[ Upstream commit 11362b1bef ]
There is a potential race condition between hypervisor page faults
and flushing a memslot. It is possible for a page fault to read the
memslot before a memslot is updated and then write a PTE to the
partition-scoped page tables after kvmppc_radix_flush_memslot has
completed. (Note that this race has never been explicitly observed.)
To close this race, it is sufficient to increment the MMU sequence
number while the kvm->mmu_lock is held. That will cause
mmu_notifier_retry() to return true, and the page fault will then
return to the guest without inserting a PTE.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 265d6e588d ]
System Reset and Machine Check interrupts that are not recoverable due
to being nested or interrupting when RI=0 currently panic. This is not
necessary, and can often just kill the current context and recover.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200508043408.886394-16-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a36e8ba60b ]
IMC(In-memory Collection Counters) does performance monitoring in
two different modes, i.e accumulation mode(core-imc and thread-imc events),
and trace mode(trace-imc events). A cpu thread can either be in
accumulation-mode or trace-mode at a time and this is done via the LDBAR
register in POWER architecture. The current design does not address the
races between thread-imc and trace-imc events.
Patch implements a global id and lock to avoid the races between
core, trace and thread imc events. With this global id-lock
implementation, the system can either run core, thread or trace imc
events at a time. i.e. to run any core-imc events, thread/trace imc events
should not be enabled/monitored.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313055238.8656-1-anju@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dff3064c7 ]
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
[345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
[345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b78169e3 ]
The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.
This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.
Fixes: eb9d7a62c3 ("powerpc/mm_iommu: Fix potential deadlock")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e0942c030 ]
Many drivers don't check for errors when they get a 0xFFs response from an
MMIO load. As a result after an EEH event occurs a driver can get stuck in
a polling loop unless it some kind of internal timeout logic.
Currently EEH tries to detect and report stuck drivers by dumping a stack
trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an
already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump
would occur every few seconds if the driver was spinning in a loop. This
results in a lot of spurious stack traces in the kernel log.
Fix this by limiting it to printing one stack trace for each PE freeze. If
the driver is truely stuck the kernel's hung task detector is better suited
to reporting the probelm anyway.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016012536.22588-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 437ef802e0 upstream.
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b5 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b5, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e4 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 103a8542cb ]
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.
Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
Call Trace:
[c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
[c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
[c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
[c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
[c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
[c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170
This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.
Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.
We have three different ways of detecting radix.
1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.
We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.
Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 973c096f6a upstream.
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b460b51241 upstream.
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.
This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.
This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.
Fixes: be80e758d0 ("powerpc/perf: Add generic compat mode pmu driver")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17899eaf88 ]
Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().
Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.
But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.
Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b648a5132c ]
The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee6 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
file.c:(.text+0x4d70): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
file.c:(.text+0x4df4): undefined reference to `.dump_emit'
Add a Kconfig dependency to prevent this from happening again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0828137e8f upstream.
__init_FSCR() was added originally in commit 2468dcf641 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.
At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.
Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.
Then commit 2517617e0d ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.
That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.
Then in commit 152d523e63 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.
Finally commit b57bd2de8c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.
The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.
Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.
So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfe7cbd58 upstream.
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90a9b102ed upstream.
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e3546 ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e3546 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89c140bbae upstream.
Booting with a 4GB LMB size causes us to panic:
qemu-system-ppc64: OS terminated: OS panic:
Memory block size not suitable: 0x0
Fix pseries_memory_block_size() to handle 64 bit LMBs.
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c83b277ad upstream.
Recently random.h started including percpu.h (see commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:
In file included from /linux/arch/powerpc/include/asm/paca.h:18,
from /linux/arch/powerpc/include/asm/percpu.h:13,
from /linux/include/linux/random.h:14,
from /linux/lib/uuid.c:14:
/linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
139 | DECLARE_PER_CPU(int, next_tlbcam_idx);
This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
includes asm/mmu.h
Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.
We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.
This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.
It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63dee5df43 upstream.
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5eff89657 ]
Commit 866bfc75f4 ("powerpc: conditionally compile platform-specific
serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which
doesn't exist.
Fix it to use CONFIG_PPC_MPC52xx.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-7-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df4d4ef224 ]
We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them
to use CONFIG_PPC_BOOK3S_601 which is the correct symbol.
Fixes: 12c3f1fd87 ("powerpc/32s: get rid of CPU_FTR_601 feature")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c9450c053 ]
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d79e7a5f26 ]
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should
use PVR value. Now considering we are using CPU_FTRS_POWER8, that
implies we returned true for P9 with older firmware. Keep the same behavior
by checking for P9 PVR value.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f675f950 ]
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd34 ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec2fc2a9e9 ]
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050f ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b506923ee4 upstream.
This reverts commit d2a91cef9b.
This commit moved too much work in kasan_init(). The allocation
of shadow pages has to be moved for the reason explained in that
patch, but the allocation of page tables still need to be done
before switching to the final hash table.
First revert the incorrect commit, following patch redoes it
properly.
Fixes: d2a91cef9b ("powerpc/kasan: Fix shadow pages allocation failure")
Cc: stable@vger.kernel.org
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208181
Link: https://lore.kernel.org/r/3667deb0911affbf999b99f87c31c77d5e870cd2.1593690707.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b710d27bf7 upstream.
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 679b2ec8e0 ]
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed1754f2 ]
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e2c226c3 ]
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab8b65be18 ]
It is unsafe to traverse kvm->arch.spapr_tce_tables and
stt->iommu_tables without the RCU read lock held. Also, add
cond_resched_rcu() in places with the RCU read lock held that could take
a while to finish.
arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by qemu-kvm/4265.
stack backtrace:
CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2
Call Trace:
[c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable)
[c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
[c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
[c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
[c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
[c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
[c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
[c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330
[c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130
[c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0
[c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0
[c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200
[c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0
[c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280
[c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278
====
arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4264:
#0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b19f96a81 ]
Mapping RO data as ROX is not an issue since that data
cannot be modified to introduce an exploit.
PPC64 accepts to have RO data mapped ROX, as a trade off
between kernel size and strictness of protection.
On PPC32, kernel size is even more critical as amount of
memory is usually small.
Depending on the number of available IBATs, the last IBATs
might overflow the end of text. Only warn if it crosses
the end of RO data.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2e929b18c ]
Booting a power9 server with hash MMU could trigger an undefined
behaviour because pud_offset(p4d, 0) will do,
0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)
Fix it by converting pud_index() and friends to static inline
functions.
UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15
shift exponent 34 is too large for 32-bit type 'int'
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
ubsan_epilogue+0x18/0x78
__ubsan_handle_shift_out_of_bounds+0x160/0x21c
walk_pagetables+0x2cc/0x700
walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282
(inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311
ptdump_check_wx+0x8c/0xf0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x194
ret_from_kernel_thread+0x5c/0x74
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 126554465d ]
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine. By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.
Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.
With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deb70f7a35 ]
This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.
It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a5054d8cb ]
The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.
The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).
Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ffa8b7dc1 ]
Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:
smp: Bringing up secondary CPUs ...
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000
REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000
CFAR: c000000000019cc8 IRQMASK: 1
GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164
GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030
GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
NIP [c00000000001a2b4] giveup_all+0xb4/0x110
LR [c00000000001a29c] giveup_all+0x9c/0x110
Call Trace:
[c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable)
[c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480
[c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970
[c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70
[c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0
[c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40
[c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8
[c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0
[c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:
usermsr = tsk->thread.regs->msr;
...
WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.
We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1]
0000000000000000 c000000002666008 gpr[2] gpr[3]
c0000000026d3ed0 0000000000000078 gpr[4] gpr[5]
c000000000011b68 c000000002780080 gpr[6] gpr[7]
0000000000000000 0000000000000000 gpr[8] gpr[9]
c0000000026d3f90 0000800000002200 gpr[10] gpr[11]
c000000002004820 c0000000026d7200 gpr[12] gpr[13]
000000001db60000 c0000000010aabe8 gpr[14] gpr[15]
c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17]
c00000000294d598 0000000000000000 gpr[18] gpr[19]
0000000000000000 0000000000001ff8 gpr[20] gpr[21]
0000000000000000 c00000000206d608 gpr[22] gpr[23]
c00000000278e0cc 0000000000000000 gpr[24] gpr[25]
000000002fff0000 c000000000000000 gpr[26] gpr[27]
0000000002000000 0000000000000028 gpr[28] gpr[29]
000000001db60000 0000000004750000 gpr[30] gpr[31]
0000000002000000 000000001db60000 nip msr
0000000000000000 0000000000000000 orig_r3 ctr
c00000000000c49c 0000000000000000 link xer
0000000000000000 0000000000000000 ccr softe
0000000000000000 0000000000000000 trap dar
0000000000000000 0000000000000000 dsisr result
0000000000000000 0000000000000000 ppr kuap
0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \
.ksp = INIT_SP, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */
LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
add r1,r3,r1
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.
As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5470e0c2 ]
'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ac18eead ]
Commit 2b206ee6b0 ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.
For example:
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Getting these large values in case we do -I.
As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.
This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.
With this patch
In power9 platform
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
-C 0 -I 1000 sleep 100
1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3af4786eb4 ]
For platforms using shared.c (4xx, Book3e, Book3s/32), also handle the
_PAGE_COHERENT flag which corresponds to the M bit of the WIMG flags.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Make it more verbose, use "coherent" rather than "m"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/324c3d860717e8e91fca3bb6c0f8b23e1644a404.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 912c0a7f2b upstream.
At boot the FSCR is initialised via one of two paths. On most systems
it's set to a hard coded value in __init_FSCR().
On newer skiboot systems we use the device tree CPU features binding,
where firmware can tell Linux what bits to set in FSCR (and HFSCR).
In both cases the value that's configured at boot is not propagated
into the init_task.thread.fscr value prior to the initial fork of init
(pid 1), which means the value is not used by any processes other than
swapper (the idle task).
For the __init_FSCR() case this is OK, because the value in
init_task.thread.fscr is initialised to something sensible. However it
does mean that the value set in __init_FSCR() is not used other than
for swapper, which is odd and confusing.
The bigger problem is for the device tree CPU features case it
prevents firmware from setting (or clearing) FSCR bits for use by user
space. This means all existing kernels can not have features
enabled/disabled by firmware if those features require
setting/clearing FSCR bits.
We can handle both cases by saving the FSCR value into
init_task.thread.fscr after we have initialised it at boot. This fixes
the bug for device tree CPU features, and will allow us to simplify
the initialisation for the __init_FSCR() case in a future patch.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 993e3d96fd upstream.
The device tree CPU features binding includes FSCR bit numbers which
Linux is instructed to set by firmware.
Whether that's a good idea or not, in the case of the DSCR the Linux
implementation has a hard requirement that the FSCR_DSCR bit not be
set by default. We use it to track when a process reads/writes to
DSCR, so it must be clear to begin with.
So if firmware tells us to set FSCR_DSCR we must ignore it.
Currently this does not cause a bug in our DSCR handling because the
value of FSCR that the device tree CPU features code establishes is
only used by swapper. All other tasks use the value hard coded in
init_task.thread.fscr.
However we'd like to fix that in a future commit, at which point this
will become necessary.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 888468ce72 upstream.
Mapping of early shadow area is implemented by using a single static
page table having all entries pointing to the same early shadow page.
The shadow area must therefore occupy full PGD entries.
The shadow area has a size of 128MB starting at 0xf8000000.
With 4k pages, a PGD entry is 4MB
With 16k pages, a PGD entry is 64MB
With 64k pages, a PGD entry is 1GB which is too big.
Until we rework the early shadow mapping, disable KASAN when the page
size is too big.
Fixes: 2edb16efc8 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7195fcde7314ccbf7a081b356084a69d421b10d4.1590660977.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Mackerras