When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block. It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched. If the mount point before had a longer
path than the current one, it can be reconstructed.
Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/". The super block buffer then contains
"/\x00edia/johnjdeveloper".
This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...
Fix this by using strncpy() instead of strlcpy(). The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h. The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.
Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fast commit file system states are recorded in
sbi->s_mount_flags. Fast commit expects these bit manipulations to be
atomic. This patch adds helpers to make those modifications atomic.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-21-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl8/Q9YACgkQ8vlZVpUN
gaPz+wgAkiWwpge0pfcukABW9FcHK9R82IPggA/NnFu0I+3trpqVQP8mYWqg+1l7
X0W6B6GHMcITGdwxVDNGHHv0WabXCqFPT0ENwW1cnl9UL6I91Ev2NjmG9HP6hVZa
g3+NyXJwiOP38xsxpPJGPoYFw2wZyv8/e41MMnsE6goYjMmB04sHvXCUQkbN41Fn
3CMdsiueYZDAKflvAlL50Jy7Imz5tq9oy81/z+amqvWo4T0U8zRwQuf25nBAhr25
1WdT4CbCNGO2Qwyu9X+t/KGNVIQhCctkx/yz71l3p2piEGkw/XE4VJNrkmWb0zN7
k9F5uGOZlAlQEzx+5PN//Qtz1Db0QQ==
=E6vv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Improvements to ext4's block allocator performance for very large file
systems, especially when the file system or files which are highly
fragmented. There is a new mount option, prefetch_block_bitmaps which
will pull in the block bitmaps and set up the in-memory buddy bitmaps
when the file system is initially mounted.
Beyond that, a lot of bug fixes and cleanups. In particular, a number
of changes to make ext4 more robust in the face of write errors or
file system corruptions"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: limit the length of per-inode prealloc list
ext4: reorganize if statement of ext4_mb_release_context()
ext4: add mb_debug logging when there are lost chunks
ext4: Fix comment typo "the the".
jbd2: clean up checksum verification in do_one_pass()
ext4: change to use fallthrough macro
ext4: remove unused parameter of ext4_generic_delete_entry function
mballoc: replace seq_printf with seq_puts
ext4: optimize the implementation of ext4_mb_good_group()
ext4: delete invalid comments near ext4_mb_check_limits()
ext4: fix typos in ext4_mb_regular_allocator() comment
ext4: fix checking of directory entry validity for inline directories
fs: prevent BUG_ON in submit_bh_wbc()
ext4: correctly restore system zone info when remount fails
ext4: handle add_system_zone() failure in ext4_setup_system_zone()
ext4: fold ext4_data_block_valid_rcu() into the caller
ext4: check journal inode extents more carefully
ext4: don't allow overlapping system zones
ext4: handle error of ext4_setup_system_zone() on remount
ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
...
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit 378f32bab3 ("ext4: introduce direct I/O write using iomap
infrastructure") we don't properly bail out of RWF_NOWAIT direct IO
write if underlying blocks are not allocated. Also
ext4_dio_write_checks() does not honor RWF_NOWAIT when re-acquiring
i_rwsem. Fix both issues.
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Cc: stable@kernel.org
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200708153516.9507-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Failing to invalid the page cache means data in incoherent, which is
a very bad state for the system. Always fall back to buffered I/O
through the page cache if we can't invalidate mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu> # for ext4
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> # for gfs2
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Running with some debug patches to detect illegal blocking triggered the
extend/unaligned condition in ext4. If ext4 needs to extend the file (and
hence go to buffered IO), or if the app is doing unaligned IO, then ext4
asks the iomap code to wait for IO completion. If the caller asked for
no-wait semantics by setting IOCB_NOWAIT, then ext4 should return -EAGAIN
instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/76152096-2bbb-7682-8fce-4cb498bcd909@kernel.dk
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit "b1b4705d54ab ext4: introduce direct I/O read using
iomap infrastructure", we can easily make ext4 support iopoll
method, just use iomap_dio_iopoll().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200207120758.2411-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we start transaction for mapping every extent for writing
using direct IO. This is unnecessary when we know we are overwriting
already allocated blocks and the overhead of starting a transaction can
be significant especially for multithreaded workloads doing small writes.
Use iomap operations that avoid starting a transaction for direct IO
overwrites.
This improves throughput of 4k random writes - fio jobfile:
[global]
rw=randrw
norandommap=1
invalidate=0
bs=4k
numjobs=16
time_based=1
ramp_time=30
runtime=120
group_reporting=1
ioengine=psync
direct=1
size=16G
filename=file1.0.0:file1.0.1:file1.0.2:file1.0.3:file1.0.4:file1.0.5:file1.0.6:file1.0.7:file1.0.8:file1.0.9:file1.0.10:file1.0.11:file1.0.12:file1.0.13:file1.0.14:file1.0.15:file1.0.16:file1.0.17:file1.0.18:file1.0.19:file1.0.20:file1.0.21:file1.0.22:file1.0.23:file1.0.24:file1.0.25:file1.0.26:file1.0.27:file1.0.28:file1.0.29:file1.0.30:file1.0.31
file_service_type=random
nrfiles=32
from 3018MB/s to 4059MB/s in my test VM running test against simulated
pmem device (note that before iomap conversion, this workload was able
to achieve 3708MB/s because old direct IO path avoided transaction start
for overwrites as well). For dax, the win is even larger improving
throughput from 3042MB/s to 4311MB/s.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191218174433.19380-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We were using shared locking only in case of dioread_nolock mount option in case
of DIO overwrites. This mount condition is not needed anymore with current code,
since:-
1. No race between buffered writes & DIO overwrites. Since buffIO writes takes
exclusive lock & DIO overwrites will take shared locking. Also DIO path will
make sure to flush and wait for any dirty page cache data.
2. No race between buffered reads & DIO overwrites, since there is no block
allocation that is possible with DIO overwrites. So no stale data exposure
should happen. Same is the case between DIO reads & DIO overwrites.
3. Also other paths like truncate is protected, since we wait there for any DIO
in flight to be over.
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-4-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Earlier there was no shared lock in DIO read path. But this patch
(16c54688592ce: ext4: Allow parallel DIO reads)
simplified some of the locking mechanism while still allowing for parallel DIO
reads by adding shared lock in inode DIO read path.
But this created problem with mixed read/write workload. It is due to the fact
that in DIO path, we first start with exclusive lock and only when we determine
that it is a ovewrite IO, we downgrade the lock. This causes the problem, since
we still have shared locking in DIO reads.
So, this patch tries to fix this issue by starting with shared lock and then
switching to exclusive lock only when required based on ext4_dio_write_checks().
Other than that, it also simplifies below cases:-
1. Simplified ext4_unaligned_aio API to ext4_unaligned_io. Previous API was
abused in the sense that it was not really checking for AIO anywhere also it
used to check for extending writes. So this API was renamed and simplified to
ext4_unaligned_io() which actully only checks if the IO is really unaligned.
Now, in case of unaligned direct IO, iomap_dio_rw needs to do zeroing of partial
block and that will require serialization against other direct IOs in the same
block. So we take a exclusive inode lock for any unaligned DIO. In case of AIO
we also need to wait for any outstanding IOs to complete so that conversion from
unwritten to written is completed before anyone try to map the overlapping block.
Hence we take exclusive inode lock and also wait for inode_dio_wait() for
unaligned DIO case. Please note since we are anyway taking an exclusive lock in
unaligned IO, inode_dio_wait() becomes a no-op in case of non-AIO DIO.
2. Added ext4_extending_io(). This checks if the IO is extending the file.
3. Added ext4_dio_write_checks(). In this we start with shared inode lock and
only switch to exclusive lock if required. So in most cases with aligned,
non-extending, dioread_nolock & overwrites, it tries to write with a shared
lock. If not, then we restart the operation in ext4_dio_write_checks(), after
acquiring exclusive lock.
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-3-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Apparently our current rwsem code doesn't like doing the trylock, then
lock for real scheme. So change our dax read/write methods to just do the
trylock for the RWF_NOWAIT case.
This seems to fix AIM7 regression in some scalable filesystems upto ~25%
in some cases. Claimed in commit 942491c9e6 ("xfs: fix AIM7 regression")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20191212055557.11151-2-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch introduces a new direct I/O write path which makes use of
the iomap infrastructure.
All direct I/O writes are now passed from the ->write_iter() callback
through to the new direct I/O handler ext4_dio_write_iter(). This
function is responsible for calling into the iomap infrastructure via
iomap_dio_rw().
Code snippets from the existing direct I/O write code within
ext4_file_write_iter() such as, checking whether the I/O request is
unaligned asynchronous I/O, or whether the write will result in an
overwrite have effectively been moved out and into the new direct I/O
->write_iter() handler.
The block mapping flags that are eventually passed down to
ext4_map_blocks() from the *_get_block_*() suite of routines have been
taken out and introduced within ext4_iomap_alloc().
For inode extension cases, ext4_handle_inode_extension() is
effectively the function responsible for performing such metadata
updates. This is called after iomap_dio_rw() has returned so that we
can safely determine whether we need to potentially truncate any
allocated blocks that may have been prepared for this direct I/O
write. We don't perform the inode extension, or truncate operations
from the ->end_io() handler as we don't have the original I/O 'length'
available there. The ->end_io() however is responsible fo converting
allocated unwritten extents to written extents.
In the instance of a short write, we fallback and complete the
remainder of the I/O using buffered I/O via
ext4_buffered_write_iter().
The existing buffer_head direct I/O implementation has been removed as
it's now redundant.
[ Fix up ext4_dio_write_iter() per Jan's comments at
https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ]
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lift the inode extension/orphan list handling code out from
ext4_iomap_alloc() and apply it within the ext4_dax_write_iter().
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/fd5c84db25d5d0da87d97ed4c36fd844f57da759.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for implementing the iomap direct I/O modifications,
the inode extension/truncate code needs to be moved out from the
ext4_iomap_end() callback. For direct I/O, if the current code
remained, it would behave incorrrectly. Updating the inode size prior
to converting unwritten extents would potentially allow a racing
direct I/O read to find unwritten extents before being converted
correctly.
The inode extension/truncate code now resides within a new helper
ext4_handle_inode_extension(). This function has been designed so that
it can accommodate for both DAX and direct I/O extension/truncate
operations.
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/d41ffa26e20b15b12895812c3cad7c91a6a59bc6.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch introduces a new direct I/O read path which makes use of
the iomap infrastructure.
The new function ext4_do_read_iter() is responsible for calling into
the iomap infrastructure via iomap_dio_rw(). If the read operation
performed on the inode is not supported, which is checked via
ext4_dio_supported(), then we simply fallback and complete the I/O
using buffered I/O.
Existing direct I/O read code path has been removed, as it is now
redundant.
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/f98a6f73fadddbfbad0fc5ed04f712ca0b799f37.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As part of the ext4_iomap_begin() cleanups that precede this patch, we
also split up the IOMAP_REPORT branch into a completely separate
->iomap_begin() callback named ext4_iomap_begin_report(). Again, the
raionale for this change is to reduce the overall clutter within
ext4_iomap_begin().
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/5c97a569e26ddb6696e3d3ac9fbde41317e029a0.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
about the state of the extent status cache.
Dropped workaround for pre-1970 dates which were encoded incorrectly
in pre-4.4 kernels. Since both the kernel correctly generates, and
e2fsck detects and fixes this issue for the past four years, it'e time
to drop the workaround. (Also, it's not like files with dates in the
distant past were all that common in the first place.)
A lot of miscellaneous bug fixes and cleanups, including some ext4
Documentation fixes. Also included are two minor bug fixes in
fs/unicode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl2D5ZIACgkQ8vlZVpUN
gaO8NQf+ONLK5nu8KUk14uh8MOXMisiT+g1iqhynZcqtuZzTr4nKqUbHLmPDHrCC
RiD/gkLhp6u+UlzYRJq6nudunid1be2/1bjoUm6lddE4XLtbeGHhZsGn1+9K/wy+
l8UFMXd8fCOlXNzajS85Hb0KSuzlrGYEjSrNecSa3KLxrv1kM1+FyKFcqQ7Ejs5/
VZYNtWo69R4wSEIawGkEZuNu/wFeLOzqJgxFJLo6zFxTAp449bbEduz12ssmkUhl
QbXH9cXLR4pAZykzMRqHC8UFFTKmpLnc5EiT1Ajxzu4EAzB1SzqRJvbz/3CF3d/Z
gBKDrDlasv75VJqVtqw4mCxmEoEYjw==
=Iwrf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Added new ext4 debugging ioctls to allow userspace to get information
about the state of the extent status cache.
Dropped workaround for pre-1970 dates which were encoded incorrectly
in pre-4.4 kernels. Since both the kernel correctly generates, and
e2fsck detects and fixes this issue for the past four years, it'e time
to drop the workaround. (Also, it's not like files with dates in the
distant past were all that common in the first place.)
A lot of miscellaneous bug fixes and cleanups, including some ext4
Documentation fixes. Also included are two minor bug fixes in
fs/unicode"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
unicode: make array 'token' static const, makes object smaller
unicode: Move static keyword to the front of declarations
ext4: add missing bigalloc documentation.
ext4: fix kernel oops caused by spurious casefold flag
ext4: fix integer overflow when calculating commit interval
ext4: use percpu_counters for extent_status cache hits/misses
ext4: fix potential use after free after remounting with noblock_validity
jbd2: add missing tracepoint for reserved handle
ext4: fix punch hole for inline_data file systems
ext4: rework reserved cluster accounting when invalidating pages
ext4: documentation fixes
ext4: treat buffers with write errors as containing valid data
ext4: fix warning inside ext4_convert_unwritten_extents_endio
ext4: set error return correctly when ext4_htree_store_dirent fails
ext4: drop legacy pre-1970 encoding workaround
ext4: add new ioctl EXT4_IOC_GET_ES_CACHE
ext4: add a new ioctl EXT4_IOC_GETSTATE
ext4: add a new ioctl EXT4_IOC_CLEAR_ES_CACHE
jbd2: flush_descriptor(): Do not decrease buffer head's ref count
ext4: remove unnecessary error check
...
Add most of fs-verity support to ext4. fs-verity is a filesystem
feature that enables transparent integrity protection and authentication
of read-only files. It uses a dm-verity like mechanism at the file
level: a Merkle tree is used to verify any block in the file in
log(filesize) time. It is implemented mainly by helper functions in
fs/verity/. See Documentation/filesystems/fsverity.rst for the full
documentation.
This commit adds all of ext4 fs-verity support except for the actual
data verification, including:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
ext4 stores the verity metadata (Merkle tree and fsverity_descriptor)
past the end of the file, starting at the first 64K boundary beyond
i_size. This approach works because (a) verity files are readonly, and
(b) pages fully beyond i_size aren't visible to userspace but can be
read/written internally by ext4 with only some relatively small changes
to ext4. This approach avoids having to depend on the EA_INODE feature
and on rearchitecturing ext4's xattr support to support paging
multi-gigabyte xattrs into memory, and to support encrypting xattrs.
Note that the verity metadata *must* be encrypted when the file is,
since it contains hashes of the plaintext data.
This patch incorporates work by Theodore Ts'o and Chandan Rajendra.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Remove unnecessary error check in ext4_file_write_iter(),
because this check will be done in upcoming later function --
ext4_write_checks() -> generic_write_checks()
Change-Id: I7b0ab27f693a50765c15b5eaa3f4e7c38f42e01e
Signed-off-by: shisiyuan <shisiyuan@xiaomi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
persistent memory device that allows a guest VM to use DAX mechanisms to
access a host-file with host-page-cache. It arranges for MAP_SYNC to
be disabled and instead triggers a host fsync() when a 'write-cache
flush' command is sent to the virtual disk device.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=uAMG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
Dont support 'MAP_SYNC' with non-DAX files and DAX files
with asynchronous dax_device. Virtio pmem provides
asynchronous host page cache flush mechanism. We don't
support 'MAP_SYNC' with virtio pmem and ext4.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
According to the chattr man page, "a file with the 'i' attribute
cannot be modified..." Historically, this was only enforced when the
file was opened, per the rest of the description, "... and the file
can not be opened in write mode".
There is general agreement that we should standardize all file systems
to prevent modifications even for files that were opened at the time
the immutable flag is set. Eventually, a change to enforce this at
the VFS layer should be landing in mainline. Until then, enforce this
at the ext4 level to prevent xfstests generic/553 from failing.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: stable@kernel.org
Unaligned AIO must be serialized because the zeroing of partial blocks
of unaligned AIO can result in data corruption in case it's overlapping
another in flight IO.
Currently we wait for all unwritten extents before we submit unaligned
AIO which protects data in case of unaligned AIO is following overlapping
IO. However if a unaligned AIO is followed by overlapping aligned AIO we
can still end up corrupting data.
To fix this, we must make sure that the unaligned AIO is the only IO in
flight by waiting for unwritten extents conversion not just before the
IO submission, but right after it as well.
This problem can be reproduced by xfstest generic/538
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.
However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.
This is (very simplified) reproducer from Frank
// 41472 = (10 * 4096) + 512
// 37376 = 41472 - 4096
ftruncate(fd, 41472);
io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);
io_submit(io_ctx, 1, &iocbs[1]);
io_submit(io_ctx, 1, &iocbs[2]);
io_getevents(io_ctx, 2, 2, events, NULL);
Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
*
0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
With this patch the data corruption is avoided because we will recognize
the unaligned_aio and wait for the unwritten extent conversion.
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
*
0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
*
0000b200
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: e9e3bcecf4 ("ext4: serialize unaligned asynchronous DIO")
Cc: stable@vger.kernel.org
This patch is reworked from an earlier patch that Dan has posted:
https://patchwork.kernel.org/patch/10131727/
VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that
the memory page it is dealing with is not typical memory from the linear
map. The get_user_pages_fast() path, since it does not resolve the vma,
is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we
use that as a VM_MIXEDMAP replacement in some locations. In the cases
where there is no pte to consult we fallback to using vma_is_dax() to
detect the VM_MIXEDMAP special case.
Now that we have explicit driver pfn_t-flag opt-in/opt-out for
get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This
also means we no longer need to worry about safely manipulating vm_flags
in a future where we support dynamically changing the dax mode of a
file.
DAX should also now be supported with madvise_behavior(), vma_merge(),
and copy_page_range().
This patch has been tested against ndctl unit test. It has also been
tested against xfstests commit: 625515d using fake pmem created by
memmap and no additional issues have been observed.
Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If fs is frozen after mount and before the first file open, the
update of s_last_mounted bypasses freeze protection and prints out
a WARNING splat:
$ mount /vdf
$ fsfreeze -f /vdf
$ cat /vdf/foo
[ 31.578555] WARNING: CPU: 1 PID: 1415 at
fs/ext4/ext4_jbd2.c:53 ext4_journal_check_start+0x48/0x82
[ 31.614016] Call Trace:
[ 31.614997] __ext4_journal_start_sb+0xe4/0x1a4
[ 31.616771] ? ext4_file_open+0xb6/0x189
[ 31.618094] ext4_file_open+0xb6/0x189
If fs is frozen, skip s_last_mounted update.
[backport hint: to apply to stable tree, need to apply also patches
vfs: add the sb_start_intwrite_trylock() helper
ext4: factor out helper ext4_sample_last_mounted()]
Cc: stable@vger.kernel.org
Fixes: bc0b0d6d69 ("ext4: update the s_last_mounted field in the superblock")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Use new return type vm_fault_t for fault handler. For now,
this is just documenting that the function returns a
VM_FAULT value rather than an errno. Once all instances are
converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
When allocation of underlying block for a page fault fails, we fail the
fault with SIGBUS. However we may well hit ENOSPC just due to lots of
free blocks being held by the running / committing transaction. So
propagate the error from ext4_iomap_begin() and implement do standard
allocation retry loop in ext4_dax_huge_fault().
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 needs to pass through error from its iomap handler to the page
fault handler so that it can properly detect ENOSPC and force
transaction commit and retry the fault (and block allocation). Add
argument to dax_iomap_fault() for passing such error.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
two data corruption bugs involving DAX, as well as a corruption bug
after a crash during a racing fallocate and delayed allocation.
Finally, a number of cleanups and optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloJCiEACgkQ8vlZVpUN
gaOahAgAhcgdPagn/B5w+6vKFdH+hOJLKyGI0adGDyWD9YBXN0wFQvliVgXrTKei
hxW2GdQGc6yHv9mOjvD+4Fn2AnTZk8F3GtG6zdqRM08JGF/IN2Jax2boczG/XnUz
rT9cd3ic2Ff0KaUX+Yos55QwomTh5CAeRPgvB69o9D6L4VJzTlsWKSOBR19FmrSG
NDmzZibgWmHcqzW9Bq8ZrXXx+KB42kUlc8tYYm2n6MTaE0LMvp3d9XcFcnm/I7Bk
MGa2d3/3FArGD6Rkl/E82MXMSElOHJnY6jGYSDaadUeMI5FXkA6tECOSJYXqShdb
ZJwkOBwfv2lbYZJxIBJTy/iA6zdsoQ==
=ZzaJ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- Add support for online resizing of file systems with bigalloc
- Fix a two data corruption bugs involving DAX, as well as a corruption
bug after a crash during a racing fallocate and delayed allocation.
- Finally, a number of cleanups and optimizations.
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve smp scalability for inode generation
ext4: add support for online resizing with bigalloc
ext4: mention noload when recovering on read-only device
Documentation: fix little inconsistencies
ext4: convert timers to use timer_setup()
jbd2: convert timers to use timer_setup()
ext4: remove duplicate extended attributes defs
ext4: add ext4_should_use_dax()
ext4: add sanity check for encryption + DAX
ext4: prevent data corruption with journaling + DAX
ext4: prevent data corruption with inline data + DAX
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ext4: retry allocations conservatively
ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA
ext4: Add iomap support for inline data
iomap: Add IOMAP_F_DATA_INLINE flag
iomap: Switch from blkno to disk offset
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloI8AUACgkQ8vlZVpUN
gaMdjgf8CCW7UhPjoZYwF8sUNtAaX9+JZT1maOcXUhpJ3vRQiRn+AzRH6yBYMm79
+NZBwVlk4dlEe55Wh4yFIStMAstqzCrke4C9CSbExjgHNsJdU4znyYuLRMbLfyO0
6c4NObiAIKJdW1/te1aN90keGC6min8pBZot+FqZsRr+Kq2+IOtM43JAv7efOLev
v3LCjUf9JKxatoB8tgw4AJRa1p18p7D2APWTG05VlFq63TjhVIYNvvwcQlizLwGY
cuEq3X59FbFdX06fJnucujU3WP3ES4/3rhufBK4NNaec5e5dbnH2KlAx7J5SyMIZ
0qUFB/dmXDSb3gsfScSGo1F71Ad0CA==
=asAm
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
We return IOMAP_F_DIRTY flag from ext4_iomap_begin() when asked to
prepare blocks for writing and the inode has some uncommitted metadata
changes. In the fault handler ext4_dax_fault() we then detect this case
(through VM_FAULT_NEEDDSYNC return value) and call helper
dax_finish_sync_fault() to flush metadata changes and insert page table
entry. Note that this will also dirty corresponding radix tree entry
which is what we want - fsync(2) will still provide data integrity
guarantees for applications not using userspace flushing. And
applications using userspace flushing can avoid calling fsync(2) and
thus avoid the performance overhead.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If transaction starting fails, just bail out of the function immediately
instead of checking for that condition throughout the function.
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For synchronous page fault dax_iomap_fault() will need to return PFN
which will then need to be inserted into page tables after fsync()
completes. Add necessary parameter to dax_iomap_fault().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to the iomap_seek_hole and iomap_seek_data helpers for
implementing lseek SEEK_HOLE / SEEK_DATA, and remove all the code that
isn't needed any more.
Note that with this patch ext4 will now always depend on the iomap code
instead of only when CONFIG_DAX is enabled, and it requires adding a
call into the extent status tree for iomap_begin as well to properly
deal with delalloc extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
[More fixes and cleanups by Andreas]
Pull nowait read support from Al Viro:
"Support IOCB_NOWAIT for buffered reads and block devices"
* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block_dev: support RFW_NOWAIT on block device nodes
fs: support RWF_NOWAIT for buffered reads
fs: support IOCB_NOWAIT in generic_file_buffered_read
fs: pass iocb to do_generic_file_read
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Merge updates from Andrew Morton:
- various misc bits
- DAX updates
- OCFS2
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
mm,fork: introduce MADV_WIPEONFORK
x86,mpx: make mpx depend on x86-64 to free up VMA flag
mm: add /proc/pid/smaps_rollup
mm: hugetlb: clear target sub-page last when clearing huge page
mm: oom: let oom_reap_task and exit_mmap run concurrently
swap: choose swap device according to numa node
mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
mm, oom: do not rely on TIF_MEMDIE for memory reserves access
z3fold: use per-cpu unbuddied lists
mm, swap: don't use VMA based swap readahead if HDD is used as swap
mm, swap: add sysfs interface for VMA based swap readahead
mm, swap: VMA based swap readahead
mm, swap: fix swap readahead marking
mm, swap: add swap readahead hit statistics
mm/vmalloc.c: don't reinvent the wheel but use existing llist API
mm/vmstat.c: fix wrong comment
selftests/memfd: add memfd_create hugetlbfs selftest
mm/shmem: add hugetlbfs support to memfd_create()
mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
...
Theodore Ts'o