we can't use getattr to fetch inline data after getting Fcr caps,
because it can cause deadlock. The solution is try bringing inline
data to page cache when not holding any cap, and hope the inline
data page is still there after getting the Fcr caps. If the page
is still there, pin it in page cache for later IO.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Request reply and cap message can contain inline data. add inline data
to the page cache if there is Fc cap.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The functions ceph_put_snap_context() and iput() test whether their
argument is NULL and then return immediately. Thus the test around the
call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[idryomov@redhat.com: squashed rbd.c hunk, changelog]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid
is only 16 bits. 16 bits should be plenty to let the cap flush updates
pipeline appropriately, but we need to cast in the proper direction when
comparing these differently-sized versions. So downcast the 64-bits one
to 16 bits.
Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
Fix some coccinelle warnings:
fs/ceph/caps.c:2400:6-10: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2401:6-15: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2402:6-17: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2403:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2404:6-22: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2405:6-19: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2440:4-20: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2469:3-16: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2490:2-18: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2519:3-7: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2549:3-12: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2575:2-6: WARNING: Assignment of bool to 0/1
fs/ceph/caps.c:2589:3-7: WARNING: Assignment of bool to 0/1
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
ceph_find_inode() may wait on freeing inode, using it inside the s_mutex
may cause deadlock. (the freeing inode is waiting for OSD read reply, but
dispatch thread is blocked by the s_mutex)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Replace a comma between expression statements by a semicolon. This changes
the semantics of the code, but given the current indentation appears to be
what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:
// <smpl>
@r@
expression e1,e2;
@@
e1
-,
+;
e2;
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
handle following sequence of events:
- mds0 exports an inode to mds1. client receives the cap import
message from mds1. caps from mds0 are removed while handling
the cap import message.
- mds1 exports an inode to mds0. client receives the cap export
message from mds1. handle_cap_export() adds placeholder caps
for mds0
- client receives the first cap export message (for exporting
inode from mds0 to mds1)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
cap import messages are processed by both handle_cap_import() and
handle_cap_grant(). These two functions are not executed in the same
atomic context, so they can races with cap release.
The fix is make handle_cap_import() not release the i_ceph_lock when
it returns. Let handle_cap_grant() release the lock after it finishes
its job.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
So that ceph_add_cap() can be used while i_ceph_lock is locked.
This simplifies the code that handle cap import/export.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Cap message and request reply from non-auth MDS may carry stale
information (corresponding locks are in LOCK states) even they
have the newest inode version. So client should update inode fields
according to issued caps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
cap grant/revoke message from non-auth MDS can update inode's size
and truncate_seq/truncate_size. (the message arrives before auth
MDS's cap trunc message)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
To avoid releasing caps that are being used, encode_inode_release()
should send implemented caps to MDS.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When adjusting caps client wants, MDS does not record caps that are
not allowed. For non-auth MDS, it does not record WR caps. So when
a MDS reply changes a non-auth cap to auth cap, client needs to set
cap's mds_wanted according to the reply.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Only auth MDS can issue write caps to clients, so don't consider
write caps registered with non-auth MDS as valid.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Version 3 cap export message includes information about the imported
caps. It allows us to add the imported caps if the corresponding cap
import message still hasn't been received.
This allow us to handle situation that the importer MDS crashes and
the cap import message is missing.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Version 3 cap import message includes the ID of the exported
caps. It allow us to remove the exported caps if we still haven't
received the corresponding cap export message.
We remove the exported caps because they are stale, keeping them
can compromise consistence.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Some inodes in readdir reply may have no caps. Getattr mds request
for these inodes can return -ESTALE. The fix is consider dentry that
links to inode with no caps as invalid. Invalid dentry causes a
lookup request to send to the mds, the MDS will send caps back.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
handle following sequence of events:
- non-auth MDS revokes Fc cap. queue invalidate work
- auth MDS issues Fc cap through request reply. i_rdcache_gen gets
increased.
- invalidate work runs. it finds i_rdcache_revoking != i_rdcache_gen,
so it does nothing.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
"disconnected" is too easily confused with "DCACHE_DISCONNECTED". I
think "unhashed" is the more precise term here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When a cap get released while composing the cap reconnect message.
We should skip queuing the release message if the cap hasn't been
added to the cap reconnect message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
d_invalidate() is the standard VFS method to invalidate dentry.
compare to d_delete(), it also try shrinking children dentries.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Adding support for fscache to the Ceph filesystem. This would bring it to on
par with some of the other network filesystems in Linux (like NFS, AFS, etc...)
In order to mount the filesystem with fscache the 'fsc' mount option must be
passed.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
ceph_check_caps() requests new max size only when there is Fw cap.
If we call check_max_size() while there is no Fw cap. It updates
i_wanted_max_size and calls ceph_check_caps(), but ceph_check_caps()
does nothing. Later when Fw cap is issued, we call check_max_size()
again. But i_wanted_max_size is equal to 'endoff' at this time, so
check_max_size() doesn't call ceph_check_caps() and we end up with
waiting for the new max size forever.
The fix is duplicate ceph_check_caps()'s "request max size" code in
check_max_size(), and make try_get_cap_refs() wait for the Fw cap
before retry requesting new max size.
This patch also removes the "endoff > (inode->i_size << 1)" check
in check_max_size(). It's useless because there is no corresponding
logic in ceph_check_caps().
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
I encountered below deadlock when running fsstress
wmtruncate work truncate MDS
--------------- ------------------ --------------------------
lock i_mutex
<- truncate file
lock i_mutex (blocked)
<- revoking Fcb (filelock to MIX)
send request ->
handle request (xlock filelock)
At the initial time, there are some dirty pages in the page cache.
When the kclient receives the truncate message, it reduces inode size
and creates some 'out of i_size' dirty pages. wmtruncate work can't
truncate these dirty pages because it's blocked by the i_mutex. Later
when the kclient receives the cap message that revokes Fcb caps, It
can't flush all dirty pages because writepages() only flushes dirty
pages within the inode size.
When the MDS handles the 'truncate' request from kclient, it waits
for the filelock to become stable. But the filelock is stuck in
unstable state because it can't finish revoking kclient's Fcb caps.
The truncate pagecache locking has already caused lots of trouble
for use. I think it's time simplify it by introducing a new mutex.
We use the new mutex to prevent concurrent truncate_inode_pages().
There is no need to worry about race between buffered write and
truncate_inode_pages(), because our "get caps" mechanism prevents
them from concurrent execution.
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
The MDS uses caps message to notify clients about deleted inode.
when receiving a such message, invalidate any alias of the inode.
This makes the kernel release the inode ASAP.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If we receive new caps from the auth MDS and the non-auth MDS is
revoking the newly issued caps, we should release the caps from
the non-auth MDS. The scenario is filelock's state changes from
SYNC to LOCK. Non-auth MDS revokes Fc cap, the client gets Fc cap
from the auth MDS at the same time.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If caps are been revoking by the auth MDS, don't consider them as
issued even they are still issued by non-auth MDS. The non-auth
MDS should also be revoking/exporting these caps, the client just
hasn't received the cap revoke/export message.
The race I encountered is: When caps are exporting to new MDS, the
client receives cap import message and cap revoke message from the
new MDS, then receives cap export message from the old MDS. When
the client receives cap revoke message from the new MDS, the revoking
caps are still issued by the old MDS, so the client does nothing.
Later when the cap export message is received, the client removes
the caps issued by the old MDS. (Another way to fix the race is
calling ceph_check_caps() in handle_cap_export())
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The locking order for pending vmtruncate is wrong, it can lead to
following race:
write wmtruncate work
------------------------ ----------------------
lock i_mutex
check i_truncate_pending check i_truncate_pending
truncate_inode_pages() lock i_mutex (blocked)
copy data to page cache
unlock i_mutex
truncate_inode_pages()
The fix is take i_mutex before calling __ceph_do_pending_vmtruncate()
Fixes: http://tracker.ceph.com/issues/5453
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Drop ignored return value. Fix allocation failure case to not leak.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
We may receive old request reply from the exporter MDS after receiving
the importer MDS' cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
ceph_encode_inode_release() can race with ceph_open() and release
caps wanted by open files. So it should call __ceph_caps_wanted()
to get the wanted caps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
There is deadlock as illustrated bellow. The fix is taking i_mutex
before getting Fw cap reference.
write truncate MDS
--------------------- -------------------- --------------
get Fw cap
lock i_mutex
lock i_mutex (blocked)
request setattr.size ->
<- revoke Fw cap
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Current ceph code tracks directory's completeness in two places.
ceph_readdir() checks i_release_count to decide if it can set the
I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE
flag. This indirection introduces locking complexity.
This patch adds a new variable i_complete_count to ceph_inode_info.
Set i_release_count's value to it when marking a directory complete.
By comparing the two variables, we know if a directory is complete
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
commit c6ffe10015 moved the flag that tracks if the dcache contents
for a directory are complete to dentry. The problem is there are
lots of places that use ceph_dir_{set,clear,test}_complete() while
holding i_ceph_lock. but ceph_dir_{set,clear,test}_complete() may
sleep because they call dput().
This patch basically reverts that commit. For ceph_d_prune(), it's
called with both the dentry to prune and the parent dentry are
locked. So it's safe to access the parent dentry's d_inode and
clear I_COMPLETE flag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
MDS ignores cap update message if migrate_seq mismatch, so when
receiving a cap import message with higher migrate_seq, set mds_want
according to the cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Pull Ceph updates from Sage Weil:
"A few groups of patches here. Alex has been hard at work improving
the RBD code, layout groundwork for understanding the new formats and
doing layering. Most of the infrastructure is now in place for the
final bits that will come with the next window.
There are a few changes to the data layout. Jim Schutt's patch fixes
some non-ideal CRUSH behavior, and a set of patches from me updates
the client to speak a newer version of the protocol and implement an
improved hashing strategy across storage nodes (when the server side
supports it too).
A pair of patches from Sam Lang fix the atomicity of open+create
operations. Several patches from Yan, Zheng fix various mds/client
issues that turned up during multi-mds torture tests.
A final set of patches expose file layouts via virtual xattrs, and
allow the policies to be set on directories via xattrs as well
(avoiding the awkward ioctl interface and providing a consistent
interface for both kernel mount and ceph-fuse users)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
libceph: add support for HASHPSPOOL pool flag
libceph: update osd request/reply encoding
libceph: calculate placement based on the internal data types
ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
ceph: update "ceph_features.h"
libceph: decode into cpu-native ceph_pg type
libceph: rename ceph_pg -> ceph_pg_v1
rbd: pass length, not op for osd completions
rbd: move rbd_osd_trivial_callback()
libceph: use a do..while loop in con_work()
libceph: use a flag to indicate a fault has occurred
libceph: separate non-locked fault handling
libceph: encapsulate connection backoff
libceph: eliminate sparse warnings
ceph: eliminate sparse warnings in fs code
rbd: eliminate sparse warnings
libceph: define connection flag helpers
rbd: normalize dout() calls
rbd: barriers are hard
rbd: ignore zero-length requests
...
Before printing kuid and kgids values convert them into
the initial user namespace.
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Make the uid and gid arguments of send_cap_msg() used to compose
ceph_mds_caps messages of type kuid_t and kgid_t.
- Pass inode->i_uid and inode->i_gid in __send_cap to send_cap_msg()
through variables of type kuid_t and kgid_t.
- Modify struct ceph_cap_snap to store uids and gids in types kuid_t
and kgid_t. This allows capturing inode->i_uid and inode->i_gid in
ceph_queue_cap_snap() without loss and pssing them to
__ceph_flush_snaps() where they are removed from struct
ceph_cap_snap and passed to send_cap_msg().
- In handle_cap_grant translate uid and gids in the initial user
namespace stored in struct ceph_mds_cap into kuids and kgids
before setting inode->i_uid and inode->i_gid.
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The MDS may have incorrect wanted caps after importing caps. So the
client should check the value mds has and send cap update if necessary.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When client wants to release an imported cap, it's possible there
is no reserved cap_release message in corresponding mds session.
so __queue_cap_release causes kernel panic.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Allow revoking duplicated caps issued by non-auth MDS if these caps
are also issued by auth MDS.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
If client sends cap message that requests new max size during
exporting caps, the exporting MDS will drop the message quietly.
So the client may wait for the reply that updates the max size
forever. call handle_cap_grant() for cap import message can
avoid this issue.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Add dirty inode to cap_dirty_migrating list instead, this can avoid
ceph_flush_dirty_caps() entering infinite loop.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
The cap from non-auth mds doesn't have a meaningful max_size value.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sage Weil <sage@inktank.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix safety of rbd_put_client()
rbd: fix a memory leak in rbd_get_client()
ceph: create a new session lock to avoid lock inversion
ceph: fix length validation in parse_reply_info()
ceph: initialize client debugfs outside of monc->mutex
ceph: change "ceph.layout" xattr to be "ceph.file.layout"
Lockdep was reporting a possible circular lock dependency in
dentry_lease_is_valid(). That function needs to sample the
session's s_cap_gen and and s_cap_ttl fields coherently, but needs
to do so while holding a dentry lock. The s_cap_lock field was
being used to protect the two fields, but that can't be taken while
holding a lock on a dentry within the session.
In most cases, the s_cap_gen and s_cap_ttl fields only get operated
on separately. But in three cases they need to be updated together.
Implement a new lock to protect the spots updating both fields
atomically is required.
Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
We have been using i_lock to protect all kinds of data structures in the
ceph_inode_info struct, including lists of inodes that we need to iterate
over while avoiding races with inode destruction. That requires grabbing
a reference to the inode with the list lock protected, but igrab() now
takes i_lock to check the inode flags.
Changing the list lock ordering would be a painful process.
However, using a ceph-specific i_ceph_lock in the ceph inode instead of
i_lock is a simple mechanical change and avoids the ordering constraints
imposed by igrab().
Reported-by: Amon Ott <a.ott@m-privacy.de>
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use a flag on the directory inode to track whether the dcache
contents for a directory were a complete cached copy. Switch to a dentry
flag CEPH_D_COMPLETE that is safely updated by ->d_prune().
Signed-off-by: Sage Weil <sage@newdream.net>
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The pool allocation failures are masked by the pool; there is no need to
spam the console about them. (That's the whole point of having the pool
in the first place.)
Mark msg allocations whose failure is safely handled as such.
Signed-off-by: Sage Weil <sage@newdream.net>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
In e9964c10 we change cap flushing to do a delicate dance because some
inodes on the cap_dirty list could be in a migrating state (got EXPORT but
not IMPORT) in which we couldn't actually flush and move from
dirty->flushing, breaking the while (!empty) { process first } loop
structure. It worked for a single sync thread, but was not reentrant and
triggered infinite loops when multiple syncers came along.
Instead, move inodes with dirty to a separate cap_dirty_migrating list
when in the limbo export-but-no-import state, allowing us to go back to
the simple loop structure (which was reentrant). This is cleaner and more
robust.
Audited the cap_dirty users and this looks fine:
list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we
have dirty caps (which list we're on is irrelevant) and list_del_init()
calls still do the right thing.
Signed-off-by: Sage Weil <sage@newdream.net>
If we grab new_cap, retake the lock, and find we already have a cap now
for the given mds, release new_cap.
Signed-off-by: Sage Weil <sage@newdream.net>
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.
This bug can be reproduced occasionally by running blogbench.
Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>
The NODELAY flag avoids the heuristics that delay cap (issued/wanted)
release. There's no reason for that after we import a cap, and it kills
whatever benefit we get from those delays.
Signed-off-by: Sage Weil <sage@newdream.net>
If we are mid-flush and a cap is migrated to another node, we need to
resend the cap flush message to the new MDS, and do so with the original
flush_seq to avoid leaking across a sync boundary. Previously we didn't
redo the flush (we only flushed newly dirty data), which would cause a
later sync to hang forever.
Signed-off-by: Sage Weil <sage@newdream.net>
The int flushing is global and not clear on each iteration of the loop,
which can cause a second flush of caps to any MDSs with ids greater than
the auth.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use rdcache_gen to indicate whether we "might" have cached
pages. Now we just look at the mapping to determine that. However, some
old behavior remains from that transition.
First, rdcache_gen == 0 no longer means we have no pages. That can happen
at any time (presumably when we carry FILE_CACHE). We should not reset it
to zero, and we should not check that it is zero.
That means that the only purpose for rdcache_revoking is to resolve races
between new issues of FILE_CACHE and an async invalidate. If they are
equal, we should invalidate. On success, we decrement rdcache_revoking,
so that it is no longer equal to rdcache_gen. Similarly, if we success
in doing a sync invalidate, set revoking = gen - 1. (This is a small
optimization to avoid doing unnecessary invalidate work and does not
affect correctness.)
Signed-off-by: Sage Weil <sage@newdream.net>
If the auth cap migrates to another MDS, clear requested_max_size so that
we resend any pending max_size increase requests. This fixes potential
hangs on writes that extend a file and race with an cap migration between
MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
This reverts commit d91f2438d8.
The intent of issue_seq is to distinguish between mds->client messages that
(re)create the cap and those that do not, which means we should _only_ be
updating that value in the create paths. By updating it in handle_cap_grant,
we reset it to zero, which then breaks release.
The larger question is what workload/problem made me think it should be
updated here...
Signed-off-by: Sage Weil <sage@newdream.net>
The i_rdcache_gen value only implies we MAY have cached pages; actually
check the mapping to see if it's worth bothering with an invalidate.
Signed-off-by: Sage Weil <sage@newdream.net>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to update the issue_seq on any grant operation, be it via an MDS
reply or a separate grant message. The update in the grant path was
missing. This broke cap release for inodes in which the MDS sent an
explicit grant message that was not soon after followed by a successful
MDS reply on the same inode.
Also fix the signedness on seq locals.
Signed-off-by: Sage Weil <sage@newdream.net>
If an MDS tries to revoke caps that we don't have, we want to send
releases early since they probably contain the caps message the MDS
is looking for.
Previously, we only sent the messages if we didn't have the inode either. But
in a multi-mds system we can retain the inode after dropping all caps for
a single MDS.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).
This allows the MDS RECALL_STATE process work for inodes that have cached
pages.
Signed-off-by: Sage Weil <sage@newdream.net>
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once. It's also a waste.
So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).
Signed-off-by: Sage Weil <sage@newdream.net>
Stop sending FLUSHSNAP messages when we hit a capsnap that has dirty_pages
or is still writing. We'll send the newer capsnaps only after the older
ones complete.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under. It is used by queue_cap_snap to set up
the cap_snap. However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps. This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).
Signed-off-by: Sage Weil <sage@newdream.net>
When we snapshot dirty metadata that needs to be written back to the MDS,
include dirty xattr metadata. Make the capsnap reference the encoded
xattr blob so that it will be written back in the FLUSHSNAP op.
Also fix the capsnap creation guard to include dirty auth or file bits,
not just tests specific to dirty file data or file writes in progress
(this fixes auth metadata writeback).
Signed-off-by: Sage Weil <sage@newdream.net>
We should include the xattr metadata blob in the cap update message any
time we are flushing dirty state, NOT just when we are also dropping the
cap. This fixes async xattr writeback.
Also, clean up the code slightly to avoid duplicating the bit test.
Signed-off-by: Sage Weil <sage@newdream.net>
Normally, if the Fb cap bit is being revoked, we queue an async writeback.
If there is no dirty data but we still hold the cap, this leaves the
client sitting around doing nothing until the cap timeouts expire and the
cap is released on its own (as it would have been without the revocation).
Instead, only queue writeback if the bit is actually used (i.e., we have
dirty data). If not, we can reply to the revocation immediately.
Signed-off-by: Sage Weil <sage@newdream.net>
When we get a cap EXPORT message, make sure we are connected to all export
targets to ensure we can handle the matching IMPORT.
Signed-off-by: Sage Weil <sage@newdream.net>
Caps related accounting is now being done per mds client instead
of just being global. This prepares ground work for a later revision
of the caps preallocated reservation list.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
If we have a capsnap but no auth cap (e.g. because it is migrating to
another mds), bail out and do nothing for now. Do NOT remove the capsnap
from the flush list.
Signed-off-by: Sage Weil <sage@newdream.net>
The caps revocation should either initiate writeback, invalidateion, or
call check_caps to ack or do the dirty work. The primary question is
whether we can get away with only checking the auth cap or whether all
caps need to be checked.
The old code was doing...something else. At the very least, revocations
from non-auth MDSs could break by triggering the "check auth cap only"
case.
Signed-off-by: Sage Weil <sage@newdream.net>
If the file mode is marked as "lazy," perform cached/buffered reads when
the caps permit it. Adjust the rdcache_gen and invalidation logic
accordingly so that we manage our cache based on the FILE_CACHE -or-
FILE_LAZYIO cap bits.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have marked a file as "lazy" (using the ceph ioctl), perform buffered
writes when the MDS caps allow it.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes an issue triggered by running concurrent syncs. One of the syncs
would go through while the other would just hang indefinitely. In any case, we
never actually want to wake a single waiter, so the *_all functions should
be used.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
When we embed a dentry lease release notification in a request, invalidate
our lease so we don't think we still have it. Otherwise we can get all
sorts of incorrect client behavior when multiple clients are interacting
with the same part of the namespace.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to increase the total and used counters when allocating a new cap
in the non-reserved (cap import) case.
Signed-off-by: Sage Weil <sage@newdream.net>
We can drop caps with an mds request. Ensure we only drop unused AND
clean caps, since the MDS doesn't support cap writeback in that context,
nor do we track it. If caps are dirty, and the MDS needs them back, we
it will revoke and we will flush in the normal fashion.
This fixes a possibly loss of metadata.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have enough memory to allocate a new cap release message, do so, so
that we can send a partial release message immediately. This keeps us from
making the MDS wait when the cap release it needs is in a partially full
release message.
If we fail because of ENOMEM, oh well, they'll just have to wait a bit
longer.
Signed-off-by: Sage Weil <sage@newdream.net>
If we get an IMPORT that give us a cap, but we don't have the inode, queue
a release (and try to send it immediately) so that the MDS doesn't get
stuck waiting for us.
Signed-off-by: Sage Weil <sage@newdream.net>
This is essential, as for the rados block device we'll need
to run in different contexts that would need flags that
are other than GFP_NOFS.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We only need to pass in front_len. Callers can attach any other payload
pieces (middle, data) as they see fit.
Signed-off-by: Sage Weil <sage@newdream.net>
Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure
instead, and fix up the callers (about half of which were wrong anyway).
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.
-static inline struct ceph_client *ceph_client(struct super_block *sb)
-{
- return sb->s_fs_info;
-}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The iterate_session_caps helper traverses the session caps list and tries
to grab an inode reference. However, the __ceph_remove_cap was clearing
the inode backpointer _before_ removing itself from the session list,
causing a null pointer dereference.
Clear cap->ci under protection of s_cap_lock to avoid the race, and to
tightly couple the list and backpointer state. Use a local flag to
indicate whether we are releasing the cap, as cap->session may be modified
by a racing thread in iterate_session_caps.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: use separate class for ceph sockets' sk_lock
ceph: reserve one more caps space when doing readdir
ceph: queue_cap_snap should always queue dirty context
ceph: fix dentry reference leak in dcache readdir
ceph: decode v5 of osdmap (pool names) [protocol change]
ceph: fix ack counter reset on connection reset
ceph: fix leaked inode ref due to snap metadata writeback race
ceph: fix snap context reference leaks
ceph: allow writeback of snapped pages older than 'oldest' snapc
ceph: fix dentry rehashing on virtual .snap dir
We create a ceph_cap_snap if there is dirty cap metadata (for writeback to
mds) OR dirty pages (for writeback to osd). It is thus possible that the
metadata has been written back to the MDS but the OSD data has not when
the cap_snap is created. This results in a cap_snap with dirty(caps) == 0.
The problem is that cap writeback to the MDS isn't necessary, and a
FLUSHSNAP cap op gets no ack from the MDS. This leaves the cap_snap
attached to the inode along with its inode reference.
Fix the problem by dropping the cap_snap if it becomes 'complete' (all
pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs().
Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with
dirty(caps) == 0.
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release
with MDS requests (e.g. setattr). We don't carry refs on most caps, so
this code worked most of the time, but for setattr (utimes) we try to
drop Fscr.
This causes cap state to get slightly out of sync with reality, and may
result in subsequent mds revoke messages getting ignored.
Fix by only releasing unused caps.
Signed-off-by: Sage Weil <sage@newdream.net>
Drop session mutex unconditionally in handle_cap_grant, and do the
check_caps from the handle_cap_grant helper. This avoids using a magic
return value.
Also avoid using a flag variable in the IMPORT case and call
check_caps at the appropriate point.
Signed-off-by: Sage Weil <sage@newdream.net>
Passing a session pointer to ceph_check_caps() used to mean it would leave
the session mutex locked. That wasn't always possible if it wasn't passed
CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a
differet session mutex, which was clearly wrong, and also emitted a
warning when it a racing CPU retook it and we did an unlock from the wrong
context.
This was only a problem when there was more than one MDS.
First, make ceph_check_caps unconditionally drop the session mutex, so that
it is free to lock other sessions as needed. Then adjust the one caller
that passes in a session (handle_cap_grant) accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Added assertion, and cleared one case where the implemented caps were
not following the issued caps.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The flush_dirty_caps() used to loop over the first entry of the cap_dirty
dirty list on the assumption that after calling ceph_check_caps() it would
be removed from the list. This isn't true for caps that are being
migrated between MDSs, where we've received the EXPORT but not the IMPORT.
Instead, do a safe list iteration, and pin the next inode on the list via
the CEPH_I_NOFLUSH flag.
Signed-off-by: Sage Weil <sage@newdream.net>
We should include caps that are mid-migration (we've received the EXPORT,
but not the IMPORT) in the issued caps set.
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the file is actually open for the given caps when we are
waiting for caps. This ensures we will wake up and return EBADF
if another thread closes the file out from under us.
Note that EBADF is also the correct return code from write(2)
when called on a file handle opened for reading (although the
vfs should catch that).
Signed-off-by: Sage Weil <sage@newdream.net>
This was simply broken. Apparently at some point we thought about putting
the snaptrace in the middle section, but didn't.
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the mds session is currently registered before handling
incoming messages. Clean up message handlers to pull mds out
of session->s_mds instead of less trustworthy src field.
Clean up con_{get,put} debug output.
Signed-off-by: Sage Weil <sage@newdream.net>
The destroy_inode path needs no inode locks since there are no
inode references. Update __ceph_remove_cap comment to reflect
that it is called without cap->session->s_mutex in this case.
Signed-off-by: Sage Weil <sage@newdream.net>
There is no state in local vars that requires us to loop after temporarily
dropping i_lock.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We need to know whether there was any page left behind, and not the
return value (the total number of pages invalidated). Look at the mapping
to see if we were successful or not.
Move it all into a helper to simplify the two callers.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We need to be able to iterate over all caps on a session with a
possibly slow callback on each cap. To allow this, we used to
prevent cap reordering while we were iterating. However, we were
not safe from races with removal: removing the 'next' cap would
make the next pointer from list_for_each_entry_safe be invalid,
and cause a lock up or similar badness.
Instead, we keep an iterator pointer in the session pointing to
the current cap. As before, we avoid reordering. For removal,
if the cap isn't the current cap we are iterating over, we are
fine. If it is, we clear cap->ci (to mark the cap as pending
removal) but leave it in the session list. In iterate_caps, we
can safely finish removal and get the next cap pointer.
While we're at it, clean up put_cap to not take a cap reservation
context, as it was never used.
Signed-off-by: Sage Weil <sage@newdream.net>
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max. This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.
Signed-off-by: Sage Weil <sage@newdream.net>
We were invalidating mapping pages when dropping FILE_CACHE in
__send_cap(). But ceph_check_caps attempts to invalidate already, and
also checks for success, so we should never get to this point.
Signed-off-by: Sage Weil <sage@newdream.net>
Try to invalidate pages in ceph_check_caps() if FILE_CACHE is being
revoked. If we fail, queue an immediate async invalidate if FILE_CACHE
is being revoked. (If it's not being revoked, we just queue the caps
for later evaluation later, as per the old behavior.)
Signed-off-by: Sage Weil <sage@newdream.net>
Many (most?) message types include a transaction id. By including it in
the fixed size header, we always have it available even when we are unable
to allocate memory for the (larger, variable sized) message body. This
will allow us to error out the appropriate request instead of (silently)
dropping the reply.
Signed-off-by: Sage Weil <sage@newdream.net>
Avoid confusing iterate_session_caps(), flag the session while we are
iterating so that __touch_cap does not rearrange items on the list.
All other modifiers of session->s_caps do so under the protection of
s_mutex.
Signed-off-by: Sage Weil <sage@newdream.net>
We occasionally want to make a best-effort attempt to invalidate cache
pages without fear of blocking. If this fails, we fall back to an async
invalidate in another thread.
Use invalidate_mapping_pages instead of invalidate_inode_page2, as that
will skip locked pages, and not deadlock.
Signed-off-by: Sage Weil <sage@newdream.net>
We don't get an explicit affirmative confirmation that our caps reconnect,
nor do we necessarily want to pay that cost. So, take all this code out
for now.
Signed-off-by: Sage Weil <sage@newdream.net>
We were using the cap_gen to track both stale caps (caps that timed out
due to temporarily losing touch with the mds) and dead caps that did not
reconnect after an MDS failure. Introduce a recon_gen counter to track
reconnections to restarted MDSs and kill dead caps based on that instead.
Rename gen to cap_gen while we're at it to make it more clear which is
which.
Signed-off-by: Sage Weil <sage@newdream.net>
This simplifies much of the error handling during mount. It also means
that we have the mount args before client creation, and we can initialize
based on those options.
Signed-off-by: Sage Weil <sage@newdream.net>
Previously we were flushing dirty caps by passing an extra flag
when traversing the delayed caps list. Besides being a bit ugly,
that can also miss caps that are dirty but didn't result in a
cap requeue: notably, mark_caps_dirty().
Separate the flushing into a separate helper, and traverse the
cap_dirty list.
This also brings i_dirty_item in line with i_dirty_caps: we are
on the list IFF caps != 0. We carry an inode ref IFF
dirty_caps|flushing_caps != 0.
Lose the unused return value from __ceph_mark_caps_dirty().
Signed-off-by: Sage Weil <sage@newdream.net>
The Ceph metadata servers control client access to inode metadata and
file data by issuing capabilities, granting clients permission to read
and/or write both inode field and file data to OSDs (storage nodes).
Each capability consists of a set of bits indicating which operations
are allowed.
If the client holds a *_SHARED cap, the client has a coherent value
that can be safely read from the cached inode.
In the case of a *_EXCL (exclusive) or FILE_WR capabilities, the client
is allowed to change inode attributes (e.g., file size, mtime), note
its dirty state in the ceph_cap, and asynchronously flush that
metadata change to the MDS.
In the event of a conflicting operation (perhaps by another client),
the MDS will revoke the conflicting client capabilities.
In order for a client to cache an inode, it must hold a capability
with at least one MDS server. When inodes are released, release
notifications are batched and periodically sent en masse to the MDS
cluster to release server state.
Signed-off-by: Sage Weil <sage@newdream.net>
Yan, Zheng