Currently, if pd is null then we hit a null pointer derference
on accessing pd->pd_id. Instead of just printing an error message
we should also return -EINVAL immediately.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
and rename class version define to indicate SM rather than SMP or SMI
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enable mlx5 based hardware to report packet pacing capabilities
from kernel to user space. Packet pacing allows to limit the rate to any
number between the maximum and minimum, based on user settings.
The capabilities are exposed to user space through query_device by uhw.
The following capabilities are reported:
1. The maximum and minimum rate limit in kbps supported by packet pacing.
2. Bitmap showing which QP types are supported by packet pacing operation.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.
This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is a pre-step towards having mlx5 IB device also over Eth ports where
RoCE is not supported. We change the roce enable/disable and roce_lag
init/fini function names to have _eth instead of _roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Refactor the netdev notifier registration into a small helper function.
This is a pre-step towards having mlx5 IB device over an Ethernet port
which doesn't support RoCE. Also, renamed the de-registration helper
and the new helper as netdev notifier and not roce, to make it clear
this is not only used with roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.
Change the length type to be u64.
Fixes: 968e78dd96 ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When enabling many VFs, the total amount of DMA mappings increase
significantly. This causes DMA allocations to take a lot of time
since they are serialized in the kernel.
As a result the driver enters into fatal condition due to
timeout and the system hangs. To recover from this we disable
MR cache for VFs.
PFs will still have a full cache and VFs cache can be manipulated
as usual after driver load.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the SRQ type assignment to be before actually using it
in create_srq_user() and in create_srq_kernel() functions.
Fixes: af1ba291c5 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For non-special QPs, the port value becomes non-zero only at the
RESET-to-INIT transition. If the QP has not undergone that transition,
its port number value is still zero.
If such a QP is destroyed before being moved out of the RESET state,
subtracting one from the qp port number results in a negative value.
Using that negative value as an index into the qp1_proxy array
results in an out-of-bounds array reference.
Fix this by testing that the QP type is one that uses qp1_proxy before
using the port number. For special QPs of all types, the port number is
specified at QP creation time.
Fixes: 9433c18891 ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Advertise that create_ah and destroy_ah verbs are accessible from
uverbs interface.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Resolving a MAC address for a given IP address in userspace is inefficient.
This patch lets mlx5 user driver using the kernel driver to resolve the mac
and get the answer in the private section of the response.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To make mlx5 user driver aware of whether kernel driver returns dmac
in user data response add a new flag that will be returned back to
user-space through alloc_ucontext.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to match packet fields which are tunneled,
i.e. support matching the header of the inner packet which is the result of
or bit operation of the original header and the IB_FLOW_SPEC_INNER type.
The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not
needed to be checked, because the IB core has this check already.
Signed-off-by: Moses Reuben <mosesr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to receive specific Vxlan packet in ConnectX-4.
Signed-off-by: Moses Reuben <mosesr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
CQE compressing reduces PCI overhead by coalescing and compressing
multiple CQEs into a single merged CQE. Successful compressing
improves message rate especially for small packet traffic.
CQE compressing is supported for all 64B CQE formats (with certain
limitations) generated by RQ/Responder or by SQ/Requestor.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The capabilities include:
- Max number of compressed and aggregated CQEs in a single session,
while zero means unsupported.
- For Responder, there are two formats of mini CQE: mini CQE with Rx
hash and mini CQE with checksum. They're mutual exclusive.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The capabilities whether hardware support multi packet WQE or not is
exposed to user space through query_device by uhw.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before reading GRH attributes, need to make sure AH contains GRH,
and in addition, initialize GID type.
Fixes: dbf727de74 ('IB/core: Use GID table in AH creation and dmac resolution')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.
If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.
Fixes: c1c9850112 ('IB/mlx4: Add support for steerable IB UD QPs')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some resources are incorrectly organized and at odds with
HW capabilities. Specifically, ILQ, IEQ, QPs, MSS, QOS
and statistics belong in a VSI.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_ieq_handle_partial() the check for !status is incorrect.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently we are changing the MSS regardless of whether
there is a change or not in MTU. Fix to make the
assignment of MSS dependent on an MTU change.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a QP reference when terminate timer is started to ensure
the destroy QP doesn't race ahead to free the QP while it is being
referenced in the terminate timer's handler.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On a device close, the control QP (CQP) is destroyed by calling
cqp_destroy which destroys the CQP and frees its SD buffer memory.
However, if the reset flag is true, cqp_destroy is never called and
leads to a memory leak on SD buffer memory. Fix this by always calling
cqp_destroy, on device close, regardless of reset. The exception to this
when CQP create fails. In this case, the SD buffer memory is already
freed on an error check and there is no need to call cqp_destroy.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When flush QP and there are no pending work requests, signal completion
to unblock i40iw_drain_sq and i40iw_drain_rq which are waiting on
completion for iwqp->sq_drained and iwqp->sq_drained respectively.
Also, signal completion if flush QP fails to prevent the drain SQ or RQ
from being blocked indefintely.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A QP can be double freed if i40iw_cm_disconn() is
called while it is currently being freed by
i40iw_rem_ref(). The fix in i40iw_cm_disconn() will
first check if the QP is already freed before
making another request for the QP to be freed.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hw_stats is a pointer to i40_iw_dev_stats struct in i40iw_get_hw_stats().
Use hw_stats and not &hw_stats in the memcpy to copy the i40iw device stats
data into rdma_hw_stats counters.
Fixes: b40f4757da ("IB/core: Make device counter infrastructure dynamic")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The macros I40IW_STAG_KEY_FROM_STAG and I40IW_STAG_INDEX_FROM_STAG are
apparently bad - they are using the logical "&&" operation which
does not make sense here. It should have been a bitwise "&" instead.
Since the macros seem to be completely unused, let's simply remove
them so that nobody accidentially uses them in the future. And while
we're at it, also remove the unused macro I40IW_CREATE_STAG.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Defining static data structures in a header file is wrong because
this causes the data structure to be instantiated once in every .c
file it is included in. Hence move the definition of a static
array from a header file into the only .c file in which it is used.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Declare the structure mmu_notifier_ops as const as it is only stored in
the ops field of a mmu_notifier structure. The ops field is of type
const struct mmu_notifier_ops *, so mmu_notifier_ops structures having
this property can be declared as const.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct mmu_notifier_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
struct mmu_rb_handler handler;
@@
handler.mn.ops=&i@p
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct mmu_notifier_ops i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct mmu_notifier_ops i;
File size before:
text data bss dec hex filename
3566 72 16 3654 e46
drivers/infiniband/hw/hfi1/mmu_rb.o
File size after:
text data bss dec hex filename
3658 0 16 3674 e5a
drivers/infiniband/hw/hfi1/mmu_rb.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add rvt_div_round_up_mtu() and rvt_div_mtu() routines to
do the computation based on the pmtu and the log_pmtu.
Change divides in qib, hfi1 to use the new inlines.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Convert to use new swqe put routine.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Do not allocate credit return base and DMA memory for
NUMA nodes without CPUs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Convert cq completion returns in both rdmavt drivers
to use the new helper.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the standard driver wrapper for QP reference counters.
This makes the code more maintainable.
Fixes: Commit 4d6f85c3fa ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some parts of the code don't use the standard release
wrapper rvt_put_qp() for decrementing and testing
the refcount to then try to use a resource.
Replace this code with the standard driver wrapper.
Fixes: Commit 4d6f85c3fa ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver should not change the external device request
completed bit when not actually doing an external device
request.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In sc_buffer_alloc(), the sc->alloc_lock is released
before calling sc_release_update(), and it is reacquired
after the function call. This causes CPU lock trading.
Fix it by not dropping the lock before calling
sc_release_update().
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The s_cur_sge field in the qp structure holds a pointer to the
SGE of the currently processed WQE. It assumes the protection
of the RVT_S_BUSY flag to prevent the changing of this field
while the send engine is using it. This scheme works as long
as there is only one instance of the send engine running at a
time.
Scaling of the send engine to multiple cores would break this
assumption as there could be multiple instances of the send engine
running on different CPUs. This opens a window where the QP's
RVT_S_BUSY flag is not set but the send engine is still running.
To prevent accidental changing of the s_cur_sge pointer, the QP's
dependence on it is removed. The SGE pointer is now stored in the
verbs_txreq, which is a per-packet data structure. This ensures
that each individual packet has it's own pointer, which is setup
while the RVT_S_BUSY flag is set.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Low power QSFP AOC cables require a different SerDes
Tx PLL bandwidth setting than the default. The
8051 firmware does not know the details, so the driver
needs to tell the firmware through a special setting.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The struct hfi1_affinity is not used anymore.
We use the struct hfi1_affinity_node and hfi1_affinity_node_list
instead.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The qp->s_cur_size field assumes that the S_BUSY bit protects
the field from modification after the slock is dropped. Scaling the
send engine to multiple cores would break that assumption.
Correct the issue by carrying the payload size in the txreq structure.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously tools like hfi1stats had to access these counters through
debugfs, which often caused permission issue for non-root users. It is
not always acceptable to change the debugfs mounting permission due
to security concerns. When exposed under the IB stats interface, the
counters are universally readable by default.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For the received packets with payload less or equal 8DWS
RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr
if the header is not suppressed. When such packet is detected
on the send side the header suppression mechanism is disabled
by clearing SH bit in the packet header.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Both the 8051 memory and LCB register access require multiple
steps and coordination with the driver. This cannot be safely
done with resource0 alone.
The 8051 memory is exported read-only. LCB is exported read/write.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
qp->r_aflags is already protected by qp->r_lock, therefore,
test_and_clear_bit() doesn't need to be atomic. Profile
shows this function call is costly.
Change the test_and_clear_bit() call to use the non-atomic
variant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When reading multiple dc8051 data memory locations
at once, the read enabled field must be toggled
at every address change. Do that by writing only
the address first, then writing the enable.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the ability to read the new EPROM format.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix to return error code -ENOMEM from the __get_free_page() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 05eb23893c ("cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When CQP times out, send a request to LAN driver for reset.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove check for zero 'pages' of unallocated pbles calculated in
add_pble_pool(); as it can never be true.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fail the connect and return the proper error code if a client
is started with local IP address and there is no corresponding
loopback listener.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IRD is not populated on connect request and application is
getting 0 for the value. Fill in the correct value on
connect request.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the TOS field in IP header with the value passed in
from application. If there is mismatch between the remote
client's TOS and listener, set the listener Tos to the higher
of the two values.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add NULL check for ibqp event handler before calling it to report
QP events, as it might not initialized.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use list_for_each_entry_safe macro for the IPv6 addr list
as IPv6 addresses can be deleted while going through the
list.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Disable listeners and disconnect all connected QPs on
a netdev interface down event. On an interface up event,
the listeners are re-enabled.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On i40iw device close, disconnect all connected QPs by moving
them to error state; and block further QPs, PDs and CQs from
being created. Additionally, make sure all resources have been
freed before deallocating the ibdev as part of the device close.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to allow each independent memory region to
be configured for 2MB page size in addition to 4KB
page size.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to use physically mapped WQ's and MR's if determined
that the OS registered user-memory for the region is physically
contiguous. This feature will eliminate the need for unnecessarily
setting up and using PBL's when not required.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The SQ head is incorrectly incremented when the number
of WQEs required is greater than the number available.
The fix is to use the I40IW_RING_MOV_HEAD_BY_COUNT
macro. This checks for the SQ full condition first and
only if SQ has room for the request, then we move the
head appropriately.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The flush_code variable in i40iw_bld_terminate_hdr() is obsolete and
the check to set qp->sq_flush is unreachable. Currently flush code is
populated in setup_term_hdr() and both SQ and RQ are flushed always
as part of the tear down flow.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove unnecessary check for return code from
device_init_pestat() and change func to void.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To be consistent, use the runtime check instead of
conditional compile.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_post_send, use the actual page size instead of
encoded page size. This is to be consistent with the
rest of the file.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It is not necessary to check cm_node->iwdev in
i40iw_rem_ref_cm_node() as it can never be NULL after
a successful call out of i40iw_make_cm_node().
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove dead code, which isn't executed because we
return error if the data size is greater than 48 bytes.
Inline data size greater than 48 bytes isn't supported
and the maximum WQE size is 64 bytes.
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some resources are consumed internally and not available to the user.
After hw is initialized, figure out how many resources are consumed
and subtract those numbers from the initial max device capability in
i40iw_query_device().
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use memcpy for inline data copy in sends
and writes instead of byte by byte copy.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If i40iw_open() fails for any reason, the LAN handler
is not being removed. Modify i40iw_deinit_device()
to always remove the handler.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When creating QPs, ensure init_attr->cap.max_recv_sge
is clipped to MAX_FRAG_COUNT.
Expose MAX_FRAG_COUNT for max_recv_sge and max_send_sge in
i40iw_query_qp().
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Reviewed-By: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Assign each CEQ vector to a different CPU when possible, then
when creating a CQ, use the vector for the CEQ id. This
allows completion work to be distributed over multiple cores.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Passed in page_size was used as encoded value for writing
the WQE and passed in value was usually 4096. This was
working out since bit 0 was 0 and implies 4KB pages,
but would not work for other page sizes.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the MAX_IRD and MAX_ORD size negotiated to the maximum
supported values.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pre-production silicon incorrectly truncates 4 bytes of the MPA
packet in UDP loopback case. Remove the workaround as it is no
longer necessary.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the parameter to disable message packing and
always enable it.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for QoS on QPs. Upon device initialization,
a map is created from user priority to queue set
handles. On QP creation, use ToS to look up the queue
set handle for use with the QP.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch moves HNS vendor's specific structures to
common UAPI folder which will be visible to all consumers.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch mainly fix the name for IB device in order
to match with libhns.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the resources of cq are freed while executing the user case, hardware
can not been notified in hip06 SoC. Then hardware will hold on when it
writes the cq buffer which has been released.
In order to slove this problem, RoCE driver checks the CQE counter, and
ensure that the outstanding CQE have been written. Then the cq buffer
can be released.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It deleted the redundant memset operation because the memory allocated
by ib_alloc_device has been set zero.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In hns_roce driver, we need not call iboe_get_mtu to reduce
IB headers from effective IBoE MTU because hr_dev->caps.max_mtu
has already been reduced.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the resources of mr are freed while executing the user case, hardware
can not been notified in hip06 SoC. Then hardware will hold on when it
reads the payload by the PA which has been released.
In order to slove this problem, RoCE driver creates 8 reserved loopback
QPs to ensure zero wqe when free mr. When the mac address is reset, in
order to avoid loopback failure, we need to release the reserved loopback
QPs and recreate them.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If send queue is still working when qp is in reset state by modify qp
in destroy qp function, hardware will hold on and don't work in hip06
SoC. In current codes, RoCE driver check hardware pointer of sending and
hardware pointer of processing to ensure that hardware has processed all
the dbs of this qp. But while the environment of wire becomes not good,
The checking time maybe too long.
In order to solve this problem, RoCE driver created a workqueue at probe
function. If there is a timeout when checking the status of qp, driver
initialize work entry and push it into the workqueue, Work function will
finish checking and release the related resources later.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Dongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB core has implemented the calculation of GIDs and the management
of GID tables, and it is now responsible to supply query function
for GIDs. So the calculation of GIDs and the management of GID
tables in the RoCE driver is redundant.
The patch is to implement the add_gid/del_gid to set the GIDs in
the RoCE driver, remove the redundant calculation and management of
GIDs in the notifier call of the net device and the inet, and
update the query_gid.
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When using CM to establish connections, qp number that was freed
just now will be rejected by ib core. To fix these problem, We
change qpn allocation to round-robin mode. We added the round-robin
mode for allocating resources using bitmap. We use round-robin mode
for qp number and non round-robing mode for other resources like
cq number, pd number etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch modified the output query info qp_attr->port_num
to fix bug in hip06.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch modified the macro for the timeout when cmd is
processing as follows:
Before modification:
enum {
HNS_ROCE_CMD_TIME_CLASS_A = 10000,
HNS_ROCE_CMD_TIME_CLASS_B = 10000,
HNS_ROCE_CMD_TIME_CLASS_C = 10000,
};
After modification:
#define HNS_ROCE_CMD_TIMEOUT_MSECS 10000
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In old code, the value of qp state from qpc was assigned for
attr->qp_state. The value may be an error while attr_mask &
IB_QP_STATE is zero.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch modified the condition of notifying hardware loopback.
In hip06, RoCE Engine has several ports, one QP is related
to one port. hardware only support loopback in the same port,
not in the different ports.
So, If QP related to port N, the dmac in the QP context equals
the smac of the local port N or the loop_idc is 1, we should
set loopback bit in QP context to notify hardware.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch mainly adds self loopback support for CM.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Peter Chen <luck.chen@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch modified the logic of allocating memory using APIs in
hns RoCE driver. We used kcalloc instead of kmalloc_array and
bitmap_zero. And When kcalloc failed, call vzalloc to alloc
memory.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Ping Zhang <zhangping5@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch added the code for refreshing CQ CI using TPTR in hip06
SoC.
We will send a doorbell to hardware for refreshing CQ CI when user
succeed to poll a cqe. But it will be failed if the doorbell has
been blocked. So hardware will read a special buffer called TPTR
to get the lastest CI value when the cq is almost full.
This patch support the special CI buffer as follows:
a) Alloc the memory for TPTR in the hns_roce_tptr_init function and
free it in hns_roce_tptr_free function, these two functions will
be called in probe function and in the remove function.
b) Add the code for computing offset(every cq need 2 bytes) and
write the dma addr to every cq context to notice hardware in the
function named hns_roce_v1_write_cqc.
c) Add code for mapping TPTR buffer to user space in function named
hns_roce_mmap. The mapping distinguish TPTR and UAR of user mode
by vm_pgoff(0: UAR, 1: TPTR, others:invaild) in hip06.
d) Alloc the code for refreshing CQ CI using TPTR in the function
named hns_roce_v1_poll_cq.
e) Add some variable definitions to the related structure.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Dongdong Huang(Donald) <hdd.huang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In old code, It only added the interface for querying non-specific
QP. This patch mainly adds an interface for querying QP1.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
On Mon, Nov 21, 2016 at 09:52:53AM -0700, Jason Gunthorpe wrote:
> On Mon, Nov 21, 2016 at 02:14:08PM +0200, Leon Romanovsky wrote:
> > >
> > > In ib_ucm_write function there is a wrong prefix:
> > >
> > > + pr_err_once("ucm_write: process %d (%s) tried to do something hinky\n",
> >
> > I did it intentionally to have the same errors for all flows.
>
> Lets actually use a good message too please?
>
> pr_err_once("ucm_write: process %d (%s) changed security contexts after opening FD, this is not allowed.\n",
>
> Jason
>From 70f95b2d35aea42e5b97e7d27ab2f4e8effcbe67 Mon Sep 17 00:00:00 2001
From: Leon Romanovsky <leonro@mellanox.com>
Date: Mon, 21 Nov 2016 13:30:59 +0200
Subject: [PATCH rdma-next V2] IB/{core, qib}: Remove WARN that is not kernel bug
WARNINGs mean kernel bugs, in this case, they are placed
to mark programming errors and/or malicious attempts.
BUG/WARNs that are not kernel bugs hinder automated testing efforts.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The prints after [k|v][m|z|c]alloc() functions are not needed,
because in case of failure, allocator will print their internal
error prints anyway.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
