We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.
Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.
So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface. Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.
This also makes the dirent name copy use unsafe_put_user() with a couple
of macros. We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.
Note that this doesn't bother with the legacy cases. Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.
2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
Dumazet.
3) txq null deref in mac80211, from Miaoqing Pan.
4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.
5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.
6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.
7) Various xgmac fixes in stmmac driver from Jose Abreu.
8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
Michal Kubecek.
9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.
10) Fix sleep while atomic in sja1105, from Vladimir Oltean.
11) Suspend/resume deadlock in stmmac, from Thierry Reding.
12) Various UDP GSO fixes from Josh Hunt.
13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
Dumazet.
14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.
15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
selftests/net: add nettest to .gitignore
net: qlogic: Fix memory leak in ql_alloc_large_buffers
nfc: fix memory leak in llcp_sock_bind()
sch_dsmark: fix potential NULL deref in dsmark_init()
net: phy: at803x: use operating parameters from PHY-specific status
net: phy: extract pause mode
net: phy: extract link partner advertisement reading
net: phy: fix write to mii-ctrl1000 register
ipv6: Handle missing host route in __ipv6_ifa_notify
net: phy: allow for reset line to be tied to a sleepy GPIO controller
net: ipv4: avoid mixed n_redirects and rate_tokens usage
r8152: Set macpassthru in reset_resume callback
cxgb4:Fix out-of-bounds MSI-X info array access
Revert "ipv6: Handle race in addrconf_dad_work"
net: make sock_prot_memory_pressure() return "const char *"
rxrpc: Fix rxrpc_recvmsg tracepoint
qmi_wwan: add support for Cinterion CLS8 devices
tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
lib: textsearch: fix escapes in example code
udp: only do GSO if # of segs > 1
...
- Default configs updates.
- Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint
for function arguments. Two kvm changes acked-by Christian Borntraeger.
- Fix -Wunused-but-set-variable warnings in mm code.
- Avoid a constant misuse in qdio.
- Handle a case when cpumf is temporarily unavailable.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl2YhB4ACgkQjYWKoQLX
FBhPigf9Fz/7YLA/9c23TP2OJvdW4pHYn+5DokhKxBKnOV3akKNeZ0wflrQRmcas
AI28fSlI08w6Nqrc5rX7V5cAy9hGVn5QHF8+gKVnw4QgqBINiiqVt8hjQoxWIL0r
HPyib3CxUgaNTOLIXd+4CHW+SdhJp38OItFMp/ctCAnv67oc7dWMhKNfhdU/pdJq
qDWZC7hhejOcvAogyL9mLuMCTT8uJBlqrooFbEBWR10vCfcgLUF2VsGOTXPYDdSJ
CV/c46FGR+2ENflHr2n/IKzJBB105AeyBSuFvRGhyTD7SDB47qFZf34tTuRMAOjE
LToBupk9q4hxPcTxnDRPwZq4b1GuYg==
=23JK
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- defconfig updates
- Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
constraint for function arguments. Two kvm changes acked-by Christian
Borntraeger.
- Fix -Wunused-but-set-variable warnings in mm code.
- Avoid a constant misuse in qdio.
- Handle a case when cpumf is temporarily unavailable.
* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390: mark __insn32_query() as __always_inline
KVM: s390: fix __insn32_query() inline assembly
s390: update defconfigs
s390/pci: mark function(s) __always_inline
s390/mm: mark function(s) __always_inline
s390/jump_label: mark function(s) __always_inline
s390/cpu_mf: mark function(s) __always_inline
s390/atomic,bitops: mark function(s) __always_inline
s390/mm: fix -Wunused-but-set-variable warnings
s390: mark __cpacf_query() as __always_inline
s390/qdio: clarify size of the QIB parm area
s390/cpumf: Fix indentation in sampling device driver
s390/cpumsf: Check for CPU Measurement sampling
s390/cpumf: Use consistant debug print format
__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.
Fix and simplify the code and just use a "memory" clobber.
Fixes: d668139718 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In commit 43d8ce9d65 ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.
The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.
In commit f7b101d330 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 6dc280ebee ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Capitalize the first word in the sentence.
Use obj-m instead of obj-y. obj-y still works, but we have no built-in
objects in external module builds. So, obj-m is better IMHO.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Geert Uytterhoeven reports a strange side-effect of commit 858805b336
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.
[Steps to Reproduce]
$ echo bar > localversion
$ mkdir build
$ cd build/
$ echo foo > localversion
$ make -s -f ../Makefile defconfig include/config/kernel.release
$ cat include/config/kernel.release
5.4.0-rc1foofoobar
This comes down to the behavior change of local variables.
The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
When a variable is made local, it inherits the initial value and
exported and readonly flags from the variable with the same name
in the surrounding scope, if there is one. Otherwise, the variable
is initially unset.
[Test Code]
foo ()
{
local res
echo "res: $res"
}
res=1
foo
[Result]
$ sh test.sh
res: 1
$ bash test.sh
res:
So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.
Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.
Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).
Fixes: 858805b336 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.
Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.
This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.
This behavior was changed in 7e1c04779e ("kbuild: Use relative path
for $(objtree)", 2014-05-14)
Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.
Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.
The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.
rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.
Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.
Files listed in 'targets' are cleaned, so clean-files is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.
subdir-$(CONFIG_...) is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I guess commit 15ea0e1e3e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.
load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:
$(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar
But, you do not need to fix it.
Commit 8c97023cf0 ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
nettest is missing from gitignore.
Fixes: acda655fef ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.
Fixes: 0f8ab89e82 ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
Fix regression with AR8035 speed downgrade
The following series attempts to address an issue spotted by tinywrkb
with the AR8035 on the Cubox-i2 in a situation where the PHY downgrades
the negotiated link.
This is version 2, not much has changed other than rebasing on the
current net tree. Changes have happend to patch 2 due to conflicts,
so I dropped Andrew's reviewed-by. Minor context changes to patch 4
which I don't consider important enough to warrant dropping the
reviewed-by.
Before commit 5502b218e0 ("net: phy: use phy_resolve_aneg_linkmode in
genphy_read_status"), we would read not only the link partner's
advertisement, but also our own advertisement from the PHY registers,
and use both to derive the PHYs current link mode. This works when the
AR8035 downgrades the speed, because it appears that the AR8035 clears
link mode bits in the advertisement registers as part of the downgrade.
Commentary: what is not yet known is whether the AR8035 restores the
advertisement register when the link goes down to the
previous state.
However, since the above referenced commit, we no longer use the PHYs
advertisement registers, instead converting the link partner's
advertisement to the ethtool link mode array, and combine that with
phylib's cached version of our advertisement - which is not updated on
speed downgrade.
This results in phylib disagreeing with the actual operating mode of
the PHY.
Commentary: I wonder how many more PHY drivers are broken by this
commit, but have yet to be discovered.
The obvious way to address this would be to disable the downgrade
feature, and indeed this does fix the problem in tinywrkb's case - his
link partner instead downgrades the speed by reducing its
advertisement, resulting in phylib correctly evaluating a slower speed.
However, it has a serious drawback - the gigabit control register (MII
register 9) appears to become read only. It seems the only way to
update the register is to re-enable the downgrade feature, reset the
PHY, changing register 9, disable the downgrade feature, and reset the
PHY again.
This series attempts to address the problem using a different approach,
similar to the approach taken with Marvell PHYs. The AR8031, AR8033
and AR8035 have a PHY-Specific Status register which reports the
actual operating mode of the PHY - both speed and duplex. This
register correctly reports the operating mode irrespective of whether
autoneg is enabled or not. We use this register to fill in phylib's
speed and duplex parameters.
In detail:
Patch 1 fixes a bug where writing to register 9 does not update
phylib's advertisement mask in the same way that writing register 4
does; this looks like an omission from when gigabit PHY support came
into being.
Patch 2 seperates the generic phylib code which reads the link partners
advertisement from the PHY, so that we can re-use this in the Atheros
PHY driver.
Patch 3 seperates the generic phylib pause mode; phylib provides no
help for MAC drivers to ascertain the negotiated pause mode, it merely
copies the link partner's pause mode bits into its own variables.
Commentary: Both the aforementioned Atheros PHYs and Marvell PHYs
provide the resolved pause modes in terms of whether
we should transmit pause frames, or whether we should
allow reception of pause frames. Surely the resolution
of this should be in phylib?
Patch 4 provides the Atheros PHY driver with a private "read_status"
implementation that fills in phylib's speed and duplex settings
depending on the PHY-Specific status register. This ensures that
phylib and the MAC driver match the operating mode that the PHY has
decided to use. Since the register also gives us MDIX status, we
can trivially fill that status in as well.
Note that, although the bits mentioned in this patch for this register
match those in th Marvell PHY driver, and it is located at the same
address, the meaning of other register bits varies between the PHYs.
Therefore, I do not feel that it would be appropriate to make this some
kind of generic function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Read the PHY-specific status register for the current operating mode
(speed and duplex) of the PHY. This register reflects the actual
mode that the PHY has resolved depending on either the advertisements
of autoneg is enabled, or the forced mode if autoneg is disabled.
This ensures that phylib's software state always tracks the hardware
state.
It seems both AR8033 (which uses the AR8031 ID) and AR8035 support
this status register. AR8030 is not known at the present time.
This patch depends on "net: phy: extract pause mode" and "net: phy:
extract link partner advertisement reading".
Reported-by: tinywrkb <tinywrkb@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: tinywrkb <tinywrkb@gmail.com>
Fixes: 5502b218e0 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the update of phylib's software pause mode state from
genphy_read_status(), so that we can re-use this functionality with
PHYs that have alternative ways to read the negotiation results.
Tested-by: tinywrkb <tinywrkb@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move reading the link partner advertisement out of genphy_read_status()
into its own separate function. This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.
Tested-by: tinywrkb <tinywrkb@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace writes to the MII_ADVERTISE register, we update phylib's
advertising mask and trigger a renegotiation. However, writing to the
MII_CTRL1000 register, which contains the gigabit advertisement, does
neither. This can lead to phylib's copy of the advertisement becoming
de-synced with the values in the PHY register set, which can result in
incorrect negotiation resolution.
Fixes: 5502b218e0 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rajendra reported a kernel panic when a link was taken down:
[ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290
<snip>
[ 6870.570501] Call Trace:
[ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
[ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
[ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
[ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
[ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
[ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
[ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
[ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
[ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
[ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
[ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0
addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in __ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.
Since the DAD sequence can not be aborted, add a check for the missing
host route in __ipv6_ifa_notify. The only way this should happen is due
to the previously mentioned race. The host route is created when the
address is added to an interface; it is only removed on a down event
where the address is kept. Add a warning if the host route is missing
AND the device is up; this is a situation that should never happen.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mdio_device_reset() makes use of the atomic-pretending API flavor for
handling the PHY reset GPIO line.
I found no hint that mdio_device_reset() is called from atomic context
and indeed it uses usleep_range() since long time, so I would assume that
it is OK to sleep there.
This patch switch to gpiod_set_value_cansleep() in mdio_device_reset().
This is relevant if e.g. the PHY reset line is tied to a I2C GPIO
controller.
This has been tested on a ZynqMP board running an upstream 4.19 kernel and
then hand-ported on current kernel tree.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit c09551c6ff ("net: ipv4: use a dedicated counter
for icmp_v4 redirect packets") we use 'n_redirects' to account
for redirect packets, but we still use 'rate_tokens' to compute
the redirect packets exponential backoff.
If the device sent to the relevant peer any ICMP error packet
after sending a redirect, it will also update 'rate_token' according
to the leaking bucket schema; typically 'rate_token' will raise
above BITS_PER_LONG and the redirect packets backoff algorithm
will produce undefined behavior.
Fix the issue using 'n_redirects' to compute the exponential backoff
in ip_rt_send_redirect().
Note that we still clear rate_tokens after a redirect silence period,
to avoid changing an established behaviour.
The root cause predates git history; before the mentioned commit in
the critical scenario, the kernel stopped sending redirects, after
the mentioned commit the behavior more randomic.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: c09551c6ff ("net: ipv4: use a dedicated counter for icmp_v4 redirect packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r8152 may fail to establish network connection after resume from system
suspend.
If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.
So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The gpiod_set_debounce() function takes the debounce time in
microseconds. Adjust the switch/case values in the MAX77620 GPIO to use
the correct unit.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When fetching free MSI-X vectors for ULDs, check for the error code
before accessing MSI-X info array. Otherwise, an out-of-bounds access is
attempted, which results in kernel panic.
Fixes: 94cdb8bb99 ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a3ce2a21bb.
Eric reported tests failings with commit. After digging into it,
the bottom line is that the DAD sequence is not to be messed with.
There are too many cases that are expected to proceed regardless
of whether a device is up.
Revert the patch and I will send a different solution for the
problem Rajendra reported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function returns string literals which are "const char *".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the rxrpc_recvmsg tracepoint to handle being called with a NULL call
parameter.
Fixes: a25e21f0bc ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Build fixes for Cavium Octeon & PMC-Sierra MSP systems, as well as
all pre-MIPSr6 configurations built with binutils < 2.25.
- Boot fixes for 64-bit Loongson systems & SGI IP28 systems.
- Wire up the new clone3 syscall.
- Clean ups for a few build-time warnings.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXZekBBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN1aSQD+OSdb9fs1Gqakn1bM/TmvAB5lNxhM
8Xy47aqWURt4rpIBAJegfqjq2SWyVNxeNV0fNcqQl9DcjABhOyCJ316U6rMD
=TNtT
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Build fixes for Cavium Octeon & PMC-Sierra MSP systems, as well as
all pre-MIPSr6 configurations built with binutils < 2.25.
- Boot fixes for 64-bit Loongson systems & SGI IP28 systems.
- Wire up the new clone3 syscall.
- Clean ups for a few build-time warnings.
* tag 'mips_fixes_5.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fw/arc: Remove unused addr variable
MIPS: pmcs-msp71xx: Remove unused addr variable
MIPS: pmcs-msp71xx: Add missing MAX_PROM_MEM definition
mips: Loongson: Fix the link time qualifier of 'serial_exit()'
MIPS: init: Prevent adding memory before PHYS_OFFSET
MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem start
MIPS: VDSO: Fix build for binutils < 2.25
MIPS: VDSO: Remove unused gettimeofday.c
MIPS: Wire up clone3 syscall
MIPS: octeon: Include required header; fix octeon ethernet build
MIPS: cpu-bugs64: Mark inline functions as __always_inline
MIPS: dts: ar9331: fix interrupt-controller size
MIPS: Loongson64: Fix boot failure after dropping boot_mem_map
Two RISC-V fixes for v5.4-rc2:
- Ensure that exclusive-load reservations are terminated after system
call or exception handling. This primarily affects QEMU, which does
not expire load reservations.
- Fix an issue primarily affecting RV32 platforms that can cause the
DT header to be corrupted, causing boot failures.
-----BEGIN PGP SIGNATURE-----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=yka9
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Ensure that exclusive-load reservations are terminated after system
call or exception handling. This primarily affects QEMU, which does
not expire load reservations.
- Fix an issue primarily affecting RV32 platforms that can cause the DT
header to be corrupted, causing boot failures.
* tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix memblock reservation for device tree blob
RISC-V: Clear load reservations while restoring hart contexts
While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.
Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.
This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.
Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
live is used to signal to the pagefault thread that the MR is initialized
and ready for use. It should be after the umem is assigned and all other
setup is completed. This prevents races (at least) of the form:
CPU0 CPU1
mlx5_ib_alloc_implicit_mr()
implicit_mr_alloc()
live = 1
imr->umem = umem
num_pending_prefetch_inc()
if (live)
atomic_inc(num_pending_prefetch)
atomic_set(num_pending_prefetch,0) // Overwrites other thread's store
Further, live is being used with SRCU as the 'update' in an
acquire/release fashion, so it can not be read and written raw.
Move all live = 1's to after MR initialization is completed and use
smp_store_release/smp_load_acquire() for manipulating it.
Add a missing live = 0 when an implicit MR child is deleted, before
queuing work to do synchronize_srcu().
The barriers in update_odp_mr() were some broken attempt to create a
acquire/release, but were not even applied consistently and missed the
point, delete it as well.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During destroy setting live = 0 and then synchronize_srcu() prevents
num_pending_prefetch from incrementing, and also, ensures that all work
holding that count is queued on the WQ. Testing before causes races of the
form:
CPU0 CPU1
dereg_mr()
mlx5_ib_advise_mr_prefetch()
srcu_read_lock()
num_pending_prefetch_inc()
if (!live)
live = 0
atomic_read() == 0
// skip flush_workqueue()
atomic_inc()
queue_work();
srcu_read_unlock()
WARN_ON(atomic_read()) // Fails
Swap the order so that the synchronize_srcu() prevents this.
Fixes: a6bc3875f1 ("IB/mlx5: Protect against prefetch of invalid MR")
Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes a race of the form:
CPU0 CPU1
mlx5_ib_invalidate_range() mlx5_ib_invalidate_range()
// This one actually makes npages == 0
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
// This one does nothing
ib_umem_odp_unmap_dma_pages()
if (npages == 0 && !dying)
dying = 1;
dying = 1;
schedule_work(&umem_odp->work);
// Double schedule of the same work
schedule_work(&umem_odp->work); // BOOM
npages and dying must be read and written under the umem_mutex lock.
Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call
mlx5_ib_update_xlt, and both need to be done in the same locking region,
hoist the lock out of unmap.
This avoids an expensive double critical section in
mlx5_ib_invalidate_range().
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_update_xlt() must be protected against parallel free of the MR it
is accessing, also it must be called single threaded while updating the
HW. Otherwise we can have races of the form:
CPU0 CPU1
mlx5_ib_update_xlt()
mlx5_odp_populate_klm()
odp_lookup() == NULL
pklm = ZAP
implicit_mr_get_data()
implicit_mr_alloc()
<update interval tree>
mlx5_ib_update_xlt
mlx5_odp_populate_klm()
odp_lookup() != NULL
pklm = VALID
mlx5_ib_post_send_wait()
mlx5_ib_post_send_wait() // Replaces VALID with ZAP
This can be solved by putting both the SRCU and the umem_mutex lock around
every call to mlx5_ib_update_xlt(). This ensures that the content of the
interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr)
will not change while it is running, and thus the posted WRs to update the
KLM will always reflect the correct information.
The race above will resolve by either having CPU1 wait till CPU0 completes
the ZAP or CPU0 will run after the add and instead store VALID.
The pagefault path adding children already holds the umem_mutex and SRCU,
so the only missed lock is during MR destruction.
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This code is completely broken, the umem of a ODP MR simply cannot be
discarded without a lot more locking, nor can an ODP mkey be blithely
destroyed via destroy_mkey().
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_for_each_port is already incrementing the iterator's value it
receives therefore, after the first iteration the iterator is increased by
2 which eventually causing wrong queries and possible traces.
Fix the above by removing the old redundant incrementation that was used
before rdma_for_each_port() macro.
Cc: <stable@vger.kernel.org>
Fixes: ea1075edcb ("RDMA: Add and use rdma_for_each_port")
Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org
Signed-off-by: Mohamad Heib <mohamadh@mellanox.com>
Reviewed-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The addr variable in prom_free_prom_memory() has been unused since
commit 0df1007677 ("MIPS: fw: Record prom memory"), leading to a
compiler warning:
arch/mips/fw/arc/memory.c:163:16:
warning: unused variable 'addr' [-Wunused-variable]
Fix this by removing the unused variable.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 0df1007677 ("MIPS: fw: Record prom memory")
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Properly unwind QP counter rebinding in case of failure.
Trying to rebind the counter after unbiding it is not going to work
reliably, move the unbind to the end so it doesn't have to be unwound.
Fixes: b389327df9 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink")
Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
a nested hypervisor has always been busted on Broadwell and newer processors,
and that has finally been fixed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdlzTRAAoJEL/70l94x66DElcH/Rvhn5VQE/n2J+tKEXAICxQu
FqcTBJ5x2mp04aFe7xD3kWoKRJmz2lmHdw2ahFd4sqqLfGEFF/KW24ADI33vzLx/
UmT78O0Je3PX77TRnEXy+napbJny0iT6ikTAQKPbyQ151JlqlbPvatpDXXLPWQHv
jj6nKHCvMBrhV3kgaXO3cTFl8swX1hvR9lo9PcA2gRNt+HMN0heUmpfKughPoOes
JH+UNjsEr7MYlXYlIIc9o71EYH+kgPObwlLejy0ture+dvvZEJUJjZJE8H/XG5f2
ryXG9favaCOTAvaGf0R5Es+47A3crqUr6gHS0N28QKPn7x4hehIkKpA9dXQnWIw=
=1/LN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing. On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.
Resolve this by allocating the memory for a message off of the heap
instead of the stack. kmalloc() always will give us a proper memory
location that DMA will work correctly from.
Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXZbQhwAKCRCAXGG7T9hj
vh03AP9mOLNY8r16u6a+Iy0YVccTaeiQiquG6HgFVEGX2Ki38gD/Xf5u6bPRYBts
uSRL/eYDvtfU4YGGMjogn20Fdzhc5Ak=
=EkVp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
- a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some
cases, plus a follow-on cleanup series for that driver
- a patch for introducing non-blocking EFI callbacks in Xen's EFI
driver, plu a cleanup patch for Xen EFI handling merging the x86 and
ARM arch specific initialization into the Xen EFI driver
- a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning
up after a user process has died
- a fix for Xen on ARM after removal of ZONE_DMA
- a cleanup patch for avoiding build warnings for Xen on ARM
* tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix self-deadlock after killing user process
xen/efi: have a common runtime setup function
arm: xen: mm: use __GPF_DMA32 for arm64
xen/balloon: Clear PG_offline in balloon_retrieve()
xen/balloon: Mark pages PG_offline in balloon_append()
xen/balloon: Drop __balloon_append()
xen/balloon: Set pages PageOffline() in balloon_add_region()
ARM: xen: unexport HYPERVISOR_platform_op function
xen/efi: Set nonblocking callbacks
In the process of moving the debug counters sysfs entries, the commit
mentioned below eliminated the cm_infiniband sysfs directory.
This sysfs directory was tied to the cm_port object allocated in procedure
cm_add_one().
Before the commit below, this cm_port object was freed via a call to
kobject_put(port->kobj) in procedure cm_remove_port_fs().
Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated.
This, however, meant that kfree was never called for the cm_port buffers.
Fix this by adding explicit kfree(port) calls to functions cm_add_one()
and cm_remove_one().
Note: the kfree call in the first chunk below (in the cm_add_one error
flow) fixes an old, undetected memory leak.
Fixes: c87e65cfb9 ("RDMA/cm: Move debug counters to be under relevant IB device")
Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds