Pull networking fixes from David Miller:
"Lots of fixes, here goes:
1) NULL deref in qtnfmac, from Gustavo A. R. Silva.
2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.
3) Lost completion messages in AF_XDP, from Magnus Karlsson.
4) Correct bogus self-assignment in rhashtable, from Rishabh
Bhatnagar.
5) Fix regression in ipv6 route append handling, from David Ahern.
6) Fix masking in __set_phy_supported(), from Heiner Kallweit.
7) Missing module owner set in x_tables icmp, from Florian Westphal.
8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.
9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.
10) Fix NULL deref when using chains in act_csum, from Davide Caratti.
11) XDP_REDIRECT needs to check if the interface is up and whether the
MTU is sufficient. From Toshiaki Makita.
12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
connections, from Lorenzo Colitti.
13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
full minute, delaying device unregister. From Eric Dumazet.
14) Update MAC entries in the correct order in ixgbe, from Alexander
Duyck.
15) Don't leave partial mangles bpf program in jit_subprogs, from
Daniel Borkmann.
16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.
17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.
18) Use after free in tun XDP_TX, from Toshiaki Makita.
19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.
20) Don't reuse remainder of RX page when XDP is set in mlx4, from
Saeed Mahameed.
21) Fix window probe handling of TCP rapair sockets, from Stefan
Baranoff.
22) Missing socket locking in smc_ioctl(), from Ursula Braun.
23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.
24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.
25) Two spots in ipv6 do a rol32() on a hash value but ignore the
result. Fixes from Colin Ian King"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
tcp: identify cryptic messages as TCP seq # bugs
ptp: fix missing break in switch
hv_netvsc: Fix napi reschedule while receive completion is busy
MAINTAINERS: Drop inactive Vitaly Bordug's email
net: cavium: Add fine-granular dependencies on PCI
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
ipv6: fix useless rol32 call on hash
ipv6: sr: fix useless rol32 call on hash
net: sched: Using NULL instead of plain integer
net: usb: asix: replace mii_nway_restart in resume path
net: cxgb3_main: fix potential Spectre v1
lib/rhashtable: consider param->min_size when setting initial table size
net/smc: reset recv timeout after clc handshake
net/smc: add error handling for get_user()
net/smc: optimize consumer cursor updates
net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
ipv6: ila: select CONFIG_DST_CACHE
net: usb: rtl8150: demote allmulti message to dev_dbg()
...
Make 'make tar-pkg' work on arm64.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
ARCH=vax isn't in mainline; it can be added back if/when it shows up.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and
$(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
$(LDFLAGS) $(ldflags-y) is equivalent to $(ld_flags).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Over time, the use of the flag SYMBOL_AUTO changed from initially
marking three automatically generated symbols ARCH, KERNELRELEASE and
UNAME_RELEASE to today's effect of protecting symbols from being
written out.
Currently, only symbols of type CHOICE and those with option
defconf_list set have that flag set.
Reflect that change in semantics in the flag's name.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each of 'make {menu,n,g,x}config' uses (needs) pkg-config to make sure
that other required files are present and to determine build flags
settings, but none of these check that pkg-config itself is present.
Add a check for all 4 of these targets and update
Documentation/process/changes.rst to mention 'pkg-config'.
Fixes kernel bugzilla #77511:
https://bugzilla.kernel.org/show_bug.cgi?id=77511
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.
Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.
Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Verify that 'depmod' ($DEPMOD) is installed.
This is a partial revert of commit 620c231c7a
("kbuild: do not check for ancient modutils tools").
Also update Documentation/process/changes.rst to refer to
kmod instead of module-init-tools.
Fixes kernel bugzilla #198965:
https://bugzilla.kernel.org/show_bug.cgi?id=198965
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: stable@vger.kernel.org # any kernel since 2012
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 8370edea81 ("bin2c: move bin2c in scripts/basic") moved bin2c
to the scripts/basic/ directory, incorrectly stating "Kexec wants to
use bin2c and it wants to use it really early in the build process.
See arch/x86/purgatory/ code in later patches."
Commit bdab125c93 ("Revert "kexec/purgatory: Add clean-up for
purgatory directory"") and commit d6605b6bbe ("x86/build: Remove
unnecessary preparation for purgatory") removed the redundant
purgatory build magic entirely.
That means that the move of bin2c was unnecessary in the first place.
fixdep is the only host program that deserves to sit in the
scripts/basic/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
atomic_as_refcounter.cocci script allows detecting
cases when refcount_t type and API should be used
instead of atomic_t.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiline statements with invalid %p<foo> uses produce multiple
warnings. Fix that.
e.g.:
$ cat t_block.c
void foo(void)
{
MY_DEBUG(drv->foo,
"%pk",
foo->boo);
}
$ ./scripts/checkpatch.pl -f t_block.c
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#1: FILE: t_block.c:1:
+void foo(void)
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
WARNING: Invalid vsprintf pointer extension '%pk'
#3: FILE: t_block.c:3:
+ MY_DEBUG(drv->foo,
+ "%pk",
+ foo->boo);
total: 0 errors, 3 warnings, 6 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
t_block.c has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Link: http://lkml.kernel.org/r/9e8341bbe4c9877d159cb512bb701043cbfbb10b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aXcg
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
* tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: suppress warnings from 'getconf LFS_*'
scripts/tags.sh: add __ro_after_init
tools: build: Use HOSTLDFLAGS with fixdep
tools: build: Fixup host c flags
tools build: fix # escaping in .cmd files for future Make
scripts: teach extract-vmlinux about LZ4 and ZSTD
kbuild: remove duplicated comments about PHONY
kbuild: .PHONY is not a variable, but PHONY is
kbuild: do not drop -I without parameter
kbuild: document the KBUILD_KCONFIG env. variable
kconfig: update user kconfig tools doc.
kbuild: delete INSTALL_FW_PATH from kbuild documentation
kbuild: update ARCH alias info for sparc
kbuild: update ARCH alias info for sh
Note that the LZ4 signature is different than that of modern LZ4 as we
use the "legacy" format which suffers from some downsides like inability
to disable compression.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Checking whether output of commands matches the ver_linux pattern in
the version function is original shell implementation legacy code. When
the original implementation failed to locate a particular utility,
it generated error output along the lines of:
ver_linux:line number: command not found.
The awk implementation, does not contain the name of the script within the
body of the error message returned by the subshell when a given utility
fails to be located. The error message returned is along the lines of:
sh: name of utility: command not found
Safeguarding against the ver_linux pattern being found in the output
being parsed may thus be safely omitted.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, input coming from /proc/self/maps is split into fields without
checking whether or not it matches libc.so. This is not efficient.
All text processing should only be performed on lines of input that
match libc.so.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment is the same as in the top-level Makefile.
Also, the comments contain typos:
- the .PHONY variable -> the PHONY variable
- se we can ... -> so we can ...
Instead of fixing the typos, just remove the duplicated comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment line for addtree says "skip if -I has no parameter".
What it actually does is "drop if -I has no parameter". For example,
if you have the compiler flag '-I foo' (a space between), it will be
converted to 'foo'. This completely changes the meaning.
What we want is, "do nothing" for -I without parameter so that
'-I foo' is kept as-is.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
GCC_PLUGIN_SUBDIR has never been used. If you really need this in
the future, please re-add it then.
For now, the code is unused. Remove.
'export HOSTLIBS' is not necessary either.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
When Documentation/scheduler/sched-pelt.c is compiled, it generates
a file called Documentation/scheduler/sched-pelt. As this only
exists after building such tool, we need an explict check
to remove the false-positive.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Introducing a simple bus for the alternate modes. Bus allows
binding drivers to the discovered alternate modes the
partners support.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
64-bit ELF v2 ABI specification for POWER describes, on section "General
Stack Frame Requirements", that the stack should use the following
instructions when compiled with backchain:
mflr r0
std r0, 16(r1)
stdu r1, -XX(r1)
Where XX is the frame size for that function, and this is the value
checkstack.pl will find the stack size for each function.
This patch also simplifies the entire Powerpc section, since just two
type of instructions are used, 'stdu' for 64 bits and 'stwu' for 32 bits
platform.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- introduce __diag_* macros and suppress -Wattribute-alias warnings from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbN450AAoJED2LAQed4NsGFdAP/0fc2NhkzQMvz1EBEc2n93LC
FUXew75tsX2ZewssoLzb4Iepkb/mHU+fjhBaE65S+Xu2/6mNfId9a7HAtywvFyO2
ZUQPXHjMHnLEPRKuzQy34uCy9/wWCiqi8rpWUsOEohmNIcLaF0vMZf5Ifod7wIr7
pnix3b9Q+dY+l49TSsSv4MX7F9qs5fXRhEarcQ3jYEb3yRUEXgmli3hV1wRita/n
tJhFDiIdJDeISDkgmHUuOhjFnv5Yf3WJTXi/ILZ2zvpGjjqNDAwxtyzGnPMShQEc
fxk3/1nkg9h/ScVAaGavrYYmiiH8XsqWY2q6p52jTK3kD+yTXaVakPSmxw8UHImh
aNWQutzMF8GYEsb+ld1ncsNrwfgd40mA25mEyb/ZPSw2IdNBrXtIVbw7XiBLi8eH
recAlRN0MouzD7+sXafgtoKopqanQbB/rMqDO4ULfnVvZLWDmZVbfreCc+qrJtiJ
mqydBMUVxrvB+qf5SHQ7WlDmXWHY1xQuxXzS0gRVGT14EsyD6yhC2D62pEHnB7uG
zE1pGemOCzOlGY6nDAbtQVR1n5AAWEZYveZXUuFn+vuqR7ZtYxCFUFOS0u621zFI
HMI9B81ifdNV2efT2VTVi6Tnnvn44sAXOYjaULX6566EyX0/mOL5CWZlTqn5SKOn
PwNxc7ZeCylTbkZww2c4
=oABr
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- introduce __diag_* macros and suppress -Wattribute-alias warnings
from GCC 8
- fix stack protector test script for x86_64
- fix line number handling in Kconfig
- document that '#' starts a comment in Kconfig
- handle P_SYMBOL property in dump debugging of Kconfig
- correct help message of LD_DEAD_CODE_DATA_ELIMINATION
- fix occasional segmentation faults in Kconfig
* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: loop boundary condition fix
kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
kconfig: handle P_SYMBOL in print_symbol()
kconfig: document Kconfig source file comments
kconfig: fix line numbers for if-entries in menu tree
stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
powerpc: Remove -Wattribute-alias pragmas
disable -Wattribute-alias warning for SYSCALL_DEFINEx()
kbuild: add macro for controlling warnings to linux/compiler.h
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.
This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374
Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().
Further, place a pointer to print_symbol() in the comment above the
list of known property type.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.
If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.
I also deleted 'default n', which is no-op.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may not be the actual real stable mailing list address, but the
stable scripts to actually pick up on the traditional way to mark stable
patches.
There are also reasons to explicitly avoid using the actual mailing list
address, since security patches with embargo dates generally do want the
stable marking, but don't want tools etc to mistakenly send the patch
out to the mailing list early.
So don't warn for things that are still actively used and explicitly
supported.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.
According to the git log, commit a02f0570ae (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced
"if_entry: T_IF expr T_EOL"
by
"if_entry: T_IF expr nl"
but the commit message does not state why this has been done.
When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).
An example for the corrected line numbers:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:4:if
drivers/soc/tegra/Kconfig:6:if
changes to:
drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:1:if
drivers/soc/tegra/Kconfig:4:if
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I
noticed that stack protection was silently disabled. Adding -m64 in
gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been
noticed in commit 2a61f4747e ("stack-protector: test compiler
capability in Kconfig and drop AUTO mode") for
gcc-x86_32-has-stack-protector.sh.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Non gcc-5 builds with CONFIG_STACK_VALIDATION=y and
SKIP_STACK_VALIDATION=1 fail.
Example output:
/bin/sh: init/.tmp_main.o: Permission denied
commit 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace"),
added a mismatched endif. This causes cmd_objtool to get mistakenly
set.
Relocate endif to balance the newly added -record-mcount check.
Link: http://lkml.kernel.org/r/20180608214746.136554-1-gthelen@google.com
Fixes: 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace")
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
The name of the --fix option was renamed, but it was not
changed at the quick help message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and
clean-up Makefile
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VABv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix some bugs introduced by the recent Kconfig syntax extension
- add some symbols about compiler information in Kconfig, such as
CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
- test compiler capability for the stack protector in Kconfig, and
clean-up Makefile
- test compiler capability for GCC-plugins in Kconfig, and clean-up
Makefile
- allow to enable GCC-plugins for COMPILE_TEST
- test compiler capability for KCOV in Kconfig and correct dependency
- remove auto-detect mode of the GCOV format, which is now more nicely
handled in Kconfig
- test compiler capability for mprofile-kernel on PowerPC, and clean-up
Makefile
- misc cleanups
* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
kconfig: fix localmodconfig
sh: remove no-op macro VMLINUX_SYMBOL()
powerpc/kbuild: move -mprofile-kernel check to Kconfig
Documentation: kconfig: add recommended way to describe compiler support
gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
gcc-plugins: test plugin support in Kconfig and clean up Makefile
gcc-plugins: move GCC version check for PowerPC to Kconfig
kcov: test compiler capability in Kconfig and correct dependency
gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
kconfig: add CC_IS_CLANG and CLANG_VERSION
kconfig: add CC_IS_GCC and GCC_VERSION
stack-protector: test compiler capability in Kconfig and drop AUTO mode
kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
When kconfig syntax moved to use $(FOO) for environment variables
localmodconfig was not updated.
Fix so it now works with the new syntax $(FOO)
Fixes: 104daea149 ("kconfig: reference environment variables directly and remove 'option env='")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Run scripts/gcc-plugin.sh from Kconfig so that users can enable
GCC_PLUGINS only when the compiler supports building plugins.
Kconfig defines a new symbol, PLUGIN_HOSTCC. This will contain
the compiler (g++ or gcc) used for building plugins, or empty
if the plugin can not be supported at all.
This allows us to remove all ugly testing in Makefile.gcc-plugins.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
For PowerPC, GCC 5.2 is the requirement for GCC plugins. Move the
version check to Kconfig so that the GCC plugin menus will be hidden
if an older compiler is in use.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency. Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS. This could cause the unmet direct
dependency.
Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.
There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins. Hence, the correct
dependency for KCOV is:
depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc. Hence, the select should be:
select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.
I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog
has the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about
this code since it moved to staging last year, and if it needs
to come back, it can be reverted.
- lustre file system is removed. I've ranted at the lustre
developers about once a year for the past 5 years, with no
real forward progress at all to clean things up and get the
code into the "real" part of the kernel. Given that the
lustre developers continue to work on an external tree and try
to port those changes to the in-kernel tree every once in a
while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the
time working in their out-of-tree location and get things
cleaned up properly to get merged into the tree correctly at a
later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxvjGQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoEwCbBYnyUl3cwCszIJ3L3/zvUWpmqIgAn1DDsAim
dM4lmKg6HX/JBSV4GAN0
=zdta
-----END PGP SIGNATURE-----
Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging and IIO driver update for 4.18-rc1.
It was delayed as I wanted to make sure the final driver deletions did
not cause any major merge issues, and all now looks good.
There are a lot of patches here, just over 1000. The diffstat summary
shows the major changes here:
1007 files changed, 16828 insertions(+), 227770 deletions(-)
Because of this, we might be close to shrinking the overall kernel
source code size for two releases in a row.
There was loads of work in this release cycle, primarily:
- tons of ks7010 driver cleanups
- lots of mt7621 driver fixes and cleanups
- most driver cleanups
- wilc1000 fixes and cleanups
- lots and lots of IIO driver cleanups and new additions
- debugfs cleanups for all staging drivers
- lots of other staging driver cleanups and fixes, the shortlog has
the full details.
but the big user-visable things here are the removal of 3 chunks of
code:
- ncpfs and ipx were removed on schedule, no one has cared about this
code since it moved to staging last year, and if it needs to come
back, it can be reverted.
- lustre file system is removed.
I've ranted at the lustre developers about once a year for the past
5 years, with no real forward progress at all to clean things up
and get the code into the "real" part of the kernel.
Given that the lustre developers continue to work on an external
tree and try to port those changes to the in-kernel tree every once
in a while, this whole thing really really is not working out at
all. So I'm deleting it so that the developers can spend the time
working in their out-of-tree location and get things cleaned up
properly to get merged into the tree correctly at a later date.
Because of these file removals, you will have merge issues on some of
these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
atomisp driver). Just delete those files, it's a simple merge :)
All of this has been in linux-next for a while with no reported
problems"
* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
staging: ipx: delete it from the tree
ncpfs: remove uapi .h files
ncpfs: remove Documentation
ncpfs: remove compat functionality
staging: ncpfs: delete it
staging: lustre: delete the filesystem from the tree.
staging: vc04_services: no need to save the log debufs dentries
staging: vc04_services: vchiq_debugfs_log_entry can be a void *
staging: vc04_services: remove struct vchiq_debugfs_info
staging: vc04_services: move client dbg directory into static variable
staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
staging: vc04_services: no need to check debugfs return values
staging: mt7621-gpio: reorder includes alphabetically
staging: mt7621-gpio: change gc_map to don't use pointers
staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
staging: mt7621-gpio: update #interrupt-cells for the gpio node
staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
staging: mt7621-dts: add missing properties to gpio node
...
This will be useful to describe the clang version dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Move the test for -fstack-protector(-strong) option to Kconfig.
If the compiler does not support the option, the corresponding menu
is automatically hidden. If STRONG is not supported, it will fall
back to REGULAR. If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.
I also turned the 'choice' into only two boolean symbols. The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.
X86 has additional shell scripts in case the compiler supports those
options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR
to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- v9fs updates
- MM
- procfs updates
- lib/ updates
- autofs updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
autofs: small cleanup in autofs_getpath()
autofs: clean up includes
autofs: comment on selinux changes needed for module autoload
autofs: update MAINTAINERS entry for autofs
autofs: use autofs instead of autofs4 in documentation
autofs: rename autofs documentation files
autofs: create autofs Kconfig and Makefile
autofs: delete fs/autofs4 source files
autofs: update fs/autofs4/Makefile
autofs: update fs/autofs4/Kconfig
autofs: copy autofs4 to autofs
autofs4: use autofs instead of autofs4 everywhere
autofs4: merge auto_fs.h and auto_fs4.h
fs/binfmt_misc.c: do not allow offset overflow
checkpatch: improve patch recognition
lib/ucs2_string.c: add MODULE_LICENSE()
lib/mpi: headers cleanup
lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock
lib/idr.c: remove simple_ida_lock
lib/bitmap.c: micro-optimization for __bitmap_complement()
...
There are mode change and rename only patches that are unrecognized
by the get_maintainer.pl script.
Recognize them.
Link: http://lkml.kernel.org/r/bf63101a908d0ff51948164aa60e672368066186.1526949367.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're already using a union of many fields here, so stop abusing the
_mapcount and make page_type its own field. That implies renaming some of
the machinery that creates PageBuddy, PageBalloon and PageKmemcg; bring
back the PG_buddy, PG_balloon and PG_kmemcg names.
As suggested by Kirill, make page_type a bitmask. Because it starts out
life as -1 (thanks to sharing the storage with _mapcount), setting a page
flag means clearing the appropriate bit. This gives us space for probably
twenty or so extra bits (depending how paranoid we want to be about
_mapcount underflow).
Link: http://lkml.kernel.org/r/20180518194519.3820-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the appropriate SPDX tag to these scripts.
Miscellanea:
o Add my copyright to checkpatch
Link: http://lkml.kernel.org/r/d08e49e8f6562c58a63792aa64306d1851f81f4b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new
warnings which are either fixed or disabled by default (enabled with
W=1).
- Validate an untrusted offset in DT overlay function
update_usages_of_a_phandle_reference
- Fix a use after free error of_platform_device_destroy
- Fix an off by 1 string errors in unittest
- Avoid creating a struct device for OPP nodes
- Update DT specific submitting-patches.txt with patch content and
subject requirements.
- Move some bindings to their proper subsystem locations
- Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and
ArcherMind
- Add documentation for "no-gpio-delays" property in FSI bus GPIO master
- Add compatible for r8a77990 SoC ravb ethernet block
- More wack-a-mole removal of 'status' property in examples
-----BEGIN PGP SIGNATURE-----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=2b7G
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new
warnings which are either fixed or disabled by default (enabled with
W=1).
- Validate an untrusted offset in DT overlay function
update_usages_of_a_phandle_reference
- Fix a use after free error of_platform_device_destroy
- Fix an off by 1 string errors in unittest
- Avoid creating a struct device for OPP nodes
- Update DT specific submitting-patches.txt with patch content and
subject requirements.
- Move some bindings to their proper subsystem locations
- Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD,
and ArcherMind
- Add documentation for "no-gpio-delays" property in FSI bus GPIO
master
- Add compatible for r8a77990 SoC ravb ethernet block
- More wack-a-mole removal of 'status' property in examples
* tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
dt-bindings: submitting-patches: add guidance on patch content and subject
of: platform: stop accessing invalid dev in of_platform_device_destroy
dt-bindings: net: ravb: Add support for r8a77990 SoC
dt-bindings: Add vendor prefix for ArcherMind
dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property
dt-bindings: Add vendor prefix for Logic PD
of: overlay: validate offset from property fixups
of: unittest: for strings, account for trailing \0 in property length field
drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays
kbuild: disable new dtc graph and unit-address warnings
scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc
MAINTAINERS: add keyword for devicetree overlay notifiers
dt-bindings: define vendor prefix for Wi2Wi, Inc.
dt-bindings: Add vendor prefix for Avnet, Inc.
dt-bindings: Relocate Tegra20 memory controller bindings
dt-bindings: Add "sifive" vendor prefix
dt-bindings: exynos: move ADC binding to iio/adc/ directory
dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories
dt-bindings: move various RNG bindings to rng/ directory
dt-bindings: move various timer bindings to timer/ directory
...
Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
patching again.
- Add support for patching barrier_nospec in copy_from_user() and syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
- Several series optimising various parts of the 32-bit code from Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
Thanks to:
Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
Yisheng Xie, YueHaibing.
-----BEGIN PGP SIGNATURE-----
iQIwBAABCAAaBQJbGQKBExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBq
TRAAioK7rz5xYMkxaM3Ng3ybobEeNAwQqOolz98xvmnB9SfDWNuc99vf8cGu0/fQ
zc8AKZ5RcnwipOjyGlxW9oa1ZhVq0xtYnQPiYLEKMdLQmh5D+C7+KpvAd1UElweg
ub40/xDySWfMujfuMSF9JDCWPIXyojt4Xg5nJKIVRrAm/3YMe/+i5Am7NWHuMCEb
aQmZtlYW5Mz81XY0968hjpUO6eKFRmsaM7yFAhGTXx6+oLRpGj1PZB4AwdRIKS2L
Ak7q/VgxtE4W+s3a0GK2s+eXIhGKeFuX9AVnx3nti+8/K1OqrqhDcLMUC/9JpCpv
EvOtO7dxPnZujHjdu4Eai/xNoo4h6zRy7bWqve9LoBM40CP5jljKzu1lwqqb5yO0
jC7/aXhgiSIxxcRJLjoI/TYpZPu40MifrkydmczykdPyPCnMIWEJDcj4KsRL/9Y8
9SSbJzRNC/SgQNTbUYPZFFi6G0QaMmlcbCb628k8QT+Gn3Xkdf/ZtxzqEyoF4Irq
46kFBsiSSK4Bu0rVlcUtJQLgdqytWULO6NKEYnD67laxYcgQd8pGFQ8SjZhRZLgU
q5LA3HIWhoAI4M0wZhOnKXO6JfiQ1UbO8gUJLsWsfF0Fk5KAcdm+4kb4jbI1H4Qk
Vol9WNRZwEllyaiqScZN9RuVVuH0GPOZeEH1dtWK+uWi0lM=
=ZlBf
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for split PMD page table lock on 64-bit Book3S (Power8/9).
- Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
live patching again.
- Add support for patching barrier_nospec in copy_from_user() and
syscall entry.
- A couple of fixes for our data breakpoints on Book3S.
- A series from Nick optimising TLB/mm handling with the Radix MMU.
- Numerous small cleanups to squash sparse/gcc warnings from Mathieu
Malaterre.
- Several series optimising various parts of the 32-bit code from
Christophe Leroy.
- Removal of support for two old machines, "SBC834xE" and "C2K"
("GEFanuc,C2K"), which is why the diffstat has so many deletions.
And many other small improvements & fixes.
There's a few out-of-area changes. Some minor ftrace changes OK'ed by
Steve, and a fix to our powernv cpuidle driver. Then there's a series
touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
been in next for several weeks.
Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"
* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
cpuidle: powernv: Fix promotion from snooze if next state disabled
powerpc: fix build failure by disabling attribute-alias warning in pci_32
ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
powerpc/pkeys: Detach execute_only key on !PROT_EXEC
powerpc/powernv: copy/paste - Mask SO bit in CR
powerpc: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/embedded6xx: Remove C2K board support
powerpc/lib: optimise PPC32 memcmp
powerpc/lib: optimise 32 bits __clear_user()
powerpc/time: inline arch_vtime_task_switch()
powerpc/Makefile: set -mcpu=860 flag for the 8xx
powerpc: Implement csum_ipv6_magic in assembly
powerpc/32: Optimise __csum_partial()
powerpc/lib: Adjust .balign inside string functions for PPC32
...
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix that
was added late in the cycle.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWxftjBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosyAQCgmhb+/HgRYIbsKa8Q70E2pMx5A/za
4rQ37Q9PhDUJlAD/aWXfrqcMm+buAU0yY4K+eb+f2feKXWXxdZ/fuh7+nA4=
=lpXM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
Kconfig now supports new functionality to perform textual substitution.
It has been a while since Linus suggested to move compiler option tests
from makefiles to Kconfig. Finally, here it is. The implementation has
been generalized into a Make-like macro language. Some built-in functions
such as 'shell' are provided. Variables and user-defined functions are
also supported so that 'cc-option', 'ld-option', etc. are implemented as
macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o37+
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"Kconfig now supports new functionality to perform textual
substitution. It has been a while since Linus suggested to move
compiler option tests from makefiles to Kconfig. Finally, here it is.
The implementation has been generalized into a Make-like macro
language.
Some built-in functions such as 'shell' are provided. Variables and
user-defined functions are also supported so that 'cc-option',
'ld-option', etc. are implemented as macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1"
* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: Avoid format overflow warning from GCC 8.1
kbuild: Move last word of nconfig help to the previous line
kconfig: Add testconfig into make help output
kconfig: add basic helper macros to scripts/Kconfig.include
kconfig: show compiler version text in the top comment
kconfig: test: add Kconfig macro language tests
Documentation: kconfig: document a new Kconfig macro language
kconfig: error out if a recursive variable references itself
kconfig: add 'filename' and 'lineno' built-in variables
kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
kconfig: expand lefthand side of assignment statement
kconfig: support append assignment operator
kconfig: support simply expanded variable
kconfig: support user-defined function and recursively expanded variable
kconfig: begin PARAM state only when seeing a command keyword
kconfig: replace $(UNAME_RELEASE) with function call
kconfig: add 'shell' built-in function
kconfig: add built-in function support
kconfig: make default prompt of mainmenu less specific
kconfig: remove sym_expand_string_value()
...
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2LYT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
-----BEGIN PGP SIGNATURE-----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=twst
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This starts to support NVIDIA volta hardware with nouveau, and adds
amdgpu support for the GPU in the Kabylake-G (the intel + radeon
single package chip), along with some initial Intel icelake enabling.
Summary:
New Drivers:
- v3d - driver for broadcom V3D V3.x+ hardware
- xen-front - XEN PV display frontend
core:
- handle zpos normalization in the core
- stop looking at legacy pointers in atomic paths
- improved scheduler documentation
- improved aspect ratio validation
- aspect ratio support for 64:27 and 256:135
- drop unused control node code.
i915:
- Icelake (ICL) enabling
- GuC/HuC refactoring
- PSR/PSR2 enabling and fixes
- DPLL management refactoring
- DP MST fixes
- NV12 enabling
- HDCP improvements
- GEM/Execlist/reset improvements
- GVT improvements
- stolen memory first 4k fix
amdgpu:
- Vega 20 support
- VEGAM support (Kabylake-G)
- preOS scanout buffer reservation
- power management gfxoff support for raven
- SR-IOV fixes
- Vega10 power profiles and clock voltage control
- scatter/gather display support on CZ/ST
amdkfd:
- GFX9 dGPU support
- userptr memory mapping
nouveau:
- major refactoring for Volta GV100 support
tda998x:
- HDMI i2c CEC support
etnaviv:
- removed unused logging code
- license text cleanups
- MMU handling improvements
- timeout fence fix for 50 days uptime
tegra:
- IOMMU support in gr2d/gr3d drivers
- zpos support
vc4:
- syncobj support
- CTM, plane alpha and async cursor support
analogix_dp:
- HPD and aux chan fixes
sun4i:
- MIPI DSI support
tilcdc:
- clock divider fixes for OMAP-l138 LCDK board
rcar-du:
- R8A77965 support
- dma-buf fences fixes
- hardware indexed crtc/du group handling
- generic zplane property support
atmel-hclcdc:
- generic zplane property support
mediatek:
- use generic video mode function
exynos:
- S5PV210 FIMD variant support
- IPP v2 framework
- more HW overlays support"
* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
drm/amdgpu: fix 32-bit build warning
drm/exynos: fimc: signedness bug in fimc_setup_clocks()
drm/exynos: scaler: fix static checker warning
drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
drm/amd/display: Remove use of division operator for long longs
drm/amdgpu: Update GFX info structure to match what vega20 used
drm/amdgpu/pp: remove duplicate assignment
drm/sched: add rcu_barrier after entity fini
drm/amdgpu: move VM BOs on LRU again
drm/amdgpu: consistenly use VM moved flag
drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
drm/amdgpu: further optimize amdgpu_vm_handle_moved
drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
drm/amdgpu: rework VM state machine lock handling v2
drm/amdgpu: Add runtime VCN PG support
drm/amdgpu: Enable VCN static PG by default on RV
drm/amdgpu: Add VCN static PG support on RV
drm/amdgpu: Enable VCN CG by default on RV
drm/amdgpu: Add static CG control for VCN on RV
drm/exynos: Fix default value for zpos plane property
...
Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbXfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymwCACdFbUy2kWwrpZWSfSBpawfrs75lLMAmwVOe+62
9aDsDWzDVUEFxF20qiE6
=CMJ3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the "big" char and misc driver patches for 4.18-rc1.
It's not a lot of stuff here, but there are some highlights:
- coreboot driver updates
- soundwire driver updates
- android binder updates
- fpga big sync, mostly documentation
- lots of minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
vmw_balloon: fixing double free when batching mode is off
MAINTAINERS: Add driver-api/fpga path
fpga: clarify that unregister functions also free
documentation: fpga: move fpga-region.txt to driver-api
documentation: fpga: add bridge document to driver-api
documentation: fpga: move fpga-mgr.txt to driver-api
Documentation: fpga: move fpga overview to driver-api
fpga: region: kernel-doc fixes
fpga: bridge: kernel-doc fixes
fpga: mgr: kernel-doc fixes
fpga: use SPDX
fpga: region: change api, add fpga_region_create/free
fpga: bridge: change api, don't use drvdata
fpga: manager: change api, don't use drvdata
fpga: region: don't use drvdata in common fpga code
Drivers: hv: vmbus: Removed an unnecessary cast from void *
ver_linux: Drop redundant calls to system() to test if file is readable
ver_linux: Move stderr redirection from function parameter to function body
misc: IBM Virtual Management Channel Driver (VMC)
rpmsg: Correct support for MODULE_DEVICE_TABLE()
...
The Lustre filesystem has been in the kernel tree for over 5 years now.
While it has been an endless source of enjoyment for new kernel
developers learning how to do basic codingstyle cleanups, as well as an
semi-entertaining source of bewilderment from the vfs developers any
time they have looked into the codebase to try to figure out how to port
their latest api changes to this filesystem, it has not really moved
forward into the "this is in shape to get out of staging" despite many
half-completed attempts.
And getting code out of staging is the main goal of that portion of the
kernel tree. Code should not stagnate and it feels like having this
code in staging is only causing the development cycle of the filesystem
to take longer than it should. There is a whole separate out-of-tree
copy of this codebase where the developers work on it, and then random
changes are thrown over the wall at staging at some later point in time.
This dual-tree development model has never worked, and the state of this
codebase is proof of that.
So, let's just delete the whole mess. Now the lustre developers can go
off and work in their out-of-tree codebase and not have to worry about
providing valid changelog entries and breaking their patches up into
logical pieces. They can take the time they have spend doing those
types of housekeeping chores and get the codebase into a much better
shape, and it can be submitted for inclusion into the real part of the
kernel tree when ready.
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge faddr2line updates from Josh Poimboeuf:
- revert faddr2line's default output to its original non-code-listing
output, and make the code listing an optional feature
- give faddr2line a real maintainer, so get_maintainer.pl will actually
CC me on future patches
* emailed patches from Josh Poimboeuf <jpoimboe@redhat.com>:
MAINTAINERS: add Josh Poimboeuf as faddr2line maintainer
scripts/faddr2line: make the new code listing format optional
Commit 6870c0165f ("scripts/faddr2line: show the code context")
radically altered the output format of the faddr2line tool. And while
the new list output format might have merit it broke my vim usage and
was hard to read.
Make the new format optional; using a '--list' argument and attempt to
make the output slightly easier to read by adding a little whitespace to
separate the different files and explicitly mark the line in question.
Cc: Changbin Du <changbin.du@intel.com>
Fixes: 6870c0165f ("scripts/faddr2line: show the code context")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(newname, "%s%s", dirname, basename);
^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
sprintf(newname, "%s%s", dirname, basename);
^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
sprintf(newname, "%s%s", dirname, basename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Increase the size of tmpname and newname to make GCC happy.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script to
keep it updated.
- Various LICENSES updates from Thomas, along with a script to check SPDX
tags.
- Work to fix dangling references to documentation files; this involved a
fair number of one-liner comment changes outside of Documentation/
...and the usual list of documentation improvements, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----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=I6FG
-----END PGP SIGNATURE-----
Merge tag 'docs-4.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of work in the docs tree this time around,
including:
- Extensive RST conversions and organizational work in the
memory-management docs thanks to Mike Rapoport.
- An update of Documentation/features from Andrea Parri and a script
to keep it updated.
- Various LICENSES updates from Thomas, along with a script to check
SPDX tags.
- Work to fix dangling references to documentation files; this
involved a fair number of one-liner comment changes outside of
Documentation/
... and the usual list of documentation improvements, typo fixes, etc"
* tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits)
Documentation: document hung_task_panic kernel parameter
docs/admin-guide/mm: add high level concepts overview
docs/vm: move ksm and transhuge from "user" to "internals" section.
docs: Use the kerneldoc comments for memalloc_no*()
doc: document scope NOFS, NOIO APIs
docs: update kernel versions and dates in tables
docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge
docs/vm: transhuge: minor updates
docs/vm: transhuge: change sections order
Documentation: arm: clean up Marvell Berlin family info
Documentation: gpio: driver: Fix a typo and some odd grammar
docs: ranoops.rst: fix location of ramoops.txt
scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode
docs: uio-howto.rst: use a code block to solve a warning
mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback
w1: w1_io.c: fix a kernel-doc warning
Documentation/process/posting: wrap text at 80 cols
docs: admin-guide: add cgroup-v2 documentation
Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'"
Documentation: refcount-vs-atomic: Update reference to LKMM doc.
...
The powerpc toolchain can compile combinations of 32/64 bit and
big/little endian, so it's convenient to consider, e.g.,
`CC -m64 -mbig-endian`
To be the C compiler for the purpose of invoking it to build target
artifacts. So overriding the CC variable to include these flags works
for this purpose.
Unfortunately that is not compatible with the way the proposed new
Kconfig macro language will work.
After previous patches in this series, these flags can be carefully
passed in using flags instead.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scripts/kallsyms.c: function write_src:
"printf", the #1 format specifier "d" need arg type "int",
but the according arg "table_cnt" has type "unsigned int"
scripts/recordmcount.c: function do_file:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "(*w2)(ehdr->e_machine)" has type "unsigned int"
scripts/recordmcount.h: function find_secsym_ndx:
"fprintf", the #1 format specifier "d" need arg type "int",
but the according arg "txtndx" has type "unsigned int"
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kconfig got text processing tools like we see in Make. Add Kconfig
helper macros to scripts/Kconfig.include like we collect Makefile
macros in scripts/Kbuild.include.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
When using a recursively expanded variable, it is a common mistake
to make circular reference.
For example, Make terminates the following code:
X = $(X)
Y := $(X)
Let's detect the circular expansion in Kconfig, too.
On the other hand, a function that recurses itself is a commonly-used
programming technique. So, Make does not check recursion in the
reference with 'call'. For example, the following code continues
running eternally:
X = $(call X)
Y := $(X)
Kconfig allows circular expansion if one or more arguments are given,
but terminates when the same function is recursively invoked 1000 times,
assuming it is a programming mistake.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The special variables, $(filename) and $(lineno), are expanded to a
file name and its line number being parsed, respectively.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Syntax:
$(info,<text>)
$(warning-if,<condition>,<text>)
$(error-if,<condition>,<text)
The 'info' function prints a message to stdout as in Make.
The 'warning-if' and 'error-if' are similar to 'warning' and 'error'
in Make, but take the condition parameter. They are effective only
when the <condition> part is y.
Kconfig does not implement the lazy expansion as used in the 'if'
'and, 'or' functions in Make. In other words, Kconfig does not
support conditional expansion. The unconditional 'error' function
would always terminate the parsing, hence would be useless in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Make expands the lefthand side of assignment statements. In fact,
Kbuild relies on it since kernel makefiles mostly look like this:
obj-$(CONFIG_FOO) += foo.o
Do likewise in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Support += operator. This appends a space and the text on the
righthand side to a variable.
The timing of the evaluation of the righthand side depends on the
flavor of the variable. If the lefthand side was originally defined
as a simple variable, the righthand side is expanded immediately.
Otherwise, the expansion is deferred. Appending something to an
undefined variable results in a recursive variable.
To implement this, we need to remember the flavor of variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit added variable and user-defined function. They
work similarly in the sense that the evaluation is deferred until
they are used.
This commit adds another type of variable, simply expanded variable,
as we see in Make.
The := operator defines a simply expanded variable, expanding the
righthand side immediately. This works like traditional programming
language variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now, we got a basic ability to test compiler capability in Kconfig.
config CC_HAS_STACKPROTECTOR
def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n)
This works, but it is ugly to repeat this long boilerplate.
We want to describe like this:
config CC_HAS_STACKPROTECTOR
bool
default $(cc-option,-fstack-protector)
It is straight-forward to add a new function, but I do not like to
hard-code specialized functions like that. Hence, here is another
feature, user-defined function. This works as a textual shorthand
with parameterization.
A user-defined function is defined by using the = operator, and can
be referenced in the same way as built-in functions. A user-defined
function in Make is referenced like $(call my-func,arg1,arg2), but I
omitted the 'call' to make the syntax shorter.
The definition of a user-defined function contains $(1), $(2), etc.
in its body to reference the parameters. It is grammatically valid
to pass more or fewer arguments when calling it. We already exploit
this feature in our makefiles; scripts/Kbuild.include defines cc-option
which takes two arguments at most, but most of the callers pass only
one argument.
By the way, a variable is supported as a subset of this feature since
a variable is "a user-defined function with zero argument". In this
context, I mean "variable" as recursively expanded variable. I will
add a different flavored variable in the next commit.
The code above can be written as follows:
[Example Code]
success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n)
cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
config CC_HAS_STACKPROTECTOR
def_bool $(cc-option,-fstack-protector)
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_CC_HAS_STACKPROTECTOR=y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, any statement line starts with a keyword with TF_COMMAND
flag. So, the following three lines are dead code.
alloc_string(yytext, yyleng);
zconflval.string = text;
return T_WORD;
If a T_WORD token is returned in this context, it will cause syntax
error in the parser anyway.
The next commit will support the assignment statement where a line
starts with an arbitrary identifier. So, I want the lexer to switch
to the PARAM state only when it sees a command keyword.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This accepts a single command to execute. It returns the standard
output from it.
[Example code]
config HELLO
string
default "$(shell,echo hello world)"
config Y
def_bool $(shell,echo y)
[Result]
$ make -s alldefconfig && tail -n 2 .config
CONFIG_HELLO="hello world"
CONFIG_Y=y
Caveat:
Like environments, functions are expanded in the lexer. You cannot
pass symbols to function arguments. This is a limitation to simplify
the implementation. I want to avoid the dynamic function evaluation,
which would introduce much more complexity.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit adds a new concept 'function' to do more text processing
in Kconfig.
A function call looks like this:
$(function,arg1,arg2,arg3,...)
This commit adds the basic infrastructure to expand functions.
Change the text expansion helpers to take arguments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If "mainmenu" is not specified, "Linux Kernel Configuration" is used
as a default prompt.
Given that Kconfig is used in other projects than Linux, let's use
a more generic prompt, "Main menu".
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no more caller of sym_expand_string_value().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that environments are expanded in the lexer, conf_parse() does
not need to expand them explicitly.
The hack introduced by commit 0724a7c32a ("kconfig: Don't leak
main menus during parsing") can go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
There are two callers of file_lookup(), but there is no more reason
to expand the given path.
[1] zconf_initscan()
This is used to open the first Kconfig. sym_expand_string_value()
has never been used in a useful way here; before opening the first
Kconfig file, obviously there is no symbol to expand. If you use
expand_string_value() instead, environments in KBUILD_KCONFIG would
be expanded, but I do not see practical benefits for that.
[2] zconf_nextfile()
This is used to open the next file from 'source' statement.
Symbols in the path like "arch/$SRCARCH/Kconfig" needed expanding,
but it was replaced with the direct environment expansion. The
environment has already been expanded before the token is passed
to the parser.
By the way, file_lookup() was already buggy; it expanded a given path,
but it used the path before expansion for look-up:
if (!strcmp(name, file->name)) {
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).
However, this turned out not so clever as I had first expected.
Actually, it is problematic. For example, "$(CC) -print-file-name"
is cached. If the compiler is updated, the stale search path causes
build error, which is difficult to figure out. Another problem
scenario is cache files could be touched while install targets are
running under the root permission. We can patch them if desired,
but the build infrastructure is getting uglier and uglier.
Now, we are going to move compiler flag tests to the configuration
phase. If this is completed, the result of compiler tests will be
naturally cached in the .config file. We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.
To start this work with a cleaner code base, remove the kbuild
cache first.
Revert the following commits:
Commit 9a234a2e38 ("kbuild: create directory for make cache only when necessary")
Commit e17c400ae1 ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e56207130 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690b2 ("kbuild: Add a cache for generated variables")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
gcc 5 supports a new -mcount-record option to generate ftrace
tables directly. This avoids the need to run record_mcount
manually.
Use this option when available.
So far doesn't use -mcount-nop, which also exists now.
This is needed to make ftrace work with LTO because the
normal record-mcount script doesn't run over the link
time output.
It should also improve build times slightly in the general
case.
Link: http://lkml.kernel.org/r/20171127213423.27218-12-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.
So lets just drop this as it is no longer used.
Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.
This commit fixes some more weirdnesses.
The nconf also needs ncurses packages. HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set. Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf. Let's pass the ncurses flags only to mconf and nconf.
Currently, the presence of ncurses is not checked for nconf. Let's
show a prompt like the mconf case.
According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.
To simplify the Makefile, move the scripting to a separate file,
and use filechk. The shell script is executed everytime xconfig
is run, but it is not a costly script.
In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Linus Torvalds