While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.
Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.
This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.
Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
live is used to signal to the pagefault thread that the MR is initialized
and ready for use. It should be after the umem is assigned and all other
setup is completed. This prevents races (at least) of the form:
CPU0 CPU1
mlx5_ib_alloc_implicit_mr()
implicit_mr_alloc()
live = 1
imr->umem = umem
num_pending_prefetch_inc()
if (live)
atomic_inc(num_pending_prefetch)
atomic_set(num_pending_prefetch,0) // Overwrites other thread's store
Further, live is being used with SRCU as the 'update' in an
acquire/release fashion, so it can not be read and written raw.
Move all live = 1's to after MR initialization is completed and use
smp_store_release/smp_load_acquire() for manipulating it.
Add a missing live = 0 when an implicit MR child is deleted, before
queuing work to do synchronize_srcu().
The barriers in update_odp_mr() were some broken attempt to create a
acquire/release, but were not even applied consistently and missed the
point, delete it as well.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During destroy setting live = 0 and then synchronize_srcu() prevents
num_pending_prefetch from incrementing, and also, ensures that all work
holding that count is queued on the WQ. Testing before causes races of the
form:
CPU0 CPU1
dereg_mr()
mlx5_ib_advise_mr_prefetch()
srcu_read_lock()
num_pending_prefetch_inc()
if (!live)
live = 0
atomic_read() == 0
// skip flush_workqueue()
atomic_inc()
queue_work();
srcu_read_unlock()
WARN_ON(atomic_read()) // Fails
Swap the order so that the synchronize_srcu() prevents this.
Fixes: a6bc3875f1 ("IB/mlx5: Protect against prefetch of invalid MR")
Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes a race of the form:
CPU0 CPU1
mlx5_ib_invalidate_range() mlx5_ib_invalidate_range()
// This one actually makes npages == 0
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
// This one does nothing
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
dying = 1;
dying = 1;
schedule_work(&umem_odp->work);
// Double schedule of the same work
schedule_work(&umem_odp->work); // BOOM
npages and dying must be read and written under the umem_mutex lock.
Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call
mlx5_ib_update_xlt, and both need to be done in the same locking region,
hoist the lock out of unmap.
This avoids an expensive double critical section in
mlx5_ib_invalidate_range().
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_update_xlt() must be protected against parallel free of the MR it
is accessing, also it must be called single threaded while updating the
HW. Otherwise we can have races of the form:
CPU0 CPU1
mlx5_ib_update_xlt()
mlx5_odp_populate_klm()
odp_lookup() == NULL
pklm = ZAP
implicit_mr_get_data()
implicit_mr_alloc()
<update interval tree>
mlx5_ib_update_xlt
mlx5_odp_populate_klm()
odp_lookup() != NULL
pklm = VALID
mlx5_ib_post_send_wait()
mlx5_ib_post_send_wait() // Replaces VALID with ZAP
This can be solved by putting both the SRCU and the umem_mutex lock around
every call to mlx5_ib_update_xlt(). This ensures that the content of the
interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr)
will not change while it is running, and thus the posted WRs to update the
KLM will always reflect the correct information.
The race above will resolve by either having CPU1 wait till CPU0 completes
the ZAP or CPU0 will run after the add and instead store VALID.
The pagefault path adding children already holds the umem_mutex and SRCU,
so the only missed lock is during MR destruction.
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This code is completely broken, the umem of a ODP MR simply cannot be
discarded without a lot more locking, nor can an ODP mkey be blithely
destroyed via destroy_mkey().
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_for_each_port is already incrementing the iterator's value it
receives therefore, after the first iteration the iterator is increased by
2 which eventually causing wrong queries and possible traces.
Fix the above by removing the old redundant incrementation that was used
before rdma_for_each_port() macro.
Cc: <stable@vger.kernel.org>
Fixes: ea1075edcb ("RDMA: Add and use rdma_for_each_port")
Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org
Signed-off-by: Mohamad Heib <mohamadh@mellanox.com>
Reviewed-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Properly unwind QP counter rebinding in case of failure.
Trying to rebind the counter after unbiding it is not going to work
reliably, move the unbind to the end so it doesn't have to be unwound.
Fixes: b389327df9 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing. On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.
Resolve this by allocating the memory for a message off of the heap
instead of the stack. kmalloc() always will give us a proper memory
location that DMA will work correctly from.
Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the process of moving the debug counters sysfs entries, the commit
mentioned below eliminated the cm_infiniband sysfs directory.
This sysfs directory was tied to the cm_port object allocated in procedure
cm_add_one().
Before the commit below, this cm_port object was freed via a call to
kobject_put(port->kobj) in procedure cm_remove_port_fs().
Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated.
This, however, meant that kfree was never called for the cm_port buffers.
Fix this by adding explicit kfree(port) calls to functions cm_add_one()
and cm_remove_one().
Note: the kfree call in the first chunk below (in the cm_add_one error
flow) fixes an old, undetected memory leak.
Fixes: c87e65cfb9 ("RDMA/cm: Move debug counters to be under relevant IB device")
Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to surrounding error paths, it is likely that 'goto err_get;' is
expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be
missing.
Fixes: c5dfe0ea6f ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
i40iw IB device registration fails with ENODEV.
ib_register_device
setup_device/setup_port_data
i40iw_port_immutable
ib_query_port
iw_query_port
ib_device_get_netdev(ENODEV)
ib_device_get_netdev() does not have a netdev associated
with the ibdev and thus fails.
Use ib_device_set_netdev() to associate netdev to ibdev
in i40iw before IB device registration.
Fixes: 4929116bdf ("RDMA/core: Add common iWARP query port")
Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Reviewed-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the lock inversion complaint:
============================================
WARNING: possible recursive locking detected
5.3.0-rc7-dbg+ #1 Not tainted
--------------------------------------------
kworker/u16:6/171 is trying to acquire lock:
00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm]
but task is already holding lock:
00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&id_priv->handler_mutex);
lock(&id_priv->handler_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u16:6/171:
#0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0
#1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0
#2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm]
stack backtrace:
CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
dump_stack+0x8a/0xd6
__lock_acquire.cold+0xe1/0x24d
lock_acquire+0x106/0x240
__mutex_lock+0x12e/0xcb0
mutex_lock_nested+0x1f/0x30
rdma_destroy_id+0x78/0x4a0 [rdma_cm]
iw_conn_req_handler+0x5c9/0x680 [rdma_cm]
cm_work_handler+0xe62/0x1100 [iw_cm]
process_one_work+0x56d/0xac0
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
This is not a bug as there are actually two lock classes here.
Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org
Fixes: de910bd921 ("RDMA/cma: Simplify locking needed for serialization of callbacks")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dump_qp() is wrongly trying to dump SRQ structures as QP when SRQ is used
by the application. This patch matches the QPID before dumping them. Also
removes unwanted SRQ id addition to QP id xarray.
Fixes: 2f43129127 ("cxgb4: Convert qpidr to XArray")
Link: https://lore.kernel.org/r/20190930074119.20046-1-bharat@chelsio.com
Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In sdma_init if rhashtable_init fails the allocated memory for
tmp_sdma_rht should be released.
Fixes: 5a52a7acf7 ("IB/hfi1: NULL pointer dereference when freeing rhashtable")
Link: https://lore.kernel.org/r/20190925144543.10141-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If an iWARP driver is probed and removed while there are no ips set for
the device, it will lead to a reference count leak on the inet device of
the netdevice.
In addition, the netdevice was accessed after already calling netdev_put,
which could lead to using the netdev after already freed.
Fixes: 4929116bdf ("RDMA/core: Add common iWARP query port")
Link: https://lore.kernel.org/r/20190925123332.10746-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
An extra kfree cleanup was missed since these are now deallocated by core.
Link: https://lore.kernel.org/r/1568848066-12449-1-git-send-email-aditr@vmware.com
Cc: <stable@vger.kernel.org>
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Merge updates from Andrew Morton:
- a few hot fixes
- ocfs2 updates
- almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
zsmalloc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
mm/zsmalloc.c: fix a -Wunused-function warning
zswap: do not map same object twice
zswap: use movable memory if zpool support allocate movable memory
zpool: add malloc_support_movable to zpool_driver
shmem: fix obsolete comment in shmem_getpage_gfp()
mm/madvise: reduce code duplication in error handling paths
mm: mmap: increase sockets maximum memory size pgoff for 32bits
mm/mmap.c: refine find_vma_prev() with rb_last()
riscv: make mmap allocation top-down by default
mips: use generic mmap top-down layout and brk randomization
mips: replace arch specific way to determine 32bit task with generic version
mips: adjust brk randomization offset to fit generic version
mips: use STACK_TOP when computing mmap base address
mips: properly account for stack randomization and stack guard gap
arm: use generic mmap top-down layout and brk randomization
arm: use STACK_TOP when computing mmap base address
arm: properly account for stack randomization and stack guard gap
arm64, mm: make randomization selected by generic topdown mmap layout
arm64, mm: move generic mmap layout functions to mm
arm64: consider stack randomization for mmap base only when necessary
...
[11~From: John Hubbard <jhubbard@nvidia.com>
Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()",
v3.
There are about 50+ patches in my tree [2], and I'll be sending out the
remaining ones in a few more groups:
* The block/bio related changes (Jerome mostly wrote those, but I've had
to move stuff around extensively, and add a little code)
* mm/ changes
* other subsystem patches
* an RFC that shows the current state of the tracking patch set. That
can only be applied after all call sites are converted, but it's good to
get an early look at it.
This is part a tree-wide conversion, as described in fc1d8e7cca ("mm:
introduce put_user_page*(), placeholder versions").
This patch (of 3):
Provide more capable variation of put_user_pages_dirty_lock(), and delete
put_user_pages_dirty(). This is based on the following:
1. Lots of call sites become simpler if a bool is passed into
put_user_page*(), instead of making the call site choose which
put_user_page*() variant to call.
2. Christoph Hellwig's observation that set_page_dirty_lock() is
usually correct, and set_page_dirty() is usually a bug, or at least
questionable, within a put_user_page*() calling chain.
This leads to the following API choices:
* put_user_pages_dirty_lock(page, npages, make_dirty)
* There is no put_user_pages_dirty(). You have to
hand code that, in the rare case that it's
required.
[jhubbard@nvidia.com: remove unused variable in siw_free_plist()]
Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com
Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This cycle mainly saw lots of bug fixes and clean up code across the core
code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better with
the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP
-----BEGIN PGP SIGNATURE-----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=zHXW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"This cycle mainly saw lots of bug fixes and clean up code across the
core code and several drivers, few new functional changes were made.
- Many cleanup and bug fixes for hns
- Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
bnxt_re, efa
- Share the query_port code between all the iWarp drivers
- General rework and cleanup of the ODP MR umem code to fit better
with the mmu notifier get/put scheme
- Support rdma netlink in non init_net name spaces
- mlx5 support for XRC devx and DC ODP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA: Fix double-free in srq creation error flow
RDMA/efa: Fix incorrect error print
IB/mlx5: Free mpi in mp_slave mode
IB/mlx5: Use the original address for the page during free_pages
RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
RDMA/hns: Package operations of rq inline buffer into separate functions
RDMA/hns: Optimize cmd init and mode selection for hip08
IB/hfi1: Define variables as unsigned long to fix KASAN warning
IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
IB/hfi1: Add traces for TID RDMA READ
RDMA/siw: Relax from kmap_atomic() use in TX path
IB/iser: Support up to 16MB data transfer in a single command
RDMA/siw: Fix page address mapping in TX path
RDMA: Fix goto target to release the allocated memory
RDMA/usnic: Avoid overly large buffers on stack
RDMA/odp: Add missing cast for 32 bit
RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
Documentation/infiniband: update name of some functions
RDMA/cma: Fix false error message
RDMA/hns: Fix wrong assignment of qp_access_flags
...
This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a cleanup
to the page walker API and a few memremap related changes round out the
series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of drivers by
using a refcount get/put attachment idiom and remove the convoluted
mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its only
user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without providing
a struct device
- Make walk_page_range() and related use a constant structure for function
pointers
-----BEGIN PGP SIGNATURE-----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=FRGg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
Julian noted that rt_uses_gateway has a more subtle use than 'is gateway
set':
https://lore.kernel.org/netdev/alpine.LFD.2.21.1909151104060.2546@ja.home.ssi.bg/
Revert that part of the commit referenced in the Fixes tag.
Currently, there are no u8 holes in 'struct rtable'. There is a 4-byte hole
in the second cacheline which contains the gateway declaration. So move
rt_gw_family down to the gateway declarations since they are always used
together, and then re-use that u8 for rt_uses_gateway. End result is that
rtable size is unchanged.
Fixes: 1550c17193 ("ipv4: Prepare rtable for IPv6 gateway")
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Pull vfs namei updates from Al Viro:
"Pathwalk-related stuff"
[ Audit-related cleanups, misc simplifications, and easier to follow
nd->root refcounts - Linus ]
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
devpts_pty_kill(): don't bother with d_delete()
infiniband: don't bother with d_delete()
hypfs: don't bother with d_delete()
fs/namei.c: keep track of nd->root refcount status
fs/namei.c: new helper - legitimize_root()
kill the last users of user_{path,lpath,path_dir}()
namei.h: get the comments on LOOKUP_... in sync with reality
kill LOOKUP_NO_EVAL, don't bother including namei.h from audit.h
audit_inode(): switch to passing AUDIT_INODE_...
filename_mountpoint(): make LOOKUP_NO_EVAL unconditional there
filename_lookup(): audit_inode() argument is always 0
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
The cited commit introduced a double-free of the srq buffer in the error
flow of procedure __uverbs_create_xsrq().
The problem is that ib_destroy_srq_user() called in the error flow also
frees the srq buffer.
Thus, if uverbs_response() fails in __uverbs_create_srq(), the srq buffer
will be freed twice.
Cc: <stable@vger.kernel.org>
Fixes: 68e326dea1 ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20190916071154.20383-5-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The error print should indicate that it failed to get the queue
attributes, not network attributes.
Link: https://lore.kernel.org/r/20190910134301.4194-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.
Cc: <stable@vger.kernel.org>
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.
The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().
Fixes: 0f51427bd0 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in a literal string, fix it.
Fixes: 89f81008ba ("RDMA/bnxt_re: expose detailed stats retrieved from HW")
Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Here packages the codes of allocating and freeing rq inline buffer in
hns_roce_create_qp_common function in order to reduce the complexity.
Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two modes for mailbox command (cmd) queue, i.e., event mode and
poll mode. For each mode, we use corresponding semaphores to protect the
cmd queue resource competition, so called event_sem and poll_sem. During
cmd init, both semaphores are initialized and poll mode is selected.
Thus, there is no need to up poll_sema again in cmd_use_polling.
Furthermore, there is no need to down the sema of the other side while
switching mode. This patch aims to decouple the switch between event mode
and poll mode of cmd.
Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds a counter for credit waits to assist field debugging.
Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds traces to debug packet loss and retry for TID RDMA READ
protocol.
Link: https://lore.kernel.org/r/20190911113041.126040.64541.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the transmit path is never executed in an atomic context, we do not
need kmap_atomic() and can always use less demanding kmap().
Link: https://lore.kernel.org/r/20190909132945.30462-1-bmt@zurich.ibm.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To resolve dependencies in following patches
mlx5_ib.h conflict resolved by keeing both hunks
Linux 5.3-rc8
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maximum supported IO size is 8MB for the iSER driver. The current value is
limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able
to handle 16MB IOs without any significant changes. Increasing this limit
can be useful for the storage arrays which are fine tuned for IOs larger
than 8 MB.
This commit allows to configure maximum IO size up to 16MB using the
max_sectors module parameter.
Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the correct kmap()/kunmap() flow to determine page address used for
CRC computation. Using page_address() is wrong, since page might be in
highmem.
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Link: https://lore.kernel.org/r/20190909132427.30264-1-bmt@zurich.ibm.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory
should be released by goto fail.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's never a good idea to put a 1000-byte buffer on the kernel stack. The
compiler warns about this instance when usnic_ib_log_vf() gets inlined
into usnic_ib_pci_probe():
drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=]
As this is only called for debugging purposes in the setup path, it's
trivial to convert to a dynamic allocation.
Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
length is a size_t which is unsigned int on 32 bit:
../drivers/infiniband/core/umem_odp.c: In function 'ib_init_umem_odp':
../include/linux/overflow.h:59:15: warning: comparison of distinct pointer types lacks a cast
59 | (void) (&__a == &__b); \
| ^~
../drivers/infiniband/core/umem_odp.c:220:7: note: in expansion of macro 'check_add_overflow'
Fixes: 204e3e5630 ("RDMA/odp: Check for overflow when computing the umem_odp end")
Link: https://lore.kernel.org/r/20190908080726.30017-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use devm_platform_ioremap_resource() to simplify the code a bit. This is
detected by coccinelle.
Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In addr_handler(), assuming status == 0 and the device already has been
acquired (id_priv->cma_dev != NULL), we get the following incorrect
"error" message:
RDMA CM: ADDR_ERROR: failed to resolve IP. status 0
Fixes: 498683c6a7 ("IB/cma: Add debug messages to error flows")
Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Abstract:
--------
Mellanox ConnetX devices supports packet matching, packet modification and
redirection. These functionalities are also referred to as flow-steering.
To configure a steering rule, the rule is written to the device owned
memory, this memory is accessed and cached by the device when processing
a packet.
Steering rules are constructed from multiple steering entries (STE).
Rules are configured using the Firmware command interface. The Firmware
processes the given driver command and translates them to STEs, then
writes them to the device memory in the current steering tables.
This process is slow due to the architecture of the command interface and
the processing complexity of each rule.
The highlight of this patchset is to cut the middle man (The firmware) and
do steering rules programming into device directly from the driver, with
no firmware intervention whatsoever.
Motivation:
-----------
Software (driver managed) steering allows for high rule insertion rates
compared to the FW steering described above, this is achieved by using
internal RDMA writes to the device owned memory instead of the slow
command interface to program steering rules.
Software (driver managed) steering, doesn't depend on new FW
for new steering functionality, new implementations can be done in the
driver skipping the FW layer.
Performance:
------------
The insertion rate on a single core using the new approach allows
programming ~300K rules per sec. (Done via direct raw test to the new mlx5
sw steering layer, without any kernel layer involved).
Test: TC L2 rules
33K/s with Software steering (this patchset).
5K/s with FW and current driver.
This will improve OVS based solution performance.
Architecture and implementation details:
----------------------------------------
Software steering will be dynamically selected via devlink device
parameter. Example:
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
mlx5 software steering module a.k.a (DR - Direct Rule) is implemented
and contained in mlx5/core/steering directory and controlled by
MLX5_SW_STEERING kconfig flag.
mlx5 core steering layer (fs_core) already provides a shim layer for
implementing different steering mechanisms, software steering will
leverage that as seen at the end of this series.
When Software Steering for a specific steering domain
(NIC/RDMA/Vport/ESwitch, etc ..) is supported, it will cause rules
targeting this domain to be created using SW steering instead of FW.
The implementation includes:
Domain - The steering domain is the object that all other object resides
in. It holds the memory allocator, send engine, locks and other shared
data needed by lower objects such as table, matcher, rule, action.
Each domain can contain multiple tables. Domain is equivalent to
namespaces e.g (NIC/RDMA/Vport/ESwitch, etc ..) as implemented
currently in mlx5_core fs_core (flow steering core).
Table - Table objects are used for holding multiple matchers, each table
has a level used to prevent processing loops. Packets are being
directed to this table once it is set as the root table, this is done
by fs_core using a FW command. A packet is being processed inside the
table matcher by matcher until a successful hit, otherwise the packet
will perform the default action.
Matcher - Matchers objects are used to specify the fields mask for
matching when processing a packet. A matcher belongs to a table, each
matcher can hold multiple rules, each rule with different matching
values corresponding to the matcher mask. Each matcher has a priority
used for rule processing order inside the table.
Action - Action objects are created to specify different steering actions
such as count, reformat (encapsulate, decapsulate, ...), modify
header, forward to table and many other actions. When creating a rule
a sequence of actions can be provided to be executed on a successful
match.
Rule - Rule objects are used to specify a specific match on packets as
well as the actions that should be executed. A rule belongs to a
matcher.
STE - This layer is used to hold the specific STE format for the device
and to convert the requested rule to STEs. Each rule is constructed of
an STE chain, Multiple rules construct a steering graph. Each node in
the graph is a hash table containing multiple STEs. The index of each
STE in the hash table is being calculated using a CRC32 hash function.
Memory pool - Used for managing and caching device owned memory for rule
insertion. The memory is being allocated using DM (device memory) API.
Communication with device - layer for standard RDMA operation using RC QP
to configure the device steering.
Command utility - This module holds all of the FW commands that are
required for SW steering to function.
Patch planning and files:
-------------------------
1) First patch, adds the support to Add flow steering actions to fs_cmd
shim layer.
2) Next 12 patch will add a file per each Software steering
functionality/module as described above. (See patches with title: DR, *)
3) Add CONFIG_MLX5_SW_STEERING for software steering support and enable
build with the new files
4) Next two patches will add the support for software steering in mlx5
steering shim layer
net/mlx5: Add API to set the namespace steering mode
net/mlx5: Add direct rule fs_cmd implementation
5) Last two patches will add the new devlink parameter to select mlx5
steering mode, will be valid only for switchdev mode for now.
Two modes are supported:
1. DMFS - Device managed flow steering
2. SMFS - Software/Driver managed flow steering.
In the DMFS mode, the HW steering entities are created through the
FW. In the SMFS mode this entities are created though the driver
directly.
The driver will use the devlink steering mode only if the steering
domain supports it, for now SMFS will manages only the switchdev
eswitch steering domain.
User command examples:
- Set SMFS flow steering mode::
$ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime
- Read device flow steering mode::
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl1uxPAACgkQSD+KveBX
+j5AkggAymoYqG2G+s8cLa4vQFySaD1Td3VzzWglp7PlpDBE3UcSoMAMg/gIDU1D
8F04PeCsJ6snt1ICk56vPNyAEHWfWeBUd56+QK5lEJBuwozyFvBh6HP81Bnr6T/n
n6uTx45ljAFQPTHJjEOLBPSzEXecLu07+mvpzSoW0F3ehfGbELhL1IkVobr/RELx
z4xZW9uM2vm5ylheWvjf4V1S/SvokgJazW9+4fh//rl8tfXgun5IfPoS0hqKie1/
h5sjcMSYkYR4gLVqrhKmBYHmHVl/h0TYROckW8iC/+XX7ailSo9uPG7lPa6cm+GE
7Bajlbz4oD/K5RWoByo+q+dmyjeVhQ==
=M9bS
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-09-01-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-09-01 (Software steering support)
Abstract:
--------
Mellanox ConnetX devices supports packet matching, packet modification and
redirection. These functionalities are also referred to as flow-steering.
To configure a steering rule, the rule is written to the device owned
memory, this memory is accessed and cached by the device when processing
a packet.
Steering rules are constructed from multiple steering entries (STE).
Rules are configured using the Firmware command interface. The Firmware
processes the given driver command and translates them to STEs, then
writes them to the device memory in the current steering tables.
This process is slow due to the architecture of the command interface and
the processing complexity of each rule.
The highlight of this patchset is to cut the middle man (The firmware) and
do steering rules programming into device directly from the driver, with
no firmware intervention whatsoever.
Motivation:
-----------
Software (driver managed) steering allows for high rule insertion rates
compared to the FW steering described above, this is achieved by using
internal RDMA writes to the device owned memory instead of the slow
command interface to program steering rules.
Software (driver managed) steering, doesn't depend on new FW
for new steering functionality, new implementations can be done in the
driver skipping the FW layer.
Performance:
------------
The insertion rate on a single core using the new approach allows
programming ~300K rules per sec. (Done via direct raw test to the new mlx5
sw steering layer, without any kernel layer involved).
Test: TC L2 rules
33K/s with Software steering (this patchset).
5K/s with FW and current driver.
This will improve OVS based solution performance.
Architecture and implementation details:
----------------------------------------
Software steering will be dynamically selected via devlink device
parameter. Example:
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
mlx5 software steering module a.k.a (DR - Direct Rule) is implemented
and contained in mlx5/core/steering directory and controlled by
MLX5_SW_STEERING kconfig flag.
mlx5 core steering layer (fs_core) already provides a shim layer for
implementing different steering mechanisms, software steering will
leverage that as seen at the end of this series.
When Software Steering for a specific steering domain
(NIC/RDMA/Vport/ESwitch, etc ..) is supported, it will cause rules
targeting this domain to be created using SW steering instead of FW.
The implementation includes:
Domain - The steering domain is the object that all other object resides
in. It holds the memory allocator, send engine, locks and other shared
data needed by lower objects such as table, matcher, rule, action.
Each domain can contain multiple tables. Domain is equivalent to
namespaces e.g (NIC/RDMA/Vport/ESwitch, etc ..) as implemented
currently in mlx5_core fs_core (flow steering core).
Table - Table objects are used for holding multiple matchers, each table
has a level used to prevent processing loops. Packets are being
directed to this table once it is set as the root table, this is done
by fs_core using a FW command. A packet is being processed inside the
table matcher by matcher until a successful hit, otherwise the packet
will perform the default action.
Matcher - Matchers objects are used to specify the fields mask for
matching when processing a packet. A matcher belongs to a table, each
matcher can hold multiple rules, each rule with different matching
values corresponding to the matcher mask. Each matcher has a priority
used for rule processing order inside the table.
Action - Action objects are created to specify different steering actions
such as count, reformat (encapsulate, decapsulate, ...), modify
header, forward to table and many other actions. When creating a rule
a sequence of actions can be provided to be executed on a successful
match.
Rule - Rule objects are used to specify a specific match on packets as
well as the actions that should be executed. A rule belongs to a
matcher.
STE - This layer is used to hold the specific STE format for the device
and to convert the requested rule to STEs. Each rule is constructed of
an STE chain, Multiple rules construct a steering graph. Each node in
the graph is a hash table containing multiple STEs. The index of each
STE in the hash table is being calculated using a CRC32 hash function.
Memory pool - Used for managing and caching device owned memory for rule
insertion. The memory is being allocated using DM (device memory) API.
Communication with device - layer for standard RDMA operation using RC QP
to configure the device steering.
Command utility - This module holds all of the FW commands that are
required for SW steering to function.
Patch planning and files:
-------------------------
1) First patch, adds the support to Add flow steering actions to fs_cmd
shim layer.
2) Next 12 patch will add a file per each Software steering
functionality/module as described above. (See patches with title: DR, *)
3) Add CONFIG_MLX5_SW_STEERING for software steering support and enable
build with the new files
4) Next two patches will add the support for software steering in mlx5
steering shim layer
net/mlx5: Add API to set the namespace steering mode
net/mlx5: Add direct rule fs_cmd implementation
5) Last two patches will add the new devlink parameter to select mlx5
steering mode, will be valid only for switchdev mode for now.
Two modes are supported:
1. DMFS - Device managed flow steering
2. SMFS - Software/Driver managed flow steering.
In the DMFS mode, the HW steering entities are created through the
FW. In the SMFS mode this entities are created though the driver
directly.
The driver will use the devlink steering mode only if the steering
domain supports it, for now SMFS will manages only the switchdev
eswitch steering domain.
User command examples:
- Set SMFS flow steering mode::
$ devlink dev param set pci/0000:06:00.0 name flow_steering_mode value "smfs" cmode runtime
- Read device flow steering mode::
$ devlink dev param show pci/0000:06:00.0 name flow_steering_mode
pci/0000:06:00.0:
name flow_steering_mode type driver-specific
values:
cmode runtime value smfs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jason Gunthorpe