We apply the codec resume forcibly at system resume callback for
updating and syncing the jack detection state that may have changed
during sleeping. This is, however, superfluous for the codec like
Intel HDMI/DP, where the jack detection is managed via the audio
component notification; i.e. the jack state change shall be reported
sooner or later from the graphics side at mode change.
This patch changes the codec resume callback to avoid the forcible
resume conditionally with a new flag, codec->relaxed_resume, for
reducing the resume time. The flag is set in the codec probe.
Although this doesn't fix the entire bug mentioned in the bugzilla
entry below, it's still a good optimization and some improvements are
seen.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Along with the recent fix for the races of snd_hdac_refresh_widgets()
it turned out that the instantiation of widgets sysfs at
snd_hdac_sysfs_reinit() could cause a race. The race itself was
already covered later by extending the mutex protection range, the
commit 98482377dc ("ALSA: hda: Fix widget_mutex incomplete
protection"), but this also indicated that the call of *_reinit() is
basically superfluous, as the widgets shall be created sooner or later
from snd_hdac_device_register().
This patch removes the redundant call of snd_hdac_sysfs_reinit() at
first. By this removal, the sysfs argument itself in
snd_hdac_refresh_widgets() becomes superfluous, too, because the only
case sysfs=false is always with codec->widgets=NULL. So, we drop this
redundant argument as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
you might feel like a deja vu to receive a bulk of changes at rc5,
and it happens again; we've got a collection of fixes for ASoC.
Most of fixes are targeted for the newly merged SOF (Sound Open
Firmware) stuff and the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent
ASoC core changes and HD-audio quirk, as well as a couple of
FireWire fixes and for other ASoC codecs.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl0DY4YOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/X9BAAzLc3OXBQhnQfFGvAmW8ro/bRuhwg3KjptwNe
Zd/y6V4ru2Lhuqbr+EZMZqu665EkTg1CpHydMwsmD7bbmi47Xet7ocufjQMgHKcX
l+QVRvzB+Ve5ARdUww8B6jqoc7CvZiM/tcW9VP3kphXOD4/iY1VcnRbVzHGYrAgI
drLCnlC91Z5ssWPmAjuju6vZUwqCQupALs0wtdRFnwRonz0sCcPKjKzPAoS6KVQS
6kzRW3nLqKMpatbXdaSjb5tdVxRax8042sqaCqppvE1ToxvkbvSZykOwLQGDdCDn
zkHUv+hmS76IV2Q4baCkAl4fkborKOJXgNQnoxQ5VDbOzBbOMy6867jQ+Y3gEx8k
UqGpS2AA46c3pQcUvos0KqqHaSe3ESP2sH02k0BWWpmnyo927MAYE7qm80BnqjmJ
emXXs0I5u5MkUBb00jP2QpvZqhoKzRLD84BWuHSlg5gIDCQ1cn1WIQaq8YIT4+Bf
V50QUZMPI3PIw1g81XYLZXbhT/0b3zurOOhwEChPyJdz1ZoIyEeGMxt1rsZWD64B
qn24AzRfIQTDteIYUmYovUtzZeFcAqQDsbtLQa98BzDHAYhvJEc+1bbT/NYgtv7/
zJqeFX9CbOcDihmiThvZKVAfThQeUCSWFBXk5JgBxs19uUa4et7XCHbXmPeyBJiq
gF2xAhs=
=9U0L
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It might feel like deja vu to receive a bulk of changes at rc5, and it
happens again; we've got a collection of fixes for ASoC. Most of fixes
are targeted for the newly merged SOF (Sound Open Firmware) stuff and
the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent ASoC
core changes and HD-audio quirk, as well as a couple of FireWire fixes
and for other ASoC codecs"
* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
ASoC: SOF: fix DSP oops definitions in FW ABI
...
There's an awful lot of fixes here, almost all for the newly introduced
SoF DSP drivers (including a few things it turned up in shared code).
This is a large and complex piece of code so it's not surprising that
there have been quite a few issues here, fortunately things seem to have
mostly calmed down now. Otherwise there's just a smattering of small fixes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0CaS4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Ia0B/9wO0pSbtZjH63zg6khj+HQKuw5HG+5
3tYMZml0c/vAmJxHCPlgGZRwRSq7rFCyJS+e4bBMCfWdjHtFuFkZtQ+jNbOxN5vf
50/L/ixXs/iWQ4u9CV7wBUSTQgqQav4T5KWCQcYcY56hR20ubmT8K/MFTYOVIwhs
VftWpUThi/onqgRoO08ZyKjcIoqJK9UqvNllSbCb2qY2zgCc9GmWcWbtTYKbFsLP
czcHx9Wid0k3FlY+FqleGRyre7m1Gun94cxc3MQFOt7CO47x8gVQdMJVI+iAwRlQ
5Fz+l+7oaYYpAgLhdrw0scHGU58C46h3KCQmAhYUk8NzqLB9ev6QGe18
=SMgt
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.2-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.2
There's an awful lot of fixes here, almost all for the newly introduced
SoF DSP drivers (including a few things it turned up in shared code).
This is a large and complex piece of code so it's not surprising that
there have been quite a few issues here, fortunately things seem to have
mostly calmed down now. Otherwise there's just a smattering of small fixes.
HDA_DEV_ASOC type codec device refcounts are managed differently
from HDA_DEV_LEGACY devices. The refcount is released explicitly
in snd_hdac_ext_bus_device_remove() for ASOC type devices.
So, remove the put_device() call in snd_hda_codec_dev_free()
for such devices to make the refcount balanced. This will prevent
the NULL pointer exception when the codec driver is released
after the card is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
For code simplification and safety, use struct_size() macro for
calculating the hda_conn_list object size with the variable array.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this driver is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this driver is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 18 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.186505395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_hda_codec_device_new() is used by both legacy HDA and ASoC
driver. However, we will call snd_hdac_device_unregister() in
snd_hdac_ext_bus_device_remove() for ASoC device. This patch uses
the type flag in hdac_device struct to determine is it a ASoC device
or legacy HDA device and call snd_hdac_device_unregister() in
snd_hda_codec_dev_free() only if it is a legacy HDA device.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit 98081ca62c ("ALSA: hda - Record the current power
state before suspend/resume calls") made the HD-audio driver to store
the PM state in power_state field. This forgot, however, the
initialization at power up. Although the codec drivers usually don't
need to refer to this field in the normal operation, let's initialize
it properly for consistency.
Fixes: 98081ca62c ("ALSA: hda - Record the current power state before suspend/resume calls")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently we found the audio jack detection stop working after suspend
on many machines with Realtek codec. Sometimes the audio selection
dialogue didn't show up after users plugged headhphone/headset into
the headset jack, sometimes after uses plugged headphone/headset, then
click the sound icon on the upper-right corner of gnome-desktop, it
also showed the speaker rather than the headphone.
The root cause is that before suspend, the codec already call the
runtime_suspend since this codec is not used by any apps, then in
resume, it will not call runtime_resume for this codec. But for some
realtek codec (so far, alc236, alc255 and alc891) with the specific
BIOS, if it doesn't run runtime_resume after suspend, all codec
functions including jack detection stop working anymore.
This problem existed for a long time, but it was not exposed, that is
because when problem happens, if users play sound or open
sound-setting to check audio device, this will trigger calling to
runtime_resume (via snd_hda_power_up), then the codec starts working
again before users notice this problem.
Since we don't know how many codec and BIOS combinations have this
problem, to fix it, let the driver call runtime_resume for all codecs
in pm_resume, maybe for some codecs, this is not needed, but it is
harmless. After a codec is runtime resumed, if it is not used by any
apps, it will be runtime suspended soon and furthermore we don't run
suspend frequently, this change will not add much power consumption.
Fixes: cc72da7d4d ("ALSA: hda - Use standard runtime PM for codec power-save control")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the registration and free of beep input device was done
manually from the register and the disconnect callbacks of the
assigned codec object. This seems working in most cases, but this may
be a cause of some races at probe. Moreover, due to these manual
calls, the total code became unnecessarily lengthy.
This patch rewrites the beep registration code to follow the standard
sound device object style. This allows us reducing the code, in
addition to avoiding the nested device registration calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we deal with single codec and suspend codec callbacks for
all S3, S4 and runtime PM handling. But it turned out that we want
distinguish the call patterns sometimes, e.g. for applying some init
sequence only at probing and restoring from hibernate.
This patch slightly modifies the common PM callbacks for HD-audio
codec and stores the currently processed PM event in power_state of
the codec's device.power field, which is currently unused. The codec
callback can take a look at this event value and judges which purpose
it's being called.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The unused variable was forgotten to be removed and now we get a
compiler warning:
sound/pci/hda/hda_codec.c: In function 'hda_codec_runtime_suspend':
sound/pci/hda/hda_codec.c:2926:18: warning: unused variable 'pcm'
Fixes: 17bc4815de ("ALSA: pci: Remove superfluous snd_pcm_suspend*() calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of snd_pcm_suspend_all() & co became superfluous since we
call it in the PCM PM ops. Let's remove them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting. This patch is a big
surgery for addressing the complexity and the possible unbalance.
Basically the patch changes the display PM in the following ways:
- Both HD-audio controller and codec drivers call a single helper,
snd_hdac_display_power(). (Formerly, the display power control from
a codec was done indirectly via link_power bus ops.)
- snd_hdac_display_power() receives the codec address index. For
turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.
- snd_hdac_display_power() doesn't manage refcounts any longer, but
keeps the power status in bitmap. If any of controller or codecs is
turned on, the function updates the DRM power state via get_power()
or put_power().
Also this refactor allows us more cleanup:
- The link_power bus ops is dropped, so there is no longer indirect
management, as mentioned in the above.
- hdac_device link_power_control flag is moved to hda_codec
display_power_control flag, as it's only for HDA legacy.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset(). This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.
As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.
This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The knew->iface field is in snd_ctl_elem_iface_t, which is with
__bitwise, hence it can't be converted implicitly from integer.
Give an explicit cast for the invalid type.
Spotted by sparse:
sound/pci/hda/hda_codec.c:3280:25: warning: restricted snd_ctl_elem_iface_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split snd_hda_codec_new into two separate functions.
snd_hda_codec_device_init allocates memory and registers with bus.
snd_hda_codec_device_new initialializes the fields and performs
snd_device_new. This enables reuse of legacy HDA codec drivers as ASoC
codec drivers.
In addition mark some functions with EXPORT_SYMBOL_GPL so that it can
be called by ASoC wrapper around the legacy HDA driver (hdac_hda).
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The in_pm atomic in hdac_device is an important field used as a flag
as well as a refcount for PM. The existing snd_hdac_power_up/down
helpers already refer to it in the HD-audio core code, while the code
to actually setting the value (atomic_inc() / _dec()) is open-coded in
HDA legacy side, which is hard to find.
This patch adds the helper functions to set/reset the in_pm counter to
HDA core and use them in HDA legacy side, for making it clearer who /
where the PM is managed.
There is no functional changes, just code refactoring.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.
Let's unify and replace with the latter one consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Henning Kühn reported that the discrete AMD GPU on his hybrid graphics
laptop no longer runtime-suspends due to the recent commit
07f4f97d7b ("vga_switcheroo: Use device link for HDA controller").
The root cause is that the HDMI codec on AMD GPU doesn't support
CLKSTOP and EPSS, which are currently mandatory for powering down the
HD-audio link at runtime suspend. Because the HD-audio link is still
up, HD-audio controller driver blocks the transition to D3.
For addressing the regression, this patch adds a new flag to indicate
the forced link-down, and sets it for AMD HDMI codecs appropriately
in the codec driver.
Fixes: 07f4f97d7b ("vga_switcheroo: Use device link for HDA controller")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106957
Reported-by: Lukas Wunner <lukas@wunner.de>
Reported-and-tested-by: Henning Kühn <prg@cooco.de>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Put WARN_ON() and bail out if the given index is over the allocated
array of the given SPDIF controls. It's merely a sanity check to
catch any potential issues (if any).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element. It slightly improves the readability than
lengthy open codes at each place.
Along with it, add const prefix to some obvious places.
There should be no functional changes by this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since sync_power_state is moved to core it's better to use the helper
function to ensure the actual power state reaches target instead of
using the local helper functions already exsisting in hda code.
Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous fix for addressing the breakage in vmaster slave
initialization, commit a91d66129f ("ALSA: hda - Fix incorrect TLV
callback check introduced during set_fs() removal"), introduced a new
helper to process over each slave kctl. However, this helper passes
only the original kctl, not the virtual slave kctl. As a result,
HD-audio driver (which is the only user so far) couldn't initialize
the slave correctly because it's trying to update the value directly
with the original kctl, not with the mapped kctl.
This patch fixes the situation again by passing both the mapped slaved
and original slave kctls to the function. Luckily there is a single
caller as of now, so changing the call signature is no big matter.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197959
Fixes: a91d66129f ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The refresh of HD-audio widget sysfs kobjects via
snd_hdac_refresh_widget_sysfs() is slightly racy.
The driver recreates the whole tree from scratch after deleting the
whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject
release doesn't happen immediately but delayed, while the re-creation
of the same named kobject happens soon after invoking kobject_put().
This may end up with the conflicts of duplicated kobjects, as found in
the bug report below.
In this patch, we take another approach to refresh the tree: instead
of recreating the whole tree, just add the new nodes and delete the
non-existing nodes. Since the refresh happens only once at
initialization, no longer race would happen.
Along with the code change, merge snd_hdac_refresh_widget_sysfs() with
the existing snd_hdac_refresh_widgets() with an additional bool flag
for simplifying the code.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
forget to filter out invalid pcm numbers, if there is only one invalid pcm
number, then this issue causes we create eld control for invalid pcm silently,
but when there are more than one invalid pcm numbers, then this issue bring
probe error looks like below dmesg:
"
kernel: [ 1.647283] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xc2967540)
kernel: [ 1.651192] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651195] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651197] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651199] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651201] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651203] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651676] snd_hda_intel 0000:00:03.0: control 3:0:0:ELD:0 is already present
kernel: [ 1.651787] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -16
"
This patch add invalid pcm number filter before calling hdmi_create_eld_ctl.
Fixes: fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
set_fs() is used in HD-audio vmaster code to retrieve the TLV data of
each slave kctl. Since the slave is supposed to be a standard amp
kctl, we can call directly the supposed tlv callback instead of the
indirect call, so that we can remove the set_fs() hack.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all the users of this workaround code is gone, and we can finally
remove the legacy codes from the core HD-audio module.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The generic parser is the only user of the bind-mixer controls, so we
can move the code there and clean up the core helper.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new structures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type
const, so snd_kcontrol_new structures having the same property can be
made const too.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct snd_kcontrol_new i@p = {...};
@ok1@
identifier r1.i;
position p;
expression e1;
@@
snd_ctl_new1(&i@p,e1)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct snd_kcontrol_new i;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the DP MST audio support on i915 platform and
it will enable dyn_pcm_assign feature.
DP MST supports several device entry on the same port and each
device entry can map to one pcm stream. For example, on i915,
there are 3 pins, and each pin has 3 device entries. This means
there should be 3x3 pcms. However, there is only 3 pipe lines in
i915. This means 3 pcms are actived at most at the same moment.
We will create 5 pcms (pin number + dev entry num - 1) in this case.
For the details, please refer commit a76056f2e5
("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug")
Each device entry is a virtual pin. It is described by pin_nid and dev_id
in struct hdmi_spec_per_pin.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-3-git-send-email-libin.yang@intel.com
This patch fixes some warnings from klockwork.
These warnings are not the real issues. The patch
adds the sanity check.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>