Not having Rx hashing distribution enabled for an
interface is a valid configuration and shouldn't be
treated as an error.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ndo_start_xmit() returns a value of type netdev_tx_t. Update
our ndo function to use the correct type.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In dpni_get_irq_status(), status is both in and out parameter,
so initialize before use.
Issue found through static analysis tool.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make a couple of locally used functions and structures static.
Issue found through static analysis tool.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are mostly all IIO driver fixes, resolving a number of tiny
issues. There's also a ccree and lustre fix in here as well, both
fix problems found in those codebases.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWTz0Fg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yneTgCgvf05mecm4Hw98dGUXyaRUe0K578An1Ten4bh
sKVoFoxRlzQVF0KHUkQy
=pJOF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"These are mostly all IIO driver fixes, resolving a number of tiny
issues. There's also a ccree and lustre fix in here as well, both fix
problems found in those codebases.
All have been in linux-next with no reported issues"
* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ccree: fix buffer copy
staging/lustre/lov: remove set_fs() call from lov_getstripe()
staging: ccree: add CRYPTO dependency
iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
iio: light: ltr501 Fix interchanged als/ps register field
iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
iio: adc: max9611: Fix attribute measure unit
iio: adc: ti_am335x_adc: allocating too much in probe
iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
iio: proximity: as3935: fix iio_trigger_poll issue
iio: proximity: as3935: fix AS3935_INT mask
iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
iio: proximity: as3935: recalibrate RCO after resume
There's a Macro that checks if gcc supports a warning before
disabling it. Use it, in order to avoid warnings when building
with older gcc versions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function ‘rtw_cfg80211_add_monitor_if’:
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2670:10: error: ‘struct net_device’ has no member named ‘destructor’
mon_ndev->destructor = rtw_ndev_destructor;
^
Signed-off-by: David S. Miller <davem@davemloft.net>
The atomisp css2400/Makefile includes a Makefile.common:
include $(srctree)/$(src)/../Makefile.common
Well, this file doesn't exist at the Kernel tree :-)
So, don't include it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that HID core enforces serialization of transport driver open/close
calls we can remove custom locking from greybus hid driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init(). However, the release of these resources
can occur in one of two different places.
Either netdev_ops->ndo_uninit() or netdev->destructor().
The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.
netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.
netdev->destructor(), on the other hand, does not run until the
netdev references all go away.
Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().
This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.
If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit(). But
it is not able to invoke netdev->destructor().
This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.
However, this means that the resources that would normally be released
by netdev->destructor() will not be.
Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.
Many drivers do not try to deal with this, and instead we have leaks.
Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().
netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().
netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().
Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().
And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().
Signed-off-by: David S. Miller <davem@davemloft.net>
hmm_init calls hmm_alloc to set dummy_ptr, hmm_alloc calls
hmm_init when dummy_ptr is not yet set, which is the case in
the call from hmm_init, so it calls hmm_init again, this continues
until we have a stack overflow due to the recursion.
This commit fixes this by adding a separate flag for tracking if
hmm_init has been called. Not pretty, but it gets the job done,
eventually we should be able to remove the hmm_init call from
hmm_alloc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix "symbol 'xxxxxxx' was not declared. Should it be static?" sparse warnings.
Signed-off-by: Chen Guanqiao <chen.chenchacha@foxmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is no reason for all this printk spamming and certainly
not at an error log level.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As the existing comment in the driver indicates the sensor has only 1 pin,
but some boards may have 2 gpios defined and we toggle both as we we don't
know which one is the right one. However if the ACPI resources table
defines only 1 gpio (as expected) the gpio1_ctrl call will always fail,
causing the probing of the driver to file.
This commit ignore the return value of the gpio1_ctrl call, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add OVTI2680 ACPI id to ov2680 driver
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add INT0310 ACPI id to gc0310 driver
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
menu controls are not allowed to have a step size, set step to 0 to
fix an oops from the WARN_ON in v4l2_ctrl_new_custom() triggering
because of this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Do not call dev_warn with a NULL device, this silence the following 2
warnings:
[ 14.392194] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO
[ 14.392257] (NULL device *): Failed to find gmin variable gmin_V1P8GPIO
We could switch to using pr_warn for dev == NULL instead, but as comments
in the source indicate, the check for these 2 special gmin variables with
a NULL device is a workaround for 2 specific evaluation boards, so
completely silencing the missing warning for these actually is a good
thing.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
efivar_entry_get has certain alignment requirements and the atomisp
platform code was not honoring these, causing an oops by triggering the
WARN_ON in arch/x86/platform/efi/efi_64.c: virt_to_phys_or_null_size().
This commit fixes this by using the members of the efivar struct embedded
in the efivar_entry struct we kzalloc as arguments to efivar_entry_get(),
which is how all the other callers of efivar_entry_get() do this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Between the ISP2400 and ISP2401 code base this function moved file. The merge
of the drivers left us with two version in ifdefs. Resolve this down to a
single copy.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We won't be adding abstractions or moving them here so kill it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ISP2401 introduced a helper for this which we can use just as well on the
ISP2400 and remove some more noise differences.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
ISP2401 introduced a rather sensible change to cut through the structure
spaghetti. Adopt that for the ISP2400 as well. It makes no difference to the
actual code other than readability.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The ISP2401 version of this function returns a pointer to the buffer, whilst
the ISP2400 version returns a boolean if a slot is found. We can trivially
unify the code to use the ISP2401 version.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This define is never set and these code paths are never used so they can go
away.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The isp->inputs[] array has isp->input_cnt elements which have been
initialized so this > should be >=.
This bug is harmless. The check against ATOM_ISP_MAX_INPUTS prevents us
from reading beyond the end of the array. The uninitialized elements
are zeroed out so we will end up returning -EINVAL a few lines later
because the .camera pointer is NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The two drivers were machine merged and in this case the machine output was to
say the least not optimal.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
HRT_UNSCHED is never defined or set in the driver, so this is dead code that
can be retired, simplifying the code a bit further.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With the removal of the HAS_BL bootloader code the value of NUM_OF_BLS is an
invariant zero. So let's get rid of it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Kill off the HAS_BL define and the code and includes it brackets. We never
define HAS_BL or use that functionality.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a couple of sparse warnings:
drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:59:14: warning: symbol 'repool_pgnr' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:387:6: warning: symbol 'punit_ddr_dvfs_enable' was not declared. Should it be static?
Mark these symbols as static, so they are no longer incorrectly exported.
Signed-off-by: Juan Antonio Pedreira Martos <juanpm1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix warning issued by sparse: Using plain integer as NULL pointer
Signed-off-by: Paolo Cretaro <melko@frugalware.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix checkpatch warnings of prefered using '%s..", __func__' as function
name in a string
Signed-off-by: Christoph Fanelsa <eddi1983@gmx.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----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=+jBV
-----END PGP SIGNATURE-----
Merge tag 'media/v4.12-2' into patchwork
media fixes for v4.12-rc4
* tag 'media/v4.12-2': (598 commits)
[media] rc-core: race condition during ir_raw_event_register()
[media] cec: drop MEDIA_CEC_DEBUG
[media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
[media] cec: select CEC_CORE instead of depend on it
[media] rainshadow-cec: ensure exit_loop is intialized
[media] atomisp: don't treat warnings as errors
Linux 4.12-rc3
x86/ftrace: Make sure that ftrace trampolines are not RWX
x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
selftests/ftrace: Add a testcase for many kprobe events
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
ftrace: Fix memory leak in ftrace_graph_release()
ipv4: add reference counting to metrics
net: ethernet: ax88796: don't call free_irq without request_irq first
ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
sctp: fix ICMP processing if skb is non-linear
net: llc: add lock_sock in llc_ui_bind to avoid a race condition
PCI/msi: fix the pci_alloc_irq_vectors_affinity stub
blk-mq: Only register debugfs attributes for blk-mq queues
x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a bug where the copying of scatterlist buffers incorrectly
ignored bytes to skip in a scatterlist and ended 1 byte short.
This fixes testmgr hmac and hash test failures currently obscured
by hash import/export not being supported.
Fixes: abefd6741d ("staging: ccree: introduce CryptoCell HW driver").
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I have aligned argument with parenthesis, so checkpatch no check also.
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a space around logical symbol '|' to wipe out checkpatch check
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed checkpatch warning by adding a blank line after declare
expression
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noticed by FORTIFY_SOURCE, this swaps memcpy() for strncpy() to zero-value
fill the end of the buffer instead of over-reading a string from .rodata.
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
[kees: wrote commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wayne Porter <wporter82@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace cant with cannot, argumetns with arguments and
add line break to overly long DBG_871X statement.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver may sleep under a spin lock, and the function call path is:
rtsx_exclusive_enter_ss (acquire the lock by spin_lock)
rtsx_enter_ss
rtsx_power_off_card
xd_cleanup_work
xd_delay_write
xd_finish_write
xd_copy_page
wait_timeout
schedule_timeout --> may sleep
To fix it, "wait_timeout" is replaced with mdelay in xd_copy_page.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the default screen resolution and also use 24bpp for a better
screen performance.
Tested-by: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lirc_zilog driver is the last remaining lirc driver, so the existing
todo is no longer relevant.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix all checkpatch reported issues for:
* CHECK: "braces {} should be used on all arms of this statement".
* CHECK: "Unbalanced braces around else statement".
Make sure all if/else statements are balanced in terms of braces. Most
cases in code are, but a few were left unbalanced, so put them all
consistent with the recommended style.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix all checkpatch reported issues for "CHECK: Prefer
kzalloc(sizeof(*<p>)...) over kzalloc(sizeof(struct <P>)...)".
Other similar case in the code already using recommended style, so make
it all consistent with the recommended practice.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix all checkpatch reported issues for "CHECK: Prefer using '"%s...",
__func__' to using '<func_name>', ..."
Use recommended style. Additionally, __func__ was already used in
similar cases throughout the code, so make it all consistent.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix all checkpatch reported issues for "CHECK: Comparison to NULL could
be written...".
Do these comparisons using the recommended coding style and consistent
with other similar cases in the file, which already used the recommended
way.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix style issues reported by checkpatch, affecting whitespace only:
* CHECK: "Please don't use multiple blank lines".
Two of these still triggering and left untouched because used for
separating logical blocks (vars from functions, etc.).
* CHECK: "spaces preferred around that '<operator>'".
All fixed.
* CHECK: "Alignment should match open parenthesis".
All fixed except one on line 1161, left untouched for readability.
Move towards recommended coding style without compromising readability.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Always let the kernel decide what minor the lirc chardev gets.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are no drivers which use this functionality.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drv->set_use_inc and drv->set_use_dec are already optional so we can
remove all dummy functions.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several atomisp files use:
ccflags-y += -Werror
As, on media, our usual procedure is to use W=1, and atomisp
has *a lot* of warnings with such flag enabled,like:
./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=]
At the end, it causes our build to fail, impacting our workflow.
So, remove this crap. If one wants to force -Werror, he
can still build with it enabled by passing a parameter to
make.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Trivial fix to spelling mistake in SSI_LOG_ERR message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found one more spelling mistake in a DBG_8192C debug message,
replace "avaliable" with "available", add some spacing between
text and a number and split overly long line
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpoint.pl warning:
WARNING: line over 80 characters
Signed-off-by: Konrad Malkowski <konrad.malkowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed coding style issue where trailing */ in block comments
were not on separate lines.
Signed-off-by: Elias Carter <edcarter@ualberta.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove definitions of descriptor context which are not used
in the driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cipher code had some left overs of an attempt to support
synch. cipher API with the HW. Remove the code handling this.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hash code had some left overs from a misguided attempt
to support shash API with the HW. Remove the code handling
this.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the register definition files had none
kernel coding style usage of tabs vs. spaces in macro
definitions. This patch fixes them.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MSB64 macro is no longer used or needed. Drop it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hash enum were named using CamelCase, move over to snake_case.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct SepHashPrivateContext is not used anywhere in the code.
Remove it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With all users removed or re-factored to use the standard
kernel bit fields ops we can now drop the custom
bit field macros.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
request_mgr was using custom bit field macros. move over to
standard kernel bitfield ops.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ccree driver had support for rough performance debugging
via cycle counting which has bit rotted and can easily be
replcaed with perf. Remove it from the driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DUMP_SGL() and DUMP_MLLI_TABLE() debug macros were
defined but not used anywhere and the difference of their
definitions for debug vs. none debug indicated this has
not being used in a while.
Remove the dead code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A bunch of macros used to define M/LLI descriptors where
being defined in the C file. Move them over to private
include file where other relevant definitions are stored.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linked List Item descriptors were being programmed via
a set of macros which suffer a few problems:
- Use of macros rather than inline leaves out parameter type
checking and risks multiple macro parameter evaluation side
effects.
- Implemented via hand rolled versions of bitfield operations.
This patch refactors LLI programming into a set of
of inline functions using generic kernel bitfield access
infrastructure, thus resolving the above issues and opening
the way later on to drop the hand rolled bitfield macros
once additional users are dropped in later patches in the
series.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove no longer needed code used to simulate 48 bit dma addresses
on 32 bit platforms for development purposes.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The programming of the HW command FIFO in ccree was done via
a set of macros which suffer a few problems:
- Use of macros rather than inline leaves out parameter type
checking and risks multiple macro parameter evaluation side
effects.
- Implemented via hand rolled versions of bitfield operations.
This patch refactors the HW command queue access into a set
of inline functions using generic kernel bitfield access
infrastructure, thus resolving the above issues and opening
the way later on to drop the hand rolled bitfield macros
once additional users are dropped in later patches in the
series.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC_CTX_SIZE was being defined using a hand rolled bit shift operation.
Replace with use of BIT macro.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver may sleep under a spin lock, and the function call path is:
rtsx_exclusive_enter_ss (acquire the lock by spin_lock)
rtsx_enter_ss
rtsx_power_off_card
sd_cleanup_work
sd_stop_seq_mode
sd_switch_clock
sd_ddr_tuning
sd_ddr_pre_tuning_tx
sd_change_phase
wait_timeout
schedule_timeout --> may sleep
To fix it, "wait_timeout" is replaced with mdelay in sd_change_phase.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver may sleep under a spin lock, and the function call path is:
rtsx_exclusive_enter_ss (acquire the lock by spin_lock)
rtsx_enter_ss
rtsx_power_off_card
sd_power_off_card3v3
wait_timeout
schedule_timeout --> may sleep
To fix it, "wait_timeout" is replaced with mdelay in sd_power_off_card3v3.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few of the comments in cc_crypto_ctx.h where not formatted
correctly. Format according to coding style guidelines.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clip longer than 80 chars lines in header files worked
on in the patch set.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in gdm_usb.c:
WARNING: suspect code indent for conditional statements (8, 12)
Signed-off-by: Mart Lubbers <mart@martlubbers.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This problem was found by strace ioctl list generator.
Fixes: 15c6098cfe ("staging: android: ion: Remove ion_handle and ion_client")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In spk_ttyio_release we read tty's index but never do anything with it.
The patch removes this dead code.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should check the flush_buffer method of a tty for null before
invoking it. Some drivers such as usbserial don't implement
flush_buffer. This will be required for upcoming patches where we expand
spk_ttyio to support more than just ttyS*.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lib-move.c file has a lot of expressions in the form of:
v = le[32|64]_to_cpu(v);
This caused a lot of sparse warnings.
Replaced with:
le[32|64]_to_cpus(&v);
Signed-off-by: Nikola Jelic <nikola.jelic83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Temporary variable is used only as __be32, for both assignments and reads,
but the type is inconsistent (__u32).
Signed-off-by: Nikola Jelic <nikola.jelic83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sockaddr_in.sin_addr.s_addr is __be32 integral type, so the (__force u32)
cast after the htonl call is unnecessary, and also detected by sparse:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c:2309:33: warning: incorrect type in assignment (different base types)
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c:2381:30: warning: incorrect type in assignment (different base types)
Signed-off-by: Nikola Jelic <nikola.jelic83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduces a local var to collect flags and convert
them to le32.
Fixes the following sparse warnings:
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2305:23: warning: invalid assignment: |=
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2305:23: left side has type restricted __le32
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2305:23: right side has type int
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2383:39: warning: invalid assignment: |=
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2383:39: left side has type restricted __le32
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2383:39: right side has type int
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the helper functions used to implement "dump_granted_max" in
debugfs.
Replace the lprocfs_rd_uint() and lprocfs_wr_uint() generic callbacks
with a simpler, more direct implementation of ldlm_rw_uint_fops.
There's a slight change in lustre debugfs write semantics: Using kstrtox
causes EINVAL when the written number is followed by other (garbage)
characters, whereas previously the garbage would be ignored and such a
write would succeed.
Signed-off-by: Mathias Rav <mathiasrav@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpoint.pl warning:
WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to
printk_ratelimit
Signed-off-by: Konrad Malkowski <konrad.malkowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lov_getstripe() calls set_fs(KERNEL_DS) so that it can handle a struct
lov_user_md pointer from user- or kernel-space. This changes the
behavior of copy_from_user() on SPARC and may result in a misaligned
access exception which in turn oopses the kernel. In fact the
relevant argument to lov_getstripe() is never called with a
kernel-space pointer and so changing the address limits is unnecessary
and so we remove the calls to save, set, and restore the address
limits.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/6150
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3221
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Li Wei <wei.g.li@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of drivers are providing their own ->cmdfunc(), and most of the
time this implementation does not support all possible NAND operations.
But since ->cmdfunc() cannot return an error code, the core has no way
to know that the operation it requested is not supported.
This is a problem we cannot address for all kind of operations with the
current design, but we can prevent these silent failures for the
GET/SET FEATURES operation by overloading the default
->onfi_{set,get}_features() methods with one returning -ENOTSUPP.
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
This replaces all remaining BUG_ON with WARN_ON. So in case of
a VCHIQ bug the system is still usable.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly handle the error case in case of an invalid tx_pos.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bail out properly if the process index doesn't match the remote insert.
We also drop the BUG in case the process index is at local insert,
so we can trigger the WARN_ON again some steps later.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the ref counter of service has an unexpected value then we better
bail out.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the unlikely case that service is NULL we should bail out instead
of calling BUG_ON(). The other BUG_ON calls will be fixed in separate
patches.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VCHIQ suspend and resume isn't implemented, but even it was
there is no need to call BUG().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case VCHIQ state is already initialized we need to bailout
in order to aovid a memory leak.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the ARM side of VCHIQ support only 1 state, we could simplify
the init code. This makes it possible to avoid BUG_ON and a theoretical
overflow of id.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the PAGE_MASK instead of open code it.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case vmalloc_to_page returns NULL create_pagelist must abort
imediatly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assuming the intension of the function is to clean up, so fix the function
name accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reduce the indentation within vchiq_dump_service_use_state in order
to avoid a multiline derefernce.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comment was apparently forgotten in the correction of CamelCase.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable slot_mem_size is assigned a value which is never used.
This issue has been found by CppCheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can reduce the scope of the counting variable i. This has
been found by CppCheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of saving the return value of mutex_lock_killable in a
local variable we could use the value directly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes multiple comparison to NULL checkpatch errors by
rewriting the conditional as a negation.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a checkpatch issue caused by using function
names inside strings. Those function names were replaced by
__func__.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch solves a checkpatch issue caused by not using spaces
around an OR sign.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds * on block comments subsequent lines, which were
causing a checkpatch styling warning.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes some checkpatch errors in which comments go over
80 characters per line.
Signed-off-by: Juliana Rodrigues <juliana.orod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comparisons should place the constant on the right side of the test
This patch fixes coding style issues as reported by checkpatch.
Signed-off-by: Szilveszter Székely <szekelyszilv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WRIOP hardware may need to write to the hardware annotation
area of Tx buffers (e.g. frame status bits) and also to
the data area (e.g. L4 checksum in frame header).
Map these buffers as DMA_BIDIRECTIONAL, otherwise the
write transaction through SMMU will not be allowed.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the correct mechanisms for translating a DMA-mapped IOVA
address into a virtual one. Without this fix, once SMMU is
enabled on Layerscape platforms, the Ethernet driver throws
IOMMU translation faults.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a missing blank line issue reported by checkpatch.pl
Signed-off-by: Marko Stankovic <dartnorris@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were several in-place conversions of 16 and 32-bit data, which caused
sparse to detect them. Changed them to the in situ versions, such as:
le16_to_cpu -> le16_to_cpus
Signed-off-by: Nikola Jelic <nikola.jelic83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two entirely new drivers in here plus the usual range of cleanups and features.
New device support
* ad5064
- add ltc2631, ltc2633 and ltc2635 support.
* bma180
- trivial support for bma250e (new id)
* hid-sensor-rotation
- add relative orientation and geometric orientation support.
* isl29028
- add isl29030 support (its effectively the same part from a driver point of
view)
* maxim_thermocouple
- add max31856 id.
* meson-saradc
- add meson8b SoC adc support.
* ti-adc084s021
- new driver and bindings.
* ti-adc108s102
- new driver and bindings.
Staging graduations
* isl29028
Features
* bma180
- ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
- add raw access rather than only events.
* hid-sensor-hub
- Implement batch mode in which we can set a threshold on the amount of time
between data coming from the fifos. This is the first device to do this
rather than use a watershed on the number of samples.
* hts221
- power management support
* lsm6dsx
- add system power management support.
* rpr0521
- sampling frequency read / write
* stm32-trigger
- add support for TRG02 triggers.
* tsl2583
- runtime power management support.
Cleanups
* core
- inkern: fix a double unlock in iio_read_available_channel_raw when raw
value doesn't appear to be raw (error path).
- fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
- fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
- use local include/uapi headers to ensure always up to date.
- increase length of allowed trigger names.
* ad9834
- symbolic to octal permissions.
* ade7753
- symbolic to octal permissions.
- fix indentation
* ade7754
- symbolic to octal permissions.
* ade7758
- symbolic to octal permissions.
- ade7854
- symbolic to octal permissions.
* as3935
- move out of storm check to given consistent results for raw and processed
values.
* bmp280
- fix bme280 naming in Kconfig help.
* hi8435
- avoid garbage on event after enable.
- add missing in_voltage_sensing_mode_available to list possible enum options.
- handle the reset gpio with the obvious polarity rather than relying on
DT to provide it correctly.
* hid-sensors
- fix a wrong error path scrubbing of return values.
* hid-sensors-accel
- drop static on a local variable
* hid-sensors-rotation
- Add missing scale and offset property parsing support.
* ina2xx
- Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
- only declare the ACPI table when ACPI is enabled.
* isl29028
- fix proximity sleep times.
* lsm6dsx
- replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
dealing with the various PM config variables.
* meson-saradc
- mark meson_sar_adc_data static and const.
* rcar-gyroadc
- derive the interface clock speed from the fck clock on the basis they are
the same actual clock.
- drop the now unused if clock from the bindings.
* rpr0521
- disable sensor when marked as such rather than always enabling it.
- poweroff if probe fails and we can talk to device.
- make sure device powered off when it doesn't need to be on.
- use sizeof rather than hardcoded size on value read.
- whitespace fixup.
- reorder channel numbers ready for buffered support which didn't quite
make this pull request.
* st-accel
- fix platform data initialization to allow remove and reprobe.
* st-pressure
- fix platform data initialization to allow remove and reprobe.
* tsl2x7x
- S_IRUGO, S_IWUSR to octal values
- rename driver for consistency with more recent drivers
- drop FSF mailing address
- replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
relevant function renames.
* zpa2326
- report an error for consistency with other error paths.
-----BEGIN PGP SIGNATURE-----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=XLVY
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.13 cycle
Two entirely new drivers in here plus the usual range of cleanups and features.
New device support
* ad5064
- add ltc2631, ltc2633 and ltc2635 support.
* bma180
- trivial support for bma250e (new id)
* hid-sensor-rotation
- add relative orientation and geometric orientation support.
* isl29028
- add isl29030 support (its effectively the same part from a driver point of
view)
* maxim_thermocouple
- add max31856 id.
* meson-saradc
- add meson8b SoC adc support.
* ti-adc084s021
- new driver and bindings.
* ti-adc108s102
- new driver and bindings.
Staging graduations
* isl29028
Features
* bma180
- ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
- add raw access rather than only events.
* hid-sensor-hub
- Implement batch mode in which we can set a threshold on the amount of time
between data coming from the fifos. This is the first device to do this
rather than use a watershed on the number of samples.
* hts221
- power management support
* lsm6dsx
- add system power management support.
* rpr0521
- sampling frequency read / write
* stm32-trigger
- add support for TRG02 triggers.
* tsl2583
- runtime power management support.
Cleanups
* core
- inkern: fix a double unlock in iio_read_available_channel_raw when raw
value doesn't appear to be raw (error path).
- fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
- fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
- use local include/uapi headers to ensure always up to date.
- increase length of allowed trigger names.
* ad9834
- symbolic to octal permissions.
* ade7753
- symbolic to octal permissions.
- fix indentation
* ade7754
- symbolic to octal permissions.
* ade7758
- symbolic to octal permissions.
- ade7854
- symbolic to octal permissions.
* as3935
- move out of storm check to given consistent results for raw and processed
values.
* bmp280
- fix bme280 naming in Kconfig help.
* hi8435
- avoid garbage on event after enable.
- add missing in_voltage_sensing_mode_available to list possible enum options.
- handle the reset gpio with the obvious polarity rather than relying on
DT to provide it correctly.
* hid-sensors
- fix a wrong error path scrubbing of return values.
* hid-sensors-accel
- drop static on a local variable
* hid-sensors-rotation
- Add missing scale and offset property parsing support.
* ina2xx
- Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
- only declare the ACPI table when ACPI is enabled.
* isl29028
- fix proximity sleep times.
* lsm6dsx
- replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
dealing with the various PM config variables.
* meson-saradc
- mark meson_sar_adc_data static and const.
* rcar-gyroadc
- derive the interface clock speed from the fck clock on the basis they are
the same actual clock.
- drop the now unused if clock from the bindings.
* rpr0521
- disable sensor when marked as such rather than always enabling it.
- poweroff if probe fails and we can talk to device.
- make sure device powered off when it doesn't need to be on.
- use sizeof rather than hardcoded size on value read.
- whitespace fixup.
- reorder channel numbers ready for buffered support which didn't quite
make this pull request.
* st-accel
- fix platform data initialization to allow remove and reprobe.
* st-pressure
- fix platform data initialization to allow remove and reprobe.
* tsl2x7x
- S_IRUGO, S_IWUSR to octal values
- rename driver for consistency with more recent drivers
- drop FSF mailing address
- replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
relevant function renames.
* zpa2326
- report an error for consistency with other error paths.
ad7152_write_raw_samp_freq() is called by ad7152_write_raw() with
chip->state_lock held. So, there is unavoidable deadlock when
ad7152_write_raw_samp_freq() locks the mutex itself.
The patch removes unneeded locking.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 6572389bcc ("staging: iio: cdc: ad7152: Implement
IIO_CHAN_INFO_SAMP_FREQ attribute")
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Now that the indirect-PCM transfer helper gives back an error, we
should return the error from ack callbacks.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to the coding-style documentation, functions in source files
should be separated with one blank line. Redundant blank lines were
removed from this source file, in accordance with coding-style
documentation.
Signed-off-by: Aliza Minkov <minkov.al@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alignment styles are used interchangeably, align parameters to open
parenthesis and fix issues reported by checkpatch.pl
Signed-off-by: Marko Stankovic <dartnorris@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the spk_ttyio.c file which fixes up the indent error
reported by the checkpatch.pl tool.
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch issue by adding spaces around the '%' operator
Signed-off-by: Marko Stankovic <dartnorris@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix warning issued by sparse:
symbol 'ion_device_create' was not declared. Should it be static?
Signed-off-by: Paolo Cretaro <melko@frugalware.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On most of the common arches char is signed so it can't ever == 0xff.
Let's fix this by making it a u8.
Fixes: 6b9ad1c742 ("staging: speakup: add send_xchar, tiocmset and input functionality for tty")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed a check for physaddr=0 in handle_command() function in
visorchipset.c.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added a comment to explain polling frequency variation logic in
controlvm_periodic_logic() in visorchipset.c.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renamed structure spar_io_channel_protocol to visor_io_channel and
changed "visor bus" to "visorbus" in a comment in visornic_main.c
and visorhba_main.c.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renamed #defines
* ULTRA_CHANNEL_PROTOCOL_SIGNATURE to
VISOR_CHANNEL_SIGNATURE
* SPAR_CHANNEL_SERVER_READY to
VISOR_CHANNEL_SERVER_READY
* ULTRA_VALID_CHANNELCLI_TRANSITION
VISOR_VALID_CHANNELCLI_TRANSITION
* ULTRA_CLIERRORBOOT_THROTTLEMSG_DISABLED to
VISOR_CLIERRORBOOT_THROTTLEMSG_DISABLED
* ULTRA_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED to
VISOR_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED
* ULTRA_CLIERRORBOOT_THROTTLEMSG_BUSY to
VISOR_CLIERRORBOOT_THROTTLEMSG_BUSY
* ULTRA_IO_DRIVER_ENABLES_INTS to
VISOR_DRIVER_ENABLES_INTS
* ULTRA_IO_CHANNEL_IS_POLLING to
VISOR_CHANNEL_IS_POLLING
* ULTRA_IO_IOVM_IS_OK_WITH_DRIVER_DISABLING_INTS to
VISOR_IOVM_OK_DRIVER_DISABLING_INTS
* ULTRA_IO_DRIVER_DISABLES_INTS to
VISOR_DRIVER_DISABLES_INTS
* ULTRA_IO_DRIVER_SUPPORTS_ENHANCED_RCVBUF_CHECKING to
VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING
* ULTRA_CHANNEL_ENABLE_INTS to
VISOR_CHANNEL_ENABLE_INTS
* SPAR_VHBA_CHANNEL_PROTOCOL_UUID to VISOR_VHBA_CHANNEL_UUID
* SPAR_VHBA_CHANNEL_PROTOCOL_UUID_STR to
VISOR_VHBA_CHANNEL_UUID_STR
* SPAR_VNIC_CHANNEL_PROTOCOL_UUID to VISOR_VNIC_CHANNEL_UUID
* SPAR_VNIC_CHANNEL_PROTOCOL_UUID_STR to
VISOR_VNIC_CHANNEL_UUID_STR
* SPAR_SIOVM_UUID to VISOR_SIOVM_UUID
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed enum ultra_inputaction in ultrainputreport.h and changed
elements to #defnes.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renamed enum and its members
* ultra_chipset_feature to visor_chipset_feature
* ULTRA_CHIPSET_FEATURE_REPLY to VISOR_CHIPSET_FEATURE_REPLY
* ULTRA_CHIPSET_FEATURE_PARA_HOTPLUG to
VISOR_CHIPSET_FEATURE_PARA_HOTPLUG
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renamed the functions bus_create() to visorbus_create(),
bus_destroy() to visorbus_destroy() and bus_configure() to
visorbus_configure
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames enum crash_obj_type typ to cr_type.
Signed-off-by: Jon Frisch <jon.frisch@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a layering violation so we replace it with calls to
sg_page. This is a prep patch for replacing page_link and this
is one of the very few uses outside of scatterlist.h.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A rare randconfig build error shows up when we have CONFIG_CRYPTO=m
in combination with a built-in CCREE driver:
crypto/hmac.o: In function `hmac_update':
hmac.c:(.text.hmac_update+0x28): undefined reference to `crypto_shash_update'
crypto/hmac.o: In function `hmac_setkey':
hmac.c:(.text.hmac_setkey+0x90): undefined reference to `crypto_shash_digest'
hmac.c:(.text.hmac_setkey+0x154): undefined reference to `crypto_shash_update'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_setkey':
ssi_cipher.c:(.text.ssi_blkcipher_setkey+0x350): undefined reference to `crypto_shash_digest'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_exit':
ssi_cipher.c:(.text.ssi_blkcipher_exit+0xd4): undefined reference to `crypto_destroy_tfm'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_blkcipher_init':
ssi_cipher.c:(.text.ssi_blkcipher_init+0x1b0): undefined reference to `crypto_alloc_shash'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_free':
ssi_cipher.c:(.text.ssi_ablkcipher_free+0x48): undefined reference to `crypto_unregister_alg'
drivers/staging/ccree/ssi_cipher.o: In function `ssi_ablkcipher_alloc':
ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x138): undefined reference to `crypto_register_alg'
ssi_cipher.c:(.text.ssi_ablkcipher_alloc+0x274): undefined reference to `crypto_blkcipher_type'
We actually need to depend on both CRYPTO and CRYPTO_HW here to avoid the
problem, since CRYPTO_HW is a bool symbol and by itself that does not
force CCREE to be a loadable module when the core cryto support is modular.
Fixes: 50cfbbb7e6 ("staging: ccree: add ahash support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the following checkpatch.pl warnings:
octal permissions are more preferable than symbolic permissions
Replaced DEVICE_ATTR family macros with DEVICE_ATTR_RW family
as suggested by Greg K-H. Changed attributes and function
names where ever required to satisfy internal macro definitions
like __ATTR__RW().
Signed-off-by: Surender Polsani <surenderpolsani@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The atomisp currently produce hundreds of warnings when W=1.
It is a known fact that this driver is currently in bad
shape, and there are lot of things to be done here.
We don't want to be bothered by those "minor" stuff for now,
while the driver doesn't receive a major cleanup. So,
disable those warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is a patch to the atomisp_tpg.c file that fixes up a missing
blank line warning found by the checkpatch.pl tool
Signed-off-by: Manny Vindiola <mannyv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We're putting the NUL terminators one space beyond where they belong.
This doesn't show up in testing because all but the callers put a NUL in
the correct place themselves. LOL. It causes a static checker warning
about buffer overflows.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We should verify that "ix < max_len" before we test whether we have
reached the NUL terminator.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With gcc-7.1.1 I was getting the following compile error:
error: ‘*’ in boolean context, suggest ‘&&’ instead
The problem is the definition of CEIL_DIV:
#define CEIL_DIV(a, b) ((b) ? ((a) + (b) - 1) / (b) : 0)
Which when called as: CEIL_DIV(x, y * z) triggers this error, note
we cannot do as the error suggests since b is evaluated multiple times.
This commit fixes these compile errors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix sparse warnings: "symbol not declared; should it be static?"
Signed-off-by: Guru Das Srinagesh <gurooodas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix for error (not warnings) reported by checkpatch.pl
Specifically:
- missing whitespace around "=" and after ","
- indentation with spaces instead of tabs
- lines starting with a whitespace
This patch does not affect the compiled code in any way.
Signed-off-by: Avraham Shukron <avraham.shukron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixes a sparse warning:
drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c:35:5: warning: symbol 'qos' was not declared. Should it be static?
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enabling the arche platform for compile testing showed a harmless
warning with CONFIG_PM=n:
drivers/staging/greybus/arche-platform.c:632:12: error: 'arche_platform_resume' defined but not used [-Werror=unused-function]
drivers/staging/greybus/arche-platform.c:618:12: error: 'arche_platform_suspend' defined but not used [-Werror=unused-function]
This marks the functions as __maybe_unused to shut up the warnings.
Fixes: 2eccd4aa19 ("staging: greybus: enable compile testing of arche driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the duplicated sg table is freed in the detach() and
the error path of map_dma_buf() ion's dma_buf_ops.
If a call to dma_buf_map_attachment() fails, the importer is
expected to call dma_buf_detach() to remove the attachment. This
will result in us trying to free the duped sg table twice.
Don't call free_duped_table() in ion_map_dma_buf() to avoid this.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The flag ION_FLAG_CACHED_NEEDS_SYNC isn't used anymore. Remove it.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few members in ion_buffer struct are unused after features
like page faulting, ion_handle and ion_client were removed.
Remove these members and the leftover references to them.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase variable name with underscores to comply
with the standard kernel coding style.
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix style in rxtx.c, removing extra empty blank lines.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix style in rxtx.c, breaking all multiple assignments in different
lines.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch breaks lines that are longer than 80 characters and joins
together those, that are too short and can be placed at one.
Function calls and declarations are updated to fit kernel code style.
Signed-off-by: Matej Dujava <mdujava@kocurkovo.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several atomisp files use:
ccflags-y += -Werror
As, on media, our usual procedure is to use W=1, and atomisp
has *a lot* of warnings with such flag enabled,like:
./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=]
At the end, it causes our build to fail, impacting our workflow.
So, remove this crap. If one wants to force -Werror, he
can still build with it enabled by passing a parameter to
make.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The i2c functions need to test the pm_suspend state and do, if needed, some
retry before i2c operations. This code was repeated 4x.
To isolate this, create a new function to check suspend state and call it in
every need place.
As at it, move the error message from pr_err to dev_err.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Yueyao Zhu <yueyao.zhu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix reset of i2c_busy flag if an error occurs during the i2c block read.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Yueyao Zhu <yueyao.zhu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue where TTY-migrated synths would take a while
to shut up after hitting numpad enter key. When calling synth_flush,
even though XOFF character is sent as high priority, data buffered in
TTY layer is still sent to the synth. This patch flushes that buffered
data when synth_flush is called.
It also tries to ensure that hardware flow control is enabled, by
setting CRTSCTS using tty's termios.
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simply uses the changes introduced in previous patches and migrates
apollo, ltlk, audptr, decext, spkout and dectlk. Migrations are straightforward
function pointer updates.
Signed-off by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds further TTY-based functionality, specifically implementation
of send_xchar and tiocmset methods, and input. send_xchar and tiocmset
methods simply delegate to corresponding TTY operations.
For input, it implements the receive_buf2 callback in tty_ldisc_ops of
speakup's ldisc. If a synth defines read_buff_add method then receive_buf2
simply delegates to that and returns.
For spk_ttyio_in, the data is passed from receive_buf2 thread to
spk_ttyio_in thread through spk_ldisc_data structure. It has following
members:
- char buf: represents data received
- struct semaphore sem: used to signal to spk_ttyio_in thread that data
is available to be read without having to busy wait
- bool buf_free: this is used in comination with mb() calls to syncronise
the two threads over buf
receive_buf2 only writes to buf if buf_free is true. The check for buf_free
and writing to buf are separated by mb() to ensure that spk_ttyio_in has read
buf before receive_buf2 writes to it. After writing, it ups the semaphore to
signal to spk_ttyio_in that there is now data to read.
spk_ttyio_in waits for data to read by downing the semaphore. Thus when
signalled by receive_buf2 thread above, it reads from buf and sets buf_free
to true. These two operations are separated by mb() to ensure that
receive_buf2 thread finds buf_free to be true only after buf has been read.
After that spk_ttyio_in calls tty_schedule_flip for subsequent data to come
in through receive_buf2.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This changes the above five synths to TTY-based comms. They were chosen as a
first pass because their serial comms are straightforward, i.e. they don't use
serial input and don't do internal port knocking.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds spk_ttyio.c file. It contains a set of functions which implement
those methods in spk_synth struct which relate to sending bytes out using
serial comms. Implementations in this file perform the same function but
using TTY subsystem instead. Currently synths access serial ports, directly
poking standard ISA ports by trying to steal them from serial driver. Some ISA
cards actually need this way of doing it, but most other synthesizers don't,
and can actually work by using the proper TTY subsystem through a new N_SPEAKUP
line discipline. So this adds the methods for drivers to switch to accessing
serial ports through the TTY subsystem, whenever appropriate.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-remove duplicate tty allocation code for serial and printer drivers.
-add missing tty c_ispeed and c_ospeed initialization to 9600.
-fix sparse warning: too long initializer-string for array of char.
This patch was only unit tested due to lack of the actual hardware.
Signed-off-by: Haim Daniel <haimdaniel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a 'code indent should use tabs where possible' checkpatch code
style error by changing whitespace into tabs.
Signed-off-by: Remco Verhoef <remco@dutchcoders.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the BIT(n) macro instead of '(1 << n)' in definitions where the bit
semantics clearly applies.
Fixes true positive "Prefer using the BIT macro" checks reported by
checkpatch.
Some of these checks are still triggering on definitions using
'(1 << n)', namely for PIO2_CNTR_SC_DEV1, PIO2_CNTR_RW_LSB and
PIO2_CNTR_MODE1. Leave them be, as the context there is more of a
"multi-bit field value" ((val << n), where for some cases 'val' happens
to be 1) rather than a "single bit" (1 << n), so keeping the value as is
in the code makes it more readable that using a combination of BIT
macros.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase local variables' name with underscores to comply
with the standard kernel coding style.
Changed:
- LinkSpeed
- TransmittedFrameCount
- ReceivedFragmentCount
- FailedCount
- FCSErrorCount
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing 'checkpatch.pl' ERROR: code indent should use tabs where possible
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Arche platform-driver config option and allow the driver to be
compile tested also without the out-of-tree usb3613 driver.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the remaining timesync bits that were left in the arche platform
driver and which prevented the driver from being compiled.
Fixes: bdfb95c4ba ("staging: greybus: remove timesync protocol support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This kinda reports this as if it was an error message.
Now that bssid is reported at associate remove this piece of code
serves no purpose as there is no code for peers so remove it.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User cannot tell which mac address(BSIDD) associated with so add
this to info message.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The flag status of bCurBW40MHz is printed as info and is
only useful as debug message.
Replace with netdev_dbg in line with rest of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alg name will be printed a number times during a connection it
is only really useful as a debug message.
Change to netdev_dbg.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RX will receive countless EAPOL frames over the life of the connection.
A number of conditional calls to rtllib_is_eapol_frame are made in this function.
So this call serves no purpose other than to spam logs with false warning that
it is indeed a EAPOL frame, remove it.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing recommendation from checkpatch.pl:
"CHECK: Alignment should match open parenthesis"
Signed-off-by: Brett Hitchcock <bretth256@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mk16_le() is an inline function returning le16_to_cpu()
which is causing type mismatch warnings. Removed Mk16_le() and
replaced it with le16_to_cpu() with appropriate argument type as
suggested by Greg K-H.
Signed-off-by: Suniel Mahesh <suniel.spartan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warnings:
WARNING: function definition argument 'struct vnt_private *' should also have an identifier name
+void CARDvSetRSPINF(struct vnt_private *, u8);
Identifiers priv and bb_type, added to CARDvSetRSPINF definition,
are the names used in the function declaration.
Signed-off-by: Sucha Supittayapornpong <sucha.cpe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix several sparse warnings about casts to restricted
little-endian by using in situ conversions.
Signed-off-by: Thibaut SAUTEREAU <thibaut.sautereau@telecom-sudparis.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch message:
WARNING: line over 80 characters
Change "bit mask" for "bitmask" to have a line shorter than 80 characters.
Signed-off-by: Michael Mera <dev@michaelmera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl "WARNING: Block comments should align the * on each line"
Signed-off-by: Tiago Koji Castro Shibata <tiago.shibata@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
