1
0
Fork 0
Commit Graph

14 Commits (4fbdc6ab836f54e7559a637d9db44be7535c0889)

Author SHA1 Message Date
Hans de Goede 16b2a7d4cb ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box
The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
the same dts for both models. Unfortunately this does not work for the otg
controller, on the M9 this is routed to a micro-usb connector on the outside,
while as on the A1000G-quad it is connected to an usb to sata bridge
(which is not populated on the M9 pcb).

This commit adds a new dts for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-06-02 23:39:46 +02:00
Maxime Ripard c0c2eb2476 ARM: sunxi: dt: Remove the FSF address
The FSF address triggers a warning on checkpatch, saying that the FSF
license is already present in the Linux source code, and that it has
already changed in the past.

Remove it from our DT, as suggested.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-10 10:22:23 +02:00
Maxime Ripard 59ebbe88a6 ARM: sunxi: DT: Add stdout-path property
Add UART aliases and stdout-path property for all the Allwinner boards so that
we won't have to rely on the bootargs' console= value, while working with
legacy bootloaders.

While we're at it, also remove the mentions of earlyprintk in the bootargs,
that will remove our default bootargs entirely, and allow the kernel to boot on
a system even if DEBUG_LL is configured for another system.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27 08:20:30 +02:00
Maxime Ripard ece44e41fa ARM: sun6i: m9: Convert to DT label based syntax
In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27 08:20:21 +02:00
Maxime Ripard 092a0c3b18 ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodes
The pinctrl nodes require some extra opaque arguments for the pull up and drive
strength values.

Introduce a new header file and convert the device trees to replace these
opaque numbers by defines.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:57 +01:00
Maxime Ripard bca12924f0 ARM: sunxi: DT: convert DTs to use common GPIOs includes
Replace the various raw GPIO flags by their definition in the common
dt-bindings header.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:56 +01:00
Maxime Ripard 7145570159 ARM: sunxi: DT: Convert to device tree includes
Prepare the device trees to use the C preprocessor.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:55 +01:00
Hans de Goede 1be83c4f08 ARM: dts: sun6i: Enable ir receiver on the Mele M9
The Mele M9 has an ir receiver, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21 09:58:52 +01:00
Hans de Goede 2f28e33765 ARM: dts: sun6i: Add ethernet support to M9 board
The Mele M9 has an ethernet board, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-17 17:02:54 +01:00
Hans de Goede 90795c560d ARM: dts: sun6i: Add support for the status led
The Mele M9 / A1000G quad has a blue status led, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-13 17:48:41 +01:00
Hans de Goede 5070ac3ee2 ARM: dts: sun6i: Add EHCI support for the M9 board
The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
usb wifi card, the other to a build-in usb-hub, so neither need their
OHCI companion controller to be enabled since the are always connected at
USB-2 speeds.

The controller which is attached to the wifi also does not need a vbus
regulator.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-13 17:47:06 +01:00
Maxime Ripard 37ab5ab8ff ARM: sun6i: m9: Relicense the device tree under GPLv2/X11
The current GPL only licensing on the DTSI makes it very impractical for other
software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense our
device trees under a GPL/X11 dual-license.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-10-21 19:30:03 +02:00
Hans de Goede e6879d190d ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-11 19:07:10 +02:00
Hans de Goede 0ff1ffd3fe ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These
HTPCs use the same board in a different case, for more details see:
http://linux-sunxi.org/Mele_M9

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04 22:58:28 -05:00