In ocfs2_xattr_set(), if ocfs2_start_trans failed, meta_ac and data_ac
should be free. Otherwise, It would lead to a memory leak.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_xattr_value_attach_refcount(), if error occurs when calling
ocfs2_xattr_get_clusters(), it will go with unexpected behavior since
local variables p_cluster, num_clusters and ext_flags are declared without
initialization.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't
done well when reflink. For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But
for inode with data extent record, its record count isn't adjusted. Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.
One panic caused by this bug in our test environment is the following:
kernel BUG at fs/ocfs2/xattr.c:1435!
invalid opcode: 0000 [#1] SMP
Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
RSP: e02b:ffff88007a587948 EFLAGS: 00010283
RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process multi_reflink_t
Call Trace:
ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
ocfs2_xa_set+0xcc/0x250 [ocfs2]
ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
__ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
generic_setxattr+0x70/0x90
__vfs_setxattr_noperm+0x80/0x1a0
vfs_setxattr+0xa9/0xb0
setxattr+0xc3/0x120
sys_fsetxattr+0xa8/0xd0
system_call_fastpath+0x16/0x1b
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove
here.
[akpm@linux-foundation.org: remove unused local]
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed. As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.
Note this was introduced by 9d8f13ba3 ("security: new
security_inode_init_security API adds function callback")
To reproduce:
set default ACL for the parent dir(ocfs2 in this case):
$ setfacl -m default:user:jeff:rwx ../ocfs2/
$ getfacl ../ocfs2/
# file: ../ocfs2/
# owner: jeff
# group: jeff
user::rwx
group::r-x
other::r-x
default:user::rwx
default:user:jeff:rwx
default:group::r-x
default😷:rwx
default:other::r-x
$ touch a
$ getfacl a
# file: a
# owner: jeff
# group: jeff
user::rw-
group::rw-
other::r--
Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:
$ ./ocfs2_reflink a b
$ getfacl b
# file: b
# owner: jeff
# group: jeff
user::rw-
group::rw-
other::r--
In this case, the end user can also observed an error message at syslog:
(ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0
After applying this patch, create reflink file c from a:
$ ./ocfs2_reflink a c
$ getfacl c
# file: c
# owner: jeff
# group: jeff
user::rw-
user:jeff:rwx #effective:rw-
group::r-x #effective:r--
mask::rw-
other::r--
Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
static int
reflink_file(char const *src_name, char const *dst_name,
bool preserve_attrs)
{
int fd;
#ifndef REFLINK_ATTR_NONE
# define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
# define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
struct reflink_arguments {
uint64_t old_path;
uint64_t new_path;
uint64_t preserve;
};
# define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
struct reflink_arguments args = {
.old_path = (unsigned long) src_name,
.new_path = (unsigned long) dst_name,
.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
REFLINK_ATTR_NONE,
};
fd = open(src_name, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "Failed to open %s: %s\n",
src_name, strerror(errno));
return -1;
}
if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
fprintf(stderr, "Failed to reflink %s to %s: %s\n",
src_name, dst_name, strerror(errno));
return -1;
}
}
int
main(int argc, char *argv[])
{
if (argc != 3) {
fprintf(stdout, "Usage: %s source dest\n", argv[0]);
return 1;
}
return reflink_file(argv[1], argv[2], 0);
}
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits)
ocfs2: avoid unaligned access to dqc_bitmap
ocfs2: Use filemap_write_and_wait() instead of write_inode_now()
ocfs2: honor O_(D)SYNC flag in fallocate
ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2
ocfs2: send correct UUID to cleancache initialization
ocfs2: Commit transactions in error cases -v2
ocfs2: make direntry invalid when deleting it
fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free
ocfs2: Avoid livelock in ocfs2_readpage()
ocfs2: serialize unaligned aio
ocfs2: Implement llseek()
ocfs2: Fix ocfs2_page_mkwrite()
ocfs2: Add comment about orphan scanning
ocfs2: Clean up messages in the fs
ocfs2/cluster: Cluster up now includes network connections too
ocfs2/cluster: Add new function o2net_fill_node_map()
ocfs2/cluster: Fix output in file elapsed_time_in_ms
ocfs2/dlm: dlmlock_remote() needs to account for remastery
ocfs2/dlm: Take inflight reference count for remotely mastered resources too
ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery()
...
There are three cases found that in error cases, journal transactions are not
committed nor aborted. We should take care of these case by committing the
transactions. Otherwise, there would left a journal handle which will lead to
, in same process context, the comming ocfs2_start_trans() gets wrong credits.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
This patch changes the security_inode_init_security API by adding a
filesystem specific callback to write security extended attributes.
This change is in preparation for supporting the initialization of
multiple LSM xattrs and the EVM xattr. Initially the callback function
walks an array of xattrs, writing each xattr separately, but could be
optimized to write multiple xattrs at once.
For existing security_inode_init_security() calls, which have not yet
been converted to use the new callback function, such as those in
reiserfs and ocfs2, this patch defines security_old_inode_init_security().
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
It was evaludated to indexed before, check it is ok i think.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The new reservation code in local alloc has add the limitation
that the caller should handle the case that the local alloc
doesn't give use enough contiguous clusters. It make the old
xattr reflink code broken.
So this patch udpate the xattr reflink code so that it can
handle the case that local alloc give us one cluster at a time.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The old ocfs2_xattr_extent_allocation is too optimistic about
the clusters we can get. So actually if the file system is
too fragmented, ocfs2_add_clusters_in_btree will return us
with EGAIN and we need to allocate clusters once again.
So this patch change it to a while loop so that we can allocate
clusters until we reach clusters_to_add.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
In normal xattr set, the set sequence is inode, xattr block
and finally xattr bucket if we meet with a ENOSPC. But there
is a corner case.
So consider we will set a xattr whose value will be stored in
a cluster, and there is no xattr block by now. So we will
reserve 1 xattr block and 1 cluster for setting it. Now if we
fail in value extension(in case the volume is almost full and
we can't allocate the cluster because the check in
ocfs2_test_bg_bit_allocatable), ENOSPC will be returned. So
we will try to create a bucket(this time there is a chance that
the reserved cluster will be used), and when we try value extension
again, kernel bug happens. We did meet with it. Check the bug below.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1251
This patch just try to avoid this by adding a set_abort in
ocfs2_xattr_set_ctxt, so in case ENOSPC happens in value extension,
we will check whether it is caused by the real ENOSPC or just the
full of inode or xattr block. If it is the first case, we set set_abort
so that we don't try any further. we are safe to exit directly here
ince it is really ENOSPC.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_prepare_xattr_entry, if we fail to grow an existing value,
xa_cleanup_value_truncate() will leave the old entry in place. Thus, we
reset its value size. However, if we were allocating a new value, we
must not reset the value size or we will BUG(). This resolves
oss.oracle.com bug 1247.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In case the block we are going to free is allocated from
a discontiguous block group, we have to use suballoc_loc
to be the right group.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Get the suballoc_loc from ocfs2_claim_new_inode() or
ocfs2_claim_metadata(). Store it on the appropriate field of the block
we just allocated.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
They all take an ocfs2_alloc_context, which has the allocation inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In ocfs2, we use ocfs2_extend_trans() to extend a journal handle's
blocks. But if jbd2_journal_extend() fails, it will only restart
with the the new number of blocks. This tends to be awkward since
in most cases we want additional reserved blocks. It makes our code
harder to mantain since the caller can't be sure all the original
blocks will not be accessed and dirtied again. There are 15 callers
of ocfs2_extend_trans() in fs/ocfs2, and 12 of them have to add
h_buffer_credits before they call ocfs2_extend_trans(). This makes
ocfs2_extend_trans() really extend atop the original block count.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0
since before the kernel moved to git. There is no point in checking
this error.
ocfs2_journal_dirty() has been faithfully returning the status since the
beginning. All over ocfs2, we have blocks of code checking this can't
fail status. In the past few years, we've tried to avoid adding these
checks, because they are pointless. But anyone who looks at our code
assumes they are needed.
Finally, ocfs2_journal_dirty() is made a void function. All error
checking is removed from other files. We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday. They
won't.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
You can't store a pointer that you haven't filled in yet and expect it
to work.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When replacing a xattr's value, in some case we wipe its name/value
first and then re-add it. The wipe is done by
ocfs2_xa_block_wipe_namevalue() when the xattr is in the inode or
block. We currently adjust name_offset for all the entries which have
(offset < name_offset). This does not adjust the entrie we're replacing.
Since we are replacing the entry, we don't adjust the total entry count.
When we calculate a new namevalue location, we trust the entries
now-wrong offset in ocfs2_xa_get_free_start(). The solution is to
also adjust the name_offset for the replaced entry, allowing
ocfs2_xa_get_free_start() to calculate the new namevalue location
correctly.
The following script can trigger a kernel panic easily.
echo 'y'|mkfs.ocfs2 --fs-features=local,xattr -b 4K $DEVICE
mount -t ocfs2 $DEVICE $MNT_DIR
FILE=$MNT_DIR/$RANDOM
for((i=0;i<76;i++))
do
string_76="a$string_76"
done
string_78="aa$string_76"
string_82="aaaa$string_78"
touch $FILE
setfattr -n 'user.test1234567890' -v $string_76 $FILE
setfattr -n 'user.test1234567890' -v $string_78 $FILE
setfattr -n 'user.test1234567890' -v $string_82 $FILE
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2 can store extended attribute values as large as a single file. It
does this using a standard ocfs2 btree for the large value. However,
the previous code did not handle all error cases cleanly.
There are multiple problems to have.
1) We have trouble allocating space for a new xattr. This leaves us
with an empty xattr.
2) We overwrote an existing local xattr with a value root, and now we
have an error allocating the storage. This leaves us an empty xattr.
where there used to be a value. The value is lost.
3) We have trouble truncating a reused value. This leaves us with the
original entry pointing to the truncated original value. The value
is lost.
4) We have trouble extending the storage on a reused value. This leaves
us with the original value safely in place, but with more storage
allocated when needed.
This doesn't consider storing local xattrs (values that don't require a
btree). Those only fail when the journal fails.
Case (1) is easy. We just remove the xattr we added. We leak the
storage because we can't safely remove it, but otherwise everything is
happy. We'll print a warning about the leak.
Case (4) is easy. We still have the original value in place. We can
just leave the extra storage attached to this xattr. We return the
error, but the old value is untouched. We print a warning about the
storage.
Case (2) and (3) are hard because we've lost the original values. In
the old code, we ended up with values that could be partially read.
That's not good. Instead, we just wipe the xattr entry and leak the
storage. It stinks that the original value is lost, but now there isn't
a partial value to be read. We'll print a big fat warning.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_ibody_set() is the only remaining user of
ocfs2_xattr_set_entry(). ocfs2_xattr_set_entry() actually does two
things: it calls ocfs2_xa_set(), and it initializes the inline xattrs.
Initializing the inline space really belongs in its own call.
We lift the initialization to ocfs2_xattr_ibody_init(), called from
ocfs2_xattr_ibody_set() only when necessary. Now
ocfs2_xattr_ibody_set() can call ocfs2_xa_set() directly.
ocfs2_xattr_set_entry() goes away.
Another nice fact is that ocfs2_init_dinode_xa_loc() can trust
i_xattr_inline_size.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_block_set() calls into ocfs2_xattr_set_entry() with just the
HAS_XATTR flag. Most of the machinery of ocfs2_xattr_set_entry() is
skipped. All that really happens other than the call to ocfs2_xa_set()
is making sure the HAS_XATTR flag is set on the inode.
But HAS_XATTR should be set when we also set di->i_xattr_loc. And
that's done in ocfs2_create_xattr_block(). So let's move it there, and
then ocfs2_xattr_block_set() can just call ocfs2_xa_set().
While we're there, ocfs2_create_xattr_block() can take the set_ctxt for
a smaller argument list. It also learns to set HAS_XATTR_FL, because it
knows for sure. ocfs2_create_empty_xatttr_block() in the reflink path
fakes a set_ctxt to call ocfs2_create_xattr_block().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_set_in_bucket() doesn't need to do its own hacky space
checking. Let's let ocfs2_xa_prepare_entry() (via ocfs2_xa_set()) do
the more accurate work. Whenever it doesn't have space,
ocfs2_xattr_set_in_bucket() can try to get more space.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xa_set() wraps the ocfs2_xa_prepare_entry()/ocfs2_xa_store_value()
logic. Both callers can now use the same routine. ocfs2_xa_remove()
moves directly into ocfs2_xa_set().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xa_prepare_entry() gets all the logic to add, remove, or modify
external value trees. Now, when it exits, the entry is ready to receive
a value of any size.
ocfs2_xa_remove() is added to handle the complete removal of an entry.
It truncates the external value tree before calling
ocfs2_xa_remove_entry().
ocfs2_xa_store_inline_value() becomes ocfs2_xa_store_value(). It can
store any value.
ocfs2_xattr_set_entry() loses all the allocation logic and just uses
these functions. ocfs2_xattr_set_value_outside() disappears.
ocfs2_xattr_set_in_bucket() uses these functions and makes
ocfs2_xattr_set_entry_in_bucket() obsolete. That goes away, as does
ocfs2_xattr_bucket_set_value_outside() and
ocfs2_xattr_bucket_value_truncate().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We're going to want to make sure our buffers get accessed and dirtied
correctly. So have the xa_loc do the work. This includes storing the
inode on ocfs2_xa_loc.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We use the ocfs2_xattr_value_buf structure to manage external values.
It lets the value tree code do its work regardless of the containing
storage. ocfs2_xa_fill_value_buf() initializes a value buf from an
ocfs2_xa_loc entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Previously the xattr code would send in a fake value, containing a tree
root, to the function that installed name+value pairs. Instead, we pass
the real value to ocfs2_xa_set_inline_value(), and it notices that the
value cannot fit. Thus, it installs a tree root.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We create two new functions on ocfs2_xa_loc, ocfs2_xa_prepare_entry()
and ocfs2_xa_store_inline_value().
ocfs2_xa_prepare_entry() makes sure that the xl_entry field of
ocfs2_xa_loc is ready to receive an xattr. The entry will point to an
appropriately sized name+value region in storage. If an existing entry
can be reused, it will be. If no entry already exists, it will be
allocated. If there isn't space to allocate it, -ENOSPC will be
returned.
ocfs2_xa_store_inline_value() stores the data that goes into the 'value'
part of the name+value pair. For values that don't fit directly, this
stores the value tree root.
A number of operations are added to ocfs2_xa_loc_operations to support
these functions. This reflects the disparate behaviors of xattr blocks
and buckets.
With these functions, the overlapping ocfs2_xattr_set_entry_local() and
ocfs2_xattr_set_entry_normal() can be replaced with a single call
scheme.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
An ocfs2 xattr entry stores the text name and value as a pair in the
storage area. Obviously names and values can be variable-sized. If a
value is too large for the entry storage, a tree root is stored instead.
The name+value pair is also padded.
Because of this, there are a million places in the code that do:
if (needs_external_tree(value_size)
namevalue_size = pad(name_size) + tree_root_size;
else
namevalue_size = pad(name_size) + pad(value_size);
Let's create some convenience functions to make the code more readable.
There are three forms. The first takes the raw sizes. The second takes
an ocfs2_xattr_info structure. The third takes an existing
ocfs2_xattr_entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Rather than calculating strlen all over the place, let's store the
name length directly on ocfs2_xattr_info.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
struct ocfs2_xattr_info is a useful structure describing an xattr
you'd like to set. Let's put prefixes on the member fields so it's
easier to read and use.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add ocfs2_xa_remove_entry(), which will remove an xattr entry from its
storage via the ocfs2_xa_loc descriptor.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The ocfs2 extended attribute (xattr) code is very flexible. It can
store xattrs in the inode itself, in an external block, or in a tree of
data structures. This allows the number of xattrs to be bounded by the
filesystem size.
However, the code that manages each possible storage location is
different. Maintaining the ocfs2 xattr code requires changing each hunk
separately.
This patch is the start of a series introducing the ocfs2_xa_loc
structure. This structure wraps the on-disk details of an xattr
entry. The goal is that the generic xattr routines can use
ocfs2_xa_loc without knowing the underlying storage location.
This first pass merely implements the basic structure, initializing it,
and wiping the name+value pair of the entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
In ocfs2_value_metas_in_xattr_header, we should Use
le16_to_cpu for ocfs2_extent_list.l_next_free_rec.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To become consistent with filesystems such as XFS or BTRFS, make posix
ACLs always available. This also reduces possibility of
misconfiguration on admin's side.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
reflink has 2 options for the destination file:
1. snapshot: reflink will attempt to preserve ownership, permissions,
and all other security state in order to create a full snapshot.
2. new file: it will acquire the data extent sharing but will see the
file's security state and attributes initialized as a new file.
So add the option to ocfs2.
Signed-off-by: Tao Ma <tao.ma@oracle.com>