Without crc32 support, this fails to link:
arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* validate key indices for key deletion
* more preamble support in mac80211
* various 6 GHz scan fixes/improvements
* a common SAR power limitations API
* various small fixes & code improvements
-----BEGIN PGP SIGNATURE-----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=+qd6
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A new set of wireless changes:
* validate key indices for key deletion
* more preamble support in mac80211
* various 6 GHz scan fixes/improvements
* a common SAR power limitations API
* various small fixes & code improvements
* tag 'mac80211-next-for-net-next-2020-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
mac80211: add ieee80211_set_sar_specs
nl80211: add common API to configure SAR power limitations
mac80211: fix a mistake check for rx_stats update
mac80211: mlme: save ssid info to ieee80211_bss_conf while assoc
mac80211: Update rate control on channel change
mac80211: don't filter out beacons once we start CSA
mac80211: Fix calculation of minimal channel width
mac80211: ignore country element TX power on 6 GHz
mac80211: use bitfield helpers for BA session action frames
mac80211: support Rx timestamp calculation for all preamble types
mac80211: don't set set TDLS STA bandwidth wider than possible
mac80211: support driver-based disconnect with reconnect hint
cfg80211: support immediate reconnect request hint
mac80211: use struct assignment for he_obss_pd
cfg80211: remove struct ieee80211_he_bss_color
nl80211: validate key indexes for cfg80211_registered_device
cfg80211: include block-tx flag in channel switch started event
mac80211: disallow band-switch during CSA
ieee80211: update reduced neighbor report TBTT info length
cfg80211: Save the regulatory domain when setting custom regulatory
...
====================
Link: https://lore.kernel.org/r/20201211142552.209018-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NL80211_CMD_SET_SAR_SPECS is added to configure SAR from
user space. NL80211_ATTR_SAR_SPEC is used to pass the SAR
power specification when used with NL80211_CMD_SET_SAR_SPECS.
Wireless driver needs to register SAR type, supported frequency
ranges to wiphy, so user space can query it. The index in
frequency range is used to specify which sub band the power
limitation applies to. The SAR type is for compatibility, so later
other SAR mechanism can be implemented without breaking the user
space SAR applications.
Normal process is user space queries the SAR capability, and
gets the index of supported frequency ranges and associates the
power limitation with this index and sends to kernel.
Here is an example of message send to kernel:
8c 00 00 00 08 00 01 00 00 00 00 00 38 00 2b 81
08 00 01 00 00 00 00 00 2c 00 02 80 14 00 00 80
08 00 02 00 00 00 00 00 08 00 01 00 38 00 00 00
14 00 01 80 08 00 02 00 01 00 00 00 08 00 01 00
48 00 00 00
NL80211_CMD_SET_SAR_SPECS: 0x8c
NL80211_ATTR_WIPHY: 0x01(phy idx is 0)
NL80211_ATTR_SAR_SPEC: 0x812b (NLA_NESTED)
NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER)
NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED)
freq range 0 power: 0x38 in 0.25dbm unit (14dbm)
freq range 1 power: 0x48 in 0.25dbm unit (18dbm)
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Abhishek Kumar <kuabhs@chromium.org>
Link: https://lore.kernel.org/r/20201203103728.3034-2-cjhuang@codeaurora.org
[minor edits, NLA parse cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().
Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().
Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com
Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Accept a scan request with the duration set even if the driver
does not support setting the scan dwell. The duration can be used
as a hint to the driver, but the driver may use its internal logic
for setting the scan dwell.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.9491a12f9226.Ia9c5b24fcefc5ce5592537507243391633a27e5f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of scan request with wildcard SSID, or in case of more
than one SSID in scan request, need to scan PSC channels even though
all the co-located APs found during the legacy bands scan indicated
that all the APs in their ESS are co-located, as we might find different
networks on the PSC channels.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.736415a9ca5d.If5b3578ae85e11a707a5da07e66ba85928ba702c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of casting callback functions to type iw_handler, which trips
indirect call checking with Clang's Control-Flow Integrity (CFI), add
stub functions with the correct function type for the callbacks.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201117205902.405316-1-samitolvanen@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't populate the const array bws on the stack but instead it
static. Makes the object code smaller by 80 bytes:
Before:
text data bss dec hex filename
85694 16865 1216 103775 1955f ./net/wireless/reg.o
After:
text data bss dec hex filename
85518 16961 1216 103695 1950f ./net/wireless/reg.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201116181636.362729-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* injection/radiotap updates for new test capabilities
* remove WDS support - even years ago when we turned
it off by default it was already basically unusable
* support for HE (802.11ax) rates for beacons
* support for some vendor-specific HE rates
* many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=TGgF
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Some updates:
* injection/radiotap updates for new test capabilities
* remove WDS support - even years ago when we turned
it off by default it was already basically unusable
* support for HE (802.11ax) rates for beacons
* support for some vendor-specific HE rates
* many other small features/cleanups
* tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits)
nl80211: fix kernel-doc warning in the new SAE attribute
cfg80211: remove WDS code
mac80211: remove WDS-related code
rt2x00: remove WDS code
b43legacy: remove WDS code
b43: remove WDS code
carl9170: remove WDS code
ath9k: remove WDS code
wireless: remove CONFIG_WIRELESS_WDS
mac80211: assure that certain drivers adhere to DONT_REORDER flag
mac80211: don't overwrite QoS TID of injected frames
mac80211: adhere to Tx control flag that prevents frame reordering
mac80211: add radiotap flag to assure frames are not reordered
mac80211: save HE oper info in BSS config for mesh
cfg80211: add support to configure HE MCS for beacon rate
nl80211: fix beacon tx rate mask validation
nl80211/cfg80211: fix potential infinite loop
cfg80211: Add support to calculate and report 4096-QAM HE rates
cfg80211: Add support to configure SAE PWE value to drivers
ieee80211: Add definition for WFA DPP
...
====================
Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While adding HE MCS beacon tx rate support, it is observed that legacy
beacon tx rate in VHT hwsim test suite is failed. Whenever the
application doesn't explicitly set VHT/MCS rate attribute in fixed rate
command, by default all HE MCS masks are enabled in cfg80211. In beacon
fixed rate, more than one rate mask is not allowed. Fix that by not
setting all rate mask by default in case of beacon tx rate.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1602879327-29488-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.
Addresses-Coverity: ("Infinite loop")
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers supporting 4096-QAM rates as a vendor extension in HE mode need
to update the correct rate info to userspace while using 4096-QAM (MCS12
and MCS13) in HE mode. Add support to calculate bitrates of HE-MCS12 and
HE-MCS13 which represent the 4096-QAM modulation schemes. The MCS12 and
MCS13 bitrates are defined in IEEE P802.11be/D0.1.
In addition, scale up the bitrates by 3*2048 in order to accommodate
calculations for the new MCS12 and MCS13 rates without losing fraction
values.
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20201029183457.7005-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to configure SAE PWE preference from userspace to drivers in
both AP and STA modes. This is needed for cases where the driver takes
care of Authentication frame processing (SME in the driver) so that
correct enforcement of the acceptable PWE derivation mechanism can be
performed.
The userspace applications can pass the sae_pwe value using the
NL80211_ATTR_SAE_PWE attribute in the NL80211_CMD_CONNECT and
NL80211_CMD_START_AP commands to the driver. This allows selection
between the hunting-and-pecking loop and hash-to-element options for PWE
derivation. For backwards compatibility, this new attribute is optional
and if not included, the driver is notified of the value being
unspecified.
Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20201027100910.22283-1-jouni@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix follow warning:
[net/wireless/reg.c:3619]: (warning) %d in format string (no. 2)
requires 'int' but the argument type is 'unsigned int'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a race condition in the netdev registration in that
NETDEV_REGISTER actually happens after the netdev is available,
and so if we initialize things only there, we might get called
with an uninitialized wdev through nl80211 - not using a wdev
but using a netdev interface index.
I found this while looking into a syzbot report, but it doesn't
really seem to be related, and unfortunately there's no repro
for it (yet). I can't (yet) explain how it managed to get into
cfg80211_release_pmsr() from nl80211_netlink_notify() without
the wdev having been initialized, as the latter only iterates
the wdevs that are linked into the rdev, which even without the
change here happened after init.
However, looking at this, it seems fairly clear that the init
needs to be done earlier, otherwise we might even re-init on a
netns move, when data might still be pending.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20201009135821.fdcbba3aad65.Ie9201d91dbcb7da32318812effdc1561aeaf4cdc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
-----BEGIN PGP SIGNATURE-----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=TrMG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A handful of changes:
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.
However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.
This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...
Fixes: fe1abafd94 ("nl80211: re-add channel width and extended capa advertising")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When wiphy dumps cannot be split, such as in events or with
older userspace that doesn't support it, the size can today
be too big.
Reduce it, by doing two things:
1) remove data that couldn't have been present before the
split capability was introduced since it's new, such as
HE capabilities
2) as suggested by Martin Willi, remove management frame
subtypes from the split dumps, as just (1) isn't even
enough due to other new code capabilities. This is fine
as old consumers (really just wpa_supplicant) didn't
check this data before they got support for split dumps.
Reported-by: Martin Willi <martin@strongswan.org>
Suggested-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20200928130655.53bce7873164.I71f06c9a221cd0630429a1a56eeae68a13beca61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.
Fixes: 796e90f42b ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1601278091-20313-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The the __freq_reg_info() never returns NULL and the callers don't check
for NULL. This initialization to set "reg_rule = NULL;" is just there
to make GCC happy but it's not required in current GCCs.
The problem is that Smatch sees the initialization and concludes that
this function can return NULL so it complains that the callers are not
checking for it.
Smatch used to be able to parse this correctly but we recently changed
the code from:
- for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+ for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {
Originally Smatch used to understand that this code always iterates
through the loop once, but the change from "MHZ_TO_KHZ(20)" to
"MHZ_TO_KHZ(bws[i])" is too complicated for Smatch.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923084203.GC1454948@mwanda
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-16-thomas@adapt-ip.com
[add the offset only if non-zero]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support 6 GHz scanning, by
* a new scan flag to scan for colocated BSSes advertised
by (and found) APs on 2.4 & 5 GHz
* doing the necessary reduced neighbor report parsing for
this, to find them
* adding the ability to split the scan request in case the
device by itself cannot support this.
Also add some necessary bits in mac80211 to not break with
these changes.
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds new attributes to support unsolicited broadcast
probe response transmission used for in-band
discovery in 6GHz band (IEEE P802.11ax/D6.0 26.17.2.3.2, AP behavior for
fast passive scanning).
The new attribute, NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, is nested which
supports following parameters:
(1) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT - Packet interval
(2) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL - Template data
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Link: https://lore.kernel.org/r/010101747a946698-aac263ae-2ed3-4dab-9590-0bc7131214e1-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().
Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The S1G beacon has a different header size than regular
beacons, so adjust the beacon head validator.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G channels have a minimum bandwidth of 1Mhz, and there
is a 1:1 mapping of allowed bandwidth to channel number.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan Peer