weinberger 6eb61d587f ubifs: Pass struct ubifs_info to ubifs_assert()
This allows us to have more context in ubifs_assert()
and take different actions depending on the configuration.

Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:21 +02:00
Stefan Agner 7e5471ce6d ubifs: introduce Kconfig symbol for xattr support
Allow to disable extended attribute support.

This aids in reliability testing, especially since some xattr
related bugs have surfaced.

Also an embedded system might not need it, so this allows for a
slightly smaller kernel (about 4KiB).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:25:14 +02:00
Arnd Bergmann 6cff573202 ubifs: tnc: use monotonic znode timestamp
The tnc uses get_seconds() based timestamps to check the age of a znode,
which has two problems: on 32-bit architectures this may overflow in
2038 or 2106, and it gives incorrect information when the system time
is updated using settimeofday().

Using montonic timestamps with ktime_get_seconds() solves both thes
problems.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15 00:06:16 +02:00
Linus Torvalds 7a932516f5 vfs/y2038: inode timestamps conversion to timespec64
This is a late set of changes from Deepa Dinamani doing an automated
 treewide conversion of the inode and iattr structures from 'timespec'
 to 'timespec64', to push the conversion from the VFS layer into the
 individual file systems.
 
 There were no conflicts between this and the contents of linux-next
 until just before the merge window, when we saw multiple problems:
 
 - A minor conflict with my own y2038 fixes, which I could address
   by adding another patch on top here.
 - One semantic conflict with late changes to the NFS tree. I addressed
   this by merging Deepa's original branch on top of the changes that
   now got merged into mainline and making sure the merge commit includes
   the necessary changes as produced by coccinelle.
 - A trivial conflict against the removal of staging/lustre.
 - Multiple conflicts against the VFS changes in the overlayfs tree.
   These are still part of linux-next, but apparently this is no longer
   intended for 4.18 [1], so I am ignoring that part.
 
 As Deepa writes:
 
   The series aims to switch vfs timestamps to use struct timespec64.
   Currently vfs uses struct timespec, which is not y2038 safe.
 
   The series involves the following:
   1. Add vfs helper functions for supporting struct timepec64 timestamps.
   2. Cast prints of vfs timestamps to avoid warnings after the switch.
   3. Simplify code using vfs timestamps so that the actual
      replacement becomes easy.
   4. Convert vfs timestamps to use struct timespec64 using a script.
      This is a flag day patch.
 
   Next steps:
   1. Convert APIs that can handle timespec64, instead of converting
      timestamps at the boundaries.
   2. Update internal data structures to avoid timestamp conversions.
 
 Thomas Gleixner adds:
 
   I think there is no point to drag that out for the next merge window.
   The whole thing needs to be done in one go for the core changes which
   means that you're going to play that catchup game forever. Let's get
   over with it towards the end of the merge window.
 
 [1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
 MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
 g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
 L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
 Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
 LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
 nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
 wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
 c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
 tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
 WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
 A3HkjIBrKW5AgQDxfgvm
 =CZX2
 -----END PGP SIGNATURE-----

Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
 "This is a late set of changes from Deepa Dinamani doing an automated
  treewide conversion of the inode and iattr structures from 'timespec'
  to 'timespec64', to push the conversion from the VFS layer into the
  individual file systems.

  As Deepa writes:

   'The series aims to switch vfs timestamps to use struct timespec64.
    Currently vfs uses struct timespec, which is not y2038 safe.

    The series involves the following:
    1. Add vfs helper functions for supporting struct timepec64
       timestamps.
    2. Cast prints of vfs timestamps to avoid warnings after the switch.
    3. Simplify code using vfs timestamps so that the actual replacement
       becomes easy.
    4. Convert vfs timestamps to use struct timespec64 using a script.
       This is a flag day patch.

    Next steps:
    1. Convert APIs that can handle timespec64, instead of converting
       timestamps at the boundaries.
    2. Update internal data structures to avoid timestamp conversions'

  Thomas Gleixner adds:

   'I think there is no point to drag that out for the next merge
    window. The whole thing needs to be done in one go for the core
    changes which means that you're going to play that catchup game
    forever. Let's get over with it towards the end of the merge window'"

* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  pstore: Remove bogus format string definition
  vfs: change inode times to use struct timespec64
  pstore: Convert internal records to timespec64
  udf: Simplify calls to udf_disk_stamp_to_time
  fs: nfs: get rid of memcpys for inode times
  ceph: make inode time prints to be long long
  lustre: Use long long type to print inode time
  fs: add timespec64_truncate()
2018-06-15 07:31:07 +09:00
Sascha Hauer c971dad849 ubifs: remove set but never used variable
replay_sqnum is set but never used. Remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07 15:53:14 +02:00
Deepa Dinamani 95582b0083 vfs: change inode times to use struct timespec64
struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
2018-06-05 16:57:31 -07:00
Linus Torvalds 1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Eric Biggers f7293e48bb fscrypt: remove ->is_encrypted()
Now that all callers of fscrypt_operations.is_encrypted() have been
switched to IS_ENCRYPTED(), remove ->is_encrypted().

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18 19:52:37 -04:00
Dave Chinner 734f0d241d fscrypt: clean up include file mess
Filesystems have to include different header files based on whether they
are compiled with encryption support or not. That's nasty and messy.

Instead, rationalise the headers so we have a single include fscrypt.h
and let it decide what internal implementation to include based on the
__FS_HAS_ENCRYPTION define.  Filesystems set __FS_HAS_ENCRYPTION to 1
before including linux/fscrypt.h if they are built with encryption
support.  Otherwise, they must set __FS_HAS_ENCRYPTION to 0.

Add guards to prevent fscrypt_supp.h and fscrypt_notsupp.h from being
directly included by filesystems.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
[EB: use 1 and 0 rather than defined/undefined]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-18 19:52:36 -04:00
Xiaolei Li d8db5b1ca9 ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs
The inode is not locked in init_xattrs when creating a new inode.

Without this patch, there will occurs assert when booting or creating
a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled.

Log likes:

UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156)
CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2
Hardware name: MediaTek MT2712 evaluation board (DT)
Call trace:
[<ffff000008088538>] dump_backtrace+0x0/0x238
[<ffff000008088834>] show_stack+0x14/0x20
[<ffff0000083d98d4>] dump_stack+0x9c/0xc0
[<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0
[<ffff00000835d7ec>] init_xattrs+0x5c/0xb8
[<ffff000008385788>] security_inode_init_security+0x110/0x190
[<ffff00000835e058>] ubifs_init_security+0x30/0x68
[<ffff00000833ada0>] ubifs_mkdir+0x100/0x200
[<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8
[<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0
[<ffff000008082f8c>] __sys_trace_return+0x0/0x4

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:50:54 +02:00
Richard Weinberger 781f675e2d ubifs: Fix unlink code wrt. double hash lookups
When removing an encrypted file with a long name and without having
the key we have to be able to locate and remove the directory entry
via a double hash. This corner case was simply forgotten.

Fixes: 528e3d178f ("ubifs: Add full hash lookup support")
Reported-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:06 +02:00
Richard Weinberger 272eda8298 ubifs: Correctly evict xattr inodes
UBIFS handles extended attributes just like files, as consequence of
that, they also have inodes.
Therefore UBIFS does all the inode machinery also for xattrs. Since new
inodes have i_nlink of 1, a file or xattr inode will be evicted
if i_nlink goes down to 0 after an unlink. UBIFS assumes this model also
for xattrs, which is not correct.
One can create a file "foo" with xattr "user.test". By reading
"user.test" an inode will be created, and by deleting "user.test" it
will get evicted later. The assumption breaks if the file "foo", which
hosts the xattrs, will be removed. VFS nor UBIFS does not remove each
xattr via ubifs_xattr_remove(), it just removes the host inode from
the TNC and all underlying xattr nodes too and the inode will remain
in the cache and wastes memory.

To solve this problem, remove xattr inodes from the VFS inode cache in
ubifs_xattr_remove() to make sure that they get evicted.

Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:49:04 +02:00
Richard Weinberger e996bfd428 ubifs: Unexport ubifs_inode_slab
This SLAB is only being used in super.c, there is no need to expose
it into the global namespace.

Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-14 22:48:43 +02:00
Linus Torvalds b53c4d5eb7 This pull request contains updates for both UBI and UBIFS:
- New config option CONFIG_UBIFS_FS_SECURITY
 - Minor improvements
 - Random fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZFuwKAAoJEEtJtSqsAOnWYrUP/0/y7PEh0ZGdi4kkQy/CnuJr
 pmybsQ0TbLoljahuDXqShKkMNvuXIvKSKcHROIsXreG+DCfC3v/srZlvRt7UCPOE
 QVvjh0sQTaMUrfcaTTM9g3Im/BZX9MueTaSF2Rgx1lF+R2t3InW1bv9hvmQxfoEA
 N75tJgH69mii5pDWuGgLLjmmxhbSkMGpM31QeO5DUaLRqdXcc5L5iK5Hnd+Wtj81
 oSB5RsergCfk17jaWH2e7G03LB2tm6AhM5oksTOpZ9+OIW9GOiUMfjYFC2ZYRwzx
 zHhnh0rGPfFv0jO5u4CXtWaQDfxyw6Z7XLK+Xo1RemkhM/7AQl2xetfIVDXErgoA
 NxxN/a8MWcEpJ2x6y/Z8740HXjyQjt9h3nHzlVPNP8hz68J796E7UzRjCQtf7Iyh
 xqhfjMabxfBqcLkTESvgmjcuwo1IkqOaFBjIw2Cd2nfBEkCKzoaINjRHitgUGj/z
 Mm1CJNWvaK6QTdZ3iCETCyPQI02A+4ZXhDf/QZS3wRAMc1v45pS/dVeBn+0F8Nrc
 ASiQwcd7u1IfJa3A6d6DgMECUWBXjc1GGMfMyhS/ta56pOfe1RyR3bg9WuISqUMe
 86id9tiSs7cP2UVFTrFFFWAO3rATj+9cOO9f2LTujPzcd88cJhKSykaLPmELfyE9
 YUPw9lpExwyXLn7S46LQ
 =9ZJe
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:

 - new config option CONFIG_UBIFS_FS_SECURITY

 - minor improvements

 - random fixes

* tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Add debugfs file for tracking PEB state
  ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
  ubifs: Remove unnecessary assignment
  ubifs: Fix cut and paste error on sb type comparisons
  ubi: fastmap: Fix slab corruption
  ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
  ubi: Make mtd parameter readable
  ubi: Fix section mismatch
2017-05-13 10:23:12 -07:00
Hyunchul Lee 8326c1eec2 ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
When write syscall is called, every time security label is searched to
determine that file's privileges should be changed.
If LSM(Linux Security Model) is not used, this is useless.

So introduce CONFIG_UBIFS_SECURITY to disable security labels. it's default
value is "y".

Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08 20:48:23 +02:00
Jan Kara 99edd4580b ubifs: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.

CC: Richard Weinberger <richard@nod.at>
CC: Artem Bityutskiy <dedekind1@gmail.com>
CC: Adrian Hunter <adrian.hunter@intel.com>
CC: linux-mtd@lists.infradead.org
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
David Howells a528d35e8b statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02 20:51:15 -05:00
Eric Biggers 6f69f0ed61 fscrypt: constify struct fscrypt_operations
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Richard Weinberger <richard@nod.at>
2017-02-08 10:59:57 -05:00
Eric Biggers 46f47e4800 fscrypt: split supp and notsupp declarations into their own headers
Previously, each filesystem configured without encryption support would
define all the public fscrypt functions to their notsupp_* stubs.  This
list of #defines had to be updated in every filesystem whenever a change
was made to the public fscrypt functions.  To make things more
maintainable now that we have three filesystems using fscrypt, split the
old header fscrypto.h into several new headers.  fscrypt_supp.h contains
the real declarations and is included by filesystems when configured
with encryption support, whereas fscrypt_notsupp.h contains the inline
stubs and is included by filesystems when configured without encryption
support.  fscrypt_common.h contains common declarations needed by both.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-06 23:26:43 -05:00
Richard Weinberger ec9160dacd ubifs: Use fscrypt ioctl() helpers
Commit db717d8e26 ("fscrypto: move ioctl processing more fully into
common code") moved ioctl() related functions into fscrypt and offers
us now a set of helper functions.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
2016-12-13 19:54:52 +01:00
Richard Weinberger e021986ee4 ubifs: Implement UBIFS_FLG_ENCRYPTION
This feature flag indicates that the filesystem contains encrypted
files.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger d63d61c169 ubifs: Implement UBIFS_FLG_DOUBLE_HASH
This feature flag indicates that all directory entry nodes have a 32bit
cookie set and therefore UBIFS is allowed to perform lookups by hash.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger cc41a53652 ubifs: Use a random number for cookies
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger 528e3d178f ubifs: Add full hash lookup support
UBIFS stores a 32bit hash of every file, for traditional lookups by name
this scheme is fine since UBIFS can first try to find the file by the
hash of the filename and upon collisions it can walk through all entries
with the same hash and do a string compare.
When filesnames are encrypted fscrypto will ask the filesystem for a
unique cookie, based on this cookie the filesystem has to be able to
locate the target file again. With 32bit hashes this is impossible
because the chance for collisions is very high. Do deal with that we
store a 32bit cookie directly in the UBIFS directory entry node such
that we get a 64bit cookie (32bit from filename hash and the dent
cookie). For a lookup by hash UBIFS finds the entry by the first 32bit
and then compares the dent cookie. If it does not match, it has to do a
linear search of the whole directory and compares all dent cookies until
the correct entry is found.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger f4f61d2cc6 ubifs: Implement encrypted filenames
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger 7799953b34 ubifs: Implement encrypt/decrypt for all IO
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger 1ee77870c9 ubifs: Constify struct inode pointer in ubifs_crypt_is_encrypted()
...and provide a non const variant for fscrypto

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger d475a50745 ubifs: Add skeleton for fscrypto
This is the first building block to provide file level
encryption on UBIFS.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger ade46c3a60 ubifs: Export xattr get and set functions
For fscrypto we need this function outside of xattr.c.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Richard Weinberger f6337d8426 ubifs: Export ubifs_check_dir_empty()
fscrypto will need this function too. Also get struct ubifs_info
from the provided inode. Not all callers will have a reference to
struct ubifs_info.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:07:38 +01:00
Rafał Miłecki 1b7fc2c006 ubifs: Use dirty_writeback_interval value for wbuf timer
Right now wbuf timer has hardcoded timeouts and there is no place for
manual adjustments. Some projects / cases many need that though. Few
file systems allow doing that by respecting dirty_writeback_interval
that can be set using sysctl (dirty_writeback_centisecs).

Lowering dirty_writeback_interval could be some way of dealing with user
space apps lacking proper fsyncs. This is definitely *not* a perfect
solution but we don't have ideal (user space) world. There were already
advanced discussions on this matter, mostly when ext4 was introduced and
it wasn't behaving as ext3. Anyway, the final decision was to add some
hacks to the ext4, as trying to fix whole user space or adding new API
was pointless.

We can't (and shouldn't?) just follow ext4. We can't e.g. sync on close
as this would cause too many commits and flash wearing. On the other
hand we still should allow some trade-off between -o sync and default
wbuf timeout. Respecting dirty_writeback_interval should allow some sane
cutomizations if used warily.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:06:24 +01:00
Rafał Miłecki 854826c9d5 ubifs: Drop softlimit and delta fields from struct ubifs_wbuf
Values of these fields are set during init and never modified. They are
used (read) in a single function only. There isn't really any reason to
keep them in a struct. It only makes struct just a bit bigger without
any visible gain.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-12-12 23:06:11 +01:00
Richard Weinberger 9ec64962af ubifs: Implement RENAME_EXCHANGE
Adds RENAME_EXCHANGE to UBIFS, the operation itself
is completely disjunct from a regular rename() that's
why we dispatch very early in ubifs_reaname().

RENAME_EXCHANGE used by the renameat2() system call
allows the caller to exchange two paths atomically.
Both paths have to exist and have to be on the same
filesystem.

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02 22:55:02 +02:00
Richard Weinberger 9e0a1fff8d ubifs: Implement RENAME_WHITEOUT
Adds RENAME_WHITEOUT support to UBIFS, we implement
it in the same way as ext4 and xfs do.
For an overview of other ways to implement it please
refere to commit 7dcf5c3e45 ("xfs: add RENAME_WHITEOUT support").

Signed-off-by: Richard Weinberger <richard@nod.at>
2016-10-02 22:55:02 +02:00
Daniel Golle 380bc8b710 ubifs: Update comment for ubifs_errc
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-07-29 23:30:26 +02:00
Linus Torvalds ba5a2655c2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull remaining vfs xattr work from Al Viro:
 "The rest of work.xattr (non-cifs conversions)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: Switch to generic xattr handlers
  ubifs: Switch to generic xattr handlers
  jfs: Switch to generic xattr handlers
  jfs: Clean up xattr name mapping
  gfs2: Switch to generic xattr handlers
  ceph: kill __ceph_removexattr()
  ceph: Switch to generic xattr handlers
  ceph: Get rid of d_find_alias in ceph_set_acl
2016-05-18 10:08:45 -07:00
Andreas Gruenbacher 2b88fc21ca ubifs: Switch to generic xattr handlers
Ubifs internally uses special inodes for storing xattrs. Those inodes
had NULL {get,set,remove}xattr inode operations before this change, so
xattr operations on them would fail. The super block's s_xattr field
would also apply to those special inodes. However, the inodes are not
visible outside of ubifs, and so no xattr operations will ever be
carried out on them anyway.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-17 19:16:23 -04:00