Implement worker states. After created, a worker is STARTED. While a
worker isn't processing a work, it's IDLE and chained on
gcwq->idle_list. While processing a work, a worker is BUSY and
chained on gcwq->busy_hash. Also, gcwq now counts the number of all
workers and idle ones.
worker_thread() is restructured to reflect state transitions.
cwq->more_work is removed and waking up a worker makes it check for
events. A worker is killed by setting DIE flag while it's IDLE and
waking it up.
This gives gcwq better visibility of what's going on and allows it to
find out whether a work is executing quickly which is necessary to
have multiple workers processing the same cwq.
Signed-off-by: Tejun Heo <tj@kernel.org>
There is one gcwq (global cwq) per each cpu and all cwqs on an cpu
point to it. A gcwq contains a lock to be used by all cwqs on the cpu
and an ida to give IDs to workers belonging to the cpu.
This patch introduces gcwq, moves worker_ida into gcwq and make all
cwqs on the same cpu use the cpu's gcwq->lock instead of separate
locks. gcwq->ida is now protected by gcwq->lock too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, workqueue freezing is implemented by marking the worker
freezeable and calling try_to_freeze() from dispatch loop.
Reimplement it using cwq->limit so that the workqueue is frozen
instead of the worker.
* workqueue_struct->saved_max_active is added which stores the
specified max_active on initialization.
* On freeze, all cwq->max_active's are quenched to zero. Freezing is
complete when nr_active on all cwqs reach zero.
* On thaw, all cwq->max_active's are restored to wq->saved_max_active
and the worklist is repopulated.
This new implementation allows having single shared pool of workers
per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add cwq->nr_active, cwq->max_active and cwq->delayed_work. nr_active
counts the number of active works per cwq. A work is active if it's
flushable (colored) and is on cwq's worklist. If nr_active reaches
max_active, new works are queued on cwq->delayed_work and activated
later as works on the cwq complete and decrement nr_active.
cwq->max_active can be specified via the new @max_active parameter to
__create_workqueue() and is set to 1 for all workqueues for now. As
each cwq has only single worker now, this double queueing doesn't
cause any behavior difference visible to its users.
This will be used to reimplement freeze/thaw and implement shared
worker pool.
Signed-off-by: Tejun Heo <tj@kernel.org>
A work is linked to the next one by having WORK_STRUCT_LINKED bit set
and these links can be chained. When a linked work is dispatched to a
worker, all linked works are dispatched to the worker's newly added
->scheduled queue and processed back-to-back.
Currently, as there's only single worker per cwq, having linked works
doesn't make any visible behavior difference. This change is to
prepare for multiple shared workers per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Separate out worker thread related information to struct worker from
struct cpu_workqueue_struct and implement helper functions to deal
with the new struct worker. The only change which is visible outside
is that now workqueue worker are all named "kworker/CPUID:WORKERID"
where WORKERID is allocated from per-cpu ida.
This is in preparation of concurrency managed workqueue where shared
multiple workers would be available per cpu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reimplement workqueue flushing using color coded works. wq has the
current work color which is painted on the works being issued via
cwqs. Flushing a workqueue is achieved by advancing the current work
colors of cwqs and waiting for all the works which have any of the
previous colors to drain.
Currently there are 16 possible colors, one is reserved for no color
and 15 colors are useable allowing 14 concurrent flushes. When color
space gets full, flush attempts are batched up and processed together
when color frees up, so even with many concurrent flushers, the new
implementation won't build up huge queue of flushers which has to be
processed one after another.
Only works which are queued via __queue_work() are colored. Works
which are directly put on queue using insert_work() use NO_COLOR and
don't participate in workqueue flushing. Currently only works used
for work-specific flush fall in this category.
This new implementation leaves only cleanup_workqueue_thread() as the
user of flush_cpu_workqueue(). Just make its users use
flush_workqueue() and kthread_stop() directly and kill
cleanup_workqueue_thread(). As workqueue flushing doesn't use barrier
request anymore, the comment describing the complex synchronization
around it in cleanup_workqueue_thread() is removed together with the
function.
This new implementation is to allow having and sharing multiple
workers per cpu.
Please note that one more bit is reserved for a future work flag by
this patch. This is to avoid shifting bits and updating comments
later.
Signed-off-by: Tejun Heo <tj@kernel.org>
work->data field is used for two purposes. It points to cwq it's
queued on and the lower bits are used for flags. Currently, two bits
are reserved which is always safe as 4 byte alignment is guaranteed on
every architecture. However, future changes will need more flag bits.
On SMP, the percpu allocator is capable of honoring larger alignment
(there are other users which depend on it) and larger alignment works
just fine. On UP, percpu allocator is a thin wrapper around
kzalloc/kfree() and don't honor alignment request.
This patch introduces WORK_STRUCT_FLAG_BITS and implements
alloc/free_cwqs() which guarantees max(1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long) alignment both on SMP and UP. On SMP,
simply wrapping percpu allocator is enough. On UP, extra space is
allocated so that cwq can be aligned and the original pointer can be
stored after it which is used in the free path.
* Alignment problem on UP is reported by Michal Simek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Worker management is about to be overhauled. Simplify things by
removing cpu_populated_map, creating workers for all possible cpus and
making single threaded workqueues behave more like multi threaded
ones.
After this patch, all cwqs are always initialized, all workqueues are
linked on the workqueues list and workers for all possibles cpus
always exist. This also makes CPU hotplug support simpler - checking
->cpus_allowed before processing works in worker_thread() and flushing
cwqs on CPU_POST_DEAD are enough.
While at it, make get_cwq() always return the cwq for the specified
cpu, add target_cwq() for cases where single thread distinction is
necessary and drop all direct usage of per_cpu_ptr() on wq->cpu_wq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Strip tracing code from workqueue and remove workqueue tracing. This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Work flags are about to see more traditional mask handling. Define
WORK_STRUCT_*_BIT as the bit position constant and redefine
WORK_STRUCT_* as bit masks. Also, make WORK_STRUCT_STATIC_* flags
conditional
While at it, re-define these constants as enums and use
WORK_STRUCT_STATIC instead of hard-coding 2 in
WORK_DATA_STATIC_INIT().
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, __create_workqueue_key() takes @singlethread and
@freezeable paramters and store them separately in workqueue_struct.
Merge them into a single flags parameter and field and use
WQ_FREEZEABLE and WQ_SINGLE_THREAD.
Signed-off-by: Tejun Heo <tj@kernel.org>
Make the following updates in preparation of concurrency managed
workqueue. None of these changes causes any visible behavior
difference.
* Add comments and adjust indentations to data structures and several
functions.
* Rename wq_per_cpu() to get_cwq() and swap the position of two
parameters for consistency. Convert a direct per_cpu_ptr() access
to wq->cpu_wq to get_cwq().
* Add work_static() and Update set_wq_data() such that it sets the
flags part to WORK_STRUCT_PENDING | WORK_STRUCT_STATIC if static |
@extra_flags.
* Move santiy check on work->entry emptiness from queue_work_on() to
__queue_work() which all queueing paths share.
* Make __queue_work() take @cpu and @wq instead of @cwq.
* Restructure flush_work() and __create_workqueue_key() to make them
easier to modify.
Signed-off-by: Tejun Heo <tj@kernel.org>
With stop_machine() converted to use cpu_stop, RT workqueue doesn't
have any user left. Kill RT workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement kthread_data() which takes @task pointing to a kthread and
returns @data specified when creating the kthread. The caller is
responsible for ensuring the validity of @task when calling this
function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement simple work processor for kthread. This is to ease using
kthread. Single thread workqueue used to be used for things like this
but workqueue won't guarantee fixed kthread association anymore to
enable worker sharing.
This can be used in cases where specific kthread association is
necessary, for example, when it should have RT priority or be assigned
to certain cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Because kprobes and syscalls need special processing to register
events, the class->reg() method was created to handle the differences.
But instead of creating a default ->reg for perf and ftrace events,
the code was scattered with:
if (class->reg)
class->reg();
else
default_reg();
This is messy and can also lead to bugs.
This patch cleans up this code and creates a default reg() entry for
the events allowing for the code to directly call the class->reg()
without the condition.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The nsecs_str string is a local variable defined as:
char nsecs_str[5];
It is possible for the snprintf call to use a size value larger than the
size of the string. This should not cause a buffer overrun as it is
written now due to the value for the string format "%03lu" can not be
larger than 1000. However, this change makes it correct. By making the
size correct we guard against potential future changes that could actually
cause a buffer overrun.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1276619355-18116-1-git-send-email-chase.douglas@canonical.com>
[ added 'UL' to number 8 to fix gcc warning comparing it to sizeof() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Let trace_module_add_events() and event_trace_init() call
__trace_add_event_call().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37E9.1020106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
raw_init callback is optional.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37D4.7070500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every event (or event class) has it's define_fields callback,
so the test is redundant.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37BC.8080707@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every event has the same common fields, so it's a big waste of
memory to have a copy of those fields for every event.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3759.30105@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All syscall exit events have the same fields.
The kernel size drops 2.5K:
text data bss dec hex filename
7018612 2034376 7251132 16304120 f8c7f8 vmlinux.o.orig
7018612 2031888 7251132 16301632 f8be40 vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3746.8070100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
GCC 4.4.1 on ARM has been observed to replace the while loop in
sched_avg_update with a call to uldivmod, resulting in the
following build failure at link-time:
kernel/built-in.o: In function `sched_avg_update':
kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
make: *** [.tmp_vmlinux1] Error 1
This patch introduces a fake data hazard to the loop body to
prevent the compiler optimising the loop away.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Freeing a perf event can happen in several ways. A task
calls perf_event_exit_task() right before exiting. This helper
will detach all the events from the task context and queue their
removal through free_event() if they are child tasks. The task
also loses its context reference there.
Releasing the breakpoint slot from the constraint table is made
from free_event() that calls release_bp_slot(). We count the number
of breakpoints this task is running by looking at the task's
perf_event_ctxp and iterating through its attached events.
But at this time, the reference to this context has been cleaned up
already.
So looking at the event->ctx instead of task->perf_event_ctxp
to count the remaining breakpoints should solve the problem.
At least it would for child breakpoints, but not for parent ones.
If the parent exits before the child, it will remove all its
events from the context but free_event() will be called later,
on fd release time. And checking the number of breakpoints the
task has attached to its context at this time is unreliable as all
events have been removed from the context.
To solve this, we keep track of the list of per task breakpoints.
On top of it, we maintain our array of numbers of breakpoints used
by the tasks. We use the context address as a task id.
So, instead of looking at the number of events attached to a context,
we walk through our list of per task breakpoints and count the number
of breakpoints that use the same ctx than the one to be reserved or
released from the constraint table, and update the count on top of this
result.
In the meantime it solves a bad refcounting, it also solves a warning,
reported by Paul.
Badness at /home/paulus/kernel/perf/kernel/hw_breakpoint.c:114
NIP: c0000000000cb470 LR: c0000000000cb46c CTR: c00000000032d9b8
REGS: c000000118e7b570 TRAP: 0700 Not tainted (2.6.35-rc3-perf-00008-g76b0f13
)
MSR: 9000000000029032 <EE,ME,CE,IR,DR> CR: 44004424 XER: 000fffff
TASK = c0000001187dcad0[3143] 'perf' THREAD: c000000118e78000 CPU: 1
GPR00: c0000000000cb46c c000000118e7b7f0 c0000000009866a0 0000000000000020
GPR04: 0000000000000000 000000000000001d 0000000000000000 0000000000000001
GPR08: c0000000009bed68 c00000000086dff8 c000000000a5bf10 0000000000000001
GPR12: 0000000024004422 c00000000ffff200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000018 00000000101150f4
GPR20: 0000000010206b40 0000000000000000 0000000000000000 00000000101150f4
GPR24: c0000001199090c0 0000000000000001 0000000000000000 0000000000000001
GPR28: 0000000000000000 0000000000000000 c0000000008ec290 0000000000000000
NIP [c0000000000cb470] .task_bp_pinned+0x5c/0x12c
LR [c0000000000cb46c] .task_bp_pinned+0x58/0x12c
Call Trace:
[c000000118e7b7f0] [c0000000000cb46c] .task_bp_pinned+0x58/0x12c (unreliable)
[c000000118e7b8a0] [c0000000000cb584] .toggle_bp_task_slot+0x44/0xe4
[c000000118e7b940] [c0000000000cb6c8] .toggle_bp_slot+0xa4/0x164
[c000000118e7b9f0] [c0000000000cbafc] .release_bp_slot+0x44/0x6c
[c000000118e7ba80] [c0000000000c4178] .bp_perf_event_destroy+0x10/0x24
[c000000118e7bb00] [c0000000000c4aec] .free_event+0x180/0x1bc
[c000000118e7bbc0] [c0000000000c54c4] .perf_event_release_kernel+0x14c/0x170
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Because cgroup_fork() is ran before sched_fork() [ from copy_process() ]
and the child's pid is not yet visible the child is pinned to its
cgroup. Therefore we can silence this warning.
A nicer solution would be moving cgroup_fork() to right after
dup_task_struct() and exclude PF_STARTING from task_subsys_state().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The task_group() function returns a pointer that must be protected
by either RCU, the ->alloc_lock, or the cgroup lock (see the
rcu_dereference_check() in task_subsys_state(), which is invoked by
task_group()). The wake_affine() function currently does none of these,
which means that a concurrent update would be within its rights to free
the structure returned by task_group(). Because wake_affine() uses this
structure only to compute load-balancing heuristics, there is no reason
to acquire either of the two locks.
Therefore, this commit introduces an RCU read-side critical section that
starts before the first call to task_group() and ends after the last use
of the "tg" pointer returned from task_group(). Thanks to Li Zefan for
pointing out the need to extend the RCU read-side critical section from
that proposed by the original patch.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Certain architectures (such as PowerPC) have a need to clean up data
structures before a breakpoint is unregistered. This introduces an
arch-specific hook in release_bp_slot() along with a weak definition
in the form of a stub function.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 3a101d05 (sched: adjust when cpu_active and cpuset
configurations are updated during cpu on/offlining) added
hotplug notifiers marked with __cpuexit; however, ia64 drops
text in __cpuexit during link unlike x86.
This means that functions which are referenced during init but used
only for cpu hot unplugging afterwards shouldn't be marked with
__cpuexit. Drop __cpuexit from those functions.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4C1FDF5B.1040301@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fastpath_timer_check()->thread_group_cputimer() is racy and
unneeded.
It is racy because another thread can clear ->running before
thread_group_cputimer() takes cputimer->lock. In this case
thread_group_cputimer() will set ->running = true again and call
thread_group_cputime(). But since we do not hold tasklist or
siglock, we can race with fork/exit and copy the wrong results
into cputimer->cputime.
It is unneeded because if ->running == true we can just use
the numbers in cputimer->cputime we already have.
Change fastpath_timer_check() to copy cputimer->cputime into
the local variable under cputimer->lock. We do not re-check
->running under cputimer->lock, run_posix_cpu_timers() does
this check later.
Note: we can add more optimizations on top of this change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100611180446.GA13025@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
run_posix_cpu_timers() doesn't work if current has already passed
exit_notify(). This was needed to prevent the races with do_wait().
Since ea6d290c ->signal is always valid and can't go away. We can
remove the "tsk->exit_state == 0" in fastpath_timer_check() and
convert run_posix_cpu_timers() to use lock_task_sighand().
Note: it makes sense to take group_leader's sighand instead, the
sub-thread still uses CPU after release_task(). But we need more
changes to do this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610231018.GA25942@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
thread_group_cputime() looks as if it is rcu-safe, but in fact this
was wrong until ea6d290c which pins task->signal to task_struct.
It checks ->sighand != NULL under rcu, but this can't help if ->signal
can go away. Fortunately the caller either holds ->siglock, or it is
fastpath_timer_check() which uses current and checks exit_state == 0.
- Since ea6d290c commit tsk->signal is stable, we can read it first
and avoid the initialization from INIT_CPUTIME.
- Even if tsk->signal is always valid, we still have to check it
is safe to use next_thread() under rcu_read_lock(). Currently
the code checks ->sighand != NULL, change it to use pid_alive()
which is commonly used to ensure the task wasn't unhashed before
we take rcu_read_lock().
Add the comment to explain this check.
- Change the main loop to use the while_each_thread() helper.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230956.GA25921@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
account_group_xxx() functions check ->exit_state to ensure that
current->signal is valid and can't go away. This is not needed
since ea6d290c, task->signal is pinned to task_struct.
The comment and another hack in account_group_exec_runtime() refers
to task_rq_unlock_wait() which was already removed by b7b8ff63.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230952.GA25914@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__sched_setscheduler() takes lock_task_sighand() to access task->signal.
This is not needed since ea6d290c, ->signal can't go away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230944.GA25903@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Docbook fails in sched_fair.c due to comments added in the asymmetric
packing patch series.
This fixes these errors. No code changes.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <24737.1276135581@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The CPU power test is the wrong way around in fix_small_capacity.
This was due to a small changes made in the posted patch on lkml to what
was was taken upstream.
This patch fixes asymmetric packing for POWER7.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <12629.1276124617@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit e70971591 ("sched: Optimize unused cgroup configuration") introduced
an imbalanced scheduling bug.
If we do not use CGROUP, function update_h_load won't update h_load. When the
system has a large number of tasks far more than logical CPU number, the
incorrect cfs_rq[cpu]->h_load value will cause load_balance() to pull too
many tasks to the local CPU from the busiest CPU. So the busiest CPU keeps
going in a round robin. That will hurt performance.
The issue was found originally by a scientific calculation workload that
developed by Yanmin. With that commit, the workload performance drops
about 40%.
CPU before after
00 : 2 : 7
01 : 1 : 7
02 : 11 : 6
03 : 12 : 7
04 : 6 : 6
05 : 11 : 7
06 : 10 : 6
07 : 12 : 7
08 : 11 : 6
09 : 12 : 6
10 : 1 : 6
11 : 1 : 6
12 : 6 : 6
13 : 2 : 6
14 : 2 : 6
15 : 1 : 6
Reviewed-by: Yanmin zhang <yanmin.zhang@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1276754893.9452.5442.camel@debian>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Chris Wedgwood reports that 39c0cbe (sched: Rate-limit nohz) causes a
serial console regression, unresponsiveness, and indeed it does. The
reason is that the nohz code is skipped even when the tick was already
stopped before the nohz_ratelimit(cpu) condition changed.
Move the nohz_ratelimit() check to the other conditions which prevent
long idle sleeps.
Reported-by: Chris Wedgwood <cw@f00f.org>
Tested-by: Brian Bloniarz <bmb@athenacr.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Jef Driesen <jefdriesen@telenet.be>
LKML-Reference: <1276790557.27822.516.camel@twins>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Define what happens when a we view a uid from one user_namespace
in another user_namepece.
- If the user namespaces are the same no mapping is necessary.
- For most cases of difference use overflowuid and overflowgid,
the uid and gid currently used for 16bit apis when we have a 32bit uid
that does fit in 16bits. Effectively the situation is the same,
we want to return a uid or gid that is not assigned to any user.
- For the case when we happen to be mapping the uid or gid of the
creator of the target user namespace use uid 0 and gid as confusing
that user with root is not a problem.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some recent uses of RCU make use of workqueues. In these uses, execution
within the context of a specific workqueue takes the place of the usual
RCU read-side primitives such as rcu_read_lock(), and flushing of workqueues
takes the place of the usual RCU grace-period primitives. Checking for
correct use of rcu_dereference() in such cases requires a test of whether
the code is executing in the context of a particular workqueue. This
commit adds an in_workqueue_context() function that provides this test.
This new function is only defined when lockdep is enabled, which allows
it to be used as the second argument of rcu_dereference_check().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Helps finding racy users of call_rcu(), which results in hangs because list
entries are overwritten and/or skipped.
Changelog since v4:
- Bissectability is now OK
- Now generate a WARN_ON_ONCE() for non-initialized rcu_head passed to
call_rcu(). Statically initialized objects are detected with
object_is_static().
- Rename rcu_head_init_on_stack to init_rcu_head_on_stack.
- Remove init_rcu_head() completely.
Changelog since v3:
- Include comments from Lai Jiangshan
This new patch version is based on the debugobjects with the newly introduced
"active state" tracker.
Non-initialized entries are all considered as "statically initialized". An
activation fixup (triggered by call_rcu()) takes care of performing the debug
object initialization without issuing any warning. Since we cannot increase the
size of struct rcu_head, I don't see much room to put an identifier for
statically initialized rcu_head structures. So for now, we have to live without
"activation without explicit init" detection. But the main purpose of this debug
option is to detect double-activations (double call_rcu() use of a rcu_head
before the callback is executed), which is correctly addressed here.
This also detects potential internal RCU callback corruption, which would cause
the callbacks to be executed twice.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
With the addition of the code to shrink the kernel tracepoint
infrastructure, we lost kprobes being traced by perf. The reason
is that I tested if the "tp_event->class->perf_probe" existed before
enabling it. This prevents "ftrace only" events (like the function
trace events) from being enabled by perf.
Unfortunately, kprobe events do not use perf_probe. This causes
kprobes to be missed by perf. To fix this, we add the test to
see if "tp_event->class->reg" exists as well as perf_probe.
Normal trace events have only "perf_probe" but no "reg" function,
and kprobes and syscalls have the "reg" but no "perf_probe".
The ftrace unique events do not have either, so this is a valid
test. If a kprobe or syscall is not to be probed by perf, the
"reg" function is called anyway, and will return a failure and
prevent perf from probing it.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix null pointer deref with SEND_SIG_FORCED
perf: Fix signed comparison in perf_adjust_period()
powerpc/oprofile: fix potential buffer overrun in op_model_cell.c
perf symbols: Set the DSO long name when using symbol_conf.vmlinux_name
Saving platform non-volatile state may be required for suspend to RAM as
well as hibernation. Move it to more generic code.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The set_type() function can change the chip implementation when the
trigger mode changes. That might result in using an non-initialized
irq chip when called from __setup_irq() or when called via
set_irq_type() on an already enabled irq.
The set_irq_type() function should not be called on an enabled irq,
but because we forgot to put a check into it, we have a bunch of users
which grew the habit of doing that and it never blew up as the
function is serialized via desc->lock against all users of desc->chip
and they never hit the non-initialized irq chip issue.
The easy fix for the __setup_irq() issue would be to move the
irq_chip_set_defaults(desc->chip) call after the trigger setting to
make sure that a chip change is covered.
But as we have already users, which do the type setting after
request_irq(), the safe fix for now is to call irq_chip_set_defaults()
from __irq_set_trigger() when desc->set_type() changed the irq chip.
It needs a deeper analysis whether we should refuse to change the chip
on an already enabled irq, but that'd be a large scale change to fix
all the existing users. So that's neither stable nor 2.6.35 material.
Reported-by: Esben Haabendal <eha@doredevelopment.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Cc: stable@kernel.org
Since now all modification to event->count (and ->prev_count
and ->period_left) are local to a cpu, change then to local64_t so we
avoid the LOCK'ed ops.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only child counters adding back their values into the parent counter
are responsible for cross-cpu updates to event->count.
So if we pull that out into a new child_count variable, we get an
event->count that is only modified locally.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a helper function for those sites that want to read the event count.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently there are perf_buffer_alloc() + perf_buffer_init() + some
separate bits, fold it all into a single perf_buffer_alloc() and only
leave the attachment to the event separate.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clarify some of the transactional group scheduling API details
and change it so that a successfull ->commit_txn also closes
the transaction.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274803086.5882.1752.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the capacility to track data mmap()s. This can be used together
with PERF_SAMPLE_ADDR for data profiling.
Signed-off-by: Anton Blanchard <anton@samba.org>
[Updated code for stable perf ABI]
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274193049-25997-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__DO_TRACE() already calls the callbacks under rcu_read_lock_sched(),
which is sufficient for our needs, avoid doing it again.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Inline perf_swevent_put_recursion_context into perf_tp_event(), this
shrinks the per trace template code footprint and saves a function
call.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check to see if the group is packed in a sched doman.
This is primarily intended to used at the sibling level. Some cores
like POWER7 prefer to use lower numbered SMT threads. In the case of
POWER7, it can move to lower SMT modes only when higher threads are
idle. When in lower SMT modes, the threads will perform better since
they share less core resources. Hence when we have idle threads, we
want them to be the higher ones.
This adds a hook into f_b_g() called check_asym_packing() to check the
packing. This packing function is run on idle threads. It checks to
see if the busiest CPU in this domain (core in the P7 case) has a
higher CPU number than what where the packing function is being run
on. If it is, calculate the imbalance and return the higher busier
thread as the busiest group to f_b_g(). Here we are assuming a lower
CPU number will be equivalent to a lower SMT thread number.
It also creates a new SD_ASYM_PACKING flag to enable this feature at
any scheduler domain level.
It also creates an arch hook to enable this feature at the sibling
level. The default function doesn't enable this feature.
Based heavily on patch from Peter Zijlstra.
Fixes from Srivatsa Vaddagiri.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100608045702.2936CCC897@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle cpu capacity being reported as 0 on cores with more number of
hardware threads. For example on a Power7 core with 4 hardware
threads, core power is 1177 and thus power of each hardware thread is
1177/4 = 294. This low power can lead to capacity for each hardware
thread being calculated as 0, which leads to tasks bouncing within the
core madly!
Fix this by reporting capacity for hardware threads as 1, provided
their power is not scaled down significantly because of frequency
scaling or real-time tasks usage of cpu.
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20100608045702.21D03CC895@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the new push model, all idle CPUs indeed go into nohz mode. There is
still the concept of idle load balancer (performing the load balancing
on behalf of all the idle cpu's in the system). Busy CPU kicks the nohz
balancer when any of the nohz CPUs need idle load balancing.
The kickee CPU does the idle load balancing on behalf of all idle CPUs
instead of the normal idle balance.
This addresses the below two problems with the current nohz ilb logic:
* the idle load balancer continued to have periodic ticks during idle and
wokeup frequently, even though it did not have any rebalancing to do on
behalf of any of the idle CPUs.
* On x86 and CPUs that have APIC timer stoppage on idle CPUs, this
periodic wakeup can result in a periodic additional interrupt on a CPU
doing the timer broadcast.
Also currently we are migrating the unpinned timers from an idle to the cpu
doing idle load balancing (when all the cpus in the system are idle,
there is no idle load balancing cpu and timers get added to the same idle cpu
where the request was made. So the existing optimization works only on semi idle
system).
And In semi idle system, we no longer have periodic ticks on the idle load
balancer CPU. Using that cpu will add more delays to the timers than intended
(as that cpu's timer base may not be uptodate wrt jiffies etc). This was
causing mysterious slowdowns during boot etc.
For now, in the semi idle case, use the nearest busy cpu for migrating timers
from an idle cpu. This is good for power-savings anyway.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1274486981.2840.46.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tickless idle has a negative side effect on update_cpu_load(), which
in turn can affect load balancing behavior.
update_cpu_load() is supposed to be called every tick, to keep track
of various load indicies. With tickless idle, there are no scheduler
ticks called on the idle CPUs. Idle CPUs may still do load balancing
(with idle_load_balance CPU) using the stale cpu_load. It will also
cause problems when all CPUs go idle for a while and become active
again. In this case loads would not degrade as expected.
This is how rq->nr_load_updates change looks like under different
conditions:
<cpu_num> <nr_load_updates change>
All CPUS idle for 10 seconds (HZ=1000)
0 1621
10 496
11 139
12 875
13 1672
14 12
15 21
1 1472
2 2426
3 1161
4 2108
5 1525
6 701
7 249
8 766
9 1967
One CPU busy rest idle for 10 seconds
0 10003
10 601
11 95
12 966
13 1597
14 114
15 98
1 3457
2 93
3 6679
4 1425
5 1479
6 595
7 193
8 633
9 1687
All CPUs busy for 10 seconds
0 10026
10 10026
11 10026
12 10026
13 10025
14 10025
15 10025
1 10026
2 10026
3 10026
4 10026
5 10026
6 10026
7 10026
8 10026
9 10026
That is update_cpu_load works properly only when all CPUs are busy.
If all are idle, all the CPUs get way lower updates. And when few
CPUs are busy and rest are idle, only busy and ilb CPU does proper
updates and rest of the idle CPUs will do lower updates.
The patch keeps track of when a last update was done and fixes up
the load avg based on current time.
On one of my test system SPECjbb with warehouse 1..numcpus, patch
improves throughput numbers by ~1% (average of 6 runs). On another
test system (with different domain hierarchy) there is no noticable
change in perf.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <AANLkTilLtDWQsAUrIxJ6s04WTgmw9GuOODc5AOrYsaR5@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Contrary to what 6d558c3a says, there is no need to reload
prev = rq->curr after the context switch. You always schedule
back to where you came from, prev must be equal to current
even if cpu/rq was changed.
- This also means reacquire_kernel_lock() can use prev instead
of current.
- No need to reassign switch_count if reacquire_kernel_lock()
reports need_resched(), we can just move the initial assignment
down, under the "need_resched_nonpreemptible:" label.
- Try to update the comment after context_switch().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100519125711.GA30199@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For people who otherwise get to write: cpu_clock(smp_processor_id()),
there is now: local_clock().
Also, as per suggestion from Andrew, provide some documentation on
the various clock interfaces, and minimize the unsigned long long vs
u64 mess.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
LKML-Reference: <1275052414.1645.52.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Drop this argument now that we always want to rewind only to the
state of the first caller.
It means frame pointers are not necessary anymore to reliably get
the source of an event. But this also means we need this helper
to be a macro now, as an inline function is not an option since
we need to know when to provide a default implentation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
arch/x86/include/asm/stacktrace.h and arch/x86/kernel/dumpstack.h
declare headers of objects that deal with the same topic.
Actually most of the files that include stacktrace.h also include
dumpstack.h
Although dumpstack.h seems more reserved for internals of stack
traces, those are quite often needed to define specialized stack
trace operations. And perf event arch headers are going to need
access to such low level operations anyway. So don't continue to
bother with dumpstack.h as it's not anymore about isolated deep
internals.
v2: fix struct stack_frame definition conflict in sysprof
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Soeren Sandmann <sandmann@daimi.au.dk>
Concurrency managed workqueue needs to know when workers are going to
sleep and waking up. Using these two hooks, cmwq keeps track of the
current concurrency level and throttles execution of new works if it's
too high and wakes up another worker from the sleep hook if it becomes
too low.
This patch introduces PF_WQ_WORKER to identify workqueue workers and
adds the following two hooks.
* wq_worker_waking_up(): called when a worker is woken up.
* wq_worker_sleeping(): called when a worker is going to sleep and may
return a pointer to a local task which should be woken up. The
returned task is woken up using try_to_wake_up_local() which is
simplified ttwu which is called under rq lock and can only wake up
local tasks.
Both hooks are currently defined as noop in kernel/workqueue_sched.h.
Later cmwq implementation will replace them with proper
implementation.
These hooks are hard coded as they'll always be enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Factor ttwu_activate() and ttwu_woken_up() out of try_to_wake_up().
The factoring out doesn't affect try_to_wake_up() much
code-generation-wise. Depending on configuration options, it ends up
generating the same object code as before or slightly different one
due to different register assignment.
This is to help future implementation of try_to_wake_up_local().
Mike Galbraith suggested rename to ttwu_post_activation() from
ttwu_woken_up() and comment update in try_to_wake_up().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Currently, when a cpu goes down, cpu_active is cleared before
CPU_DOWN_PREPARE starts and cpuset configuration is updated from a
default priority cpu notifier. When a cpu is coming up, it's set
before CPU_ONLINE but cpuset configuration again is updated from the
same cpu notifier.
For cpu notifiers, this presents an inconsistent state. Threads which
a CPU_DOWN_PREPARE notifier expects to be bound to the CPU can be
migrated to other cpus because the cpu is no more inactive.
Fix it by updating cpu_active in the highest priority cpu notifier and
cpuset configuration in the second highest when a cpu is coming up.
Down path is updated similarly. This guarantees that all other cpu
notifiers see consistent cpu_active and cpuset configuration.
cpuset_track_online_cpus() notifier is converted to
cpuset_update_active_cpus() which just updates the configuration and
now called from cpuset_cpu_[in]active() notifiers registered from
sched_init_smp(). If cpuset is disabled, cpuset_update_active_cpus()
degenerates into partition_sched_domains() making separate notifier
for !CONFIG_CPUSETS unnecessary.
This problem is triggered by cmwq. During CPU_DOWN_PREPARE, hotplug
callback creates a kthread and kthread_bind()s it to the target cpu,
and the thread is expected to run on that cpu.
* Ingo's test discovered __cpuinit/exit markups were incorrect.
Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Menage <menage@google.com>
Instead of hardcoding priority 10 and 20 in sched and perf, collect
them into CPU_PRI_* enums.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
PROVE_RCU has a few issues with the cpu_cgroup because the scheduler
typically holds rq->lock around the css rcu derefs but the generic
cgroup code doesn't (and can't) know about that lock.
Provide means to add extra checks to the css dereference and use that
in the scheduler to annotate its users.
The addition of rq->lock to these checks is correct because the
cgroup_subsys::attach() method takes the rq->lock for each task it
moves, therefore by holding that lock, we ensure the task is pinned to
the current cgroup and the RCU derefence is valid.
That leaves one genuine race in __sched_setscheduler() where we used
task_group() without holding any of the required locks and thus raced
with the cgroup code. Solve this by moving the check under the
appropriate lock.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic reported that frequency driven swevents didn't work properly
and even caused a division-by-zero error.
It turns out there are two bugs, the division-by-zero comes from a
failure to deal with that in perf_calculate_period().
The other was more interesting and turned out to be a wrong comparison
in perf_adjust_period(). The comparison was between an s64 and u64 and
got implicitly converted to an unsigned comparison. The problem is
that period_left is typically < 0, so it ended up being always true.
Cure this by making the local period variables s64.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: fix bne2 "gave up waiting for init of module libcrc32c"
module: verify_export_symbols under the lock
module: move find_module check to end
module: make locking more fine-grained.
module: Make module sysfs functions private.
module: move sysfs exposure to end of load_module
module: fix kdb's illicit use of struct module_use.
module: Make the 'usage' lists be two-way
Problem: it's hard to avoid an init routine stumbling over a
request_module these days. And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.
In this particular case, it's libcrc32c:
libcrc32c_mod_init
crypto_alloc_shash
crypto_alloc_tfm
crypto_find_alg
crypto_alg_mod_lookup
crypto_larval_lookup
request_module
If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.
Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock. Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.
Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
external user (the out-of-tree ksplice patches).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Abbot <tabbott@ksplice.com>
Tested-by: Brandon Philips <bphilips@suse.de>
It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.
So we check this just after we check for duplicate modules, and just
before we put the module in the global list.
(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).
Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.
In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Kay Sievers <kay.sievers@vrfy.org> reports that we still have some
contention over module loading which is slowing boot.
Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.
This is more ambitious: we only grab the lock where we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
These were placed in the header in ef665c1a06 to get the various
SYSFS/MODULE config combintations to compile.
That may have been necessary then, but it's not now. These functions
are all local to module.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.
This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus changed the structure, and luckily this didn't compile any more.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>
When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.
It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".
In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module. But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.
By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
block: make blk_init_free_list and elevator_init idempotent
block: avoid unconditionally freeing previously allocated request_queue
pipe: change /proc/sys/fs/pipe-max-pages to byte sized interface
pipe: change the privilege required for growing a pipe beyond system max
pipe: adjust minimum pipe size to 1 page
block: disable preemption before using sched_clock()
cciss: call BUG() earlier
Preparing 8.3.8rc2
drbd: Reduce verbosity
drbd: use drbd specific ratelimit instead of global printk_ratelimit
drbd: fix hang on local read errors while disconnected
drbd: Removed the now empty w_io_error() function
drbd: removed duplicated #includes
drbd: improve usage of MSG_MORE
drbd: need to set socket bufsize early to take effect
drbd: improve network latency, TCP_QUICKACK
drbd: Revert "drbd: Create new current UUID as late as possible"
brd: support discard
Revert "writeback: fix WB_SYNC_NONE writeback from umount"
Revert "writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync"
...
The commit 80b5184cc5 ("kernel/: convert cpu
notifier to return encapsulate errno value") changed the return value of
cpu notifier callbacks.
Those callbacks don't return NOTIFY_BAD on failures anymore. But there
are a few callbacks which are called directly at init time and checking
the return value.
I forgot to change BUG_ON checking by the direct callers in the commit.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Child groups should have a greater depth than their parents. Prior to
this change, the parent would incorrectly report zero memory usage for
child cgroups when use_hierarchy is enabled.
test script:
mount -t cgroup none /cgroups -o memory
cd /cgroups
mkdir cg1
echo 1 > cg1/memory.use_hierarchy
mkdir cg1/cg11
echo $$ > cg1/cg11/tasks
dd if=/dev/zero of=/tmp/foo bs=1M count=1
echo
echo CHILD
grep cache cg1/cg11/memory.stat
echo
echo PARENT
grep cache cg1/memory.stat
echo $$ > tasks
rmdir cg1/cg11 cg1
cd /
umount /cgroups
Using fae9c79, a recent patch that changed alloc_css_id() depth computation,
the parent incorrectly reports zero usage:
root@ubuntu:~# ./test
1+0 records in
1+0 records out
1048576 bytes (1.0 MB) copied, 0.0151844 s, 69.1 MB/s
CHILD
cache 1048576
total_cache 1048576
PARENT
cache 0
total_cache 0
With this patch, the parent correctly includes child usage:
root@ubuntu:~# ./test
1+0 records in
1+0 records out
1048576 bytes (1.0 MB) copied, 0.0136827 s, 76.6 MB/s
CHILD
cache 1052672
total_cache 1052672
PARENT
cache 0
total_cache 1052672
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: <stable@kernel.org> [2.6.34.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
task_struct->pesonality is "unsigned int", but sys_personality() paths use
"unsigned long pesonality". This means that every assignment or
comparison is not right. In particular, if this argument does not fit
into "unsigned int" __set_personality() changes the caller's personality
and then sys_personality() returns -EINVAL.
Turn this argument into "unsigned int" and avoid overflows. Obviously,
this is the user-visible change, we just ignore the upper bits. But this
can't break the sane application.
There is another thing which can confuse the poorly written applications.
User-space thinks that this syscall returns int, not long. This means
that the returned value can be negative and look like the error code. But
note that libc won't be confused and thus errno won't be set, and with
this patch the user-space can never get -1 unless sys_personality() really
fails. And, most importantly, the negative RET != -1 is only possible if
that app previously called personality(RET).
Pointed-out-by: Wenming Zhang <wezhang@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).
The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.
This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.
This bug would cause a missed preemption check and cause lower latencies.
Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer code uses ftrace_preempt_disable() to disable
preemption instead of normal preempt_disable(). But there's a slight
race condition that may cause it to lose a preemption check.
This was made to keep the function tracer from recursing on itself
by disabling preemption then having the enable call the function tracer
again, causing infinite recursion.
The bug was assumed to happen if the call was just in schedule, but
this is incorrect. The bug is caused by preempt_schedule() which
is called by preempt_enable(). The calling of preempt_enable() when
NEED_RESCHED was set would call preempt_schedule() which would call
the function tracer again.
By making the preempt_schedule() and add_preempt_count() notrace
then this will prevent the inifinite recursion. This is because
the add_preempt_count() would stop the preempt_enable() in the
function tracer from calling preempt_schedule() again.
The sub_preempt_count() is also made notrace just to keep it
symmetric.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched, trace: Fix sched_switch() prev_state argument
sched: Fix wake_affine() vs RT tasks
sched: Make sure timers have migrated before killing the migration_thread
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix crash in swevents
perf buildid-list: Fix --with-hits event processing
perf scripts python: Give field dict to unhandled callback
perf hist: fix objdump output parsing
perf-record: Check correct pid when forking
perf: Do the comm inheritance per thread in event__process_task
perf: Use event__process_task from perf sched
perf: Process comm events by tid
blktrace: Fix new kernel-doc warnings
perf_events: Fix unincremented buffer base on partial copy
perf_events: Fix event scheduling issues introduced by transactional API
perf_events, trace: Fix perf_trace_destroy(), mutex went missing
perf_events, trace: Fix probe unregister race
perf_events: Fix races in group composition
perf_events: Fix races and clean up perf_event and perf_mmap_data interaction
Frederic reported that because swevents handling doesn't disable IRQs
anymore, we can get a recursion of perf_adjust_period(), once from
overflow handling and once from the tick.
If both call ->disable, we get a double hlist_del_rcu() and trigger
a LIST_POISON2 dereference.
Since we don't actually need to stop/start a swevent to re-programm
the hardware (lack of hardware to program), simply nop out these
callbacks for the swevent pmu.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275557609.27810.35218.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes the interface to be based on bytes instead. The API
matches that of F_SETPIPE_SZ in that it rounds up the passed in
size so that the resulting page array is a power-of-2 in size.
The proc file is renamed to /proc/sys/fs/pipe-max-size to
reflect this change.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
MAX_SEQ_NR is used in padata_alloc_pd() like this:
pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1;
It needs parenthesis or the divide by num_cpus takes precedence over the
subtraction.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain. As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).
Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit. In the meantime, this patch silences the warning
the trivial way.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
kbuild: Revert part of e8d400a to resolve a conflict
kbuild: Fix checking of scm-identifier variable
gconfig: add support to show hidden options that have prompts
menuconfig: add support to show hidden options which have prompts
gconfig: remove show_debug option
gconfig: remove dbg_print_ptype() and dbg_print_stype()
kconfig: fix zconfdump()
kconfig: some small fixes
add random binaries to .gitignore
kbuild: Include gen_initramfs_list.sh and the file list in the .d file
kconfig: recalc symbol value before showing search results
.gitignore: ignore *.lzo files
headerdep: perlcritic warning
scripts/Makefile.lib: Align the output of LZO
kbuild: Generate modules.builtin in make modules_install
Revert "kbuild: specify absolute paths for cscope"
kbuild: Do not unnecessarily regenerate modules.builtin
headers_install: use local file handles
headers_check: fix perl warnings
export_report: fix perl warnings
...
Mike reports that since e9e9250b (sched: Scale down cpu_power due to RT
tasks), wake_affine() goes funny on RT tasks due to them still having a
!0 weight and wake_affine() still subtracts that from the rq weight.
Since nobody should be using se->weight for RT tasks, set the value to
zero. Also, since we now use ->cpu_power to normalize rq weights to
account for RT cpu usage, add that factor into the imbalance computation.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1275316109.27810.22969.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rafael sees a sometimes crash at precpu_modfree from kernel/module.c; it
only occurred with another (since-reverted) patch, but that patch simply
changed timing to uncover this bug, it was otherwise unrelated.
The comment about the mod being freed is self-explanatory, but neither
Tejun nor I read it. This bug was introduced in 259354deaa, after it
had previously been fixed in 6e2b75740b. How embarrassing.
Reported-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Embarrassingly-Acked-by: Tejun Heo <tj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix blktrace.c kernel-doc warnings:
Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore'
Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a sample size crosses to the next page boundary, the copy
will be made in more than one step. However we forget to advance
the source offset for the next copy, leading to unexpected double
copies that completely mess up the traces.
This fixes various kinds of bad traces that have irrelevant
data inside, as an example:
geany-4979 [001] 5758.077775: sched_switch: prev_comm=! prev_pid=121
prev_prio=0 prev_state=S|D|Z|X|x ==> next_comm= next_pid=7497072
next_prio=0
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274988898-5639-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The transactional API patch between the generic and model-specific
code introduced several important bugs with event scheduling, at
least on X86. If you had pinned events, e.g., watchdog, and were
over-committing the PMU, you would get bogus counts. The bug was
showing up on Intel CPU because events would move around more
often that on AMD. But the problem also existed on AMD, though
harder to expose.
The issues were:
- group_sched_in() was missing a cancel_txn() in the error path
- cpuc->n_added was not properly maintained, leading to missing
actions in hw_perf_enable(), i.e., n_running being 0. You cannot
update n_added until you know the transaction has succeeded. In
case of failed transaction n_added was not adjusted back.
- in case of failed transactions, event_sched_out() was called
and eventually invoked x86_disable_event() to touch the HW reg.
But with transactions, on X86, event_sched_in() does not touch
HW registers, it simply collects events into a list. Thus, you
could end up calling x86_disable_event() on a counter which
did not correspond to the current event when idx != -1.
The patch modifies the generic and X86 code to avoid all those problems.
First, we keep track of the number of events added last. In case the
transaction fails, we substract them from n_added. This approach is
necessary (as opposed to delaying updates to n_added) because not all
event updates use the transaction API, e.g., single events.
Second, we encapsulate the event_sched_in() and event_sched_out() in
group_sched_in() inside the transaction. That makes the operations
symmetrical and you can also detect that you are inside a transaction
and skip the HW reg access by checking cpuc->group_flag.
With this patch, you can now overcommit the PMU even with pinned
system-wide events present and still get valid counts.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274796225.5882.1389.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steve spotted I forgot to do the destroy under event_mutex.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274451913.1674.1707.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.
Also, use this_cpu_ptr() where possible.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Group siblings don't pin each-other or the parent, so when we destroy
events we must make sure to clean up all cross referencing pointers.
In particular, for destruction of a group leader we must be able to
find all its siblings and remove their reference to it.
This means that detaching an event from its context must not detach it
from the group, otherwise we can end up failing to clear all pointers.
Solve this by clearly separating the attachment to a context and
attachment to a group, and keep the group composed until we destroy
the events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to move toward separate buffer objects, rework the whole
perf_mmap_data construct to be a more self-sufficient entity, one
with its own lifetime rules.
This greatly sanitizes the whole output redirection code, which
was riddled with bugs and races.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Problem: In a stress test where some heavy tests were running along with
regular CPU offlining and onlining, a hang was observed. The system seems
to be hung at a point where migration_call() tries to kill the
migration_thread of the dying CPU, which just got moved to the current
CPU. This migration thread does not get a chance to run (and die) since
rt_throttled is set to 1 on current, and it doesn't get cleared as the
hrtimer which is supposed to reset the rt bandwidth
(sched_rt_period_timer) is tied to the CPU which we just marked dead!
Solution: This patch pushes the killing of migration thread to
"CPU_POST_DEAD" event. By then all the timers (including
sched_rt_period_timer) should have got migrated (along with other
callbacks).
Signed-off-by: Amit Arora <aarora@in.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20100525132346.GA14986@amitarora.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
If there's only one CPU online when disable_nonboot_cpus() is called,
the error variable will not be initialized and that may lead to
erroneous behavior. Fix this issue by initializing error in
disable_nonboot_cpus() as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 0ac0c0d0f8, which
caused cross-architecture build problems for all the wrong reasons.
IA64 already added its own version of __node_random(), but the fact is,
there is nothing architectural about the function, and the original
commit was just badly done. Revert it, since no fix is forthcoming.
Requested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: clean up on forwarded aborted mds request
ceph: fix leak of osd authorizer
ceph: close out mds, osd connections before stopping auth
ceph: make lease code DN specific
fs/ceph: Use ERR_CAST
ceph: renew auth tickets before they expire
ceph: do not resend mon requests on auth ticket renewal
ceph: removed duplicated #includes
ceph: avoid possible null dereference
ceph: make mds requests killable, not interruptible
sched: add wait_for_completion_killable_timeout
Add missing _killable_timeout variant for wait_for_completion that will
return when a timeout expires or the task is killed.
CC: Ingo Molnar <mingo@elte.hu>
CC: Andreas Herrmann <andreas.herrmann3@amd.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Sage Weil <sage@newdream.net>
once anon_inode_getfd() is called, you can't expect *anything* about
struct file that descriptor points to - another thread might be doing
whatever it likes with descriptor table at that point.
Cc: stable <stable@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
tracing: Add __used annotation to event variable
perf, trace: Fix !x86 build bug
perf report: Support multiple events on the TUI
perf annotate: Fix up usage of the build id cache
x86/mmiotrace: Remove redundant instruction prefix checks
perf annotate: Add TUI interface
perf tui: Remove annotate from popup menu after failure
perf report: Don't start the TUI if -D is used
perf: Fix getline undeclared
perf: Optimize perf_tp_event_match()
perf: Remove more code from the fastpath
perf: Optimize the !vmalloc backed buffer
perf: Optimize perf_output_copy()
perf: Fix wakeup storm for RO mmap()s
perf-record: Share per-cpu buffers
perf-record: Remove -M
perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
...
Move CLOCK_DISPATCH(which_clock, timer_create, (new_timer)) after all
posible EFAULT erros.
*_timer_create may allocate/get resources.
(for example posix_cpu_timer_create does get_task_struct)
[ tglx: fold the remove crappy comment patch into this ]
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: <stable@kernel.org>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") also introduced this annoying
warning:
kernel/cpu.c:157: warning: 'cpu_notify_nofail' defined but not used
when CONFIG_HOTPLUG_CPU wasn't set.
So move that helper inside the #ifdef CONFIG_HOTPLUG_CPU region, and
simplify it while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In kernel profiling requires that we be able to allocate "local" memory
for each cpu. Use "cpu_to_mem()" instead of "cpu_to_node()" to support
memoryless nodes.
Depends on the "numa_mem_id()" patch.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most distros turn the console verbosity down and that means a backtrace
after a panic never makes it to the console. I assume we haven't seen
this because a panic is often preceeded by an oops which will have called
console_verbose. There are however a lot of places we call panic
directly, and they are broken.
Use console_verbose like we do in the oops path to ensure a directly
called panic will print a backtrace.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
copy_process(pid => &init_struct_pid) doesn't do attach_pid/etc.
It shouldn't, but this means that the idle threads run with the wrong
pids copied from the caller's task_struct. In x86 case the caller is
either kernel_init() thread or keventd.
In particular, this means that after the series of cpu_up/cpu_down an
idle thread (which never exits) can run with .pid pointing to nowhere.
Change fork_idle() to initialize idle->pids[] correctly. We only set
.pid = &init_struct_pid but do not add .node to list, INIT_TASK() does
the same for the boot-cpu idle thread (swapper).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Mathias Krause <Mathias.Krause@secunet.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On a system with a substantial number of processors, the early default
pid_max of 32k will not be enough. A system with 1664 CPU's, there are
25163 processes started before the login prompt. It's estimated that with
2048 CPU's we will pass the 32k limit. With 4096, we'll reach that limit
very early during the boot cycle, and processes would stall waiting for an
available pid.
This patch increases the early maximum number of pids available, and
increases the minimum number of pids that can be set during runtime.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <gregkh@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: John Stoffel <john@stoffel.org>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since when CONFIG_HOTPLUG_CPU=n, get_online_cpus() do nothing, so we don't
need cpu_hotplug_begin() either.
This patch moves cpu_hotplug_begin()/cpu_hotplug_done() into the code
block of CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By the previous modification, the cpu notifier can return encapsulate
errno value. This converts the cpu notifiers for kernel/*.c
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, onlining or offlining a CPU failure by one of the cpu notifiers
error always cause -EINVAL error. (i.e. writing 0 or 1 to
/sys/devices/system/cpu/cpuX/online gets EINVAL)
To get better error reporting rather than always getting -EINVAL, This
changes cpu_notify() to return -errno value with notifier_to_errno() and
fix the callers. Now that cpu notifiers can return encapsulate errno
value.
Currently, all cpu hotplug notifiers return NOTIFY_OK, NOTIFY_BAD, or
NOTIFY_DONE. So cpu_notify() can returns 0 or -EPERM with this change for
now.
(notifier_to_errno(NOTIFY_OK) == 0, notifier_to_errno(NOTIFY_DONE) == 0,
notifier_to_errno(NOTIFY_BAD) == -EPERM)
Forthcoming patches convert several cpu notifiers to return encapsulate
errno value with notifier_from_errno().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional change. These are just wrappers of
raw_cpu_notifier_call_chain.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional changes, just s/atomic_t count/int nr_threads/.
With the recent changes this counter has a single user, get_nr_threads()
And, none of its callers need the really accurate number of threads, not
to mention each caller obviously races with fork/exit. It is only used to
report this value to the user-space, except first_tid() uses it to avoid
the unnecessary while_each_thread() loop in the unlikely case.
It is a bit sad we need a word in struct signal_struct for this, perhaps
we can change get_nr_threads() to approximate the number of threads using
signal->live and kill ->nr_threads later.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial, use get_nr_threads() helper to read signal->count which we are
going to change.
Like other callers, proc_sched_show_task() doesn't need the exactly
precise nr_threads.
David said:
: Note that get_nr_threads() isn't completely equivalent (it can return 0
: where proc_sched_show_task() will display a 1). But I don't think this
: should be a problem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check_unshare_flags(CLONE_SIGHAND) adds CLONE_THREAD to *flags_ptr if the
task is multithreaded to ensure unshare_thread() will fail.
Not only this is a bit strange way to return the error, this is absolutely
meaningless. If signal->count > 1 then sighand->count must be also > 1,
and unshare_sighand() will fail anyway.
In fact, all CLONE_THREAD/SIGHAND/VM checks inside sys_unshare() do not
look right. Fortunately this code doesn't really work anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move taskstats_tgid_free() from __exit_signal() to free_signal_struct().
This way signal->stats never points to nowhere and we can read ->stats
lockless.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kill the empty thread_group_cputime_free() helper. It was needed to free
the per-cpu data which we no longer have.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup:
- Add the boolean, group_dead = thread_group_leader(), for clarity.
- Do not test/set sig == NULL to detect the all-dead case, use this
boolean.
- Pass this boolen to __unhash_process() and use it instead of another
thread_group_leader() call which needs ->group_leader.
This can be considered as microoptimization, but hopefully this also
allows us do do other cleanups later.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that task->signal can't go away we can revert the horrible hack added
by ad474caca3 ("fix for
account_group_exec_runtime(), make sure ->signal can't be freed under
rq->lock").
And we can do more cleanups sched_stats.h/posix-cpu-timers.c later.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the last thread exits signal->tty is freed, but the pointer is not
cleared and points to nowhere.
This is OK. Nobody should use signal->tty lockless, and it is no longer
possible to take ->siglock. However this looks wrong even if correct, and
the nice OOPS is better than subtle and hard to find bugs.
Change __exit_signal() to clear signal->tty under ->siglock.
Note: __exit_signal() needs more cleanups. It should not check "sig !=
NULL" to detect the all-dead case and we have the same issues with
signal->stats.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have a lot of problems with accessing task_struct->signal, it can
"disappear" at any moment. Even current can't use its ->signal safely
after exit_notify(). ->siglock helps, but it is not convenient, not
always possible, and sometimes it makes sense to use task->signal even
after this task has already dead.
This patch adds the reference counter, sigcnt, into signal_struct. This
reference is owned by task_struct and it is dropped in
__put_task_struct(). Perhaps it makes sense to export
get/put_signal_struct() later, but currently I don't see the immediate
reason.
Rename __cleanup_signal() to free_signal_struct() and unexport it. With
the previous changes it does nothing except kmem_cache_free().
Change __exit_signal() to not clear/free ->signal, it will be freed when
the last reference to any thread in the thread group goes away.
Note:
- when the last thead exits signal->tty can point to nowhere, see
the next patch.
- with or without this patch signal_struct->count should go away,
or at least it should be "int nr_threads" for fs/proc. This will
be addressed later.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tty_kref_put() has two callsites in copy_process() paths,
1. if copy_process() suceeds it is called before we copy
signal->tty from parent
2. otherwise it is called from __cleanup_signal() under
bad_fork_cleanup_signal: label
In both cases tty_kref_put() is not right and unneeded because we don't
have the balancing tty_kref_get(). Fortunately, this is harmless because
this can only happen without CLONE_THREAD, and in this case signal->tty
must be NULL.
Remove tty_kref_put() from copy_process() and __cleanup_signal(), and
change another caller of __cleanup_signal(), __exit_signal(), to call
tty_kref_put() by hand.
I hope this change makes sense by itself, but it is also needed to make
->signal refcountable.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preparation to make task->signal immutable, no functional changes.
posix-cpu-timers.c checks task->signal != NULL to ensure this task is
alive and didn't pass __exit_signal(). This is correct but we are going
to change the lifetime rules for ->signal and never reset this pointer.
Change the code to check ->sighand instead, it doesn't matter which
pointer we check under tasklist, they both are cleared simultaneously.
As Roland pointed out, some of these changes are not strictly needed and
probably it makes sense to revert them later, when ->signal will be pinned
to task_struct. But this patch tries to ensure the subsequent changes in
fork/exit can't make any visible impact on posix cpu timers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change __exit_signal() to check thread_group_leader() instead of
atomic_dec_and_test(&sig->count). This must be equivalent, the group
leader must be released only after all other threads have exited and
passed __exit_signal().
Henceforth sig->count is not actually used, except in fs/proc for
get_nr_threads/etc.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
de_thread() and __exit_signal() use signal_struct->count/notify_count for
synchronization. We can simplify the code and use ->notify_count only.
Instead of comparing these two counters, we can change de_thread() to set
->notify_count = nr_of_sub_threads, then change __exit_signal() to
dec-and-test this counter and notify group_exit_task.
Note that __exit_signal() checks "notify_count > 0" just for symmetry with
exit_notify(), we could just check it is != 0.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change zap_other_threads() to return the number of other sub-threads found
on ->thread_group list.
Other changes are cosmetic:
- change the code to use while_each_thread() helper
- remove the obsolete comment about SIGKILL/SIGSTOP
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
signal_struct->count in its current form must die.
- it has no reasons to be atomic_t
- it looks like a reference counter, but it is not
- otoh, we really need to make task->signal refcountable, just look at
the extremely ugly task_rq_unlock_wait() called from __exit_signals().
- we should change the lifetime rules for task->signal, it should be
pinned to task_struct. We have a lot of code which can be simplified
after that.
- it is not needed! while the code is correct, any usage of this
counter is artificial, except fs/proc uses it correctly to show the
number of threads.
This series removes the usage of sig->count from exit pathes.
This patch:
Now that Veaceslav changed copy_signal() to use zalloc(), exit_notify()
can just check notify_count < 0 to ensure the execing sub-threads needs
the notification from us. No need to do other checks, notify_count != 0
must always mean ->group_exit_task != NULL is waiting for us.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UMH_WAIT_EXEC should report the error if kernel_thread() fails, like
UMH_WAIT_PROC does.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__call_usermodehelper(UMH_NO_WAIT) has 2 problems:
- if kernel_thread() fails, call_usermodehelper_freeinfo()
is not called.
- for unknown reason UMH_NO_WAIT has UMH_WAIT_PROC logic,
we spawn yet another thread which waits until the user
mode application exits.
Change the UMH_NO_WAIT code to use ____call_usermodehelper() instead of
wait_for_helper(), and do call_usermodehelper_freeinfo() unconditionally.
We can rely on CLONE_VFORK, do_fork(CLONE_VFORK) until the child exits or
execs.
With or without this patch UMH_NO_WAIT does not report the error if
kernel_thread() fails, this is correct since the caller doesn't wait for
result.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. wait_for_helper() calls allow_signal(SIGCHLD) to ensure the child
can't autoreap itself.
However, this means that a spurious SIGCHILD from user-space can
set TIF_SIGPENDING and:
- kernel_thread() or sys_wait4() can fail due to signal_pending()
- worse, wait4() can fail before ____call_usermodehelper() execs
or exits. In this case the caller may kfree(subprocess_info)
while the child still uses this memory.
Change the code to use SIG_DFL instead of magic "(void __user *)2"
set by allow_signal(). This means that SIGCHLD won't be delivered,
yet the child won't autoreap itsefl.
The problem is minor, only root can send a signal to this kthread.
2. If sys_wait4(&ret) fails it doesn't populate "ret", in this case
wait_for_helper() reports a random value from uninitialized var.
With this patch sys_wait4() should never fail, but still it makes
sense to initialize ret = -ECHILD so that the caller can notice
the problem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
____call_usermodehelper() correctly calls flush_signal_handlers() to set
SIG_DFL, but sigemptyset(->blocked) and recalc_sigpending() are not
needed.
This kthread was forked by workqueue thread, all signals must be unblocked
and ignored, no pending signal is possible.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that nobody ever changes subprocess_info->cred we can kill this member
and related code. ____call_usermodehelper() always runs in the context of
freshly forked kernel thread, it has the proper ->cred copied from its
parent kthread, keventd.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
call_usermodehelper_keys() uses call_usermodehelper_setkeys() to change
subprocess_info->cred in advance. Now that we have info->init() we can
change this code to set tgcred->session_keyring in context of execing
kernel thread.
Note: since currently call_usermodehelper_keys() is never called with
UMH_NO_WAIT, call_usermodehelper_keys()->key_get() and umh_keys_cleanup()
are not really needed, we could rely on install_session_keyring_to_cred()
which does key_get() on success.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The first patch in this series introduced an init function to the
call_usermodehelper api so that processes could be customized by caller.
This patch takes advantage of that fact, by customizing the helper in
do_coredump to create the pipe and set its core limit to one (for our
recusrsion check). This lets us clean up the previous uglyness in the
usermodehelper internals and factor call_usermodehelper out entirely.
While I'm at it, we can also modify the helper setup to look for a core
limit value of 1 rather than zero for our recursion check
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
About 6 months ago, I made a set of changes to how the core-dump-to-a-pipe
feature in the kernel works. We had reports of several races, including
some reports of apps bypassing our recursion check so that a process that
was forked as part of a core_pattern setup could infinitely crash and
refork until the system crashed.
We fixed those by improving our recursion checks. The new check basically
refuses to fork a process if its core limit is zero, which works well.
Unfortunately, I've been getting grief from maintainer of user space
programs that are inserted as the forked process of core_pattern. They
contend that in order for their programs (such as abrt and apport) to
work, all the running processes in a system must have their core limits
set to a non-zero value, to which I say 'yes'. I did this by design, and
think thats the right way to do things.
But I've been asked to ease this burden on user space enough times that I
thought I would take a look at it. The first suggestion was to make the
recursion check fail on a non-zero 'special' number, like one. That way
the core collector process could set its core size ulimit to 1, and enable
the kernel's recursion detection. This isn't a bad idea on the surface,
but I don't like it since its opt-in, in that if a program like abrt or
apport has a bug and fails to set such a core limit, we're left with a
recursively crashing system again.
So I've come up with this. What I've done is modify the
call_usermodehelper api such that an extra parameter is added, a function
pointer which will be called by the user helper task, after it forks, but
before it exec's the required process. This will give the caller the
opportunity to get a call back in the processes context, allowing it to do
whatever it needs to to the process in the kernel prior to exec-ing the
user space code. In the case of do_coredump, this callback is ues to set
the core ulimit of the helper process to 1. This elimnates the opt-in
problem that I had above, as it allows the ulimit for core sizes to be set
to the value of 1, which is what the recursion check looks for in
do_coredump.
This patch:
Create new function call_usermodehelper_fns() and allow it to assign both
an init and cleanup function, as we'll as arbitrary data.
The init function is called from the context of the forked process and
allows for customization of the helper process prior to calling exec. Its
return code gates the continuation of the process, or causes its exit.
Also add an arbitrary data pointer to the subprocess_info struct allowing
for data to be passed from the caller to the new process, and the
subsequent cleanup process
Also, use this patch to cleanup the cleanup function. It currently takes
an argp and envp pointer for freeing, which is ugly. Lets instead just
make the subprocess_info structure public, and pass that to the cleanup
and init routines
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Tridgell reports that aio_read(SIGEV_SIGNAL) can fail if the
notification from the helper thread races with setresuid(), see
http://samba.org/~tridge/junkcode/aio_uid.c
This happens because check_kill_permission() doesn't permit sending a
signal to the task with the different cred->xids. But there is not any
security reason to check ->cred's when the task sends a signal (private or
group-wide) to its sub-thread. Whatever we do, any thread can bypass all
security checks and send SIGKILL to all threads, or it can block a signal
SIG and do kill(gettid(), SIG) to deliver this signal to another
sub-thread. Not to mention that CLONE_THREAD implies CLONE_VM.
Change check_kill_permission() to avoid the credentials check when the
sender and the target are from the same thread group.
Also, move "cred = current_cred()" down to avoid calling get_current()
twice.
Note: David Howells pointed out we could relax this even more, the
CLONE_SIGHAND (without CLONE_THREAD) case probably does not need
these checks too.
Roland said:
: The glibc (libpthread) that does set*id across threads has
: been in use for a while (2.3.4?), probably in distro's using kernels as old
: or older than any active -stable streams. In the race in question, this
: kernel bug is breaking valid POSIX application expectations.
Reported-by: Andrew Tridgell <tridge@samba.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: <stable@kernel.org> [all kernel versions]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that Mike Frysinger unified the FDPIC ptrace code, we can fix the
unsafe usage of child->mm in ptrace_request(PTRACE_GETFDPIC).
We have the reference to task_struct, and ptrace_check_attach() verified
the tracee is stopped. But nothing can protect from SIGKILL after that,
we must not assume child->mm != NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@snapgear.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in
their arch handlers (since they were probably copied & pasted). Since
these ptrace interfaces are an arch independent aspect of the FDPIC code,
unify them in the common ptrace code so new FDPIC ports don't need to copy
and paste this fundamental stuff yet again.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some workloads that create a large number of small files tend to assign
too many pages to node 0 (multi-node systems). Part of the reason is that
the rotor (in cpuset_mem_spread_node()) used to assign nodes starts at
node 0 for newly created tasks.
This patch changes the rotor to be initialized to a random node number of
the cpuset.
[akpm@linux-foundation.org: fix layout]
[Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Menage <menage@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have observed several workloads running on multi-node systems where
memory is assigned unevenly across the nodes in the system. There are
numerous reasons for this but one is the round-robin rotor in
cpuset_mem_spread_node().
For example, a simple test that writes a multi-page file will allocate
pages on nodes 0 2 4 6 ... Odd nodes are skipped. (Sometimes it
allocates on odd nodes & skips even nodes).
An example is shown below. The program "lfile" writes a file consisting
of 10 pages. The program then mmaps the file & uses get_mempolicy(...,
MPOL_F_NODE) to determine the nodes where the file pages were allocated.
The output is shown below:
# ./lfile
allocated on nodes: 2 4 6 0 1 2 6 0 2
There is a single rotor that is used for allocating both file pages & slab
pages. Writing the file allocates both a data page & a slab page
(buffer_head). This advances the RR rotor 2 nodes for each page
allocated.
A quick confirmation seems to confirm this is the cause of the uneven
allocation:
# echo 0 >/dev/cpuset/memory_spread_slab
# ./lfile
allocated on nodes: 6 7 8 9 0 1 2 3 4 5
This patch introduces a second rotor that is used for slab allocations.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Menage <menage@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we are unable to handle an error returned by
cftype.unregister_event() properly, let's make the callback
void-returning.
mem_cgroup_unregister_event() has been rewritten to be a "never fail"
function. On mem_cgroup_usage_register_event() we save old buffer for
thresholds array and reuse it in mem_cgroup_usage_unregister_event() to
avoid allocation.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hrtimer_get_softirq_time() has it's own xtime lock protection, so it's
safe to use plain __current_kernel_time() and avoid the double seqlock
loop.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
LKML-Reference: <20100525214912.GA1934@r2bh72.net.upc.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (63 commits)
drivers/net/usb/asix.c: Fix pointer cast.
be2net: Bug fix to avoid disabling bottom half during firmware upgrade.
proc_dointvec: write a single value
hso: add support for new products
Phonet: fix potential use-after-free in pep_sock_close()
ath9k: remove VEOL support for ad-hoc
ath9k: change beacon allocation to prefer the first beacon slot
sock.h: fix kernel-doc warning
cls_cgroup: Fix build error when built-in
macvlan: do proper cleanup in macvlan_common_newlink() V2
be2net: Bug fix in init code in probe
net/dccp: expansion of error code size
ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleep
wireless: fix sta_info.h kernel-doc warnings
wireless: fix mac80211.h kernel-doc warnings
iwlwifi: testing the wrong variable in iwl_add_bssid_station()
ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs()
ath9k_htc: dereferencing before check in hif_usb_tx_cb()
rt2x00: Fix rt2800usb TX descriptor writing.
rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.
...
This reverts commit 480b02df3a, since
Rafael reports that it causes occasional kernel paging request faults in
load_module().
Dropping the module lock and re-taking it deep in the call-chain is
definitely not the right thing to do. That just turns the mutex from a
lock into a "random non-locking data structure" that doesn't actually
protect what it's supposed to protect.
Requested-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit 00b7c3395a
"sysctl: refactor integer handling proc code"
modified the behaviour of writing to /proc.
Before the commit, write("1\n") to /proc/sys/kernel/printk succeeded. But
now it returns EINVAL.
This commit supports writing a single value to a multi-valued entry.
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Reviewed-and-tested-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f00e047ef (timers: Fix slack calculation for expired timers)
fixed the issue of slack on expired timers only partially. Linus
noticed that jiffies is volatile so it is reloaded twice, which
generates bad code.
But its worse. This can defeat the time_after() check if jiffies are
incremented between time_after() and the slack calculation.
Fix it by reading jiffies into a local variable, which prevents the
compiler from loading it twice. While at it make the > -1 check into
>= 0 which is easier to read.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Currently the trace splice code zeros out the excess bytes in the page before
sending it off to userspace.
This is to make sure userspace is not getting anything it should not be
when reading the pages, because the excess data was never initialized
to zero before writing (for perfomance reasons).
But the splice code has no business in doing this work, it should be
done by the ring buffer. With the latest changes for recording lost
events, the splice code gets it wrong anyway.
Move the zeroing out of excess bytes into the ring buffer code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to store the "lost events" requires knowing the real end
of the page. Since the 'commit' includes the padding at the end of
a page a "real_end" variable was used to keep track of the end not
including the padding.
If events were lost, the reader can place the count of events in
the padded area if there is enough room.
The bug this patch fixes is that when we fill the page we do not
reset the real_end variable, and if the writer had wrapped a few
times, the real_end would be incorrect.
This patch simply resets the real_end if the page was filled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove own implementation of hex_to_bin().
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add global mutex zonelists_mutex to fix the possible race:
CPU0 CPU1 CPU2
(1) zone->present_pages += online_pages;
(2) build_all_zonelists();
(3) alloc_page();
(4) free_page();
(5) build_all_zonelists();
(6) __build_all_zonelists();
(7) zone->pageset = alloc_percpu();
In step (3,4), zone->pageset still points to boot_pageset, so bad
things may happen if 2+ nodes are in this state. Even if only 1 node
is accessing the boot_pageset, (3) may still consume too much memory
to fail the memory allocations in step (7).
Besides, atomic operation ensures alloc_percpu() in step (7) will never fail
since there is a new fresh memory block added in step(6).
[haicheng.li@linux.intel.com: hold zonelists_mutex when build_all_zonelists]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For each new populated zone of hotadded node, need to update its pagesets
with dynamically allocated per_cpu_pageset struct for all possible CPUs:
1) Detach zone->pageset from the shared boot_pageset
at end of __build_all_zonelists().
2) Use mutex to protect zone->pageset when it's still
shared in onlined_pages()
Otherwises, multiple zones of different nodes would share same boot strapping
boot_pageset for same CPU, which will finally cause below kernel panic:
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:1239!
invalid opcode: 0000 [#1] SMP
...
Call Trace:
[<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0
[<ffffffff81162e67>] alloc_pages_current+0x87/0xd0
[<ffffffff81128407>] __page_cache_alloc+0x67/0x70
[<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260
[<ffffffff81132751>] ra_submit+0x21/0x30
[<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0
[<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0
[<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670
[<ffffffff81266cfa>] nfs_file_read+0xca/0x130
[<ffffffff8117b20a>] do_sync_read+0xfa/0x140
[<ffffffff8117bf75>] vfs_read+0xb5/0x1a0
[<ffffffff8117c151>] sys_read+0x51/0x80
[<ffffffff8103c032>] system_call_fastpath+0x16/0x1b
RIP [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900
RSP <ffff88000d1e78a8>
---[ end trace 4bda28328b9990db ]
[akpm@linux-foundation.org: merge fix]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable users to online CPUs even if the CPUs belongs to a numa node which
doesn't have onlined local memory.
The zonlists(pg_data_t.node_zonelists[]) of a numa node are created either
in system boot/init period, or at the time of local memory online. For a
numa node without onlined local memory, its zonelists are not initialized
at present. As a result, any memory allocation operations executed by
CPUs within this node will fail. In fact, an out-of-memory error is
triggered when attempt to online CPUs before memory comes to online.
This patch tries to create zonelists for such numa nodes, so that the
memory allocation for this node can be fallback'ed to other nodes.
[akpm@linux-foundation.org: remove unneeded export]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: minskey guo<chaohong.guo@intel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel applies some heuristics when deciding if memory should be
compacted or reclaimed to satisfy a high-order allocation. One of these
is based on the fragmentation. If the index is below 500, memory will not
be compacted. This choice is arbitrary and not based on data. To help
optimise the system and set a sensible default for this value, this patch
adds a sysctl extfrag_threshold. The kernel will only compact memory if
the fragmentation index is above the extfrag_threshold.
[randy.dunlap@oracle.com: Fix build errors when proc fs is not configured]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a proc file /proc/sys/vm/compact_memory. When an arbitrary value is
written to the file, all zones are compacted. The expected user of such a
trigger is a job scheduler that prepares the system before the target
application runs.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before applying this patch, cpuset updates task->mems_allowed and
mempolicy by setting all new bits in the nodemask first, and clearing all
old unallowed bits later. But in the way, the allocator may find that
there is no node to alloc memory.
The reason is that cpuset rebinds the task's mempolicy, it cleans the
nodes which the allocater can alloc pages on, for example:
(mpol: mempolicy)
task1 task1's mpol task2
alloc page 1
alloc on node0? NO 1
1 change mems from 1 to 0
1 rebind task1's mpol
0-1 set new bits
0 clear disallowed bits
alloc on node1? NO 0
...
can't alloc page
goto oom
This patch fixes this problem by expanding the nodes range first(set newly
allowed bits) and shrink it lazily(clear newly disallowed bits). So we
use a variable to tell the write-side task that read-side task is reading
nodemask, and the write-side task clears newly disallowed nodes after
read-side task ends the current memory allocation.
[akpm@linux-foundation.org: fix spello]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin reported that the allocator may see an empty nodemask when
changing cpuset's mems[1]. It happens only on the kernel that do not do
atomic nodemask_t stores. (MAX_NUMNODES > BITS_PER_LONG)
But I found that there is also a problem on the kernel that can do atomic
nodemask_t stores. The problem is that the allocator can't find a node to
alloc page when changing cpuset's mems though there is a lot of free
memory. The reason is like this:
(mpol: mempolicy)
task1 task1's mpol task2
alloc page 1
alloc on node0? NO 1
1 change mems from 1 to 0
1 rebind task1's mpol
0-1 set new bits
0 clear disallowed bits
alloc on node1? NO 0
...
can't alloc page
goto oom
I can use the attached program reproduce it by the following step:
# mkdir /dev/cpuset
# mount -t cpuset cpuset /dev/cpuset
# mkdir /dev/cpuset/1
# echo `cat /dev/cpuset/cpus` > /dev/cpuset/1/cpus
# echo `cat /dev/cpuset/mems` > /dev/cpuset/1/mems
# echo $$ > /dev/cpuset/1/tasks
# numactl --membind=`cat /dev/cpuset/mems` ./cpuset_mem_hog <nr_tasks> &
<nr_tasks> = max(nr_cpus - 1, 1)
# killall -s SIGUSR1 cpuset_mem_hog
# ./change_mems.sh
several hours later, oom will happen though there is a lot of free memory.
This patchset fixes this problem by expanding the nodes range first(set
newly allowed bits) and shrink it lazily(clear newly disallowed bits). So
we use a variable to tell the write-side task that read-side task is
reading nodemask, and the write-side task clears newly disallowed nodes
after read-side task ends the current memory allocation.
This patch:
In order to fix no node to alloc memory, when we want to update mempolicy
and mems_allowed, we expand the set of nodes first (set all the newly
nodes) and shrink the set of nodes lazily(clean disallowed nodes), But the
mempolicy's rebind functions may breaks the expanding.
So we restructure the mempolicy's rebind functions and split the rebind
work to two steps, just like the update of cpuset's mems: The 1st step:
expand the set of the mempolicy's nodes. The 2nd step: shrink the set of
the mempolicy's nodes. It is used when there is no real lock to protect
the mempolicy in the read-side. Otherwise we can do rebind work at once.
In order to implement it, we define
enum mpol_rebind_step {
MPOL_REBIND_ONCE,
MPOL_REBIND_STEP1,
MPOL_REBIND_STEP2,
MPOL_REBIND_NSTEP,
};
If the mempolicy needn't be updated by two steps, we can pass
MPOL_REBIND_ONCE to the rebind functions. Or we can pass
MPOL_REBIND_STEP1 to do the first step of the rebind work and pass
MPOL_REBIND_STEP2 to do the second step work.
Besides that, it maybe long time between these two step and we have to
release the lock that protects mempolicy and mems_allowed. If we hold the
lock once again, we must check whether the current mempolicy is under the
rebinding (the first step has been done) or not, because the task may
alloc a new mempolicy when we don't hold the lock. So we defined the
following flag to identify it:
#define MPOL_F_REBINDING (1 << 2)
The new functions will be used in the next patch.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch b7e2ecef92 (perf, trace: Optimize tracepoints by removing
IRQ-disable from perf/tracepoint interaction) made the
unfortunate mistake of assuming the world is x86 only, correct
this.
The problem was that perf_fetch_caller_regs() did
local_save_flags() into regs->flags, and I re-used that to
remove another local_save_flags(), forgetting !x86 doesn't have
regs->flags.
Do the reverse, remove the local_save_flags() from
perf_fetch_caller_regs() and let the ftrace site do the
local_save_flags() instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: acme@redhat.com
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1274778175.5882.623.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
commit 3bbb9ec946 (timers: Introduce the concept of timer slack for
legacy timers) does not take the case into account when the timer is
already expired. This broke wireless drivers.
The solution is not to apply slack to already expired timers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
commit 64ce4c2f (time: Clean up warp_clock()) breaks the timezone
update in a very subtle way. To avoid the direct access to timekeeping
internals it adds the timezone delta to the current time with
timespec_add_safe(). This works nicely when the timezone delta is > 0.
If timezone delta is < 0 then the wrap check in timespec_add_safe()
triggers and timespec_add_safe() returns TIME_MAX and screws up
timekeeping completely.
The comment above timespec_add_safe() says:
It's assumed that both values are valid (>= 0)
Add the timezone seconds adjustment directly.
Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* git://git.infradead.org/iommu-2.6:
intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
intel-iommu: Combine the BIOS DMAR table warning messages
panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
panic: Allow warnings to set different taint flags
intel-iommu: intel_iommu_map_range failed at very end of address space
intel-iommu: errors with smaller iommu widths
intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled
intel-iommu: use physfn to search drhd for VF
intel-iommu: Print out iommu seq_id
intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported
intel-iommu: Avoid global flushes with caching mode.
intel-iommu: Use correct domain ID when caching mode is enabled
intel-iommu mistakenly uses offset_pfn when caching mode is enabled
intel-iommu: use for_each_set_bit()
intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: drop the lock while waiting for module to complete initialization.
MODULE_DEVICE_TABLE(isapnp, ...) does nothing
hisax_fcpcipnp: fix broken isapnp device table.
isapnp: move definitions to mod_devicetable.h so file2alias can reach them.
* 'for-2.6.35' of git://git.kernel.dk/linux-2.6-block: (86 commits)
pipe: set lower and upper limit on max pages in the pipe page array
pipe: add support for shrinking and growing pipes
drbd: This is now equivalent to drbd release 8.3.8rc1
drbd: Do not free p_uuid early, this is done in the exit code of the receiver
drbd: Null pointer deref fix to the large "multi bio rewrite"
drbd: Fix: Do not detach, if a bio with a barrier fails
drbd: Ensure to not trigger late-new-UUID creation multiple times
drbd: Do not Oops when C_STANDALONE when uuid gets generated
writeback: fix mixed up arguments to bdi_start_writeback()
writeback: fix problem with !CONFIG_BLOCK compilation
block: improve automatic native capacity unlocking
block: use struct parsed_partitions *state universally in partition check code
block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity()
block: restart partition scan after resizing a device
buffer: make invalidate_bdev() drain all percpu LRU add caches
block: remove all rcu head initializations
writeback: fixups for !dirty_writeback_centisecs
writeback: bdi_writeback_task() must set task state before calling schedule()
writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync
drivers/block/drbd: Use kzalloc
...
Fix kernel-doc warnings, kernel-doc special characters, and
typos in recent kernel/sysctl.c additions.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need at least two to guarantee proper POSIX behaviour, so
never allow a smaller limit than that.
Also expose a /proc/sys/fs/pipe-max-pages sysctl file that allows
root to define a sane upper limit. Make it default to 16 times the
default size, which is 16 pages.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for
growing and shrinking the size of a pipe and adjusts pipe.c and splice.c
(and relay and network splice) usage to work with these larger (or smaller)
pipes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
echi-dbgp: Add kernel debugger support for the usb debug port
earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb
kgdboc: Add ekgdboc for early use of the kernel debugger
x86,early dr regs,kgdb: Allow kernel debugger early dr register access
x86,kgdb: Implement early hardware breakpoint debugging
x86, kgdb, init: Add early and late debug states
x86, kgdb: early trap init for early debug
* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
kdb,debug_core: Allow the debug core to receive a panic notification
MAINTAINERS: update kgdb, kdb, and debug_core info
debug_core,kdb: Allow the debug core to process a recursive debug entry
printk,kdb: capture printk() when in kdb shell
kgdboc,kdb: Allow kdb to work on a non open console port
kgdb: Add the ability to schedule a breakpoint via a tasklet
mips,kgdb: kdb low level trap catch and stack trace
powerpc,kgdb: Introduce low level trap catching
x86,kgdb: Add low level debug hook
kgdb: remove post_primary_code references
kgdb,docs: Update the kgdb docs to include kdb
kgdboc,keyboard: Keyboard driver for kdb with kgdb
kgdb: gdb "monitor" -> kdb passthrough
sparc,sunzilog: Add console polling support for sunzilog serial driver
sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
kgdb,8250,pl011: Return immediately from console poll
kgdb: core changes to support kdb
kdb: core for kgdb back end (2 of 2)
kdb: core for kgdb back end (1 of 2)
kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
...
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.
Add a checkpatch error so the usage is reserved for device->mutex.
[ tglx: checkpatch and compile fix for LOCKDEP=n ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Of the three uses of kref_set in the kernel:
One really should be kref_put as the code is letting go of a
reference,
Two really should be kref_init because the kref is being
initialised.
This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)
[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline
[SCSI] aacraid: prohibit access to array container space
[SCSI] aacraid: add support for handling ATA pass-through commands.
[SCSI] aacraid: expose physical devices for models with newer firmware
[SCSI] aacraid: respond automatically to volumes added by config tool
[SCSI] fcoe: fix fcoe module ref counting
[SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
[SCSI] libfcoe: Fix incorrect MAC address clearing
[SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex
[SCSI] libfc: Move the port_id into lport
[SCSI] fcoe: move link speed checking into its own routine
[SCSI] libfc: Remove extra pointer check
[SCSI] libfc: Remove unused fc_get_host_port_type
[SCSI] fcoe: fixes wrong error exit in fcoe_create
[SCSI] libfc: set seq_id for incoming sequence
[SCSI] qla2xxx: Updates to ISP82xx support.
[SCSI] qla2xxx: Optionally disable target reset.
[SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
[SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.
[SCSI] qla2xxx: T10 DIF support added.
...
Since we know tracepoints come from kernel context,
avoid conditionals that try and establish that very
fact.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.904944001@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reduce code and data by using the knowledge that for
!PERF_USE_VMALLOC data_order is always 0.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.795019386@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reduce the clutter in perf_output_copy() by keeping
an interator in perf_output_handle.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.742809176@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
RO mmap()s don't update the tail pointer, so
comparing against it for determining the written data
size doesn't really do any good.
Keep track of when we last did a wakeup, and compare
against that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.684479310@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we want to ensure buffers only have a single
writer, we must avoid creating one with multiple.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.528215873@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid the swevent hash-table by using per-tracepoint
hlists.
Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
qlcnic: adding co maintainer
ixgbe: add support for active DA cables
ixgbe: dcb, do not tag tc_prio_control frames
ixgbe: fix ixgbe_tx_is_paused logic
ixgbe: always enable vlan strip/insert when DCB is enabled
ixgbe: remove some redundant code in setting FCoE FIP filter
ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
ixgbe: fix header len when unsplit packet overflows to data buffer
ipv6: Never schedule DAD timer on dead address
ipv6: Use POSTDAD state
ipv6: Use state_lock to protect ifa state
ipv6: Replace inet6_ifaddr->dead with state
cxgb4: notify upper drivers if the device is already up when they load
cxgb4: keep interrupts available when the ports are brought down
cxgb4: fix initial addition of MAC address
cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
cnic: Convert cnic_local_flags to atomic ops.
can: Fix SJA1000 command register writes on SMP systems
bridge: fix build for CONFIG_SYSFS disabled
ARCNET: Limit com20020 PCI ID matches for SOHARD cards
...
Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).
Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.
This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.
The kdb shell already had a similar restriction with an early
initialization and late initialization. The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();
CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
It is highly desirable to trap into kdb on panic. The debug core will
attempt to register as the first in line for the panic notifier.
CC: Ingo Molnar <mingo@elte.hu>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Certain calls from the kdb shell will call out to printk(), and any of
these calls should get vectored back to the kdb_printf() so that the
kdb pager and processing can be used, as well as to properly channel
I/O to the polled I/O devices.
CC: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
If kdb is open on a serial port that is not actually a console make
sure to call the poll routines to emit and receive characters.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
Some kgdb I/O modules require the ability to create a breakpoint
tasklet, such as kgdboc and external modules such as kgdboe. The
breakpoint tasklet is used as an asynchronous entry point into the
debugger which will have a different function scope than the current
execution path where it might not be safe to have an inline
breakpoint. This is true of some of the kgdb I/O drivers which share
code with kgdb and rest of the kernel users.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The only way the debugger can handle a trap in inside rcu_lock,
notify_die, or atomic_notifier_call_chain without a triple fault is
to have a low level "first opportunity handler" in the int3 exception
handler.
Generally this will be something the vast majority of folks will not
need, but for those who need it, it is added as a kernel .config
option called KGDB_LOW_LEVEL_TRAP.
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: H. Peter Anvin <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Remove all the references to the kgdb_post_primary_code. This
function serves no useful purpose because you can obtain the same
information from the "struct kgdb_state *ks" from with in the
debugger, if for some reason you want the data.
Also remove the unintentional duplicate assignment for ks->ex_vector.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
This patch adds in the kdb PS/2 keyboard driver. This was mostly a
direct port from the original kdb where I cleaned up the code against
checkpatch.pl and added the glue to stitch it into kgdb.
This patch also enables early kdb debug via kgdbwait and the keyboard.
All the access to configure kdb using either a serial console or the
keyboard is done via kgdboc.
If you want to use only the keyboard and want to break in early you
would add to your kernel command arguments:
kgdboc=kbd kgdbwait
If you wanted serial and or the keyboard access you could use:
kgdboc=kbd,ttyS0
You can also configure kgdboc as a kernel module or at run time with
the sysfs where you can activate and deactivate kgdb.
Turn it on:
echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc
Turn it off:
echo "" > /sys/module/kgdboc/parameters/kgdboc
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
One of the driving forces behind integrating another front end (kdb)
to the debug core is to allow front end commands to be accessible via
gdb's monitor command. It is true that you could write gdb macros to
get certain data, but you may want to just use gdb to access the
commands that are available in the kdb front end.
This patch implements the Rcmd gdb stub packet. In gdb you access
this with the "monitor" command. For instance you could type "monitor
help", "monitor lsmod" or "monitor ps A" etc...
There is no error checking or command restrictions on what you can and
cannot access at this point. Doing something like trying to set
breakpoints with the monitor command is going to cause nothing but
problems. Perhaps in the future only the commands that are actually
known to work with the gdb monitor command will be available.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The design of the kdb shell requires that every device that can
provide input to kdb have a polling routine that exits immediately if
there is no character available. This is required in order to get the
page scrolling mechanism working.
Changing the kernel debugger I/O API to require all polling character
routines to exit immediately if there is no data allows the kernel
debugger to process multiple input channels.
NO_POLL_CHAR will be the return code to the polling routine when ever
there is no character available.
CC: linux-serial@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
These are the minimum changes to the kgdb core in order to enable an
API to connect a new front end (kdb) to the debug core.
This patch introduces the dbg_kdb_mode variable controls where the
user level I/O is routed. It will be routed to the gdbstub (kgdb) or
to the kdb front end which is a simple shell available over the kgdboc
connection.
You can switch back and forth between kdb or the gdb stub mode of
operation dynamically. From gdb stub mode you can blindly type
"$3#33", or from the kdb mode you can enter "kgdb" to switch to the
gdb stub.
The logic in the debug core depends on kdb to look for the typical gdb
connection sequences and return immediately with KGDB_PASS_EVENT if a
gdb serial command sequence is detected. That should allow a
reasonably seamless transition between kdb -> gdb without leaving the
kernel exception state. The two gdb serial queries that kdb is
responsible for detecting are the "?" and "qSupported" packets.
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
This patch contains the hooks and instrumentation into kernel which
live outside the kernel/debug directory, which the kdb core
will call to run commands like lsmod, dmesg, bt etc...
CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
This patch contains only the kdb core. Because the change set was
large, it was split. The next patch in the series includes the
instrumentation into the core kernel which are mainly helper functions
for kdb.
This work is directly derived from kdb v4.4 found at:
ftp://oss.sgi.com/projects/kdb/download/v4.4/
The kdb internals have been re-organized to make them mostly platform
independent and to connect everything to the debug core which is used by
gdbstub (which has long been known as kgdb).
The original version of kdb was 58,000 lines worth of changes to
support x86. From that implementation only the kdb shell, and basic
commands for memory access, runcontrol, lsmod, and dmesg where carried
forward.
This is a generic implementation which aims to cover all the current
architectures using the kgdb core: ppc, arm, x86, mips, sparc, sh and
blackfin. More archictectures can be added by implementing the
architecture specific kgdb functions.
[mort@sgi.com: Compile fix with hugepages enabled]
[mort@sgi.com: Clean breakpoint code renaming kdba_ -> kdb_]
[mort@sgi.com: fix new line after printing registers]
[mort@sgi.com: Remove the concept of global vs. local breakpoints]
[mort@sgi.com: Rework kdb_si_swapinfo to use more generic name]
[mort@sgi.com: fix the information dump macros, remove 'arch' from the names]
[sfr@canb.auug.org.au: include fixup to include linux/slab.h]
CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
Split the former kernel/kgdb.c into debug_core.c which contains the
kernel debugger exception logic and to the gdbstub.c which contains
the logic for allowing gdb to talk to the debug core.
This also created a private include file called debug_core.h which
contains all the definitions to glue the debug_core to any other
debugger connections.
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Move kgdb.c in preparation to separate the gdbstub from the debug
core and exception handling.
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
New wait_event_interruptible{,_exclusive}_locked{,_irq} macros added.
They work just like versions without _locked* suffix but require the
wait queue's lock to be held. Also __wake_up_locked() is now exported
as to pair it with the above macros.
The use case of this new facility is when one uses wait queue's lock
to protect a data structure. This may be advantageous if the
structure needs to be protected by a spinlock anyway. In particular,
with additional spinlock the following code has to be used to wait
for a condition:
spin_lock(&data.lock);
...
for (ret = 0; !ret && !(condition); ) {
spin_unlock(&data.lock);
ret = wait_event_interruptible(data.wqh, (condition));
spin_lock(&data.lock);
}
...
spin_unlock(&data.lock);
This looks bizarre plus wait_event_interruptible() locks the wait
queue's lock anyway so there is a unlock+lock sequence where it could
be avoided.
To avoid those problems and benefit from wait queue's lock, a code
similar to the following should be used:
/* Waiting */
spin_lock(&data.wqh.lock);
...
ret = wait_event_interruptible_locked(data.wqh, (condition));
...
spin_unlock(&data.wqh.lock);
/* Waiting exclusively */
spin_lock(&data.whq.lock);
...
ret = wait_event_interruptible_exclusive_locked(data.whq, (condition));
...
spin_unlock(&data.whq.lock);
/* Waking up */
spin_lock(&data.wqh.lock);
...
wake_up_locked(&data.wqh);
...
spin_unlock(&data.wqh.lock);
When spin_lock_irq() is used matching versions of macros need to be
used (*_locked_irq()).
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A writer that gets a reference to the buffer handle disables
preemption. When we put that reference, we check if we are
the outer most writer and if not, we simply return and defer
the head update to the outer most writer. The problem here
is that preemption is only reenabled by the outer most, that
produces preemption count imbalance for every nested writer
that exit.
So just don't forget to always re-enable preemption when we
put the buffer reference, whoever we are.
Fixes lots of sleeping in atomic warnings, visible with lock
events recording.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
vlynq: make whole Kconfig-menu dependant on architecture
add descriptive comment for TIF_MEMDIE task flag declaration.
EEPROM: max6875: Header file cleanup
EEPROM: 93cx6: Header file cleanup
EEPROM: Header file cleanup
agp: use NULL instead of 0 when pointer is needed
rtc-v3020: make bitfield unsigned
PCI: make bitfield unsigned
jbd2: use NULL instead of 0 when pointer is needed
cciss: fix shadows sparse warning
doc: inode uses a mutex instead of a semaphore.
uml: i386: Avoid redefinition of NR_syscalls
fix "seperate" typos in comments
cocbalt_lcdfb: correct sections
doc: Change urls for sparse
Powerpc: wii: Fix typo in comment
i2o: cleanup some exit paths
Documentation/: it's -> its where appropriate
UML: Fix compiler warning due to missing task_struct declaration
UML: add kernel.h include to signal.c
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: change cancel_work_sync() to clear work->data
workqueue: warn about flush_scheduled_work()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (61 commits)
KEYS: Return more accurate error codes
LSM: Add __init to fixup function.
TOMOYO: Add pathname grouping support.
ima: remove ACPI dependency
TPM: ACPI/PNP dependency removal
security/selinux/ss: Use kstrdup
TOMOYO: Use stack memory for pending entry.
Revert "ima: remove ACPI dependency"
Revert "TPM: ACPI/PNP dependency removal"
KEYS: Do preallocation for __key_link()
TOMOYO: Use mutex_lock_interruptible.
KEYS: Better handling of errors from construct_alloc_key()
KEYS: keyring_serialise_link_sem is only needed for keyring->keyring links
TOMOYO: Use GFP_NOFS rather than GFP_KERNEL.
ima: remove ACPI dependency
TPM: ACPI/PNP dependency removal
selinux: generalize disabling of execmem for plt-in-heap archs
LSM Audit: rename LSM_AUDIT_NO_AUDIT to LSM_AUDIT_DATA_NONE
CRED: Holding a spinlock does not imply the holding of RCU read lock
SMACK: Don't #include Ext2 headers
...
The software events hlist doesn't fully comply with the new
rcu checks api.
We need to consider three different sides that access the hlist:
- the hlist allocation/release side. This side happens when an
events is created or released, accesses to the hlist are
serialized under the cpuctx mutex.
- the events insertion/removal in the hlist. This side is always
serialized against the above one. The hlist is always present
during such operations. This side happens when a software event
is scheduled in/out. The serialization that ensures the software
event is really attached to the context is made under the
ctx->lock.
- events triggering. This is the read side, it can happen
concurrently with any update side.
This patch deals with them one by one and anticipates with the
separate rcu mem space patches in preparation.
This patch fixes various annoying rcu warnings.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: Add clocksource_register_hz/khz interface
posix-cpu-timers: Optimize run_posix_cpu_timers()
time: Remove xtime_cache
mqueue: Convert message queue timeout to use hrtimers
hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME
timers: Introduce the concept of timer slack for legacy timers
ntp: Remove tickadj
ntp: Make time_adjust static
time: Add xtime, wall_to_monotonic to feature-removal-schedule
timer: Try to survive timer callback preempt_count leak
timer: Split out timer function call
timer: Print function name for timer callbacks modifying preemption count
time: Clean up warp_clock()
cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
cpu-timers: Change SIGEV_NONE timer implementation
cpu-timers: Return correct previous timer reload value
cpu-timers: Cleanup arm_timer()
cpu-timers: Simplify RLIMIT_CPU handling
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Clear CPU mask in affinity_hint when none is provided
genirq: Add CPU mask affinity hint
genirq: Remove IRQF_DISABLED from core code
genirq: Run irq handlers with interrupts disabled
genirq: Introduce request_any_context_irq()
genirq: Expose irq_desc->node in proc/irq
Fixed up trivial conflicts in Documentation/feature-removal-schedule.txt
Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which
abuses sched_getaffinity to find out NR_CPUS in order to parse
/sys/devices/system/node/node*/cpumap.
On NUMA systems with less than 32 possibly CPUs, the current
compat_sys_sched_getaffinity now returns '4' instead of the actual
NR_CPUS/8, which makes libnuma bail out when parsing the cpumap.
The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean
the libnuma expect the return value of sched_getaffinity() is either len
argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids.
Strictly speaking, userland requirement are
1) Glibc assume the return value mean the lengh of initialized
of mask argument. E.g. if sched_getaffinity(1024) return 128,
glibc make zero fill rest 896 byte.
2) Libnuma assume the return value can be used to guess NR_CPUS
in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But
it try len=4096 at first and 4096 is always bigger than
NR_CPUS. Then, if we remove strange min_length normalization,
we never hit -EINVAL case.
sched_getaffinity() already solved this issue. This patch adapts
compat_sys_sched_getaffinity() to match the non-compat case.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ken Werner <ken.werner@web.de>
Cc: stable@kernel.org
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just a bunch of conversions as suggested by Frederic W.
__get_cpu_var() provides preemption disabled checks.
Plus it gives more readability as it makes it obvious
we are dealing locally now with these vars.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1274133966-18415-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This fixes "gave up waiting for init of module libcrc32c." which
happened at boot time due to multiple parallel module loads.
The problem was a deadlock: we wait for a module to finish
initializing, but we keep the module_lock mutex so it can't complete.
In particular, this could reasonably happen if a module does a
request_module() in its initialization routine.
So we change use_module() to return an errno rather than a bool, and if
it's -EBUSY we drop the lock and wait in the caller, then reaquire the
lock.
Reported-by: Brandon Philips <brandon@ifup.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Brandon Philips <brandon@ifup.org>
This taint flag will initially be used when warning about invalid ACPI
DMAR tables.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
WARN() is used in some places to report firmware or hardware bugs that
are then worked-around. These bugs do not affect the stability of the
kernel and should not set the flag for TAINT_WARN. To allow for this,
add WARN_TAINT() and WARN_TAINT_ONCE() macros that take a taint number
as argument.
Architectures that implement warnings using trap instructions instead
of calls to warn_slowpath_*() now implement __WARN_TAINT(taint)
instead of __WARN().
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Currently, we can hit a nasty case with optimistic
spinning on mutexes:
CPU A tries to take a mutex, while holding the BKL
CPU B tried to take the BLK while holding the mutex
This looks like a AB-BA scenario but in practice, is
allowed and happens due to the auto-release on
schedule() nature of the BKL.
In that case, the optimistic spinning code can get us
into a situation where instead of going to sleep, A
will spin waiting for B who is spinning waiting for
A, and the only way out of that loop is the
need_resched() test in mutex_spin_on_owner().
This patch fixes it by completely disabling spinning
if we own the BKL. This adds one more detail to the
extensive list of reasons why it's a bad idea for
kernel code to be holding the BKL.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>
LKML-Reference: <20100519054636.GC12389@ozlabs.org>
[ added an unlikely() attribute to the branch ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add get_online_cpus/put_online_cpus to ensure that no cpu goes
offline during the flushing of the padata percpu queues.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
yield was used to wait until all references of the internal control
structure in use are dropped before it is freed. This patch implements
padata_flush_queues which actively flushes the padata percpu queues
in this case.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
padata_get_next needs to check whether the next object that
need serialization must be parallel processed by the local cpu.
This check was wrong implemented and returned always true,
so the try_again loop in padata_reorder was never taken. This
can lead to object leaks in some rare cases due to a race that
appears with the trylock in padata_reorder. The try_again loop
was not a good idea after all, because a cpu could take that
loop frequently, so we handle this with a timer instead.
This patch adds a timer to handle the race that appears with
the trylock. If cpu1 queues an object to the reorder queue while
cpu2 holds the pd->lock but left the while loop in padata_reorder
already, cpu2 can't care for this object and cpu1 exits because
it can't get the lock. Usually the next cpu that takes the lock
cares for this object too. We need the timer just if this object
was the last one that arrives to the reorder queues. The timer
function sends it out in this case.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the x86 XCHG ins implies LOCK, avoid the use by
using a sequence count instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since there is now only a single writer, we can use
local_t instead and avoid all these pesky LOCK insn.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we can now assume there is only a single writer
to each buffer, we can remove per-cpu lock thingy and
use a simply nest-count to the same effect.
This removes the need to disable IRQs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we now have working per-task-per-cpu events for
a while, disallow mmap() on per-task inherited
events. Those things were a performance problem
anyway, and doing away with it allows us to optimize
the buffer somewhat by assuming there is only a
single writer.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ensure cpu bound buffers live on the right NUMA node.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1274114880.5605.5236.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In case the sampling buffer has no "payload" pages,
nr_pages is 0. The problem is that the error path in
perf_output_begin() skips to a label which assumes
perf_output_lock() has been issued which is not the
case. That triggers a WARN_ON() in
perf_output_unlock().
This patch fixes the problem by skipping
perf_output_unlock() in case data->nr_pages is 0.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4bf13674.014fd80a.6c82.ffffb20c@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix "integer as NULL pointer" warning.
tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
tracing: Make the documentation clear on trace_event boot option
ring-buffer: Wrap open-coded WARN_ONCE
tracing: Convert nop macros to static inlines
tracing: Fix sleep time function profiling
tracing: Show sample std dev in function profiling
tracing: Add documentation for trace commands mod, traceon/traceoff
ring-buffer: Make benchmark handle missed events
ring-buffer: Make non-consuming read less expensive with lots of cpus.
tracing: Add graph output support for irqsoff tracer
tracing: Have graph flags passed in to ouput functions
tracing: Add ftrace events for graph tracer
tracing: Dump either the oops's cpu source or all cpus buffers
tracing: Fix uninitialized variable of tracing/trace output
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
sched, wait: Use wrapper functions
sched: Remove a stale comment
ondemand: Make the iowait-is-busy time a sysfs tunable
ondemand: Solve a big performance issue by counting IOWAIT time as busy
sched: Intoduce get_cpu_iowait_time_us()
sched: Eliminate the ts->idle_lastupdate field
sched: Fold updating of the last_update_time_info into update_ts_time_stats()
sched: Update the idle statistics in get_cpu_idle_time_us()
sched: Introduce a function to update the idle statistics
sched: Add a comment to get_cpu_idle_time_us()
cpu_stop: add dummy implementation for UP
sched: Remove rq argument to the tracepoints
rcu: need barrier() in UP synchronize_sched_expedited()
sched: correctly place paranioa memory barriers in synchronize_sched_expedited()
sched: kill paranoia check in synchronize_sched_expedited()
sched: replace migration_thread with cpu_stop
stop_machine: reimplement using cpu_stop
cpu_stop: implement stop_cpu[s]()
sched: Fix select_idle_sibling() logic in select_task_rq_fair()
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
perf tools: Add mode to build without newt support
perf symbols: symbol inconsistency message should be done only at verbose=1
perf tui: Add explicit -lslang option
perf options: Type check all the remaining OPT_ variants
perf options: Type check OPT_BOOLEAN and fix the offenders
perf options: Check v type in OPT_U?INTEGER
perf options: Introduce OPT_UINTEGER
perf tui: Add workaround for slang < 2.1.4
perf record: Fix bug mismatch with -c option definition
perf options: Introduce OPT_U64
perf tui: Add help window to show key associations
perf tui: Make <- exit menus too
perf newt: Add single key shortcuts for zoom into DSO and threads
perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
perf newt: Fix the 'A'/'a' shortcut for annotate
perf newt: Make <- exit the ui_browser
x86, perf: P4 PMU - fix counters management logic
perf newt: Make <- zoom out filters
perf report: Report number of events, not samples
perf hist: Clarify events_stats fields usage
...
Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
oprofile/x86: make AMD IBS hotplug capable
oprofile/x86: notify cpus only when daemon is running
oprofile/x86: reordering some functions
oprofile/x86: stop disabled counters in nmi handler
oprofile/x86: protect cpu hotplug sections
oprofile/x86: remove CONFIG_SMP macros
oprofile/x86: fix uninitialized counter usage during cpu hotplug
oprofile/x86: remove duplicate IBS capability check
oprofile/x86: move IBS code
oprofile/x86: return -EBUSY if counters are already reserved
oprofile/x86: moving shutdown functions
oprofile/x86: reserve counter msrs pairwise
oprofile/x86: rework error handler in nmi_setup()
oprofile: update file list in MAINTAINERS file
oprofile: protect from not being in an IRQ context
oprofile: remove double ring buffering
ring-buffer: Add lost event count to end of sub buffer
tracing: Show the lost events in the trace_pipe output
ring-buffer: Add place holder recording of dropped events
tracing: Fix compile error in module tracepoints when MODULE_UNLOAD not set
...
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
rcu: remove all rcu head initializations, except on_stack initializations
rcu head introduce rcu head init on stack
Debugobjects transition check
rcu: fix build bug in RCU_FAST_NO_HZ builds
rcu: RCU_FAST_NO_HZ must check RCU dyntick state
rcu: make SRCU usable in modules
rcu: improve the RCU CPU-stall warning documentation
rcu: reduce the number of spurious RCU_SOFTIRQ invocations
rcu: permit discontiguous cpu_possible_mask CPU numbering
rcu: improve RCU CPU stall-warning messages
rcu: print boot-time console messages if RCU configs out of ordinary
rcu: disable CPU stall warnings upon panic
rcu: enable CPU_STALL_VERBOSE by default
rcu: slim down rcutiny by removing rcu_scheduler_active and friends
rcu: refactor RCU's context-switch handling
rcu: rename rcutiny rcu_ctrlblk to rcu_sched_ctrlblk
rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
rcu: fix now-bogus rcu_scheduler_active comments.
rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
rcu: ignore offline CPUs in last non-dyntick-idle CPU check
...
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: Reduce stack_trace usage
lockdep: No need to disable preemption in debug atomic ops
lockdep: Actually _dec_ in debug_atomic_dec
lockdep: Provide off case for redundant_hardirqs_on increment
lockdep: Simplify debug atomic ops
lockdep: Fix redundant_hardirqs_on incremented with irqs enabled
lockstat: Make lockstat counting per cpu
i8253: Convert i8253_lock to raw_spinlock
This addresses the following compiler warning:
kernel/stop_machine.c: In function 'cpu_stop_cpu_callback':
kernel/stop_machine.c:297: warning: unused variable 'work'
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <tip-3fc1f1e27a5b807791d72e5d992aa33b668a6626@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The exception-trace facility on x86 and other architectures prints
traces to dmesg whenever a user space application crashes.
s390 has such a feature since ages however it is called
userprocess_debug and is enabled differently.
This patch makes sure that whenever one of the two procfs files
/proc/sys/kernel/userprocess_debug
/proc/sys/debug/exception-trace
is modified the contents of the second one changes as well.
That way we keep backwards compatibilty but also support the same
interface like other architectures do.
Besides that the output of the traces is improved since it will now
also contain the corresponding filename of the vma (when available)
where the process caused a fault or trap.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This update handles a use case where pm_qos update requests need to
silently fail if the update is being sent to a handle that is NULL.
The problem was that the original pm_qos silently fails when a request
update is passed to a parameter that has not been added to the list yet.
This update restores that behavior.
Signed-off-by: markgross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The new function can be used to read/write large bitmaps via /proc. A
comma separated range format is used for compact output and input
(e.g. 1,3-4,10-10).
Writing into the file will first reset the bitmap then update it
based on the given input.
Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(Based on Octavian's work, and I modified a lot.)
As we are about to add another integer handling proc function a little
bit of cleanup is in order: add a few helper functions to improve code
readability and decrease code duplication.
In the process a bug is also fixed: if the user specifies a number
with more then 20 digits it will be interpreted as two integers
(e.g. 10000...13 will be interpreted as 100.... and 13).
Behavior for EFAULT handling was changed as well. Previous to this
patch, when an EFAULT error occurred in the middle of a write
operation, although some of the elements were set, that was not
acknowledged to the user (by shorting the write and returning the
number of bytes accepted). EFAULT is now treated just like any other
errors by acknowledging the amount of bytes accepted.
Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combining the softlockup and hardlockup code causes watchdog.c
to build even without the hardlockup detection support.
So if an arch, that has the previous and the new nmi watchdog
implementations cohabiting, wants to know if the generic one
is in use, CONFIG_LOCKUP_DETECTOR is not a reliable check.
We need to use CONFIG_HARDLOCKUP_DETECTOR instead.
Fixes:
kernel/built-in.o: In function `touch_nmi_watchdog':
(.text+0x449bc): multiple definition of `touch_nmi_watchdog'
arch/sparc/kernel/built-in.o:(.text+0x11b28): first defined here
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <20100514151121.GR15159@redhat.com>
[ use CONFIG_HARDLOCKUP_DETECTOR instead of CONFIG_PERF_EVENTS_NMI]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This new config is deemed to simplify even more the lockup detector
dependencies and can make it easier to bring a smooth sorting
between archs that support the new generic lockup detector and those
that still have their own, especially for those that are in the
middle of this migration.
Instead of checking whether we have CONFIG_LOCKUP_DETECTOR +
CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs
to build its own lockup detector, take a shortcut with this new
config. It is enabled only if the hardlockup detection part of
the whole lockup detector is on.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
If the kernel is large or the profiling step small, /proc/profile
leaks data and readprofile shows silly stats, until readprofile -r
has reset the buffer: clear the prof_buffer when it is vmalloc()ed.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4894944 1018052 861512 6774508 675eec vmlinux.id
4894871 1012292 861512 6768675 674823 vmlinux.flags
This gives us another 5K in savings.
The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.
Note: Although Mathieu gave his Acked-by, he would like it documented
that the reads of flags are not protected by the mutex. The way the
code works, these reads will not break anything, but will have a
residual effect. Since this behavior is the same even before this
patch, describing this situation is left to another patch, as this
patch does not change the behavior, but just brought it to Mathieu's
attention.
v2: Updated the event trace self test to for this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.
Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4895024 1023812 861512 6780348 6775bc vmlinux.print
4894944 1018052 861512 6774508 675eec vmlinux.id
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.
This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
4895024 1023812 861512 6780348 6775bc vmlinux.print
To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.
The event itself is now passed to the print function to let the print
function know what kind of event it should print.
This opens the door to consolidating the way several events print
their output.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
This change slightly increases the size but is needed for the next change.
v3: Fix the branch tracer events to handle this change.
v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.
Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.
Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
4900382 1048964 861512 6810858 67ecea vmlinux.init
The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.
After this change the size of the kernel dropped another 3K:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900252 1057412 861512 6819176 680d68 vmlinux.regs
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.
Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.
The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.
The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.
v2: Fixed the syscall fields. The syscall metadata needs a list
of fields for both enter and exit.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.
The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.
The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.
To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.
With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
4900252 1057412 861512 6819176 680d68 vmlinux.regs
The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.
v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
specific structure in trace_events.c.
v4: Fixed trace self tests to check probe because regfunc no longer
exists.
v3: Updated to handle void *data in beginning of probe parameters.
Also added the tracepoint: check_trace_callback_type_##call().
v2: Changed the callback probes to pass void * and typecast the
value within the function.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds data to be passed to tracepoint callbacks.
The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:
DECLARE_TRACE(mytracepoint, int value, value)
Will create the register function:
int register_trace_mytracepoint((void(*)(void *data, int value))probe,
void *data);
As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:
void myprobe(void *data, int value)
{
}
The callback may choose to ignore the data parameter.
This change allows callbacks to register a private data pointer along
with the function probe.
void mycallback(void *data, int value);
register_trace_mytracepoint(mycallback, mydata);
Then the mycallback() will receive the "mydata" as the first parameter
before the args.
A more detailed example:
DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
/* In the C file */
DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
[...]
trace_mytracepoint(status);
/* In a file registering this tracepoint */
int my_callback(void *data, int status)
{
struct my_struct my_data = data;
[...]
}
[...]
my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
init_my_data(my_data);
register_trace_mytracepoint(my_callback, my_data);
The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:
unregister_trace_mytracepoint(my_callback, my_data);
Because of the data parameter, tracepoints declared this way can not have
no args. That is:
DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());
will cause an error.
If no arguments are needed, a new macro can be used instead:
DECLARE_TRACE_NOARGS(mytracepoint);
Since there are no arguments, the proto and args fields are left out.
This is part of a series to make the tracepoint footprint smaller:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.
v5: Fixed net/core/drop_monitor.c to handle these updates.
v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
#ifdef CONFIG_TRACE_POINTS, since the two are the same in both
cases. The __DECLARE_TRACE() is what changes.
Thanks to Frederic Weisbecker for pointing this out.
v3: Made all register_* functions require data to be passed and
all callbacks to take a void * parameter as its first argument.
This makes the calling functions comply with C standards.
Also added more comments to the modifications of DECLARE_TRACE().
v2: Made the DECLARE_TRACE() have the ability to pass arguments
and added a new DECLARE_TRACE_NOARGS() for tracepoints that
do not need any arguments.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch creates a ftrace_event_class struct that event structs point to.
This class struct will be made to hold information to modify the
events. Currently the class struct only holds the events system name.
This patch slightly increases the size, but this change lays the ground work
of other changes to make the footprint of tracepoints smaller.
With 82 standard tracepoints, and 618 system call tracepoints
(two tracepoints per syscall: enter and exit):
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
This patch also cleans up some stale comments in ftrace.h.
v2: Fixed missing semi-colon in macro.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When I combined the nmi_watchdog (hardlockup) and softlockup code, I
also combined the paths the touch_watchdog and touch_nmi_watchdog took.
This may not be the best idea as pointed out by Frederic W., that the
touch_watchdog case probably should not reset the hardlockup count.
Therefore the patch below falls back to the previous idea of keeping
the touch_nmi_watchdog a superset of the touch_watchdog case.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-9-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This file migrated to kernel/watchdog.c and then combined with
kernel/softlockup.c. As a result kernel/nmi_watchdog.c is no longer
needed. Just remove it.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-5-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Now that is no longer compiled or used, just remove it.
Also move some of the code wrapped with DETECT_SOFTLOCKUP to the
LOCKUP_DETECTOR wrappers because that is the code that uses it now.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Just some code cleanup to make touch_softlockup clearer and remove the
softlockup_tick function as it is no longer needed.
Also remove the /proc softlockup_thres call as it has been changed to
watchdog_thres.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector. Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.
Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.
To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event. If that stops counting on a cpu, then the cpu is
most likely in trouble.
To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.
I tested this on x86_64 and both the softlockup and hardlockup paths
work.
V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events
V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions
V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes
V5:
- split apart warn flags for hard and soft lockups
TODO:
- figure out how to make an arch-agnostic clock2cycles call
(if possible) to feed into perf events as a sample period
[fweisbec: merged conflict patch]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When an interrupt is disabled and torn down, the CPU mask returned
through affinity_hint right now is all CPUs. Also, for drivers that
don't provide an affinity_hint mask, this can be misleading. There
should be no hint at all, meaning an empty CPU mask.
[ tglx: use zalloc_cpumask_var instead of clearing it under the lock ]
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: davem@davemloft.net
Cc: arjan@linux.jf.intel.com
Cc: bhutchings@solarflare.com
LKML-Reference: <20100505205638.5426.87189.stgit@ppwaskie-hc2.jf.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some callers (in memcontrol.c) calls css_is_ancestor() without
rcu_read_lock. Because css_is_ancestor() has to access RCU protected
data, it should be under rcu_read_lock().
This makes css_is_ancestor() itself does safe access to RCU protected
area. (At least, "root" can have refcnt==0 if it's not an ancestor of
"child". So, we need rcu_read_lock().)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo