The SPTE_MMIO_MASK overlaps with the bits used to track MMIO
generation number. A high enough generation number would overwrite the
SPTE_SPECIAL_MASK region and cause the MMIO SPTE to be misinterpreted.
Likewise, setting bits 52 and 53 would also cause an incorrect generation
number to be read from the PTE, though this was partially mitigated by the
(useless if it weren't for the bug) removal of SPTE_SPECIAL_MASK from
the spte in get_mmio_spte_generation. Drop that removal, and replace
it with a compile-time assertion.
Fixes: 6eeb4ef049 ("KVM: x86: assign two bits to track SPTE kinds")
Reported-by: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the bogus 64-bit only condition from the check that disables MMIO
spte optimization when the system supports the max PA, i.e. doesn't have
any reserved PA bits. 32-bit KVM always uses PAE paging for the shadow
MMU, and per Intel's SDM:
PAE paging translates 32-bit linear addresses to 52-bit physical
addresses.
The kernel's restrictions on max physical addresses are limits on how
much memory the kernel can reasonably use, not what physical addresses
are supported by hardware.
Fixes: ce88decffd ("KVM: MMU: mmio page fault support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize
the checks as much as possible. Move the check to a separate helper,
__is_bad_mt_xwr(), which allows the guest_rsvd_check usage in
paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is
always zero for non-nEPT) while retaining the bitwise-OR of the current
code for the shadow_zero_check in walk_shadow_page_get_mmio_spte().
Add a comment for the bitwise-OR usage in the mmio spte walk to avoid
future attempts to "fix" the code, which is what prompted this
optimization in the first place[*].
Opportunistically remove the superfluous '!= 0' and parantheses, and
use BIT_ULL() instead of open coding its equivalent.
The net effect is that code generation is largely unchanged for
walk_shadow_page_get_mmio_spte(), marginally better for
ept_prefetch_invalid_gpte(), and significantly improved for
paging32/64_prefetch_invalid_gpte().
Note, walk_shadow_page_get_mmio_spte() can't use a templated version of
the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that
KVM hasn't borked its EPT tables. Even if it could be templated, the
benefits of having a single implementation far outweight the few uops
that would be saved for NPT or non-TDP paging, e.g. most compilers
inline it all the way to up kvm_mmu_page_fault().
[*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com
Cc: Jim Mattson <jmattson@google.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if root_hpa is invalid when handling a page fault. The check on
root_hpa exists for historical reasons that no longer apply to the
current KVM code base.
Remove an equivalent debug-only warning in direct_page_fault(), whose
existence more or less confirms that root_hpa should always be valid
when handling a page fault.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN on the existing invalid root_hpa checks in __direct_map() and
FNAME(fetch). The "legitimate" path that invalidated root_hpa in the
middle of a page fault is long since gone, i.e. it should no longer be
impossible to invalidate in the middle of a page fault[*].
The root_hpa checks were added by two related commits
989c6b34f6 ("KVM: MMU: handle invalid root_hpa at __direct_map")
37f6a4e237 ("KVM: x86: handle invalid root_hpa everywhere")
to fix a bug where nested_vmx_vmexit() could be called *in the middle*
of a page fault. At the time, vmx_interrupt_allowed(), which was and
still is used by kvm_can_do_async_pf() via ->interrupt_allowed(),
directly invoked nested_vmx_vmexit() to switch from L2 to L1 to emulate
a VM-Exit on a pending interrupt. Emulating the nested VM-Exit resulted
in root_hpa being invalidated by kvm_mmu_reset_context() without
explicitly terminating the page fault.
Now that root_hpa is checked for validity by kvm_mmu_page_fault(), WARN
on an invalid root_hpa to detect any flows that reset the MMU while
handling a page fault. The broken vmx_interrupt_allowed() behavior has
long since been fixed and resetting the MMU during a page fault should
not be considered legal behavior.
[*] It's actually technically possible in FNAME(page_fault)() because it
calls inject_page_fault() when the guest translation is invalid, but
in that case the page fault handling is immediately terminated.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a check on root_hpa at the beginning of the page fault handler to
consolidate several checks on root_hpa that are scattered throughout the
page fault code. This is a preparatory step towards eventually removing
such checks altogether, or at the very least WARNing if an invalid root
is encountered. Remove only the checks that can be easily audited to
confirm that root_hpa cannot be invalidated between their current
location and the new check in kvm_mmu_page_fault(), and aren't currently
protected by mmu_lock, i.e. keep the checks in __direct_map() and
FNAME(fetch) for the time being.
The root_hpa checks that are consolidate were all added by commit
37f6a4e237 ("KVM: x86: handle invalid root_hpa everywhere")
which was a follow up to a bug fix for __direct_map(), commit
989c6b34f6 ("KVM: MMU: handle invalid root_hpa at __direct_map")
At the time, nested VMX had, in hindsight, crazy handling of nested
interrupts and would trigger a nested VM-Exit in ->interrupt_allowed(),
and thus unexpectedly reset the MMU in flows such as can_do_async_pf().
Now that the wonky nested VM-Exit behavior is gone, the root_hpa checks
are bogus and confusing, e.g. it's not at all obvious what they actually
protect against, and at first glance they appear to be broken since many
of them run without holding mmu_lock.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the calls to thp_adjust() down a level from the page fault handlers
to the map/fetch helpers and remove the page count shuffling done in
thp_adjust().
Despite holding a reference to the underlying page while processing a
page fault, the page fault flows don't actually rely on holding a
reference to the page when thp_adjust() is called. At that point, the
fault handlers hold mmu_lock, which prevents mmu_notifier from completing
any invalidations, and have verified no invalidations from mmu_notifier
have occurred since the page reference was acquired (which is done prior
to taking mmu_lock).
The kvm_release_pfn_clean()/kvm_get_pfn() dance in thp_adjust() is a
quirk that is necessitated because thp_adjust() modifies the pfn that is
consumed by its caller. Because the page fault handlers call
kvm_release_pfn_clean() on said pfn, thp_adjust() needs to transfer the
reference to the correct pfn purely for correctness when the pfn is
released.
Calling thp_adjust() from __direct_map() and FNAME(fetch) means the pfn
adjustment doesn't change the pfn as seen by the page fault handlers,
i.e. the pfn released by the page fault handlers is the same pfn that
was returned by gfn_to_pfn().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move thp_adjust() above __direct_map() in preparation of calling
thp_adjust() from __direct_map() and FNAME(fetch).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the direct MMU page fault handlers into a common helper,
direct_page_fault(). Except for unique max level conditions, the tdp
and nonpaging fault handlers are functionally identical.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename __direct_map()'s param that controls whether or not a disallowed
NX large page should be accounted to match what it actually does. The
nonpaging_page_fault() case unconditionally passes %false for the param
even though it locally sets lpage_disallowed.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Persist the max page level calculated via gfn_lpage_is_disallowed() to
the max level "returned" by mapping_level() so that its naturally taken
into account by the max level check that conditions calling
transparent_hugepage_adjust().
Drop the gfn_lpage_is_disallowed() check in thp_adjust() as it's now
handled by mapping_level() and its callers.
Add a comment to document the behavior of host_mapping_level() and its
interaction with max level and transparent huge pages.
Note, transferring the gfn_lpage_is_disallowed() from thp_adjust() to
mapping_level() superficially affects how changes to a memslot's
disallow_lpage count will be handled due to thp_adjust() being run while
holding mmu_lock.
In the more common case where a different vCPU increments the count via
account_shadowed(), gfn_lpage_is_disallowed() is rechecked by set_spte()
to ensure a writable large page isn't created.
In the less common case where the count is decremented to zero due to
all shadow pages in the memslot being zapped, THP behavior now matches
hugetlbfs behavior in the sense that a small page will be created when a
large page could be used if the count reaches zero in the miniscule
window between mapping_level() and acquiring mmu_lock.
Lastly, the new THP behavior also follows hugetlbfs behavior in the
absurdly unlikely scenario of a memslot being moved such that the
memslot's compatibility with respect to large pages changes, but without
changing the validity of the gpf->pfn walk. I.e. if a memslot is moved
between mapping_level() and snapshotting mmu_seq, it's theoretically
possible to consume a stale disallow_lpage count. But, since KVM zaps
all shadow pages when moving a memslot and forces all vCPUs to reload a
new MMU, the inserted spte will always be thrown away prior to
completing the memslot move, i.e. whether or not the spte accurately
reflects disallow_lpage is irrelevant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor the page fault handlers and mapping_level() to track the max
allowed page level instead of only tracking if a 4k page is mandatory
due to one restriction or another. This paves the way for cleanly
consolidating tdp_page_fault() and nonpaging_page_fault(), and for
eliminating a redundant check on mmu_gfn_lpage_is_disallowed().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the loop which adjusts the allowed page level based on what's
compatible with the associated memslot to use a largest-to-smallest
page size walk. This paves the way for passing around a "max level"
variable instead of having redundant checks and/or multiple booleans.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pre-calculate the max level for a TDP page with respect to MTRR cache
consistency in preparation of replacing force_pt_level with max_level,
and eventually combining the bulk of nonpaging_page_fault() and
tdp_page_fault() into a common helper.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move nonpaging_page_fault() below try_async_pf() to eliminate the
forward declaration of try_async_pf() and to prepare for combining the
bulk of nonpaging_page_fault() and tdp_page_fault() into a common
helper.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold nonpaging_map() into its sole caller, nonpaging_page_fault(), in
preparation for combining the bulk of nonpaging_page_fault() and
tdp_page_fault() into a common helper.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move make_mmu_pages_available() above its first user to put it closer
to related code and eliminate a forward declaration.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we reach here, we have desc->sptes[j] = NULL with j = 0.
So we can replace desc->sptes[0] with 0 to make it more clear.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment in kvm_get_shadow_phys_bits refers to MKTME, but the same is actually
true of SME and SEV. Just use CPUID[0x8000_0008].EAX[7:0] unconditionally if
available, it is simplest and works even if memory is not encrypted.
Cc: stable@vger.kernel.org
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Preparatory work for shattering mmu.c into multiple files. Besides making it easier
to follow, this will also make it possible to write unit tests for various parts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini