The Guest Information Block (GIB) links the GISA of all guests
that have adapter interrupts pending. These interrupts cannot be
delivered because all vcpus of these guests are currently in WAIT
state or have masked the respective Interruption Sub Class (ISC).
If enabled, a GIB alert is issued on the host to schedule these
guests to run suitable vcpus to consume the pending interruptions.
This mechanism allows to process adapter interrupts for currently
not running guests.
The GIB is created during host initialization and associated with
the Adapter Interruption Facility in case an Adapter Interruption
Virtualization Facility is available.
The GIB initialization and thus the activation of the related code
will be done in an upcoming patch of this series.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-10-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The vcpu idle_mask state is used by but not specific
to the emulated floating interruptions. The state is
relevant to gisa related interruptions as well.
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20190131085247.13826-4-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
VCPU requests and VCPU blocking right now don't take care of the vSIE
(as it was not necessary until now). But we want to have synchronous VCPU
requests that will also be handled before running the vSIE again.
So let's simulate a SIE entry of the VCPU when calling the sie during
vSIE handling and check for PROG_ flags. The existing infrastructure
(e.g. exit_sie()) will then detect that the SIE (in form of the vSIE) is
running and properly kick the vSIE CPU, resulting in it leaving the vSIE
loop and therefore the vSIE interception handler, allowing it to handle
VCPU requests.
E.g. if we want to modify the crycb of the VCPU and make sure that any
masks also get applied to the VSIE crycb shadow (which uses masks from the
VCPU crycb), we will need a way to hinder the vSIE from running and make
sure to process the updated crycb before reentering the vSIE again.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180925231641.4954-2-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces a new function to reset the crypto attributes for all
vcpus whether they are running or not. Each vcpu in KVM will
be removed from SIE prior to resetting the crypto attributes in its
SIE state description. After all vcpus have had their crypto attributes
reset the vcpus will be restored to SIE.
This function is incorporated into the kvm_s390_vm_set_crypto(kvm)
function to fix a reported issue whereby the crypto key wrapping
attributes could potentially get out of synch for running vcpus.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some facilities should only be provided to the guest, if they are
enabled by a CPU model. This allows us to avoid capabilities and
to simply fall back to the cpumodel for deciding about a facility
without enabling it for older QEMUs or QEMUs without a CPU
model.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.
Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea7 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Instead of having huge jump tables for function selection,
let's use normal switch/case statements for the instruction
handlers in intercept.c We can now also get rid of
intercept_handler_t.
This allows the compiler to make the right decision depending
on the situation (e.g. avoid jump-tables for thunks).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.
This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.
To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.
Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.
Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).
The code will be activated with a follow-up patch.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags().
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
No need to make this function special. Move it to a header right away.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
"wq" is not used at all. "cpuflags" can be access directly via the vcpu,
just as "float_int" via vcpu->kvm.
While at it, reuse _set_cpuflag() to make the code look nicer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180108193747.10818-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner. So the extra GPL
text wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As we need to support sthyi instruction on LPAR too, move the common code
to kernel part and kvm related code to intercept.c for better reuse.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Allow for the enablement of MEF and the support for the extended
epoch in SIE and VSIE for the extended guest TOD-Clock.
A new interface is used for getting/setting a guest's extended TOD-Clock
that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT. Since the
host time is a moving target that might see an epoch switch or STP sync
checks we need an atomic ioctl and cannot use the exisiting two
interfaces. The old method of getting and setting the guest TOD-Clock is
still retained and is used when the old ioctls are called.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the exit flag of SIE indicates that a machine check has happened
during guest's running and needs to be injected, inject it to the guest
accordingly.
But some machine checks, e.g. Channel Report Pending (CRW), refer to
host conditions only (the guest's channel devices are not managed by
the kernel directly) and are therefore not injected into the guest.
External Damage (ED) is also not reinjected into the guest because ETR
conditions are gone in Linux and STP conditions are not enabled in the
guest, and ED contains only these 8 ETR and STP conditions.
In general, instruction-processing damage, system recovery,
storage error, service-processor damage and channel subsystem damage
will be reinjected into the guest, and the remain (System damage,
timing-facility damage, warning, ED and CRW) will be handled on the host.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the KSS facility is available on the machine, we also make it
available for our KVM guests.
The KSS facility bypasses storage key management as long as the guest
does not issue a related instruction. When that happens, the control is
returned to the host, which has to turn off KSS for a guest vcpu
before retrying the instruction.
Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds guarded storage support for KVM guest. We need to
setup the necessary control blocks, the kvm_run structure for the
new registers, the necessary wrappers for VSIE, as well as the
machine check save areas.
GS is enabled lazily and the register saving and reloading is done in
KVM code. As this feature adds new content for migration, we provide
a new capability for enablement (KVM_CAP_S390_GS).
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's replace the bitmasks by defines. Reconstructed from code, comments
and commit messages.
Tried to keep the defines short and map them to feature names. In case
they don't completely map to features, keep them in the stye of ICTL
defines.
This effectively drops all "U" from the existing numbers. I think this
should be fine (as similarly done for e.g. ICTL defines).
I am not 100% sure about the ECA_MVPGI and ECA_PROTEXCI bits as they are
always used in pairs.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170313104828.13362-1-david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[some renames, add one missing place]
When we get a PER i-fetch event on an EXECUTE or EXECUTE RELATIVE LONG
instruction, because the executed instruction generated a PER i-fetch
event, then the PER address points at the EXECUTE function, not the
fetched one.
Therefore, when filtering PER events, we have to take care of the
really fetched instruction, which we can only get by reading in guest
virtual memory.
For icpt code 4 and 56, we directly have additional information about an
EXECUTE instruction at hand. For icpt code 8, we always have to read
in guest virtual memory.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[small fixes]
sparse with __CHECK_ENDIAN__ shows that ar_t was never properly
used across KVM on s390. We can now:
- fix all places
- do not make ar_t special
Since ar_t is just used as a register number (no endianness issues
for u8), and all other register numbers are also just plain int
variables, let's just use u8, which matches the __u8 in the userspace
ABI for the memop ioctl.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the SCA entries aren't used by the hardware (no SIGPIF), we
can simply not set the entries, stick to the basic sca and allow more
than 64 VCPUs.
To hinder any other facility from using these entries, let's properly
provoke intercepts by not setting the MCN and keeping the entries
unset.
This effectively allows when running KVM under KVM (vSIE) or under z/VM to
provide more than 64 VCPUs to a guest. Let's limit it to 255 for now, to
not run into problems if the CPU numbers are limited somewhere else.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Only enable runtime instrumentation if the guest issues an RI related
instruction or if userspace changes the riccb to a valid state.
This makes entry/exit a tiny bit faster.
Initial patch by Christian Borntraeger
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Vector registers are only to be stored if the facility is available
and if the guest has set up the machine check extended save area.
If anything goes wrong while writing the vector registers, the vector
registers are to be marked as invalid. Please note that we are allowed
to write the registers although they are marked as invalid.
Machine checks and "store status" SIGP orders are two different concepts,
let's correctly separate these. As the SIGP part is completely handled in
user space, we can drop it.
This patch is based on a patch from Cornelia Huck.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In case we have to emuluate an instruction or part of it (instruction,
partial instruction, operation exception), we have to inject a PER
instruction-fetching event for that instruction, if hardware told us to do
so.
In case we retry an instruction, we must not inject the PER event.
Please note that we don't filter the events properly yet, so guest
debugging will be visible for the guest.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As we want to make use of CPUSTAT_WAIT also when a VCPU is not idle but
to force interception of external calls, let's check in the bitmap instead.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever we want to wake up a VCPU (e.g. when injecting an IRQ), we
have to kick it out of vsie, so the request will be handled faster.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds basic support for nested virtualization on s390x, called
VSIE (virtual SIE) and allows it to be used by the guest if the necessary
facilities are supported by the hardware and enabled for the guest.
In order to make this work, we have to shadow the sie control block
provided by guest 2. In order to gain some performance, we have to
reuse the same shadow blocks as good as possible. For now, we allow
as many shadow blocks as we have VCPUs (that way, every VCPU can run the
VSIE concurrently).
We have to watch out for the prefix getting unmapped out of our shadow
gmap and properly get the VCPU out of VSIE in that case, to fault the
prefix pages back in. We use the PROG_REQUEST bit for that purpose.
This patch is based on an initial prototype by Tobias Elpelt.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For now, we only have an interface to query and configure facilities
indicated via STFL(E). However, we also have features indicated via
SCLP, that have to be indicated to the guest by user space and usually
require KVM support.
This patch allows user space to query and configure available cpu features
for the guest.
Please note that disabling a feature doesn't necessarily mean that it is
completely disabled (e.g. ESOP is mostly handled by the SIE). We will try
our best to disable it.
Most features (e.g. SCLP) can't directly be forwarded, as most of them need
in addition to hardware support, support in KVM. As we later on want to
turn these features in KVM explicitly on/off (to simulate different
behavior), we have to filter all features provided by the hardware and
make them configurable.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Store Hypervisor Information is an emulated z/VM instruction that
provides a guest with basic information about the layers it is running
on. This includes information about the cpu configuration of both the
machine and the lpar, as well as their names, machine model and
machine type. This information enables an application to determine the
maximum capacity of CPs and IFLs available to software.
The instruction is available whenever the facility bit 74 is set,
otherwise executing it results in an operation exception.
It is important to check the validity flags in the sections before
using data from any structure member. It is not guaranteed that all
members will be valid on all machines / machine configurations.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We can fit the 2k for the STFLE interpretation and the crypto
control block into one DMA page. As we now only have to allocate
one DMA page, we can clean up the code a bit.
As a nice side effect, this also fixes a problem with crycbd alignment in
case special allocation debug options are enabled, debugged by Sascha
Silbe.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The cpu timer is a mean to measure task execution time. We want
to account everything for a VCPU for which it is responsible. Therefore,
if the VCPU wants to sleep, it shall be accounted for it.
We can easily get this done by not disabling cpu timer accounting when
scheduled out while sleeping because of enabled wait.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We want to manually step the cpu timer in certain scenarios in the future.
Let's abstract any access to the cpu timer, so we can hide the complexity
internally.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We have some confusion about ilc vs. ilen in our current code. So let's
correctly use the term ilen when dealing with (ilc << 1).
Program irq injection didn't take care of the correct ilc in case of
irqs triggered by EXECUTE functions, let's provide one function
kvm_s390_get_ilen() to take care of all that.
Also, manually specifying in intercept handlers the size of the
instruction (and sometimes overwriting that value for EXECUTE internally)
doesn't make too much sense. So also provide the functions:
- kvm_s390_retry_instr to retry the currently intercepted instruction
- kvm_s390_rewind_psw to rewind the PSW without internal overwrites
- kvm_s390_forward_psw to forward the PSW
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds new structures and updates some existing ones to
provide the base for Extended SCA functionality.
The old sca_* structures were renamed to bsca_* to keep things uniform.
The access to fields of SIGP controls were turned into bitfields instead
of hardcoded bitmasks.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch generalizes access to the IPTE controls, which is a part of SCA.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's factor this out and always use get_tod_clock_fast() when
reading the guest TOD.
STORE CLOCK FAST does not do serialization and, therefore, might
result in some fuzziness between different processors in a way
that subsequent calls on different CPUs might have time stamps that
are earlier. This semantics is fine though for all KVM use cases.
To make it obvious that the new function has STORE CLOCK FAST
semantics we name it kvm_s390_get_tod_clock_fast.
With this patch, we only have a handful of places were we
have to care about STP sync (using preempt_disable() logic).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's move that whole logic into one function. We now always use unsigned
values when calculating the epoch (to avoid over/underflow defined).
Also, we always have to get all VCPUs out of SIE before doing the update
to avoid running differing VCPUs with different TODs.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The main reason to keep program injection in kernel separated until now
was that we were able to do some checking, if really only the owning
thread injects program interrupts (via waitqueue_active(li->wq)).
This BUG_ON was never triggered and the chances of really hitting it, if
another thread injected a program irq to another vcpu, were very small.
Let's drop this check and turn kvm_s390_inject_program_int() and
kvm_s390_inject_prog_irq() into simple inline functions that makes use of
kvm_s390_inject_vcpu().
__must_check can be dropped as they are implicitely given by
kvm_s390_inject_vcpu(), to avoid ugly long function prototypes.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In addition to the per VM debug logs, let's provide a global
one for KVM-wide events, like new guests or fatal errors.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
SPX (SET PREFIX) and SIGP (Set prefix) can change the prefix
register of a CPU. As sigp set prefix may be handled in user
space (KVM_CAP_S390_USER_SIGP), we would not log the changes
triggered via SIGP in that case. Let's have just one VCPU_EVENT
at the central location that tracks prefix changes.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
As we already only enable CMMA when userspace requests it, we can
safely move the additional checks to the request handler and avoid
doing them multiple times. This also tells userspace if CMMA is
available.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some updates to the control blocks need to be done in a way that
ensures that no CPU is within SIE. Provide wrappers around the
s390_vcpu_block functions and adopt the TOD migration code to
update in a guaranteed fashion. Also rename these functions to
have the kvm_s390_ prefix as everything else.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
exit_sie_sync is used to kick CPUs out of SIE and prevent reentering at
any point in time. This is used to reload the prefix pages and to
set the IBS stuff in a way that guarantees that after this function
returns we are no longer in SIE. All current users trigger KVM requests.
The request must be set before we block the CPUs to avoid races. Let's
make this implicit by adding the request into a new function
kvm_s390_sync_requests that replaces exit_sie_sync and split out
s390_vcpu_block and s390_vcpu_unblock, that can be used to keep
CPUs out of SIE independent of requests.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls
are added which get/set the complete status of pending interrupts in one
go. The ioctls are marked as available with the new capability
KVM_CAP_S390_IRQ_STATE.
We can not use a ONEREG, as the number of pending local interrupts is not
constant and depends on the number of CPUs.
To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE.
Its input parameter is a pointer to a struct kvm_s390_irq_state which
has a buffer and length. For all currently pending interrupts, we copy
a struct kvm_s390_irq into the buffer and pass it to userspace.
To store interrupt state into a buffer provided by userspace, we add an
ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into
the kernel and injects all interrupts contained in the buffer.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch makes interrupt handling compliant to the z/Architecture
Principles of Operation with regard to interrupt priorities.
Add a bitmap for pending floating interrupts. Each bit relates to a
interrupt type and its list. A turned on bit indicates that a list
contains items (interrupts) which need to be delivered. When delivering
interrupts on a cpu we can merge the existing bitmap for cpu-local
interrupts and floating interrupts and have a single mechanism for
delivery.
Currently we have one list for all kinds of floating interrupts and a
corresponding spin lock. This patch adds a separate list per
interrupt type. An exception to this are service signal and machine check
interrupts, as there can be only one pending interrupt at a time.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The patch represents capability KVM_CAP_S390_VECTOR_REGISTERS by means
of the SIMD facility bit. This allows to a) disable the use of SIMD when
used in conjunction with a not-SIMD-aware QEMU, b) to enable SIMD when
used with a SIMD-aware version of QEMU and c) finally by means of a QEMU
version using the future cpu model ioctls.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Tested-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In access register mode, the write_guest() read_guest() and other
functions will invoke the access register translation, which
requires an ar, designated by one of the instruction fields.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Michael Mueller