commit cb7f4a8b1f upstream.
In mtrr_type_lookup(), if the input memory address region is not in the
MTRR, over 4GB, and not over the top of memory, a write-back attribute
is returned. These condition checks are for ensuring the input memory
address region is actually mapped to the physical memory.
However, if the end address is just aligned with the top of memory,
the condition check treats the address is over the top of memory, and
write-back attribute is not returned.
And this hits in a real use case with NVDIMM: the nd_pmem module tries
to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a
NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes
very low since it is aligned with the top of memory and its memory type
is uncached-minus.
Move the input end address change to inclusive up into
mtrr_type_lookup(), before checking for the top of memory in either
mtrr_type_lookup_{variable,fixed}() helpers.
[ bp: Massage commit message. ]
Fixes: 0cc705f56e ("x86/mm/mtrr: Clean up mtrr_type_lookup()")
Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Programming MTRR registers in multi-processor systems is a rather lengthy
process. Furthermore, all processors must program these registers in lock
step and with interrupts disabled; the process also involves flushing
caches and TLBs twice. As a result, the process may take a considerable
amount of time.
On some platforms, this can lead to a large skew of the refined-jiffies
clock source. Early when booting, if no other clock is available (e.g.,
booting with hpet=disabled), the refined-jiffies clock source is used to
monitor the TSC clock source. If the skew of refined-jiffies is too large,
Linux wrongly assumes that the TSC is unstable:
clocksource: timekeeping watchdog on CPU1: Marking clocksource
'tsc-early' as unstable because the skew is too large:
clocksource: 'refined-jiffies' wd_now: fffedc10 wd_last:
fffedb90 mask: ffffffff
clocksource: 'tsc-early' cs_now: 5eccfddebc cs_last: 5e7e3303d4
mask: ffffffffffffffff
tsc: Marking TSC unstable due to clocksource watchdog
As per measurements, around 98% of the time needed by the procedure to
program MTRRs in multi-processor systems is spent flushing caches with
wbinvd(). As per the Section 11.11.8 of the Intel 64 and IA 32
Architectures Software Developer's Manual, it is not necessary to flush
caches if the CPU supports cache self-snooping. Thus, skipping the cache
flushes can reduce by several tens of milliseconds the time needed to
complete the programming of the MTRR registers:
Platform Before After
104-core (208 Threads) Skylake 1437ms 28ms
2-core ( 4 Threads) Haswell 114ms 2ms
Reported-by: Mohammad Etemadi <mohammad.etemadi@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Alan Cox <alan.cox@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jordan Borgner <mail@jordan-borgner.de>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/1561689337-19390-3-git-send-email-ricardo.neri-calderon@linux.intel.com
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"sizeof(x)" is the canonical coding style used in arch/x86 most of the time.
Fix the few places that didn't follow the convention.
(Also do some whitespace cleanups in a few places while at it.)
[ mingo: Rewrote the changelog. ]
Signed-off-by: Jordan Borgner <mail@jordan-borgner.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181028125828.7rgammkgzep2wpam@JordanDesktop
Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.
Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed. Build testing
revealed some implicit header usage that was fixed up accordingly.
Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use static_cpu_has() in __flush_tlb_all() due to the time-sensitivity of
this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459266123-21878-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled.
This results in calling pat_init() on BSP only since APs do not call
pat_init() when MTRR is disabled. This inconsistency between BSP
and APs leads to undefined behavior.
Make BSP's calling condition to pat_init() consistent with AP's,
mtrr_ap_init() and mtrr_aps_init().
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Use the more current logging style pr_<level>(...) instead of the old
printk(KERN_<LEVEL> ...).
- Convert pr_warning() to pr_warn().
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454384702-21707-1-git-send-email-slaoub@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.
The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It is possible to enable CONFIG_MTRR and CONFIG_X86_PAT and end
up with a system with MTRR functionality disabled but PAT
functionality enabled. This can happen, for instance, when the
Xen hypervisor is used where MTRRs are not supported but PAT is.
This can happen on Linux as of commit
47591df505 ("xen: Support Xen pv-domains using PAT")
by Juergen, introduced in v3.19.
Technically, we should assume the proper CPU bits would be set
to disable MTRRs but we can't always rely on this. At least on
the Xen Hypervisor, for instance, only X86_FEATURE_MTRR was
disabled as of Xen 4.4 through Xen commit 586ab6a [0], but not
X86_FEATURE_K6_MTRR, X86_FEATURE_CENTAUR_MCR, or
X86_FEATURE_CYRIX_ARR for instance.
Roger Pau Monné has clarified though that although this is
technically true we will never support PVH on these CPU types so
Xen has no need to disable these bits on those systems. As per
Roger, AMD K6, Centaur and VIA chips don't have the necessary
hardware extensions to allow running PVH guests [1].
As per Toshi it is also possible for the BIOS to disable MTRR
support, in such cases get_mtrr_state() would update the MTRR
state as per the BIOS, we need to propagate this information as
well.
x86 MTRR code relies on quite a bit of checks for mtrr_if being
set to check to see if MTRRs did get set up. Instead, lets
provide a generic getter for that. This also adds a few checks
where they were not before which could potentially safeguard
ourselves against incorrect usage of MTRR where this was not
desirable.
Where possible match error codes as if MTRRs were disabled on
arch/x86/include/asm/mtrr.h.
Lastly, since disabling MTRRs can happen at run time and we
could end up with PAT enabled, best record now in our logs when
MTRRs are disabled.
[0] ~/devel/xen (git::stable-4.5)$ git describe --contains 586ab6a 4.4.0-rc1~18
[1] http://lists.xenproject.org/archives/html/xen-devel/2015-03/msg03460.html
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: bhelgaas@google.com
Cc: david.vrabel@citrix.com
Cc: jbeulich@suse.com
Cc: konrad.wilk@oracle.com
Cc: venkatesh.pallipadi@intel.com
Cc: ville.syrjala@linux.intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1426893517-2511-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-12-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds the argument 'uniform' to mtrr_type_lookup(),
which gets set to 1 when a given range is covered uniformly by
MTRRs, i.e. the range is fully covered by a single MTRR entry or
the default type.
Change pud_set_huge() and pmd_set_huge() to honor the 'uniform'
flag to see if it is safe to create a huge page mapping in the
range.
This allows them to create a huge page mapping in a range
covered by a single MTRR entry of any memory type. It also
detects a non-optimal request properly. They continue to check
with the WB type since it does not effectively change the
uniform mapping even if a request spans multiple MTRR entries.
pmd_set_huge() logs a warning message to a non-optimal request
so that driver writers will be aware of such a case. Drivers
should make a mapping request aligned to a single MTRR entry
when the range is covered by MTRRs.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[ Realign, flesh out comments, improve warning message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MTRRs contain fixed and variable entries. mtrr_type_lookup() may
repeatedly call __mtrr_type_lookup() to handle a request that
overlaps with variable entries.
However, __mtrr_type_lookup() also handles the fixed entries,
which do not have to be repeated. Therefore, this patch creates
separate functions, mtrr_type_lookup_fixed() and
mtrr_type_lookup_variable(), to handle the fixed and variable
ranges respectively.
The patch also updates the function headers to clarify the
return values and output argument. It updates comments to
clarify that the repeating is necessary to handle overlaps with
the default type, since overlaps with multiple entries alone can
be handled without such repeating.
There is no functional change in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-6-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mtrr_type_lookup() returns verbatim 0xFF when MTRRs are
disabled. This patch defines MTRR_TYPE_INVALID to clarify the
meaning of this value, and documents its usage.
Document the return values of the kernel virtual address mapping
helpers pud_set_huge(), pmd_set_huge, pud_clear_huge() and
pmd_clear_huge().
There is no functional change in this patch.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-5-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'mtrr_state.enabled' contains the FE (fixed MTRRs enabled)
and E (MTRRs enabled) flags in MSR_MTRRdefType. Intel SDM,
section 11.11.2.1, defines these flags as follows:
- All MTRRs are disabled when the E flag is clear.
The FE flag has no affect when the E flag is clear.
- The default type is enabled when the E flag is set.
- MTRR variable ranges are enabled when the E flag is set.
- MTRR fixed ranges are enabled when both E and FE flags
are set.
MTRR state checks in __mtrr_type_lookup() do not match with SDM.
Hence, this patch makes the following changes:
- The current code detects MTRRs disabled when both E and
FE flags are clear in mtrr_state.enabled. Fix to detect
MTRRs disabled when the E flag is clear.
- The current code does not check if the FE bit is set in
mtrr_state.enabled when looking at the fixed entries.
Fix to check the FE flag.
- The current code returns the default type when the E flag
is clear in mtrr_state.enabled. However, the default type
is UC when the E flag is clear. Remove the code as this
case is handled as MTRR disabled with the 1st change.
In addition, this patch defines the E and FE flags in
mtrr_state.enabled as follows.
- FE flag: MTRR_STATE_MTRR_FIXED_ENABLED
- E flag: MTRR_STATE_MTRR_ENABLED
print_mtrr_state() and x86_get_mtrr_mem_range() are also updated
accordingly.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-4-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an MTRR entry is inclusive to a requested range, i.e. the
start and end of the request are not within the MTRR entry range
but the range contains the MTRR entry entirely:
range_start ... [mtrr_start ... mtrr_end] ... range_end
__mtrr_type_lookup() ignores such a case because both
start_state and end_state are set to zero.
This bug can cause the following issues:
1) reserve_memtype() tracks an effective memory type in case
a request type is WB (ex. /dev/mem blindly uses WB). Missing
to track with its effective type causes a subsequent request
to map the same range with the effective type to fail.
2) pud_set_huge() and pmd_set_huge() check if a requested range
has any overlap with MTRRs. Missing to detect an overlap may
cause a performance penalty or undefined behavior.
This patch fixes the bug by adding a new flag, 'inclusive',
to detect the inclusive case. This case is then handled in
the same way as end_state:1 since the first region is the same.
With this fix, __mtrr_type_lookup() handles the inclusive case
properly.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-3-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__mtrr_type_lookup() checks MTRR fixed ranges when mtrr_state.have_fixed
is set and start is less than 0x100000.
However, the 'else if (start < 0x1000000)' in the code checks with an
incorrect address as it has an extra-zero in the address.
The code still runs correctly as this check is meaningless, though.
This patch replaces the incorrect address check with 'else' with no
condition.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1427234921-19737-4-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1431332153-18566-8-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Context switches and TLB flushes can change individual bits of CR4.
CR4 reads take several cycles, so store a shadow copy of CR4 in a
per-cpu variable.
To avoid wasting a cache line, I added the CR4 shadow to
cpu_tlbstate, which is already touched in switch_mm. The heaviest
users of the cr4 shadow will be switch_mm and __switch_to_xtra, and
__switch_to_xtra is called shortly after switch_mm during context
switch, so the cacheline is likely to be hot.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Vince Weaver <vince@deater.net>
Cc: "hillf.zj" <hillf.zj@alibaba-inc.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/3a54dd3353fffbf84804398e00dfdc5b7c1afd7d.1414190806.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bisection between 3.11 and 3.12 fingered commit 9824cf97 ("mm:
vmstats: tlb flush counters") to cause overhead problems.
The counters are undeniably useful but how often do we really
need to debug TLB flush related issues? It does not justify
taking the penalty everywhere so make it a debugging option.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-XzxjntugxuwpxXhcrxqqh53b@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.
UP systems do not do remote TLB flushes, so compile those counters out on
UP.
arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly. This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4. It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.
[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 mm changes from Ingo Molnar:
"Misc improvements:
- Fix /proc/mtrr reporting
- Fix ioremap printout
- Remove the unused pvclock fixmap entry on 32-bit
- misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Correct function name output
x86: Fix /proc/mtrr with base/size more than 44bits
ix86: Don't waste fixmap entries
x86/mm: Drop unneeded include <asm/*pgtable, page*_types.h>
x86_64: Correct phys_addr in cleanup_highmap comment
On one sytem that mtrr range is more then 44bits, in dmesg we have
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 [000080000000-0000FFFFFFFF] mask 3FFF80000000 uncachable
[ 0.000000] 1 [380000000000-38FFFFFFFFFF] mask 3F0000000000 uncachable
[ 0.000000] 2 [000099000000-000099FFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 3 [00009A000000-00009AFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 4 [381FFA000000-381FFBFFFFFF] mask 3FFFFE000000 write-through
[ 0.000000] 5 [381FFC000000-381FFC0FFFFF] mask 3FFFFFF00000 write-through
[ 0.000000] 6 [0000AD000000-0000ADFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 7 [0000BD000000-0000BDFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
but /proc/mtrr report wrong:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x80000000000 (8388608MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x81ffa000000 (8519584MB), size= 32MB, count=1: write-through
reg05: base=0x81ffc000000 (8519616MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
so bit 44 and bit 45 get cut off.
We have problems in arch/x86/kernel/cpu/mtrr/generic.c::generic_get_mtrr().
1. for base, we miss cast base_lo to 64bit before shifting.
Fix that by adding u64 casting.
2. for size, it only can handle 44 bits aka 32bits + page_shift
Fix that with 64bit mask instead of 32bit mask_lo, then range could be
more than 44bits.
At the same time, we need to update size_or_mask for old cpus that does
support cpuid 0x80000008 to get phys_addr. Need to set high 32bits
to all 1s, otherwise will not get correct size for them.
Also fix mtrr_add_page: it should check base and (base + size - 1)
instead of base and size, as base and size could be small but
base + size could bigger enough to be out of boundary. We can
use boot_cpu_data.x86_phys_bits directly to avoid size_or_mask.
So When are we going to have size more than 44bits? that is 16TiB.
after patch we have right ouput:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x380000000000 (58720256MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x381ffa000000 (58851232MB), size= 32MB, count=1: write-through
reg05: base=0x381ffc000000 (58851264MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
-v2: simply checking in mtrr_add_page according to hpa.
[ hpa: This probably wants to go into -stable only after having sat in
mainline for a bit. It is not a regression. ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371162815-29931-1-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
high_width can be easily calculated in a single expression when
making use of __ffs64().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/4FF71053020000780008E1B5@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Following is from Notes of section 11.5.3 of Intel processor
manual available at:
http://www.intel.com/Assets/PDF/manual/325384.pdf
For the Pentium 4 and Intel Xeon processors, after the sequence of
steps given above has been executed, the cache lines containing the
code between the end of the WBINVD instruction and before the
MTRRS have actually been disabled may be retained in the cache
hierarchy. Here, to remove code from the cache completely, a
second WBINVD instruction must be executed after the MTRRs have
been disabled.
This patch provides resolution for that.
Ideally, I will like to make changes only for Pentium 4 and Xeon
processors. But, I am not finding easier way to do it.
And, extra wbinvd() instruction does not hurt much for other
processors.
Signed-off-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mtrr_type_lookup [start:end] looked up the resultant MTRR type for that
range, based on fixed and all variable MTRR ranges. It did check for multiple
MTRR var ranges overlapping [start:end] and returned the net type.
However, if the [start:end] range spanned across any var MTRR range,
mtrr_type_lookup would return an error return of 0xFE. This was based on
typical usage of mtrr_type_lookup in PAT mapping, where region being
mapped would not normally span across MTRR ranges and also trying
to keep the code simple.
Mark recently reported the problem with this limitation. When there are
two continguous MTRR's of type "writeback" and if there is a memory mapping
over a region starting in one MTRR range and ending in another MTRR range,
such mapping will fallback to "uncached" due to the above limitation.
Change below adds support for such lookups spanning multiple MTRR ranges.
We now have a wrapper mtrr_type_lookup that dynamically splits such a region
into smaller chunks that fit within one MTRR range and does a
__mtrr_type_lookup on it and combine the results later.
Reported-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1284159350-19841-3-git-send-email-venki@google.com>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Move the MTRR type overlap check into a new function. No functional change in
this patch. Just making it easier to add multiple region overlap check in
the following patch.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <1284159350-19841-2-git-send-email-venki@google.com>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Just some dead code, no real bugs.
Found by gcc 4.6 -Wall
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <201007202219.o6KMJnQ0021072@imap1.linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Fixes bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=12558
Fixes bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=12317
(and if this really needed to be a warn you'd be responding to the bugs left
in bugzilla from it...)
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20100208100239.2568.2940.stgit@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This is part of the ops structure constification
effort started by Arjan van de Ven et al.
Benefits of this constification:
* prevents modification of data that is shared
(referenced) by many other structure instances
at runtime
* detects/prevents accidental (but not intentional)
modification attempts on archs that enforce
read-only kernel data at runtime
* potentially better optimized code as the compiler
can assume that the const data cannot be changed
* the compiler/linker move const data into .rodata
and therefore exclude them from false sharing
Signed-off-by: Emese Revfy <re.emese@gmail.com>
LKML-Reference: <4B65D712.3080804@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Fix following trivial style problems:
ERROR: trailing whitespace X 4
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: braces {} are not necessary for single statement blocks X 3
ERROR: "foo * bar" should be "foo *bar"
WARNING: line over 80 characters X 6
ERROR: "foo * bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxO)
ERROR: space required before that '-' (ctx:OxV)
WARNING: suspect code indent for conditional statements (8, 12)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: do not initialise statics to 0 or NULL
ERROR: space prohibited after that open parenthesis '(' X 2
ERROR: space prohibited before that close parenthesis ')' X 2
ERROR: trailing statements should be on next line
ERROR: return is not a function, parentheses are not required
Also use pr_debug and pr_warning where possible.
arch/x86/kernel/cpu/mtrr/generic.o:
text data bss dec hex filename
5652 77 4224 9953 26e1 generic.o.before
5652 77 4220 9949 26dd generic.o.after
The md5 changed:
b34d6c045f06daa4ed092b90cc760e8f generic.o.before.asm
a490c6251cfd8442fbffecc0e09a573d generic.o.after.asm
Because mtrr_state moved from data to bss, changing its
offsets - and also because __LINE__ numbers changed.
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Further cleanups to make the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, nmi: Use predefined numbers instead of hardcoded one
x86: asm/processor.h: remove double declaration
x86, mtrr: replace MTRRdefType_MSR with msr-index's MSR_MTRRdefType
x86, mtrr: replace MTRRfix4K_C0000_MSR with msr-index's MSR_MTRRfix4K_C0000
x86, mtrr: remove mtrr MSRs double declaration
x86, mtrr: replace MTRRfix16K_80000_MSR with msr-index's MSR_MTRRfix16K_80000
x86, mtrr: replace MTRRfix64K_00000_MSR with msr-index's MSR_MTRRfix64K_00000
x86, mtrr: replace MTRRcap_MSR with msr-index's MSR_MTRRcap
x86: mce: remove duplicated #include
x86: msr-index.h remove duplicate MSR C001_0015 declaration
x86: clean up arch/x86/kernel/tsc_sync.c a bit
x86: use symbolic name for VM86_SIGNAL when used as vm86 default return
x86: added 'ifndef _ASM_X86_IOMAP_H' to iomap.h
x86: avoid multiple declaration of kstack_depth_to_print
x86: vdso/vma.c declare vdso_enabled and arch_setup_additional_pages before they get used
x86: clean up declarations and variables
x86: apic/x2apic_cluster.c x86_cpu_to_logical_apicid should be static
x86 early quirks: eliminate unused function
Use standard msr-index.h's MSR declaration and no need to declare again.
[ Impact: cleanup, no object code change ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use standard msr-index.h's MSR declaration and no need to declare again.
[ Impact: cleanup, no object code change ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use standard msr-index.h's MSR declaration and no need to declare again
[ Impact: cleanup, no object code change ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use standard msr-index.h's MSR declaration and no need to declare again.
[ Impact: cleanup, no object code change ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use standard msr-index.h's MSR declaration and no need to declare again.
[ Impact: cleanup, no object code change ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
found one system where cpu address line is 44bits, mtrr printout
is not right:
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0 00000000 mask FF0 00000000 write-back
[ 0.000000] 1 base 10 00000000 mask FFF 80000000 write-back
[ 0.000000] 2 base 0 80000000 mask FFF 80000000 uncachable
[ 0.000000] 3 base 0 7F800000 mask FFF FF800000 uncachable
Li Zefan and Frederic pointed out the high_width could be -4 some how.
It turns out when phys_addr is 44bit, size_or_mask will be
ffffffff,00000000 so ffs(size_or_mask) will be 0.
Try to check low 32 bit, to get correct high_width.
Signed-off-by: Yinghai Lu <yinghai@kerne.org>
Also-analyzed-by: Frederic Weisbecker <fweisbec@gmail.com>
Also-analyzed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A026540.8060504@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: print out fewer lines
1. print continuous range with same type together
2. change _INFO to _DEBUG
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49BACB61.8000302@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix debug warning
Jaswinder noticed that there is a warning about smp_processor_id()
in get_mtrr().
Fix it by wrapping the printout into a get/put_cpu() pair.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49BAB7FF.4030107@kernel.org>
[ changed to get/put_cpu(), cleaned up surrounding code a it. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: bug fix + BIOS workaround
BIOS is expected to clear the SYSCFG[MtrrFixDramModEn] on AMD CPUs
after fixed MTRRs are configured.
Some BIOSes do not clear SYSCFG[MtrrFixDramModEn] on BP (and on APs).
This can lead to obfuscation in Linux when this bit is not cleared on
BP but cleared on APs. A consequence of this is that the saved
fixed-MTRR state (from BP) differs from the fixed-MTRRs of APs --
because RdDram/WrDram bits are read as zero when
SYSCFG[MtrrFixDramModEn] is cleared -- and Linux tries to sync
fixed-MTRR state from BP to AP. This implies that Linux sets
SYSCFG[MtrrFixDramEn] and activates those bits.
More important is that (some) systems change these bits in SMM when
ACPI is enabled. Hence it is racy if Linux modifies RdMem/WrMem bits,
too.
(1) The patch modifies an old fix from Bernhard Kaindl to get
suspend/resume working on some Acer Laptops. Bernhard's patch
tried to sync RdMem/WrMem bits of fixed MTRR registers and that
helped on those old Laptops. (Don't ask me why -- can't test it
myself). But this old problem was not the motivation for the
patch. (See http://lkml.org/lkml/2007/4/3/110)
(2) The more important effect is to fix issues on some more current systems.
On those systems Linux panics or just freezes, see
http://bugzilla.kernel.org/show_bug.cgi?id=11541
(and also duplicates of this bug:
http://bugzilla.kernel.org/show_bug.cgi?id=11737http://bugzilla.kernel.org/show_bug.cgi?id=11714)
The affected systems boot only using acpi=ht, acpi=off or
when the kernel is built with CONFIG_MTRR=n.
The acpi options prevent full enablement of ACPI. Obviously when
ACPI is enabled the BIOS/SMM modfies RdMem/WrMem bits. When
CONFIG_MTRR=y Linux also accesses and modifies those bits when it
needs to sync fixed-MTRRs across cores (Bernhard's fix, see (1)).
How do you synchronize that? You can't. As a consequence Linux
shouldn't touch those bits at all (Rationale are AMD's BKDGs which
recommend to clear the bit that makes RdMem/WrMem accessible).
This is the purpose of this patch. And (so far) this suffices to
fix (1) and (2).
I suggest not to touch RdDram/WrDram bits of fixed-MTRRs and
SYSCFG[MtrrFixDramEn] and to clear SYSCFG[MtrrFixDramModEn] as
suggested by AMD K8, and AMD family 10h/11h BKDGs.
BIOS is expected to do this anyway. This should avoid that
Linux and SMM tread on each other's toes ...
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: trenn@suse.de
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090312163937.GH20716@alberich.amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ying-Tsun Huang