v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.
Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.
Example with an HDaudio card with a bad topology:
[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19
with the disable_route_checks set:
[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes
Fixes: daa480bde6 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The logic to calculate the subset of stream parameters supported by all
DAIs associated with a PCM stream is nontrivial. Export a helper
function so it can be used to set up simple codec2codec DAI links.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200305051143.60691-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC core supports multiple codec DAIs but supports only a CPU DAI.
To support multiple cpu DAIs, add cpu_dai and num_cpu_dai in
snd_soc_dai_link and snd_soc_pcm_runtime structures similar to
support for codec_dai. This is intended as a preparatory patch to
eventually support the unification of the Codec and CPU DAI.
Inline with multiple codec DAI approach, add support to allocate,
init, bind and probe multiple cpu_dai on init if driver specifies
that. Also add support to loop over multiple cpu_dai during
suspend and resume.
This is intended as a preparatory patch to eventually unify the CPU
and Codec DAI into DAI components.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of parentheses to protect the argument is fine for (i)++ but
not for (--i).
Fixes: 83f94a2e29 ("ASoC: soc-core: add snd_soc_close_delayed_work()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200219222130.29933-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to setup rtd->close_delayed_work_func.
It will be set at snd_soc_dai_compress_new() or soc_new_pcm().
But these setups close_delayed_work() which is same name /
same implemantaion, but different local code.
To reduce duplicate code, this patch moves it as
snd_soc_close_delayed_work() and share same code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736cot4v2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is using struct snd_soc_rtdcom_list to
connecting component to rtd by using list_head.
struct snd_soc_rtdcom_list {
struct snd_soc_component *component;
struct list_head list; /* rtd::component_list */
};
struct snd_soc_pcm_runtime {
...
struct list_head component_list; /* list of connected components */
...
};
The CPU/Codec/Platform component which will be connected to rtd (a)
is indicated via dai_link at snd_soc_add_pcm_runtime()
int snd_soc_add_pcm_runtime(...)
{
...
/* Find CPU from registered CPUs */
rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus);
...
(a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component);
...
/* Find CODEC from registered CODECs */
(b) for_each_link_codecs(dai_link, i, codec) {
rtd->codec_dais[i] = snd_soc_find_dai(codec);
...
(a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component);
}
...
/* Find PLATFORM from registered PLATFORMs */
(b) for_each_link_platforms(dai_link, i, platform) {
for_each_component(component) {
...
(a) snd_soc_rtdcom_add(rtd, component);
}
}
}
It shows, it is possible to know how many components will be
connected to rtd by using
dai_link->num_cpus
dai_link->num_codecs
dai_link->num_platforms
If so, we can use component pointer array instead of list_head,
in such case, code can be more simple.
This patch removes struct snd_soc_rtdcom_list that is only
of temporary value, and convert to pointer array.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now all driver is using snd_soc_dai_link_component for codec_conf.
Let's remove legacy style
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rt959ic.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To find codec_conf component, it is using dev_name, of_node.
But, we already has this kind of finding component method by
snd_soc_dai_link_component, and snd_soc_is_matching_component().
We shouldn't have duplicate implementation to do same things.
This patch adds snd_soc_dai_link_component support to find
codec_conf component.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfrh59kj.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now all snd_soc_pcm_lib_ioctl() calls were dropped, and it became
superfluous. Let's kill it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191210145406.21419-24-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c has 2 #ifdef CONFIG_DMI, but we can merge these.
OTOH, soc.h has dmi_longname, but it is needed if CONFIG_DMI was defined.
In other words, It is not needed if CONFIG_DMI was not defined.
This patch tidyup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eexbbhyy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now soc-core and soc-topology is using snd_soc_remove_dai_link().
It removes pcm_runtime (= rtd) and disconnect it from card.
The purpose is removing pcm_runtime, not dai_link.
This patch renames function name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/875zipyq5s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now soc-core and soc-topology is using snd_soc_add_dai_link().
The abstract of this function is "create pcm_runtime from
dai_link information and connect it to card".
Thus, "add dai_link" is wrong/confusable naming.
This patch renames function name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/877e35yq5w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_find_dai_link() is soc-topology specific function.
We don't need to have it at soc-core.
This patch moves it to soc-topology.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/878snlyq61.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_get_pcm_runtime() is finding rtd by checking dai_link
name. But, it is strange and waste of CPU power, because its user want
to get from rtd from dai_link, not from dai_link name.
This patch find rtd via dai_link pointer instead of its name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87a781yq67.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No driver is using snd_soc_get_dai_substream(),
and snd_soc_get_pcm_runtime() is enough for such purpose.
We can revival it if it was needed in the future.
Let's remove unused function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87d0cxyq6k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is using many lists.
Now, used dai_link is listed to card as dai_link_list.
[card]->[dai_link]->[dai_link]->...
BTW, this "dai_link" is used to create "rtd".
And this rtd is listed to card as rtd_list.
[card]->[rtd]->[rtd]->...
Here, each rtd has dai_link. This means, we can track all dai_link via
rtd list. This patch removes card dai_link_list, and uses rtd_list
instead of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87fthtyq6z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are cases where we fail before we reach soc_new_pcm which would
init the workqueue. When we fail we attempt to flush the queue which
generates warnings from the workqueue subsystem when we have not inited
the queue. Solution is to use a proxy function to get around this issue.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191203173007.46504-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This ASCII string can carry additional information about
soundcard components or configuration. Add the possibility
to set this string via the ASoC card.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191119174933.25526-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dobj is used only when SND_SOC_TOPOLOGY was selected.
Let's enable it under SND_SOC_TOPOLOGY.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xq251d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
Because of topology side specific reason,
it is calling snd_soc_dapm_new_dai_widgets(),
but it is not needed _dais() side.
This patch factorizes snd_soc_register_dai() to
topology / _dais() common part, and topology specific part.
And do topology specific part at soc-topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
To prepare it, this patch adds missing parameter legacy_dai_naming
to snd_soc_register_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
This patch adds missing soc_del_dai() and snd_soc_unregister_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9ry251z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below
rtdcom rtdcom rtdcom
component component component
rtd->component_list -> list -> list -> list ...
Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component
for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}
but usually, user want to get pointer from for_each_xxx is component
directly, like below.
for_each_rtd_component(rtd, rtdcom, component) {
...
}
This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can free these in the same time.
Here soc_rtd_free() (A) which frees rtd->dev is called from
soc_remove_link_dais() many times (1).
Then, it is using dev_registered flags to avoid multi kfree() (2).
This is no longer needed if we can merge these functions.
static void soc_remove_link_dais(...)
{
...
(1) for_each_comp_order(order) {
(1) for_each_card_rtds(card, rtd) {
(A) soc_rtd_free(rtd);
...
}
}
}
(A) static void soc_rtd_free(...)
{
(2) if (rtd->dev_registered) {
/* we don't need to call kfree() for rtd->dev */
device_unregister(rtd->dev);
(2) rtd->dev_registered = 0;
}
}
This patch merges soc_rtd_free() into soc_free_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878squf7oi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_initialize_card_lists() is doing card related
INIT_LIST_HEAD(), but, it is already doing at
snd_soc_register_card(). We don't need to do it separately.
This patch merges these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877e781ldq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm_mutex is used to prevent concurrent execution of snd_pcm_ops
callbacks. This works fine most of the cases but it can not handle setups
when the same DAI is used by different rtd, for example:
pcm3168a have two DAIs: one for Playback and one for Capture.
If the codec is connected to a single CPU DAI we need to have two dai_link
to support both playback and capture.
In this case the snd_pcm_ops callbacks can be executed in parallel causing
unexpected races in DAI drivers.
By moving the pcm_mutex up to card level this can be solved
while - hopefully - not breaking other setups.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190813104532.16669-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To find aux_dev, ASoC is using .name, codec_name, codec_of_node.
Here, .name is used to fallback in case of no codec.
But, we already have this kind of component finding method by
snd_soc_dai_link_component and soc_find_component().
We shouldn't have duplicated implementation to do same things.
This patch adds snd_soc_dai_link_component support to finding aux_dev.
Now, no driver is using only .name.
All drivers are using codec_name and/or codec_of_node.
This means no driver is finding component from .name so far.
(Actually almost all drivers are using .name as just "device name",
not for finding component...)
This patch
1) add snd_soc_dai_link_component support for aux_dev. legacy style will
be removed if all drivers are switched to new style.
2) try to find component via snd_soc_dai_link_component.
Then, it doesn't try to find via .name, because no driver is using
it so far.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y3046wcf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
card->deferred_resume_work is used if CONFIG_PM_SLEEP was defined.
but
1) It is defined even though CONFIG_PM_SLEEP was not defined
2) random ifdef code is difficult to read.
This patch tidyup these issues.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e7paho1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has many snd_soc_component_xxx(), but these are randomly
located in many files. Because of it, code is difficult to read.
This patch creates new soc-component.c, and moves existing
snd_soc_component_xxx() into it.
But not yet fully. We need more cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imrp5roa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, there is no need to store the individual debugfs file name, just
remove the whole directory all at once, saving a local variable.
Note, the soc-pcm "state" file has now moved to a subdirectory, as it is
only a good idea to save the dentries for debugfs directories, not
individual files, as the individual file debugfs functions are changing
to not return a dentry.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190731131716.9764-2-gregkh@linuxfoundation.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes ALSA SoC naming is very random.
Current soc_dai_hw_params() should use snd_soc_dai_xxx() style.
And then, 1st parameter should be dai. Otherwise it is confusable.
- soc_dai_hw_params(..., dai);
+ snd_soc_dai_hw_params(dai, ...);
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhl6hn5b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support platforms_num != 1 in dai_link. Initially, the main purpose of
this change was to make the platform optional in the dai_link, instead of
inserting the dummy platform driver.
This particular case had just been solved by Kuninori Morimoto with
commit 1d76898928 ("ASoC: soc-core: allow no Platform on dai_link").
However, this change may still be useful for those who need multiple
platform components on a single dai_link (it solves one of the FIXME
note in soc-core)
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link is used to selecting Component (= CPU/Codec/Platform) and
DAI (= CPU/Codec). And selected CPU/Codec/Platform components are
*listed* on Card.
Many drivers don't need special Platform component, but was
mandatory at legacy style ALSA SoC.
Thus, there is this kind of settings on many drivers.
dai_link->platform_of_node = dai_link->cpu_of_node;
In this case, soc_bind_dai_link() will pick-up "CPU component" as
"Platform component", and try to add it to snd_soc_pcm_runtime.
But it will be ignored, because it is already added when CPU bindings.
Historically, this kind of "CPU component" is used/selected as
"Platform" on many ALSA SoC drivers.
OTOH, Dummy Platform will be selected automatically by ALSA SoC if
driver doesn't have Platform settings.
These indicates that there are 2 type of Platforms exist at current
ALSA SoC if driver doesn't need special Platform.
1) use Dummy Platform as Platform component
2) use CPU component as Platform component
ALSA SoC will call Dummy Platform callback function if it is using
Dummy Platform, but it is completely pointless. Because it is the
sound card which doesn't need special Platform.
Thus, the behavior we request to ALSA SoC is selecting 2) automatically
instead of 1) if sound card doesn't need special Platform.
And, 2) means "do nothing" as above explain.
These were needed at legacy style dai_link, but is no longer needed
at modern style dai_link anymore.
This patch allows "no Platform" settings on dai_link, and will do
nothing for it if there was no platform settings. This is same as 2).
By this patch, all drivers which is selecting "CPU component" as
"Platform" can remove such settings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Macro is using "link", not "dai_link"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All drivers switched to modern style dai_link
(= struct snd_soc_dai_link_component).
Let's remove legacy style dai_link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modern style dai_link requests CPU/Codec/Platform component
pointer array and its size, but it will be very verbose code.
To avoid such scene, this patch adds dai_link connection macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
current ALSA SoC is starting to support modern style dai_linke
(= struct snd_soc_dai_link_component) which is mainly used for
multipul DAI/component connection.
Now Codec has full multi-codec support, Platform is using modern
style but still for single Platform.
Only CPU is not yet supporting modern style yet.
If we could support it for CPU, we can switch to modern style
dai_link on all CPU/Codec/Platform, and remove legacy style
from ALSA SoC.
Multi-CPU will be supported in the future.
This patch is initial support for modern style for CPU
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
fe_compr is used at soc-compress, it can be bit field.
This patch move it from int to bit field.
> grep fe_compr -r sound/soc/*
sound/soc/soc-compress.c: rtd->fe_compr = 1;
sound/soc/soc-pcm.c: if (!fe->dpcm[stream].runtime && !fe->fe_compr)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Recently, for Intel platforms the "ignore_module_refcount" field
was introduced for the component driver. In order to avoid a
deadlock preventing the PCI modules from being removed
even when the card was idle, the refcounts were not incremented
for the device driver module during component probe.
However, this change introduced a nasty side effect:
the device driver module can be unloaded while a pcm stream is open.
This patch proposes to change the field to be renamed as
"module_get_upon_open". When this field is set, the module
refcount should be incremented on pcm open amd decremented
upon pcm close. This will enable modules to be removed
when no PCM playback/capture happens and prevent removal
when the component is actually in use.
Also, align with the skylake component driver with the new name.
Fixes: b450b878('ASoC: core: don't increase component module refcount
unconditionally'
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dpcm get from fe_clients/be_clients
may be free before use
Add a spin lock at snd_soc_card level,
to protect the dpcm instance.
The lock may be used in atomic context, so use spin lock.
Use irq spin lock version,
since the lock may be used in interrupts.
possible race condition between
void dpcm_be_disconnect(
...
list_del(&dpcm->list_be);
list_del(&dpcm->list_fe);
kfree(dpcm);
...
and
for_each_dpcm_fe()
for_each_dpcm_be*()
race condition example
Thread 1:
snd_soc_dapm_mixer_update_power()
-> soc_dpcm_runtime_update()
-> dpcm_be_disconnect()
-> kfree(dpcm);
Thread 2:
dpcm_fe_dai_trigger()
-> dpcm_be_dai_trigger()
-> snd_soc_dpcm_can_be_free_stop()
-> if (dpcm->fe == fe)
Excpetion Scenario:
two FE link to same BE
FE1 -> BE
FE2 ->
Thread 1: switch of mixer between FE2 -> BE
Thread 2: pcm_stop FE1
Exception:
Unable to handle kernel paging request at virtual address dead0000000000e0
pc=<> [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c
sound/soc/soc-pcm.c:3226
if (dpcm->fe == fe)
lr=<> [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c
Backtrace:
[<ffffff89602dba80>] notify_die+0x68/0xb8
[<ffffff896028c7dc>] die+0x118/0x2a8
[<ffffff89602a2f84>] __do_kernel_fault+0x13c/0x14c
[<ffffff89602a27f4>] do_translation_fault+0x64/0xa0
[<ffffff8960280cf8>] do_mem_abort+0x4c/0xd0
[<ffffff8960282ad0>] el1_da+0x24/0x40
[<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c
[<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c
[<ffffff8960e2edec>] dpcm_fe_dai_trigger+0x3c/0x44
[<ffffff8960de5588>] snd_pcm_do_stop+0x50/0x5c
[<ffffff8960dded24>] snd_pcm_action+0xb4/0x13c
[<ffffff8960ddfdb4>] snd_pcm_drop+0xa0/0x128
[<ffffff8960de69bc>] snd_pcm_common_ioctl+0x9d8/0x30f0
[<ffffff8960de1cac>] snd_pcm_ioctl_compat+0x29c/0x2f14
[<ffffff89604c9d60>] compat_SyS_ioctl+0x128/0x244
[<ffffff8960283740>] el0_svc_naked+0x34/0x38
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core has for the longest time increased the module reference
counts, even before the transition to the component model. This is
probably fine on most platforms, but it introduces a deadlock case on
Intel devices with the Skylake and SOF drivers which cannot be removed
due to their reference counts being modified by the core.
In these 2 cases, the PCI or ACPI driver .probe creates a platform
device to let the machine driver .probe register the audio
card. Conversely the PCI or ACPI driver .remove will unregister the
platform device which results in the card being removed by the machine
driver .remove.
With ascii art, this can be represented as
modprobe
snd_soc_skl/
soc-pci-dev/sof-acpci-dev ----------> pci/acpi probe
^ |
| ---------------|
| | |
| V V
increase register register machine
refcount component platform_device
^ |
| |
| V
component <---- register card <---- probe
probe
The issue is that by playing with the component's module reference
counts during the card registration, it's no longer possible to remove
the module which controls the component. This can be shown, e.g. with
the following error:
root@plb-XPS-13-9350:~# lsmod | grep snd_soc_skl
snd_soc_skl 110592 1
root@plb-XPS-13-9350:~# rmmod snd_soc_skl
rmmod: ERROR: Module snd_soc_skl is in use
Increasing the reference count during the component probe is not
useful. If the PCI/ACPI module is removed, the card will be removed
anyway.
To avoid breaking existing platforms and allowing Intel platforms to
safely deal with module load/unload cases, this patch introduces a
flag which needs to be set during the component initialization. This
is a strictly opt-in capability that should only be used when the
handling of the component module does not require a reference count
increase to prevent removal during use.
Note that this solution is not directly applicable to the legacy
Atom/SST driver, which uses a different device hierarchy. There are
however additional refcount issues which prevent the ACPI driver from
being removed. This is a different issue which would need a different
patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To reuse the same machine drivers with Atom/SST, Skylake and SOF, we
need to change the default platform_name (or platforms->name in the
"modern" representation).
So far, this override was done with an automatic override, which was
broken by a set of changes for DT platforms related to deferred probe
handling.
This automatic override is actually not really needed, the machine
driver can already receive the platform name as a platform_data
parameter. This is used e.g. for HDaudio support where we have
different PCI aliases used for different platforms. We can reuse the
same mechanism and modify the machine drivers to override the dailinks
prior to registrating the card.
This will require additional work for SOF, but with this helper it'll
be just two lines of additional code per machine driver which is
reused, not the end of the world.
This helper can be simplified when all drivers have transitioned to
the "modern" representation of dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_dai_link is starting to use snd_soc_dai_link_component
(= modern) style for Platform, but it is still assuming single Platform
so far. We will need to have multi Platform support in the not far
future.
Currently only simple card is using it as sound card driver,
and other drivers are converted to it from legacy style by
snd_soc_init_platform().
To avoid future problem of multi Platform support, let's add
num_platforms before it is too late.
In the same time, to make it same naming mothed, "platform" should
be "platforms". This patch fixup it too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC is assuming 1 CPU 1 Platform (= DMA) style system.
Because of this background, it is directly using
xxx_name / xxx_of_node / xxx_dai_name on dai_link.
Let's call it as legacy style here.
More complex style system like multi CPU multi Platform (= DMA) will
coming. To supporting it, we can use snd_soc_dai_link_component on
dai_link. Let's call it as modern style here.
But current ALSA SoC can't support it so far. Thus, we need to have
multi CPU / multi Codec / multi Platform style in the future on ALSA SoC.
Currently we already have multi Codec support. Platform is starting to
use modern style on dai_link, but still style only. Multi Platform is
not yet implemented. And we still don't have multi CPU support on ALSA
SoC, and not have modern style either.
Currently, if driver is using legacy style Codec/Platform, it will be
converted to modern style on soc-core. This means, we are using glue code
for legacy vs modern style so far on ALSA SoC.
We can fully switch to modern style on all drivers if ALSA SoC supported
modern style for CPU, and then, legacy style code will be removed from
ALSA SoC.
Untile then, we need to keep both legacy/modern style and its glue code.
This patch adds such future plan and background on soc.h
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is
statically allocated and it does this by devm_kzalloc. In the event of
an EPROBE_DEFER the memory will be freed and the pointers are left
dangling. snd_soc_init_platform sees the dangling pointers and assumes
they are pointing to initialized memory and does not reallocate them on
the second probe attempt which results in a use after free bug since
devm has freed the memory from the first probe attempt.
Since the intention for snd_soc_dai_link->platform is that it can be set
statically by the machine driver we need to respect the pointer in the
event we did not set it but still catch dangling pointers. The solution
is to add a flag to track whether the pointer was dynamically allocated
or not.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 3b7103562c ("ASoC: soc-core: add
snd_soc_of_parse_node_prefix()") maked snd_soc_of_parse_audio_prefix()
as #define. But it'd be better to make this a static inline rather than
a #define. It helps with error messages and type safety.
This patch makes it inline.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_of_parse_audio_prefix() to get codec_conf
settings from DT which is used to avoid DAI naming conflict when
CPU/Codec matching.
Currently, it is parsing from "top node",
but, we want to parse from "each sub node" if sound card had multi
cpus/codecs.
This patch adds new snd_soc_of_parse_node_prefix() to allow parsing
settings from selected node.
It is keeping existing snd_soc_of_parse_audio_prefix() by using macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc notices that without either the ac97 bus or the pdata, we never
initialize the regmap pointer, which leads to an uninitialized variable
access:
sound/soc/codecs/wm9712.c: In function 'wm9712_soc_probe':
sound/soc/codecs/wm9712.c:666:2: error: 'regmap' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Since that configuration is invalid, it's better to return an error
here. I tried to avoid adding complexity to the conditions, and turned
the #ifdef into a regular if(IS_ENABLED()) check for readability.
This in turn requires moving some header file declarations out of
an #ifdef.
The same code is used in three drivers, all of which I'm changing
the same way.
Fixes: 2ed1a8e0ce ("ASoC: wm9712: add ac97 new bus support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A kernel oops happens on an error case (usual missing BE mixer
configuration required by Intel SST driver). Git bisect points to this
macro and an operator precedence issue.
for (; ((i--) >= 0) && ((dai) = rtd->codec_dais[i]);)
The initial code replaced by this macro was
while (--i >= 0) {
codec_dai = rtd->codec_dais[i];
Fix the C operator precedence difference by reverting to pre-decrement
Fixes: 0b7990e389 ('ASoC: add for_each_rtd_codec_dai() macro')
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_component_dais() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_comp_order() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_components() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_rtds() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_links() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_prelinks() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 0b7990e389 ("ASoC: add for_each_rtd_codec_dai() macro")
added for_each_rtd_codec_dai_reverse(). but _rollback() is better
naming than _reverse(). This patch rename it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current behaviour of ASoC core w.r.t to component removal is that it
unregisters dependent sound card totally. There is no support to
rebind the card if the component comes back.
Typical use case is DSP restart or kernel modules itself.
With this patch, core now maintains list of cards that are unbind due to
any of its depended components are removed and card not unregistered yet.
This list is cleared when the card is rebind successfully or when the
card is unregistered from machine driver.
This list of unbind cards are tried to bind once again after every new
component is successfully added, giving a fair chance for card bind
to be successful.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is counting card->dai_link_list user,
but no-one is using it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Larger CODECs may contain many several hundred widgets and which set of
parameters is selected only needs to be recorded on a per DAI basis. As
such move the selected CODEC to CODEC link params to be stored in the
runtime rather than the DAPM widget, to save some memory.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC snd_soc_pcm_runtime has snd_soc_dai array for codec_dai.
To be more readable code, this patch adds
new for_each_rtd_codec_dai() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC snd_soc_dai_link has snd_soc_dai_link_component array
for codecs.
To be more readable code, this patch adds
new for_each_link_codecs() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current struct snd_soc_dai_link is supporting multicodec,
and it is supporting legacy style of
codec_name
codec_of_node
code_dai_name
This is handled as single entry of multicodec.
We don't have multicpu support yet, but in the future we will.
In such case, we can use snd_soc_dai_link_component for both
cpu/codec. Then the code will be more simple and readble.
As next step, we want to use it for platform, too.
This patch adds snd_soc_dai_link_component style for platform.
We might have multiplatform support in the future, but we
don't know yet. To avoid un-known issue / complex code,
this patch supports just single-platform as 1st step.
If we could use snd_soc_dai_link_component for all CPU/Codec/Platform,
we will switch to new style, and remove legacy code.
This is prepare for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DRM based audio components get registered inside the component framework
bind callback. However component framework has a big mutex lock taken for
every call to component_add, component_del and bind, unbind callbacks.
This can lead to deadlock situation if we are trying to add new/remove
component within a bind/unbind callbacks. Which is what was happening
with bcm2837 rpi 3.
Revert this change till we sort out the mutex issue.
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Amlogic's axg card driver can't use snd_soc_of_parse_tdm_slot()
directly because it needs to handle 4 mask for each direction.
Yet the parsing of each mask is the same, so export
snd_soc_of_get_slot_mask() to reuse the the existing code.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch aims at achieving dynamic behaviour of audio card when
the dependent components disappear and reappear.
With this patch the card is removed if any of the dependent component
is removed and card is added back if the dependent component comes back.
All this is done using component framework and matching based on
component name.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As done for format and channels, add the possibility to merge
the backend rates on the frontend rates.
This useful if the backend does not support all rates supported by the
frontend, or if several backends (cpu and codecs) with different
capabilities are connected to the same frontend.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine drivers statically define a number of DAI links that currently
cannot be changed or removed by topology. This means PCMs and platform
components cannot be changed by topology at runtime AND machine drivers
are tightly coupled to topology.
This patch allows topology to override the machine driver DAI link config
in order to reuse machine drivers with different topologies and platform
components. The patch supports :-
1) create new FE PCMs with a topology defined PCM ID.
2) destroy existing static FE PCMs
3) change the platform component driver.
4) assign any new HW params fixups.
5) assign a new card name prefix to differentiate this topology to userspace.
The patch requires no changes to the machine drivers, but does add some
platform component flags that the platform component driver can assign
before loading topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DPCM is caring only FE channel configuration. Sometimes
it will be trouble if user selects channel which isn't supported
by BE.
This patch adds new .dpcm_merged_chan on struct snd_soc_dai_link.
DPCM will use FE / BE merged channel if struct snd_soc_dai_link
has it.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All conditionally-defined routines in include/sound/soc.h expose a
static inline fallback to avoid 0-day warnings and compilation issues,
except snd_soc_new_compress().
Fixes: 5db6aab6f3 ('ASoC: topology: Add support for compressed PCMs')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now no one is using Codec related code.
Let's remove all
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit ef050bece1 ("ASoC: Remove platform code now everything is
componentised") removed platform code, but it didn't remove
.pcm_new/free which existed only for platform.
This patch remove these
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To setup regmap, ALSA SoC has snd_soc_component_init_regmap() and
.get_regmap. But these are duplicated feature.
Now, no one is using .get_regmap, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec reg_cache is legacy feature, almost all driver are now using
common regmap, and very few driver had been used this legacy feature.
Because of this background, it is now implemented on each
driver internally now.
So now, no one is using codec reg_cache. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No one is using codec hw_write/control_data any more.
Let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As all drivers have been moved over to the new generic component
code remove the now unused platform specific code.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski reported a NULL dereference in _instantiate_card()
on Odroid XU3 and XU boards which he bisected to 45f8cb57da (ASoC:
core: Allow topology to override machine driver FE DAI link config).
Revert that commit for now, along with f11a5c27f9 (ASoC: core: Add
name prefix for machines with topology rewrites) due to dependency
issues, in order to keep things booting cleanly in -next.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine drivers statically define a number of DAI links that currently
cannot be changed or removed by topology. This means PCMs and platform
components cannot be changed by topology at runtime AND machine drivers
are tightly coupled to topology.
This patch allows topology to override the machine driver DAI link config
in order to reuse machine drivers with different topologies and platform
components. The patch supports :-
1) create new FE PCMs with a topology defined PCM ID.
2) destroy existing static FE PCMs
3) change the platform component driver.
4) assign any new HW params fixups.
The patch requires no changes to the machine drivers, but does add some
platform component flags that the platform component driver can assign
before loading topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for dereferencing device nodes in the 'codecs' array is moved
to a separate function so we can avoid open coding that in drivers.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can replace Codec to Component. Let's do it.
Note:
xxx_codec_xxx() -> xxx_component_xxx()
.idle_bias_off = 0 -> .idle_bias_on = 1
.ignore_pmdown_time = 0 -> .use_pmdown_time = 1
- -> .endianness = 1
- -> .non_legacy_dai_naming = 1
To keep compatibilty, this patch adds snd_soc_xxx_ac97_codec()
macro. These will be removed when all codec code was removed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit fbb16563c6 ("ASoC: snd_soc_component_driver has pmdown_time")
added new .pmdown_time which is for inverted version of current
.ignore_pmdown_time
But it is confusable name. Let's rename it to .use_pmdown_time
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ALSA SoC, Codec only has .read/.write callback.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
"dai_list" and "num_dai" on snd_soc_component are related
parameter. Let's arrange these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has some duplicate parameter.
snd_soc_component::dai_drv is one of them.
Each DAI is keeping its driver as snd_soc_dai::driver,
and component has dai_list.
This means, we can reach to each DAI and its driver by using dai_link.
Thus, there is no need to keep DAI driver pointer on component.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now, we have snd_card_disconnect_sync() on ALSA framework.
snd_soc_disconnect_sync() is ASoC version of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_codec() (= for Codec) will be removed soon.
This patch Component version of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart