WARNING: Missing a blank line after declarations
Signed-off-by: Nicolas Joseph <nicolas.joseph@homecomputing.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This coding style error was detected using the checkpatch.pl script
Signed-off-by: Gary Servin <garyservin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lock sequence of dcon_blank_fb(fb_info->lock ---> console_lock) is against
with the one of console_callback(console_lock ---> fb_info->lock), it'll
lead to a potential dead lock, so reorder the lock sequence of dcon_blank_fb
to avoid the potential dead lock.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y
by preventing that kconfig combination.
These build errors are caused by having a kconfig bool symbol
(FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535),
but when the tristate symbol is =m, the bool symbol is =y.
drivers/built-in.o: In function `dcon_read_status_xo_1':
olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set'
olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear'
drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_init_xo_1':
olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear'
olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset'
olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event'
olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq'
olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'
However, adding GPIO_CS5535 to the Kconfig dependencies also creates
a kconfig recursive dependency error on powerpc:
drivers/i2c/Kconfig:5:error: recursive dependency detected!
drivers/i2c/Kconfig:5: symbol I2C is selected by FB_OLPC_DCON
drivers/staging/olpc_dcon/Kconfig:1: symbol FB_OLPC_DCON depends on GPIO_CS5535
drivers/gpio/Kconfig:577: symbol GPIO_CS5535 depends on GPIOLIB
drivers/gpio/Kconfig:38: symbol GPIOLIB is selected by ARCH_REQUIRE_GPIOLIB
drivers/gpio/Kconfig:23: symbol ARCH_REQUIRE_GPIOLIB is selected by MCU_MPC8349EMITX
arch/powerpc/platforms/Kconfig:351: symbol MCU_MPC8349EMITX depends on I2C
This is due to FB_OLPC_DCON selecting I2C instead of depending on it,
so change the select to a dependency.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build errors when GPIO_CS5535=m and FB_OLPC_DCON=y
by preventing that kconfig combination.
These build errors are caused by having a kconfig bool symbol
(FB_OLPC_DCON_1) that depend on a tristate symbol (GPIO_CS5535),
but when the tristate symbol is =m, the bool symbol is =y.
drivers/built-in.o: In function `dcon_read_status_xo_1':
olpc_dcon_xo_1.c:(.text+0x359531): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x35959f): undefined reference to `cs5535_gpio_set'
olpc_dcon_xo_1.c:(.text+0x359610): undefined reference to `cs5535_gpio_clear'
drivers/built-in.o:olpc_dcon_xo_1.c:(.text+0x3596a1): more undefined references to `cs5535_gpio_clear' follow
drivers/built-in.o: In function `dcon_wiggle_xo_1':
olpc_dcon_xo_1.c:(.text+0x359708): undefined reference to `cs5535_gpio_set'
drivers/built-in.o: In function `dcon_init_xo_1':
olpc_dcon_xo_1.c:(.text+0x35989b): undefined reference to `cs5535_gpio_clear'
olpc_dcon_xo_1.c:(.text+0x3598b5): undefined reference to `cs5535_gpio_isset'
olpc_dcon_xo_1.c:(.text+0x359963): undefined reference to `cs5535_gpio_setup_event'
olpc_dcon_xo_1.c:(.text+0x359980): undefined reference to `cs5535_gpio_set_irq'
olpc_dcon_xo_1.c:(.text+0x359a36): undefined reference to `cs5535_gpio_set'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary work pending test before calling schedule_work().
It has been tested in queue_work_on() already. No functional changed.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Jens Frederich <jfrederich@gmail.com>
Cc: Daniel Drake <dsd@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Console event notifier support: No one I've asked knows what this
all about.
2. Audit code for unnecessary code: This is done.
3. Verify sane i2cAPI usage: This is also done.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TODO entry - drop global variables, use a proper olpc_dcon_priv
struct - is already finished. The driver has no global variables.
It uses the private structure 'dcon_priv'.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using an int which is casted to unsigned char as inbuf is messy.
The code won't work on big endian systems. The patch should fix
this.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replace some magic numbers. I believe it makes
the driver more readable.
The magic number 0x26 is the XO system embedded controller
(EC) command 'DCON power enable/disable'.
Number 0x41, and 0x42 are special memory controller settings
register. The 0x41 initialize bit sequence 0x101 means:
enable memory power down function and special SDRAM clock
delay for synchronize SDRAM output and clock signal.
The 0x42 initialize squence 0x101 is wrong. According to
the specification Bit 8 is reserved, thus not in use.
I removed it.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon and Chris Ball are not longer at OLPC.
Daniel Drake is the new OLPC go-to guy. And I wanna
also be CC'd on DCON and other OLPC patches.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FB_OLPC_DCON help section is to short according to checkpatch.pl.
We want more information about the controller type, its task, its video
pipeline position and so on.
There are no style issues, remove checkpatch.pl TODO entry.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The resolution of msleep is related to HZ, so with HZ set to
100 any msleep of less then 10ms will become ~10ms. This is
not what we want. Use usleep_range to get more control of
what is happening here.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
..instead of the i2c_driver hooks. This should silence the following
runtime warnings:
[ 17.820321] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 17.846082] i2c-core: driver [olpc_dcon] using legacy resume method
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code looks in the PCI config space for pin addresses and sets up some
stuff. However, Openfirmware has already done this for us, so there's no
need to ever do it in Linux. According to Mitch Bradley, this OFW has been
doing this for us since at least B3 builds (pre-mass production).
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously we registered a notifier block to inform us of any framebuffer
device changes; if the screen was blanked or unblanked, we'd put the DCON
to sleep or wake it up.
Turns out that the backlight code registers a notifier block as well
and calls the update_status hook, so we can just use that to put the DCON
to sleep. For those status updates where the blanking isn't changed,
dcon_sleep will do nothing.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another global variable (dcon_wait_queue) moved into the dcon_priv struct.
In the process, replace an instance of a manually implemented
wait_event_timeout. This code came from Jordan's original gxfb_dcon.c
driver waaaay back in 2006; well past time for a replacement.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'useaa' module parameter was a workaround for a buggy DCON prototype
not supporting the optional anti-aliasing mode properly. There's no
reason to disable it any more, so drop the option.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().
Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Quoted strings that were broken over multiple lines are put on a
single line for easier grep'ability.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Dan mentioned, dcon_write() will only write u16 values. The
appropriate parts have been changed. As a result of module_param()
not accepting u16 as a valid data type, ushort is used.
Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As noted by the checkpatch script, strict_strtoul is obsolete. Unsigned
longs are used, so it seems good to take kstrtoul.
Signed-off-by: Valentin Rothberg <valentinrothberg@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change ->read_status() by separating the error handling and the
status bits. This also fixes a signedness bug in dcon_interrupt()
that would break the error handling.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of people expect module.h to just "be there" without
any #include effort. But we are crushing that. So fix those
files in staging relying on implicit module.h presence.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use dcon_read and dcon_write; shorter, and understands the dcon_priv
struct. This transition was started long ago. This converts the
last few i2c_smbus_* callers.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The v1 DCONs only existed for XO-1 prototypes (and even then, very very
early prototypes). Drop support for v1 DCON.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This came from Jordan's original 2007 gxfb_dcon commit. I've never
seen or heard of it actually being used. Presumably it was once
useful for skipping hardware initialization when reloading the module
over and over during driver development..
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix olpc_dcon.c build by selecting the needed kconfig symbol
BACKLIGHT_CLASS_DEVICE.
olpc_dcon.c:(.text+0x11588b): undefined reference to `backlight_device_register'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (970 commits)
staging: usbip: replace usbip_u{dbg,err,info} and printk with dev_ and pr_
staging:iio: Trivial kconfig reorganization and uniformity improvements.
staging:iio:documenation partial update.
staging:iio: use pollfunc allocation helpers in remaining drivers.
staging:iio:max1363 misc cleanups and use of for_each_bit_set to simplify event code spitting out.
staging:iio: implement an iio_info structure to take some of the constant elements out of iio_dev.
staging:iio:meter:ade7758: Use private data space from iio_allocate_device
staging:iio:accel:lis3l02dq make write_reg_8 take value not a pointer to value.
staging:iio: ring core cleanups + check if read_last available in lis3l02dq
staging:iio:core cleanup: squash tiny wrappers and use dev_set_name to handle creation of event interface name.
staging:iio: poll func allocation clean up.
staging:iio:ad7780 trivial unused header cleanup.
staging:iio:adc: AD7780: Use private data space from iio_allocate_device + trivial fixes
staging:iio:adc:AD7780: Convert to new channel registration method
staging:iio:adc: AD7606: Drop dev_data in favour of iio_priv()
staging:iio:adc: AD7606: Consitently use indio_dev
staging:iio: Rip out helper for software rings.
staging:iio:adc:AD7298: Use private data space from iio_allocate_device
staging:iio: rationalization of different buffer implementation hooks.
staging:iio:imu:adis16400 avoid allocating rx, tx, and state separately from iio_dev.
...
Fix up trivial conflicts in
- drivers/staging/intel_sst/intelmid.c: patches applied in both branches
- drivers/staging/rt2860/common/cmm_data_{pci,usb}.c: removed vs spelling
- drivers/staging/usbip/vhci_sysfs.c: trivial header file inclusion
The olpc dcon xo1 driver uses udelay() without including <linux/delay.h>.
This patch adds it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the whitespace and coding style issues in olpc_dcon metioned by
checkpatch.
Signed-off-by: Stefan Brähler <Stefan.Braehler@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c: In function ‘dcon_wiggle_xo_1_5’:
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:155: error: implicit declaration of function ‘udelay’
drivers/built-in.o: In function `dcon_read_status_xo_1':
olpc_dcon_xo_1.c:(.text+0x13472e): undefined reference to `cs5535_gpio_set'
Signed-off-by: Sascha Silbe <sascha-pgp@silbe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There may be multiple ways of controlling the backlight on a given
machine. Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DCON builds properly now; we can drop the config dep on
CONFIG_BROKEN.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Move bl_val and bl_dev into dcon_priv struct....
- The only time we ever read the backlight val from the dcon is
at probe time. Rather than calling dcon_get_backlight for that, just
read from the register.
- Drop dcon_get_backlight; it's just returning dcon->bl_val.
- Rename dcon_set_backlight_hw to dcon_set_backlight, and drop the
old dcon_set_backlight function. Move contents of old dcon_set_backlight
function into dconbl_set.
- Shuffle backlight_ops callbacks around to be closer to struct, and
rename them.
- Make use of new backlight_properties arg to backlight_device_register,
drop old code that set this manually.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Global variables dcon_switched, dcon_irq_time, and dcon_load_time can all be moved
into the dcon_priv struct now that dcon_interrupt has access to dcon_priv.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This moves dcon_source and dcon_pending into the dcon_priv struct.
Because these variables are used by the IRQ handler (which is
registered in the model-specific callbacks), we end up needing
to move dcon_priv into olpc_dcon.h. This also changes the IRQ
registration to use the dcon_priv pointer as dev_id, instead of
dcon_driver.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds CONFIG_FB_OLPC_DCON_1 and CONFIG_FB_OLPC_DCON_1_5 options for
allowing selection of XO-1 and/or XO-1.5 DCON support. In the process,
it also forces the xo_1.c and xo_1_5.c files to build as separate units,
correctly selects between XO-1 and XO-1.5 at runtime, and adds some
hacks to allow xo_1_5.c to build.
This isn't the cleanest patch, but it'll get better as more global
variables are dropped.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Joseph