Hardware 802.11b-only mode isn't supported by the driver (the device is
configured for 802.11n/g instead). Simplify the code by removing checks
for it.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use wrappers where available. Simplifies code and helps with further
improvements to the channel data structure
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
There's no shared code for handling both rx and tx buffers, and tx
buffers require a lot more metadata than rx buffers.
Using a separate data structure for rx reduces memory usage and improves
cache footprint.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 106
/c/kernel-tests/src/i386/drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 148
This removes an open coded simple_open() function
and replaces file operations references to the function
with simple_open() instead.
Generated by: coccinelle/api/simple_open.cocci
CC: Eugene Krasnikov <k.eugene.e@gmail.com>
CC: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use the appropriate helper functions instead of
directly accessing the rt2x00dev->cap_flags field
to check device capability flags.
This improves readability of the code a bit.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use the appropriate helper functions instead of
directly accessing the rt2x00dev->cap_flags field
to check device capability flags.
This improves readability of the code a bit.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use the appropriate helper functions instead of
directly accessing the rt2x00dev->cap_flags field
to check device capability flags.
This improves readability of the code a bit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Use the appropriate helper functions instead of
directly accessing the rt2x00dev->cap_flags field
to check device capability flags.
This improves readability of the code a bit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The rt2x00 code directly accesses the 'cap_flags'
field of 'struct rt2x00_dev' when checking presence
of a given capability flag. The direct access needs
long expressions which lowers readability of the code.
Add a few helper functions which can be used to test
device capabilities without directly accessing the
cap_flags filed.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Adjust whitespaces to move badly aligned constants
to the right column.
The patch contains no functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch adds support for tracing the packet travel through
the ruleset, in a similar fashion to x_tables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a batch support to nfnetlink. Basically, it adds
two new control messages:
* NFNL_MSG_BATCH_BEGIN, that indicates the beginning of a batch,
the nfgenmsg->res_id indicates the nfnetlink subsystem ID.
* NFNL_MSG_BATCH_END, that results in the invocation of the
ss->commit callback function. If not specified or an error
ocurred in the batch, the ss->abort function is invoked
instead.
The end message represents the commit operation in nftables, the
lack of end message results in an abort. This patch also adds the
.call_batch function that is only called from the batch receival
path.
This patch adds atomic rule updates and dumps based on
bitmask generations. This allows to atomically commit a set of
rule-set updates incrementally without altering the internal
state of existing nf_tables expressions/matches/targets.
The idea consists of using a generation cursor of 1 bit and
a bitmask of 2 bits per rule. Assuming the gencursor is 0,
then the genmask (expressed as a bitmask) can be interpreted
as:
00 active in the present, will be active in the next generation.
01 inactive in the present, will be active in the next generation.
10 active in the present, will be deleted in the next generation.
^
gencursor
Once you invoke the transition to the next generation, the global
gencursor is updated:
00 active in the present, will be active in the next generation.
01 active in the present, needs to zero its future, it becomes 00.
10 inactive in the present, delete now.
^
gencursor
If a dump is in progress and nf_tables enters a new generation,
the dump will stop and return -EBUSY to let userspace know that
it has to retry again. In order to invalidate dumps, a global
genctr counter is increased everytime nf_tables enters a new
generation.
This new operation can be used from the user-space utility
that controls the firewall, eg.
nft -f restore
The rule updates contained in `file' will be applied atomically.
cat file
-----
add filter INPUT ip saddr 1.1.1.1 counter accept #1
del filter INPUT ip daddr 2.2.2.2 counter drop #2
-EOF-
Note that the rule 1 will be inactive until the transition to the
next generation, the rule 2 will be evicted in the next generation.
There is a penalty during the rule update due to the branch
misprediction in the packet matching framework. But that should be
quickly resolved once the iteration over the commit list that
contain rules that require updates is finished.
Event notification happens once the rule-set update has been
committed. So we skip notifications is case the rule-set update
is aborted, which can happen in case that the rule-set is tested
to apply correctly.
This patch squashed the following patches from Pablo:
* nf_tables: atomic rule updates and dumps
* nf_tables: get rid of per rule list_head for commits
* nf_tables: use per netns commit list
* nfnetlink: add batch support and use it from nf_tables
* nf_tables: all rule updates are transactional
* nf_tables: attach replacement rule after stale one
* nf_tables: do not allow deletion/replacement of stale rules
* nf_tables: remove unused NFTA_RULE_FLAGS
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a new rule attribute NFTA_RULE_POSITION which is
used to store the position of a rule relatively to the others.
By providing the create command and specifying the position, the
rule is inserted after the rule with the handle equal to the
provided position.
Regarding notification, the position attribute specifies the
handle of the previous rule to make sure we don't point to any
stale rule in notifications coming from the commit path.
This patch includes the following fix from Pablo:
* nf_tables: fix rule deletion event reporting
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register family per netnamespace to ensure that sets are
only visible in its approapriate namespace.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch generalizes the NAT expression to support both IPv4 and IPv6
using the existing IPv4/IPv6 NAT infrastructure. This also adds the
NAT chain type for IPv6.
This patch collapses the following patches that were posted to the
netfilter-devel mailing list, from Tomasz:
* nf_tables: Change NFTA_NAT_ attributes to better semantic significance
* nf_tables: Split IPv4 NAT into NAT expression and IPv4 NAT chain
* nf_tables: Add support for IPv6 NAT expression
* nf_tables: Add support for IPv6 NAT chain
* nf_tables: Fix up build issue on IPv6 NAT support
And, from Pablo Neira Ayuso:
* fix missing dependencies in nft_chain_nat
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows you to temporarily disable an entire table.
You can change the state of a dormant table via NFT_MSG_NEWTABLE
messages. Using this operation you can wake up a table, so their
chains are registered.
This provides atomicity at chain level. Thus, the rule-set of one
chain is applied at once, avoiding any possible intermediate state
in every chain. Still, the chains that belongs to a table are
registered consecutively. This also allows you to have inactive
tables in the kernel.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We cannot use skb->transport_header since it's unset, use
pkt->xt.thoff instead.
Now possible using information made available through the x_tables
compatibility layer.
Reported-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds the x_tables compatibility layer. This allows you
to use existing x_tables matches and targets from nf_tables.
This compatibility later allows us to use existing matches/targets
for features that are still missing in nf_tables. We can progressively
replace them with native nf_tables extensions. It also provides the
userspace compatibility software that allows you to express the
rule-set using the iptables syntax but using the nf_tables kernel
components.
In order to get this compatibility layer working, I've done the
following things:
* add NFNL_SUBSYS_NFT_COMPAT: this new nfnetlink subsystem is used
to query the x_tables match/target revision, so we don't need to
use the native x_table getsockopt interface.
* emulate xt structures: this required extending the struct nft_pktinfo
to include the fragment offset, which is already obtained from
ip[6]_tables and that is used by some matches/targets.
* add support for default policy to base chains, required to emulate
x_tables.
* add NFTA_CHAIN_USE attribute to obtain the number of references to
chains, required by x_tables emulation.
* add chain packet/byte counters using per-cpu.
* support 32-64 bits compat.
For historical reasons, this patch includes the following patches
that were posted in the netfilter-devel mailing list.
From Pablo Neira Ayuso:
* nf_tables: add default policy to base chains
* netfilter: nf_tables: add NFTA_CHAIN_USE attribute
* nf_tables: nft_compat: private data of target and matches in contiguous area
* nf_tables: validate hooks for compat match/target
* nf_tables: nft_compat: release cached matches/targets
* nf_tables: x_tables support as a compile time option
* nf_tables: fix alias for xtables over nftables module
* nf_tables: add packet and byte counters per chain
* nf_tables: fix per-chain counter stats if no counters are passed
* nf_tables: don't bump chain stats
* nf_tables: add protocol and flags for xtables over nf_tables
* nf_tables: add ip[6]t_entry emulation
* nf_tables: move specific layer 3 compat code to nf_tables_ipv[4|6]
* nf_tables: support 32bits-64bits x_tables compat
* nf_tables: fix compilation if CONFIG_COMPAT is disabled
From Patrick McHardy:
* nf_tables: move policy to struct nft_base_chain
* nf_tables: send notifications for base chain policy changes
From Alexander Primak:
* nf_tables: remove the duplicate NF_INET_LOCAL_OUT
From Nicolas Dichtel:
* nf_tables: fix compilation when nf-netlink is a module
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch converts built-in tables/chains to chain types that
allows you to deploy customized table and chain configurations from
userspace.
After this patch, you have to specify the chain type when
creating a new chain:
add chain ip filter output { type filter hook input priority 0; }
^^^^ ------
The existing chain types after this patch are: filter, route and
nat. Note that tables are just containers of chains with no specific
semantics, which is a significant change with regards to iptables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add an optimized payload expression implementation for small (up to 4 bytes)
aligned data loads from the linear packet area.
This patch also includes original Patrick McHardy's entitled (nf_tables:
inline nft_payload_fast_eval() into main evaluation loop).
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add an optimized version of nft_data_cmp() that only handles values of to
4 bytes length.
This patch includes original Patrick McHardy's patch entitled (nf_tables:
inline nft_cmp_fast_eval() into main evaluation loop).
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Split the expression ops into two parts and support overloading of
the runtime expression ops based on the requested function through
a ->select_ops() callback.
This can be used to provide optimized implementations, for instance
for loading small aligned amounts of data from the packet or inlining
frequently used operations into the main evaluation loop.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds the new netlink API for maintaining nf_tables sets
independently of the ruleset. The API supports the following operations:
- creation of sets
- deletion of sets
- querying of specific sets
- dumping of all sets
- addition of set elements
- removal of set elements
- dumping of all set elements
Sets are identified by name, each table defines an individual namespace.
The name of a set may be allocated automatically, this is mostly useful
in combination with the NFT_SET_ANONYMOUS flag, which destroys a set
automatically once the last reference has been released.
Sets can be marked constant, meaning they're not allowed to change while
linked to a rule. This allows to perform lockless operation for set
types that would otherwise require locking.
Additionally, if the implementation supports it, sets can (as before) be
used as maps, associating a data value with each key (or range), by
specifying the NFT_SET_MAP flag and can be used for interval queries by
specifying the NFT_SET_INTERVAL flag.
Set elements are added and removed incrementally. All element operations
support batching, reducing netlink message and set lookup overhead.
The old "set" and "hash" expressions are replaced by a generic "lookup"
expression, which binds to the specified set. Userspace is not aware
of the actual set implementation used by the kernel anymore, all
configuration options are generic.
Currently the implementation selection logic is largely missing and the
kernel will simply use the first registered implementation supporting the
requested operation. Eventually, the plan is to have userspace supply a
description of the data characteristics and select the implementation
based on expected performance and memory use.
This patch includes the new 'lookup' expression to look up for element
matching in the set.
This patch includes kernel-doc descriptions for this set API and it
also includes the following fixes.
From Patrick McHardy:
* netfilter: nf_tables: fix set element data type in dumps
* netfilter: nf_tables: fix indentation of struct nft_set_elem comments
* netfilter: nf_tables: fix oops in nft_validate_data_load()
* netfilter: nf_tables: fix oops while listing sets of built-in tables
* netfilter: nf_tables: destroy anonymous sets immediately if binding fails
* netfilter: nf_tables: propagate context to set iter callback
* netfilter: nf_tables: add loop detection
From Pablo Neira Ayuso:
* netfilter: nf_tables: allow to dump all existing sets
* netfilter: nf_tables: fix wrong type for flags variable in newelem
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds nftables which is the intended successor of iptables.
This packet filtering framework reuses the existing netfilter hooks,
the connection tracking system, the NAT subsystem, the transparent
proxying engine, the logging infrastructure and the userspace packet
queueing facilities.
In a nutshell, nftables provides a pseudo-state machine with 4 general
purpose registers of 128 bits and 1 specific purpose register to store
verdicts. This pseudo-machine comes with an extensible instruction set,
a.k.a. "expressions" in the nftables jargon. The expressions included
in this patch provide the basic functionality, they are:
* bitwise: to perform bitwise operations.
* byteorder: to change from host/network endianess.
* cmp: to compare data with the content of the registers.
* counter: to enable counters on rules.
* ct: to store conntrack keys into register.
* exthdr: to match IPv6 extension headers.
* immediate: to load data into registers.
* limit: to limit matching based on packet rate.
* log: to log packets.
* meta: to match metainformation that usually comes with the skbuff.
* nat: to perform Network Address Translation.
* payload: to fetch data from the packet payload and store it into
registers.
* reject (IPv4 only): to explicitly close connection, eg. TCP RST.
Using this instruction-set, the userspace utility 'nft' can transform
the rules expressed in human-readable text representation (using a
new syntax, inspired by tcpdump) to nftables bytecode.
nftables also inherits the table, chain and rule objects from
iptables, but in a more configurable way, and it also includes the
original datatype-agnostic set infrastructure with mapping support.
This set infrastructure is enhanced in the follow up patch (netfilter:
nf_tables: add netlink set API).
This patch includes the following components:
* the netlink API: net/netfilter/nf_tables_api.c and
include/uapi/netfilter/nf_tables.h
* the packet filter core: net/netfilter/nf_tables_core.c
* the expressions (described above): net/netfilter/nft_*.c
* the filter tables: arp, IPv4, IPv6 and bridge:
net/ipv4/netfilter/nf_tables_ipv4.c
net/ipv6/netfilter/nf_tables_ipv6.c
net/ipv4/netfilter/nf_tables_arp.c
net/bridge/netfilter/nf_tables_bridge.c
* the NAT table (IPv4 only):
net/ipv4/netfilter/nf_table_nat_ipv4.c
* the route table (similar to mangle):
net/ipv4/netfilter/nf_table_route_ipv4.c
net/ipv6/netfilter/nf_table_route_ipv6.c
* internal definitions under:
include/net/netfilter/nf_tables.h
include/net/netfilter/nf_tables_core.h
* It also includes an skeleton expression:
net/netfilter/nft_expr_template.c
and the preliminary implementation of the meta target
net/netfilter/nft_meta_target.c
It also includes a change in struct nf_hook_ops to add a new
pointer to store private data to the hook, that is used to store
the rule list per chain.
This patch is based on the patch from Patrick McHardy, plus merged
accumulated cleanups, fixes and small enhancements to the nftables
code that has been done since 2009, which are:
From Patrick McHardy:
* nf_tables: adjust netlink handler function signatures
* nf_tables: only retry table lookup after successful table module load
* nf_tables: fix event notification echo and avoid unnecessary messages
* nft_ct: add l3proto support
* nf_tables: pass expression context to nft_validate_data_load()
* nf_tables: remove redundant definition
* nft_ct: fix maxattr initialization
* nf_tables: fix invalid event type in nf_tables_getrule()
* nf_tables: simplify nft_data_init() usage
* nf_tables: build in more core modules
* nf_tables: fix double lookup expression unregistation
* nf_tables: move expression initialization to nf_tables_core.c
* nf_tables: build in payload module
* nf_tables: use NFPROTO constants
* nf_tables: rename pid variables to portid
* nf_tables: save 48 bits per rule
* nf_tables: introduce chain rename
* nf_tables: check for duplicate names on chain rename
* nf_tables: remove ability to specify handles for new rules
* nf_tables: return error for rule change request
* nf_tables: return error for NLM_F_REPLACE without rule handle
* nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification
* nf_tables: fix NLM_F_MULTI usage in netlink notifications
* nf_tables: include NLM_F_APPEND in rule dumps
From Pablo Neira Ayuso:
* nf_tables: fix stack overflow in nf_tables_newrule
* nf_tables: nft_ct: fix compilation warning
* nf_tables: nft_ct: fix crash with invalid packets
* nft_log: group and qthreshold are 2^16
* nf_tables: nft_meta: fix socket uid,gid handling
* nft_counter: allow to restore counters
* nf_tables: fix module autoload
* nf_tables: allow to remove all rules placed in one chain
* nf_tables: use 64-bits rule handle instead of 16-bits
* nf_tables: fix chain after rule deletion
* nf_tables: improve deletion performance
* nf_tables: add missing code in route chain type
* nf_tables: rise maximum number of expressions from 12 to 128
* nf_tables: don't delete table if in use
* nf_tables: fix basechain release
From Tomasz Bursztyka:
* nf_tables: Add support for changing users chain's name
* nf_tables: Change chain's name to be fixed sized
* nf_tables: Add support for replacing a rule by another one
* nf_tables: Update uapi nftables netlink header documentation
From Florian Westphal:
* nft_log: group is u16, snaplen u32
From Phil Oester:
* nf_tables: operational limit match
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to nat_decode_session, alloc_null_binding is needed for both
ip_tables and nf_tables, so move it to nf_nat_core.c. This change
is required by nf_tables.
This is an adapted version of the original patch from Patrick McHardy.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pass the hook ops to the hookfn to allow for generic hook
functions. This change is required by nf_tables.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We do not actually need to set any rx filters for the virtual batman
soft interface. However a dummy handler enables a user to set static
multicast listeners for instance.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
This is a simple batadv_tt_save_orig_buffer() refactoring
aiming to make it more generic and avoid useless casts.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Implement batadv_tt_entries() to get the number of entries
fitting in a given amount of bytes. This computation is done
several times in the code and therefore it is useful to have
an helper function.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
This is not used anymore with the new fragmentation, and it might
actually mess up the bonding code because find_router() assumes it
is only called once per packet.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
The module prints a warning when the MTU on the hard interface is too
small to transfer payload traffic without fragmentation. The required
MTU is calculated based on the encapsulation header size. If network
coding is compild into the module its header size is taken into
account as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
the icmp and the icmp_rr packets share the same initial
fields since they use the same code to be processed and
forwarded.
Extract the common fields and put them into a separate
struct so that future ICMP packets can be easily added
without bloating the packet definition.
However, keep the seqno field outside of the newly created
common header because future ICMP types may require a
bigger sequence number space.
This change breaks compatibility due to fields reordering
in the ICMP headers.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
When comparing a network ordered value with a constant, it
is better to convert the constant at compile time by means
of htons() instead of converting the value at runtime using
ntohs().
This refactoring may slightly improve the code performance.
Moreover substitute __constant_htons() with htons() since
the latter increase readability and it is smart enough to be
as efficient as the former
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Non-broadcast packets larger than MTU are fragmented and sent with
an encapsulating header. Up to 16 fragments are supported, which are
sent in reverse order on the wire to allow minimal memory copying when
creating fragments.
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Fragments arriving at their destination are buffered for later merge.
Merged packets are passed to the main receive function as had they never
been fragmented.
Fragments are forwarded without merging if the MTU of the outgoing
interface is smaller than the size of the merged packet.
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Remove the existing fragmentation code before adding the new version
and delete unicast.{h,c}.
batadv_unicast_send_skb() is moved to send.c and renamed to
batadv_send_skb_unicast().
fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in
the new fragmentation code.
BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the
new fragmentation code.
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
In case of a VLAN tagged frame the ethhdr pointer is
moved forward by 4 bytes so that the offset of h_proto
in struct ethhdr matches the real
h_vlan_encapsulated_proto address in the skb. While this
trickery is correct it makes the code harder to understand
and may lead to bugs in case of re-use of ethhdr for other
purposes.
This patch introduces a proto variable to make things
cleaner and easier to understand.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batadv_tt_global_entry_free_ref uses call_rcu to schedule a
function which will only free the global entry itself.
For this reason call_rcu is useless and kfree_rcu can be
used to simplify the code.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batadv_tt_global_add_orig is neither used nor implemented
anymore, therefore it is possible to remove its declaration
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batadv_tt_global_add is not used anymore outside of the TT
code thanks to the TVLV implementation. It can therefore be
declared as static
Last user has been removed by 3de4e64df0f1326db7cc0ef25f5af8522850252d
("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Moreover make it return bool since its result can be either 0 or 1.
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Adding host information for record route is only required for ICMP
requests and replys, and should not be added to just any (future?)
packet type.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
1) We need to take a timestamp only for skb that should be cloned.
Other skbs are not in write queue and no rtt estimation is done on them.
2) the unlikely() hint is wrong for receivers (they send pure ACK)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: MF Nowlan <fitz@cs.yale.edu>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-By: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- update emails for A. Quartulli and M. Lindner in MAINTAINERS
- switch to the next on-the-wire protocol version
- introduce the T(ype) V(ersion) L(ength) V(alue) framework
- adjust the existing components to make them use the new TVLV code
- make the TT component use CRC32 instead of CRC16
- totally remove the VIS functionality (has been moved to userspace)
- reorder packet types and flags
- add static checks on packet format
- remove __packed from batadv_ogm_packet
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=YQD5
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- update emails for A. Quartulli and M. Lindner in MAINTAINERS
- switch to the next on-the-wire protocol version
- introduce the T(ype) V(ersion) L(ength) V(alue) framework
- adjust the existing components to make them use the new TVLV code
- make the TT component use CRC32 instead of CRC16
- totally remove the VIS functionality (has been moved to userspace)
- reorder packet types and flags
- add static checks on packet format
- remove __packed from batadv_ogm_packet
Jeff Kirsher says:
====================
This series contains updates to i40e only.
Alex provides the majority of the patches against i40e, where he does
cleanup of the Tx and RX queues and to align the code with the known
good Tx/Rx queue code in the ixgbe driver.
Anjali provides an i40e patch to update link events to not print to
the log until the device is administratively up.
Catherine provides a patch to update the driver version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 634fb979e8 ("inet: includes a sock_common in request_sock")
I forgot that the two ports in sock_common do not have same byte order :
skc_dport is __be16 (network order), but skc_num is __u16 (host order)
So sparse complains because ir_loc_port (mapped into skc_num) is
considered as __u16 while it should be __be16
Let rename ir_loc_port to ireq->ir_num (analogy with inet->inet_num),
and perform appropriate htons/ntohs conversions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022
reference driver uses different RSSI threshold
and VGC adjustment values for the RT3572 and
RT3593 chipsets.
Update the rt2800_link_tuner function to use the
same values. Also change the comment in the function
to make it more generic.
References:
RT35xx_ChipAGCAdjust function in chips/rt35xx.c
RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h
RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h
RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
In commit 3d81535ea5
(rt2800: 5592: add chip specific vgc calculations)
the rt2800_link_tuner function has been modified to
adjust VGC level for the RT5592 chipset.
On the RT5592 chipset, the VGC level must be adjusted
only if rssi is greater than -65. However the current
code adjusts the VGC value by 0x10 regardless of the
actual chipset if the rssi value is between -80 and
-65.
Fix the broken behaviour by reordering the if-else
statements.
Cc: stable@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Remove the local MOVING_AVERAGE implementation, and use
the generic EWMA functions instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
