[ Upstream commit 8f5d41f3a0 ]
There are some updates for the Icelake model specific uncore performance
monitors. (The update can be found at 10th generation intel core
processors families specification update Revision 004, ICL068)
1) Counter 0 of ARB uncore unit is not available for software use
2) The global 'enable bit' (bit 29) and 'freeze bit' (bit 31) of
MSR_UNC_PERF_GLOBAL_CTRL cannot be used to control counter behavior.
Needs to use local enable in event select MSR.
Accessing the modified bit/registers will be ignored by HW. Users may
observe inaccurate results with the current code.
The changes of the MSR_UNC_PERF_GLOBAL_CTRL imply that groups cannot be
read atomically anymore. Although the error of the result for a group
becomes a bit bigger, it still far lower than not using a group. The
group support is still kept. Only Remove the *_box() related
implementation.
Since the counter 0 of ARB uncore unit is not available, update the MSR
address for the ARB uncore unit.
There is no change for IMC uncore unit, which only include free-running
counters.
Fixes: 6e394376ee ("perf/x86/intel/uncore: Add Intel Icelake uncore support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200925134905.8839-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e743830451 ]
The IMC uncore support is missed for E3-1585 v5 CPU.
Intel Xeon E3 V5 Family has Sky Lake CPU.
Add the PCI ID of IMC for Intel Xeon E3 V5 Family.
Reported-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Link: https://lkml.kernel.org/r/1578687311-158748-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
The client IMC block is accessed by MMIO. Current code uses an informal
way to access the block, which is not recommended.
Clean up the code by using __iomem annotation and the accessor
functions (read[lq]()).
Move exit_box() and read_counter() to generic code, which can be shared
with the server code later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
AmberLake and WhiskeyLake have same client uncore events as
KabyLake. Thus add the PCI IDs for AmberLake Y processor lines,
for WhiskeyLake U processor lines and for KabyLake, add H
processor line and workstation.
Platform Device ID
================================
AML Y 2 Core 590Ch
KBL H 4 Core 5910h
KBL 4 Core WorkStation 5918h
WHL U 4 Core 3ED0h
WHL U 4 Core 3E34h
WHL U 2 Core 3E35h
AML Y 4 Core 590Dh
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Charles Prestopine <charles.d.prestopine@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190511000311.20733-2-gayatri.kammela@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add Intel Icelake uncore support:
- The init code is based on Skylake
- Add new PCI id for IMC
- New MSR address for CBOX
- Get CBOX# from CNL_UNC_CBO_CONFIG MSR directly
- Create a new PMU for fixed clocktick counter
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-13-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The client IMC bandwidth events currently return very large values:
$ perf stat -e uncore_imc/data_reads/ -e uncore_imc/data_writes/ -I 10000 -a
10.000117222 34,788.76 MiB uncore_imc/data_reads/
10.000117222 8.26 MiB uncore_imc/data_writes/
20.000374584 34,842.89 MiB uncore_imc/data_reads/
20.000374584 10.45 MiB uncore_imc/data_writes/
30.000633299 37,965.29 MiB uncore_imc/data_reads/
30.000633299 323.62 MiB uncore_imc/data_writes/
40.000891548 41,012.88 MiB uncore_imc/data_reads/
40.000891548 6.98 MiB uncore_imc/data_writes/
50.001142480 1,125,899,906,621,494.75 MiB uncore_imc/data_reads/
50.001142480 6.97 MiB uncore_imc/data_writes/
The client IMC events are freerunning counters. They still use the
old event encoding format (0x1 for data_read and 0x2 for data write).
The counter bit width is calculated by common code, which assume that
the standard encoding format is used for the freerunning counters.
Error bit width information is calculated.
The patch intends to convert the old client IMC event encoding to the
standard encoding format.
Current common code uses event->attr.config which directly copy from
user space. We should not implicitly modify it for a converted event.
The event->hw.config is used to replace the event->attr.config in
common code.
For client IMC events, the event->attr.config is used to calculate a
converted event with standard encoding format in the custom
event_init(). The converted event is stored in event->hw.config.
For other events of freerunning counters, they already use the standard
encoding format. The same value as event->attr.config is assigned to
event->hw.config in common event_init().
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org # v4.18+
Fixes: 9aae1780e7 ("perf/x86/intel/uncore: Clean up client IMC uncore")
Link: https://lkml.kernel.org/r/20190227165729.1861-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For drivers that do not support context exclusion let's advertise the
PERF_PMU_CAP_NOEXCLUDE capability. This ensures that perf will
prevent us from handling events where any exclusion flags are set.
Let's also remove the now unnecessary check for exclusion flags.
PMU drivers that support at least one exclude flag won't have the
PERF_PMU_CAP_NOEXCLUDE capability set - these PMU drivers should still
check and fail on unsupported exclude flags. These missing tests are
not added in this patch.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-11-git-send-email-andrew.murray@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Coffee Lake has 8 core products which has 8 Cboxes. The 8th CBOX is
mapped into different MSR space.
Increase the num_boxes to 8 to handle the new products. It will not
impact the previous platforms, SkyLake, KabyLake and earlier CoffeeLake.
Because the num_boxes will be recalculated in uncore_cpu_init and
doesn't exceed the x86_max_cores.
Introduce a new box flag bit to indicate the 8th CBOX.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181019170419.378-2-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake.
Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U,
H, S processor lines.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The counters in client IMC uncore are free running counters, not fixed
counters. It should be corrected. The new infrastructure for free
running counter should be applied.
Introducing a new type SNB_PCI_UNCORE_IMC_DATA for client IMC free
running counters.
Keeping the customized event_init() function to be compatible with old
event encoding.
Clean up other customized event_*() functions.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-8-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two free-running counters for client IMC uncore. The
customized event_init() function hard codes their index to
'UNCORE_PMC_IDX_FIXED' and 'UNCORE_PMC_IDX_FIXED + 1'.
To support the index 'UNCORE_PMC_IDX_FIXED + 1', the generic
uncore_perf_event_update is obscurely hacked.
The code quality issue will bring problems when a new counter index is
introduced into the generic code, for example, a new index for
free-running counter.
Introducing a customized event_read() function for client IMC uncore.
The customized function is copied from previous generic
uncore_pmu_event_read().
The index 'UNCORE_PMC_IDX_FIXED + 1' will be isolated for client IMC
uncore only.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vince Weaver reported the following bug when KASAN is enabled:
[ 205.748005] BUG: KASAN: slab-out-of-bounds in snb_uncore_imc_event_del+0x6c/0xa0 at addr ffff8800caa43768
[ 205.758324] Read of size 8 by task perf_fuzzer/6618
It's caused by accessing box->event_list.
For client IMC, there are no generic counters. It defines its own fixed
free running counters. So event_list and n_events are unused.
They can be removed safely, which fixes the bug.
( There's still the separate question of how uninitialized state snuck into
this data structure - but that's a separate fix. )
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: davej@codemonkey.org.uk
Cc: dvyukov@google.com
Cc: eranian@gmail.com
Link: http://lkml.kernel.org/r/1479235210-29090-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several uncore IMC PCI IDs are missed for Intel SkyLake.
Add the PCI IDs for SkyLake Y, U, H and S platforms.
Rename the ID macros for 0x191f and 0x190c.
The corresponding bug:
https://bugzilla.kernel.org/show_bug.cgi?id=187301
The related datasheets are also attached in the bug entry for permanent reference.
Reported-by: Ben Widawsky <benjamin.widawsky@intel.com>
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1478631281-5061-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are bug reports about miscounting uncore counters on some
client machines like Sandybridge, Broadwell and Skylake. It is
very likely to be observed on idle systems.
This issue is caused by a hardware issue. PERF_GLOBAL_CTL could be
cleared after Package C7, and nothing will be count.
The related errata (HSD 158) could be found in:
www.intel.com/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
This patch tries to work around this issue by re-enabling PERF_GLOBAL_CTL
in ->enable_box(). The workaround does not cover all cases. It helps for new
events after returning from C7. But it cannot prevent C7, it will still
miscount if a counter is already active.
There is no drawback in leaving it enabled, so it does not need
disable_box() here.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1470925874-59943-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds full support for Intel SKL client uncore PMU:
- Add support for SKL client CPU uncore PMU, which is similar to the
BDW client PMU driver. (There are some differences in CBOX numbering
and uncore control MSR.)
- Add new support for SkyLake Mobile uncore PMUs, for both CPU and PCI
uncore functionality.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1467208912-8179-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Store the PMU pointer in event->pmu_private, so we can get rid of the
per CPU data storage.
We keep it after converting to per package data, because a CPU to
package lookup will be 3 loads versus one and these usage sites are
in the perf fast path.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.460851335@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When tearing down the boxes nothing undoes the hardware state which was setup
by box->init_box(). Add a box->exit_box() callback and implement it for the
uncores which have an init_box() callback.
This misses the cleanup in the error exit pathes, but I cannot be bothered to
implement it before cleaning up the rest of the driver, which makes that task
way simpler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.023930023@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang