1
0
Fork 0
Commit Graph

9 Commits (7177395fdd919e561544a7d1c0ac196098a2ae2d)

Author SHA1 Message Date
Sedji Gaouaou 7177395fdd ALSA: AC97: add AC97 support for AT91.
This patch add AC97 support for ATMEL AT91, using the AVR32 code.
While AVR is using a DMA, the AT91 chips are using a Peripheral Data
Controller.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-25 20:22:15 +01:00
Hans-Christian Egtvedt 23572856e0 ALSA: snd-atmel-ac97c: replace bus_id with dev_name()
This patch replaces the references to bus_id to the new dev_name() API.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:59 +02:00
Hans-Christian Egtvedt bd74a1843e ALSA: snd-atmel-ac97c: cleanup registers when removing driver
This patch will set the channel A and control channel mode register to
zero before disabling the AC97C peripheral.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:50 +02:00
Hans-Christian Egtvedt 81baf3a7f6 ALSA: snd-atmel-ac97c: do a proper reset of the external codec
This patch will enable the AC97C before resetting the external codec,
leaving the AC97C disabled will result in floating I/O lines that can
affect the reset procedure.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:42 +02:00
Hans-Christian Egtvedt df163587ea ALSA: snd-atmel-ac97c: enable interrupts to catch events for error reporting
This patch will enable interrupts from AC97C and report about error
conditions that occurs.

On channel A both overrun and underrun will be enabled depending if
playback and/or capture are enabled. On the control channel the overrun
interrupt is enabled.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:33 +02:00
Hans-Christian Egtvedt c42eec0f19 ALSA: snd-atmel-ac97c: set correct size for buffer hardware parameter
This patch will set a proper maximum bytes for the buffer, which is:
channels * bytes per sample * maximum periods * maximum bytes per period.

It also sets the minimum periods to 6, a value chosen from testing, with
a minimum of 6 periods the system has good time to fill in new audio
data without skipping.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:15 +02:00
Hans-Christian Egtvedt 128ed6a926 ALSA: snd-atmel-ac97c: do not overwrite OCA and ICA when assigning channels
This patch will take care not to overwrite OCA and ICA registers when
assigning input and output channels. It will also make sure the
registers are at a known state when enabling a channel and clean up
properly in case of an error.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:55:08 +02:00
Hans-Christian Egtvedt d54bb9f0c5 ALSA: snd-atmel-ac97c: remove dead break statements after return in switch case
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-06 03:54:56 +02:00
Hans-Christian Egtvedt 4ede028f87 ALSA: Add ALSA driver for Atmel AC97 controller
This patch adds ALSA support for the AC97 controller found on Atmel
AVR32 devices.

Tested on ATSTK1006 + ATSTK1000 with a development board with a AC97
codec.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 15:08:51 +01:00