Rename the mac_link_state() method to mac_pcs_get_state() to make it
clear that it should be returning the MACs PCS current state, which
is used for inband negotiation rather than just reading back what the
MAC has been configured for. Update the documentation to explicitly
mention that this is for inband.
We drop the return value as well; most of phylink doesn't check the
return value and it is not clear what it should do on error - instead
arrange for state->link to be false.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
PROM only enables ethernet PHY on first Origin 200 module, so we must
do it ourselves for the second module.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Generation of fake subdevice ID had vendor and device ID swapped.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Minor bugfixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl3U6E4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpi/oIAJwjsmGhheWTRa+vL/otHu1PjOQ4hziYwu/A
n80gp3pmPMa4yV5CDZt72qL4jH8llXPpH4gErvXvSyKfrvmelkJBILB53mAa04pq
BZWhkbcqldhMo35y3Ac+WcRk9zlkGq0NPuUcCb959h+pRXuZWtKWxQ2miwi413e1
1ecBRO64SvXSphflFfMMCB730aIXC/dsZAtBXqs8v+i4cIz9g8Z4fZS6c38nUA23
wBleNWylaxHn6UDRZAGRY12JFxFe3QxCP0RKTjwo0eF3HG7IZIGQKHnztjlqD4ko
ZOQmxPYW2+96XnS8n7y+gA517u10OIVZBocD9FX10c3wvS+Lpxg=
=KAuZ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull last minute virtio bugfixes from Michael Tsirkin:
"Minor bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix shrinker count
virtio_balloon: fix shrinker scan number of pages
virtio_console: allocate inbufs in add_port() only if it is needed
virtio_ring: fix return code on DMA mapping fails
rhashtable_lookup_fast() internally calls rcu_read_lock() then,
calls rhashtable_lookup(). So if rcu_read_lock() is already held,
rhashtable_lookup() is enough.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Last set of patches for v5.5. Major features here 802.11ax support for
qtnfmac and airtime fairness support to mt76. And naturally smaller
fixes and improvements all over.
Major changes:
qtnfmac
* add 802.11ax support in AP mode
* enable offload bridging support
iwlwifi
* support TX/RX antennas reporting
mt76
* mt7615 smart carrier sense support
* aggregation statistics via debugfs
* airtime fairness (ATF) support
* mt76x0 OF mac address support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJd2CicAAoJEG4XJFUm622beBYH/2zUMDpBWe10MPKB8l1Xu7k2
LkC9f89ex+EIXoh6Uun12VE3oQZG8/zinKJ5llqGqLtsNoay1gWHLydlg8VfmuaO
8oN8vpanKj4ofk1jwS8nqKz8B36SwhJMZEF5lX35YNQx7a4lK0geu3wNy8D5jiwh
8S8uBdJnHsKd/b2vBc2y/WKdyuYJhrIQleyPo7hBBQIT6CsJYLWT0LT3uA7kWmXG
gKEz/+Q92IjnE8vRbmCmvfOM5DYZbxLCRR3lebaXO/heac40bWi3JfeLFMTZR9aM
+VZtpbuvOzlAPpHlGnswKs4NlVbpUl01ST0IEEwu27W4DkFSdtnTzJIaXL1hIyk=
=1tfL
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.5
Last set of patches for v5.5. Major features here 802.11ax support for
qtnfmac and airtime fairness support to mt76. And naturally smaller
fixes and improvements all over.
Major changes:
qtnfmac
* add 802.11ax support in AP mode
* enable offload bridging support
iwlwifi
* support TX/RX antennas reporting
mt76
* mt7615 smart carrier sense support
* aggregation statistics via debugfs
* airtime fairness (ATF) support
* mt76x0 OF mac address support
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Robert Schwebel says:
====================
here is v2 of the series converting the NFC documentation from txt to
rst. Thanks to Jonathan and Dave for the input.
Changes since (implicit) v1:
* replace code-block by more compact :: syntax
* really add the rst file to the index
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Now that the sphinx syntax has been fixed, change the document from txt
to rst and add it to the index.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Silence this warning:
Documentation/networking/nfc.rst:113: WARNING: Definition list ends without
a blank line; unexpected unindent.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Fix this warning:
Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without
a blank line; unexpected unindent.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Change the block diagram to match the sphinx syntax. This will make it
possible to switch this file to rst in the future.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
The headlines in this file do are not in the standard kernel docu-
mentation headline format. Change it, so this file can be switched to
rst in the future.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"
when the speed and duplex settings are printed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
There are no users of phy_ethtool_sset() in the kernel anymore, and
as of commit 3c1bcc8614 ("net: ethernet: Convert phydev advertize
and supported from u32 to link mode"), the implementation is slightly
buggy - it doesn't correctly check the masked advertising mask as it
used to.
Remove it, and update the phy documentation to refer to its replacement
function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
This commit reverts commit 91e6015b08 ("bpf: Emit audit messages
upon successful prog load and unload") and its follow up commit
7599a896f2 ("audit: Move audit_log_task declaration under
CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs
close review on linux-audit, tests etc.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Commit 37e4c997da ("KVM: VMX: validate individual bits of guest
MSR_IA32_FEATURE_CONTROL") broke the KVM_SET_MSRS ABI by instituting
new constraints on the data values that kvm would accept for the guest
MSR, IA32_FEATURE_CONTROL. Perhaps these constraints should have been
opt-in via a new KVM capability, but they were applied
indiscriminately, breaking at least one existing hypervisor.
Relax the constraints to allow either or both of
FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX and
FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX to be set when nVMX is
enabled. This change is sufficient to fix the aforementioned breakage.
Fixes: 37e4c997da ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug
where nVMX derefences ->memslots without holding ->srcu or ->slots_lock.
The other half of nested migration, ->get_nested_state(), does not need
to acquire ->srcu as it is a purely a dump of internal KVM (and CPU)
state to userspace.
Detected as an RCU lockdep splat that is 100% reproducible by running
KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the
failing function, kvm_is_visible_gfn(), is only checking the validity of
a gfn, it's not actually accessing guest memory (which is more or less
unsupported during vmx_set_nested_state() due to incorrect MMU state),
i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any
case, setting nested state isn't a fast path so there's no reason to go
out of our way to avoid taking ->srcu.
=============================
WARNING: suspicious RCU usage
5.4.0-rc7+ #94 Not tainted
-----------------------------
include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/10939:
#0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm]
stack backtrace:
CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x68/0x9b
kvm_is_visible_gfn+0x179/0x180 [kvm]
mmu_check_root+0x11/0x30 [kvm]
fast_cr3_switch+0x40/0x120 [kvm]
kvm_mmu_new_cr3+0x34/0x60 [kvm]
nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel]
nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel]
vmx_set_nested_state+0x256/0x340 [kvm_intel]
kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm]
kvm_vcpu_ioctl+0xde/0x630 [kvm]
do_vfs_ioctl+0xa2/0x6c0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x54/0x200
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f59a2b95f47
Fixes: 8fcc4b5923 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold shared_msr_update() into its sole user to eliminate its pointless
bounds check, its godawful printk, its misleading comment (it's called
under a global lock), and its woefully inaccurate name.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The jump label out_free_1 and out_free_2 deal with
the same stuff, so git rid of one and rename the
label out_free_0a to retain the label name order.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent change inadvertently exported a static function, which results
in modpost throwing a warning. Fix it.
Fixes: cbbaa2727a ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
perf report:
Jin Yao:
- Allow entering the annotation view (symbol source/assembly +
overhead/cycles/etc column) from the 'perf report --total-cycles'
interface.
E.g.:
# perf record --all-cpus --branch-any --all-kernel
^C[ perf record: Woken up 5 times to write data ]
#
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK,
read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1,
bpf_event: 1, branch_sample_type: ANY
#
# perf report --total-cycles
#
# Samples: 78762 of event 'cycles'
Sampled Sampled Avg Avg
Cycles% Cycles Cycles% Cycles [Program Block Range] Shared Object
1.72% 95.8K 0.00% 254 [msr.h:105 -> msr.h:166] [kernel.vmlinux]
1.56% 107.6K 0.00% 618 [compiler.h:199 -> common.c:301] [kernel.vmlinux]
0.83% 46.3K 0.00% 409 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux]
0.83% 46.1K 0.00% 83 [jump_label.h:41 -> tsc.c:230] [kernel.vmlinux]
0.64% 36.9K 0.01% 1.4K [hda_intel.c:904 -> hda_intel.c:916] [snd_hda_intel]
0.57% 30.2K 0.00% 282 [file.c:710 -> file.c:730] [kernel.vmlinux]
0.48% 25.8K 0.00% 82 [spinlock.c:158 -> spinlock.c:160] [kernel.vmlinux]
0.45% 23.7K 0.00% 369 [tick-broadcast.c:585 -> tick-broadcast.c:586] [kernel.vmlinux]
0.44% 24.4K 0.00% 73 [msr.h:236 -> tsc.c:1088] [kernel.vmlinux]
0.43% 22.7K 0.00% 144 [cpuidle.c:229 -> cpuidle.c:232] [kernel.vmlinux]
Then press 'A' or Enter on one of those lines, just like with 'perf top', say
the top one: [msr.h:105 -> msr.h:166], then this shows up:
Samples: 78K of event 'cycles', 4000 Hz, Event count (approx.): 78762
native_write_msr /lib/modules/5.4.0-rc8/build/vmlinux [Percent: local period]
Percent│ IPC Cycle (Average IPC: 0.02, IPC Coverage: 50.0%)
│
│ Disassembly of section .text:
│
│ ffffffff8106c480 <native_write_msr>:
│ __wrmsr():
│ return EAX_EDX_VAL(val, low, high);
│ }
│
│ static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
│ {
│ asm volatile("1: wrmsr\n"
49.16 │0.02 mov %edi,%ecx
│0.02 mov %esi,%eax
│0.02 wrmsr
│ arch_static_branch():
│ #include <linux/stringify.h>
│ #include <linux/types.h>
│
│ static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
│ {
│ asm_volatile_goto("1:"
0.79 │0.02 nop
│ native_write_msr():
│ {
│ __wrmsr(msr, low, high);
│
│ if (msr_tracepoint_active(__tracepoint_write_msr))
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ }
50.05 │0.02 254 ← retq
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ shl $0x20,%rdx
│ mov %esi,%esi
│ or %rdx,%rsi
│ xor %edx,%edx
│ → jmpq do_trace_write_msr
We need to improve this to show the source code line numbers in the
annotation view, so one can go from that program block to the annotation view
and see those source code line numbers straight away.
auxtrace/Intel PT:
Adrian Hunter:
- Add support for AUX area sampling, requires new functionality that
will land in 5.5, its already in tip.
This includes kernel capability querying so that it fails gracefully
with older kernels, duimping aux area samples in 'perf report -D' and
'perf script'.
perf.data:
Alexey Budankov:
- Fix decompression of PERF_RECORD_COMPRESSED records.
core:
Arnaldo Carvalho de Melo:
- Use the 'dcacheline' cmp routine to find the right DSOs taking into
account the 'maj', 'min', 'ino' and 'ino_generation', that got moved
from 'struct map' to 'struct dso', where it belongs.
This further reduces the size of 'struct map', there is still more
work to do to maybe get it to max one cacheline.
libtraceevent:
Hewenliang:
- Fix memory leakage in copy_filter_type().
Sudip Mukherjee:
- Fix header installation.
perf parse:
Ian Rogers :
- Fix potential memory leak when handling tracepoint errors, found using
LLVM's libFuzzer.
perf probe:
Colin Ian King:
- Fix spelling mistake "addrees" -> "address".
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXdfz/wAKCRCyPKLppCJ+
J3nIAQDiOoX/bJRAyhsL6VVTUDzRq/tOTCzkMu43nABHfN5DAQEAnYWdfMsLZ1jm
hNZd7ogDgR/kBp0v349k+8nTQncgNwI=
=OhRG
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.5-20191122' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
Jin Yao:
- Allow entering the annotation view (symbol source/assembly +
overhead/cycles/etc column) from the 'perf report --total-cycles'
interface.
E.g.:
# perf record --all-cpus --branch-any --all-kernel
^C[ perf record: Woken up 5 times to write data ]
#
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK,
read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1,
bpf_event: 1, branch_sample_type: ANY
#
# perf report --total-cycles
#
# Samples: 78762 of event 'cycles'
Sampled Sampled Avg Avg
Cycles% Cycles Cycles% Cycles [Program Block Range] Shared Object
1.72% 95.8K 0.00% 254 [msr.h:105 -> msr.h:166] [kernel.vmlinux]
1.56% 107.6K 0.00% 618 [compiler.h:199 -> common.c:301] [kernel.vmlinux]
0.83% 46.3K 0.00% 409 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux]
0.83% 46.1K 0.00% 83 [jump_label.h:41 -> tsc.c:230] [kernel.vmlinux]
0.64% 36.9K 0.01% 1.4K [hda_intel.c:904 -> hda_intel.c:916] [snd_hda_intel]
0.57% 30.2K 0.00% 282 [file.c:710 -> file.c:730] [kernel.vmlinux]
0.48% 25.8K 0.00% 82 [spinlock.c:158 -> spinlock.c:160] [kernel.vmlinux]
0.45% 23.7K 0.00% 369 [tick-broadcast.c:585 -> tick-broadcast.c:586] [kernel.vmlinux]
0.44% 24.4K 0.00% 73 [msr.h:236 -> tsc.c:1088] [kernel.vmlinux]
0.43% 22.7K 0.00% 144 [cpuidle.c:229 -> cpuidle.c:232] [kernel.vmlinux]
Then press 'A' or Enter on one of those lines, just like with 'perf top', say
the top one: [msr.h:105 -> msr.h:166], then this shows up:
Samples: 78K of event 'cycles', 4000 Hz, Event count (approx.): 78762
native_write_msr /lib/modules/5.4.0-rc8/build/vmlinux [Percent: local period]
Percent│ IPC Cycle (Average IPC: 0.02, IPC Coverage: 50.0%)
│
│ Disassembly of section .text:
│
│ ffffffff8106c480 <native_write_msr>:
│ __wrmsr():
│ return EAX_EDX_VAL(val, low, high);
│ }
│
│ static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
│ {
│ asm volatile("1: wrmsr\n"
49.16 │0.02 mov %edi,%ecx
│0.02 mov %esi,%eax
│0.02 wrmsr
│ arch_static_branch():
│ #include <linux/stringify.h>
│ #include <linux/types.h>
│
│ static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
│ {
│ asm_volatile_goto("1:"
0.79 │0.02 nop
│ native_write_msr():
│ {
│ __wrmsr(msr, low, high);
│
│ if (msr_tracepoint_active(__tracepoint_write_msr))
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ }
50.05 │0.02 254 ← retq
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ shl $0x20,%rdx
│ mov %esi,%esi
│ or %rdx,%rsi
│ xor %edx,%edx
│ → jmpq do_trace_write_msr
We need to improve this to show the source code line numbers in the
annotation view, so one can go from that program block to the annotation view
and see those source code line numbers straight away.
auxtrace/Intel PT:
Adrian Hunter:
- Add support for AUX area sampling, requires new functionality that
will land in 5.5, its already in tip.
This includes kernel capability querying so that it fails gracefully
with older kernels, duimping aux area samples in 'perf report -D' and
'perf script'.
perf.data:
Alexey Budankov:
- Fix decompression of PERF_RECORD_COMPRESSED records.
core:
Arnaldo Carvalho de Melo:
- Use the 'dcacheline' cmp routine to find the right DSOs taking into
account the 'maj', 'min', 'ino' and 'ino_generation', that got moved
from 'struct map' to 'struct dso', where it belongs.
This further reduces the size of 'struct map', there is still more
work to do to maybe get it to max one cacheline.
libtraceevent:
Hewenliang:
- Fix memory leakage in copy_filter_type().
Sudip Mukherjee:
- Fix header installation.
perf parse:
Ian Rogers :
- Fix potential memory leak when handling tracepoint errors, found using
LLVM's libFuzzer.
perf probe:
Colin Ian King:
- Fix spelling mistake "addrees" -> "address".
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Edward Cree says:
====================
A series of changes to how we check filters for expiry, manage how much
of that work to do & when, etc.
Prompted by some pathological behaviour under heavy load, which was
Reported-by: David Ahern <dahern@digitalocean.com>
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
If there's no traffic on a channel, its ARFS expiry work will never get
scheduled by efx_poll() as that isn't being run.
So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Report the number of successful and failed insertions, and also the
current count of filters, to aid in tuning e.g. rps_flow_cnt.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
In high connection count usage, the NIC's filter table may be filled with
sufficiently many ARFS filters that further insertions fail. As this
does not represent a correctness issue, do not log the resulting MCDI
errors. Add a debug-level message under the (by default disabled)
rx_status category instead; and take the opportunity to do a little extra
expiry work.
Since there are now multiple workitems able to call __efx_filter_rfs_expire
on a given channel, it is possible for them to race and thus pass quotas
which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop
all the way around the table with quota left over.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Tested-by: David Ahern <dahern@digitalocean.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
The old rfs_filters_added method for determining the quota could potentially
allow the NIC to become filled with old filters, which never get tested for
expiry. Instead, explicitly make expiry check work depend on the number of
filters installed, and don't count checking slots without filters in as
doing work. This guarantees that each filter will be checked for expiry at
least once every thirty seconds (assuming the channel to which it belongs is
NAPI polling actively) regardless of fill level.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Tested-by: David Ahern <dahern@digitalocean.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jeff Kirsher says:
====================
This series contains updates to the ice driver only.
Bruce updates the driver to store the number of functions the device has
so that it won't have to compute it when setting safe mode capabilities.
Adds a check to adjust the reporting of capabilities for devices with
more than 4 ports, which differ for devices with less than 4 ports.
Brett adds a helper function to determine if the VF is allowed to do
VLAN operations based on the host's VF configuration. Also adds a new
function that initializes VLAN stripping (enabled/disabled) for the VF
based on the device supported capabilities. Adds a check if the vector
index is valid with the respect to the number of transmit and receive
queues configured when we set coalesce settings for DCB. Adds a check
if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX
so that VLAN 0 promiscuous rules to be removed. Add a helper macro for
a commonly used de-reference of a pointer to &pf->dev->pdev.
Jesse fixes an issue where if an invalid virtchnl request from the VF,
the driver would return uninitialized data to the VF from the PF stack,
so ensure the stack variable is initialized earlier. Add helpers to the
virtchnl interface make the reporting of strings consistent and help
reduce stack space. Implements VF statistics gathering via the kernel
ndo_get_vf_stats().
Akeem ensures we disable the state flag for each VF when its resources
are returned to the device.
Tony does additional cleanup in the driver to ensure the when we
allocate and free memory within the same function, we should not be
using devm_* variants; use regular alloc and free functions.
Henry implements code to query and set the number of channels on the
primary VSI for a PF via ethtool.
Jake cleans up needless NULL checks in ice_sched_cleanup_all().
Kevin updates the firmware API version to align with current NVM images.
v2: Added "Fixes:" tag to patch 5 commit description and added the use
of netif_is_rxfh_configured() in patch 13 to see if RSS has been
configured by the user, if so do not overwrite that configuration.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Pull input fix from Dmitry Torokhov:
"Just a single revert as RMI mode should not have been enabled for this
model [yet?]"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Rahul Lakkireddy says:
====================
This series of patches add UDP Segmentation Offload (USO) supported
by Chelsio T5/T6 NICs.
Patch 1 updates the current Scatter Gather List (SGL) DMA unmap logic
for USO requests.
Patch 2 adds USO support for NIC and MQPRIO QoS offload Tx path.
Patch 3 adds missing stats for MQPRIO QoS offload Tx path.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Implement and export UDP segmentation offload (USO) support for both
NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to
parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to
perform USO.
v2:
- Remove inline keyword from write_eo_udp_wr() in sge.c. Let the
compiler decide.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO)
requests expects the headers to be part of the descriptor and the
payload to be part of the SGL containing the DMA mapped addresses.
Hence, the DMA address in the first entry of the SGL can start after
the packet headers. Currently, unmap_sgl() tries to unmap from this
wrong offset, instead of the originally mapped DMA address.
So, use existing unmap_skb() instead, which takes originally saved DMA
addresses as input. Update all necessary Tx paths to save the original
DMA addresses, so that unmap_skb() can unmap them properly.
v2:
- No change.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock
from commit c8183f5489 ("s390/qeth: fix potential deadlock on
workqueue flush"), removed the code which was removed by commit
9897d583b0 ("s390/qeth: consolidate some duplicated HW cmd code").
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.
Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.
Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull networking fixes from David Miller:
1) Validate tunnel options length in act_tunnel_key, from Xin Long.
2) Fix DMA sync bug in gve driver, from Adi Suresh.
3) TSO kills performance on some r8169 chips due to HW issues, disable
by default in that case, from Corinna Vinschen.
4) Fix clock disable mismatch in fec driver, from Chubong Yuan.
5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan.
6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann.
7) Don't napi_disable() twice in r8152 driver, from Hayes Wang.
8) Fix SKB extension memory leak, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
r8152: avoid to call napi_disable twice
MAINTAINERS: Add myself as maintainer of virtio-vsock
udp: drop skb extensions before marking skb stateless
net: rtnetlink: prevent underflows in do_setvfinfo()
can: m_can_platform: remove unnecessary m_can_class_resume() call
can: m_can_platform: set net_device structure as driver data
hv_netvsc: Fix send_table offset in case of a host bug
hv_netvsc: Fix offset usage in netvsc_send_table()
net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN
sfc: Only cancel the PPS workqueue if it exists
nfc: port100: handle command failure cleanly
net-sysfs: fix netdev_queue_add_kobject() breakage
r8152: Re-order napi_disable in rtl8152_close
net: qca_spi: Move reset_count to struct qcaspi
net: qca_spi: fix receive buffer size check
net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode
Revert "net/ibmvnic: Fix EOI when running in XIVE mode"
net/mlxfw: Verify FSM error code translation doesn't exceed array size
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix auto group size calculation
...
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.
Commit b9b1f8d593 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:
$ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
dd: error writing 'foo': File too large
Set s_maxbytes to MAX_LFS_FILESIZE.
Fixes: b9b1f8d593 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Servers sending callback breaks to the YFS_CM_SERVICE service may
send up to YFSCBMAX (1024) fids in a single RPC. Anything over
AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger.
Remove the assert, as the count has already been checked against
the appropriate max values in afs_deliver_cb_callback and
afs_deliver_yfs_cb_callback.
Fixes: 35dbfba311 ("afs: Implement the YFS cache manager service")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JZ4760/JZ4770/JZ4775/X1000/X1500 has an abandoned huge page tlb,
this mode is not compatible with the MIPS standard, it will cause
tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
when starting the init process. write 0xa9000000 to cp0 register 5
sel 4 to disable this function to prevent getting stuck. Confirmed
by Ingenic, this operation will not adversely affect processors
without HPTLB function.
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: jiaxun.yang@flygoat.com
Cc: gregkh@linuxfoundation.org
Cc: malat@debian.org
Cc: tglx@linutronix.de
Cc: chenhc@lemote.com
Update FW API minor version to align to current value advertised
by FW in new NVM images.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The code in ice_sched_cleanup_all checks whether the port info is NULL
prior to calling ice_sched_clear_port. However, ice_sched_clear_port
already checks whether port info is non-NULL.
More importantly, it also checks whether the port structure has been
initialized by checking its port_state field as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add code to query and set the number of channels on the primary VSI for a
PF. This is accessed from the 'ethtool -l' and 'ethtool -L' commands,
respectively. Though the ice driver supports asymmetric queues report an
IRQ vector that has both Rx and Tx queues attached and is counted as a
'combined' channel.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When code reaches the "out" label, n is guaranteed to be valid so we can
unconditionally call neigh_release.
Also change the label to release_neigh to better reflect the fact that
we unconditionally free the neighbour and also match other labels
convention.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Improve mlx5e_route_lookup_ipv6 function structure by avoiding #ifdef then
return -EOPNOTSUPP in the middle of the function code.
To do so, we stub out mlx5e_tc_tun_create_header_ipv6 which is the only
caller of this helper function to avoid calling it altogether
when ipv6 is compiled out, which should also cleanup some compiler
warnings of unused variables.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor flex parser tunnel code:
- Add definition for flex parser tunneling header for VXLAN-GPE
- Use macros for VXLAN-GPE SW steering when building STE
- Refactor the code to reflect that this is a VXLAN GPE
only code and not a general flex parser code.
This also significantly simplifies addition of more
flex parser protocols, such as Geneve.
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The MODIFY_HCA_VPORT_CONTEXT uses field_selector to mask fields needed
to be written, other fields are required to be zero according to the
HW specification. The supported fields are controlled by bitfield
and limited to vport state, node and port GUIDs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Implement the VF stats gathering via the kernel via ndo_get_vf_stats().
The driver will show per-VF stats in the output of the
ip -s link show dev <PF> command.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>