btrfs_device::scrub_device is not a device which is being scrubbed,
but it holds the scrub context, so rename to reflect the same. No
functional changes here.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no other consumer for btrfs_handle_error() other than
__btrfs_handle_fs_error(), further this function quite small.
Merge it into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls
btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR
is set in btrfs_handle_error(). And there is no other user of
btrfs_handle_error() as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.
This extends btrfs to do more retries and each retry fails only one
stripe. Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.
The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.
We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.
[1]: https://patchwork.kernel.org/patch/10091755/
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_check_rw_degradable() to check against the given device if
its lost.
We can use this function to know if the volume is going to be in
degraded mode OR failed state, when the given device fails. Which is
needed when we are handling the device failed state.
A preparatory patch does not affect the flow as such.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ enhance comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>
Recent patches reworking the mount path left some unused parameters. We
pass a vfsmount to mount_subvol, the flags and data (ie. mount options)
have been already applied and we will not need them.
Signed-off-by: David Sterba <dsterba@suse.com>
Long ago, commit edf24abe51 ("btrfs: sanity mount option parsing and
early mount code") split the btrfs_parse_options() into two parts
(btrfs_parse_early_options() and btrfs_parse_options()). As a result,
btrfs_parse_optins no longer gets called twice and is the last one to
parse mount option string. Therefore there is no need to dup it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is not referenced after it has been submitted and the endio is
going to consume the sole reference on successful submission. On error,
the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't
leak it either.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is never referenced after it has been submitted so there is no
point in getting an extra reference.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio that is passsed is the newly created repair bio which already
has a reference count of 1, which is going to be consumed by the
endio routine on successful submission. On error the handler also
calls bio_put.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_get/set is necessary only if the bio is going to be referenced
following submissions. In the code paths where such calls are made
we don't really need them since the bio is referenced only if
btrfs_map_bio returns an error. And this function can return an error
prior to submission only. So referencing the bio is safe. Furthermore
we do call bio_endio which will consume the last reference. So let's
remove the redundant calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As it's a single instance and local to the file, we don't need to pass
it as an argument.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it and also make the array types explicit.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove unused arg 'holder' from parse_subvol_options(), which has been
forgotten to be cleaned in the commit b99beb110e2d ("btrfs: split
parse_early_options() in two").
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since setup_root_args() is not used anymore, just remove it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now parse_early_options() is used by both btrfs_mount() and
btrfs_mount_root(). However, the former only needs subvol related part
and the latter needs the others.
Therefore extract the subvol related parts from parse_early_options() and
move it to new parse function (parse_subvol_options()).
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup btrfs_mount() by using btrfs_mount_root(). This avoids getting
btrfs_mount() called twice in mount path.
Old btrfs_mount() will do:
0. VFS layer calls vfs_kern_mount() with registered file_system_type
(for btrfs, btrfs_fs_type). btrfs_mount() is called on the way.
1. btrfs_parse_early_options() parses "subvolid=" mount option and set the
value to subvol_objectid. Otherwise, subvol_objectid has the initial
value of 0
2. check subvol_objectid is 5 or not. Assume this time id is not 5, then
btrfs_mount() returns by calling mount_subvol()
3. In mount_subvol(), original mount options are modified to contain
"subvolid=0" in setup_root_args(). Then, vfs_kern_mount() is called with
btrfs_fs_type and new options
4. btrfs_mount() is called again
5. btrfs_parse_early_options() parses "subvolid=0" and set 5 (instead of 0)
to subvol_objectid
6. check subvol_objectid is 5 or not. This time id is 5 and mount_subvol()
is not called. btrfs_mount() finishes mounting a root
7. (in mount_subvol()) with using a return vale of vfs_kern_mount(), it
calls mount_subtree()
8. return subvolume's dentry
Reusing the same file_system_type (and btrfs_mount()) for vfs_kern_mount()
is the cause of complication.
Instead, new btrfs_mount() will do:
1. parse subvol id related options for later use in mount_subvol()
2. mount device's root by calling vfs_kern_mount() with
btrfs_root_fs_type, which is not registered to VFS by
register_filesystem(). As a result, btrfs_mount_root() is called
3. return by calling mount_subvol()
The code of 2. is moved from the first part of mount_subvol().
The semantics of device holder changes from btrfs_fs_type to
btrfs_root_fs_type and has to be used in all contexts. Otherwise we'd
get wrong results when mount and dev scan would not check the same
thing. (this has been found indendently and the fix is folded into this
patch)
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ fold the btrfs_control_ioctl fixup, extend the comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add btrfs_mount_root() and new file_system_type for preparation of cleanup
of btrfs_mount(). Code path is not changed yet.
btrfs_mount_root() is almost the same as current btrfs_mount(), but doesn't
have subvolume related part.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions called from extent_write_cache_pages used void* as generic
callback data, but all of them convert it to extent_page_data, or use it
directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_write_cache_pages is modelled after
write_cache_pages which is a generic interface and the writepage
parameter makes sense there. In btrfs we know exactly which callback
we're going to use, so we can pass it directly.
Signed-off-by: David Sterba <dsterba@suse.com>
flush_epd_write_bio is same as flush_write_bio, no point having two such
functions. Merge them to flush_write_bio. The 'noinline' attribute is
removed as it does not have any meaning.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are 2 function doing binary search on btrfs nodes:
bin_search and btrfs_bin_search. The latter being a simple wrapper for
the former. So eliminate the wrapper and just rename bin_search to
btrfs_bin_search. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree argument passed to extent_write_full_page is referenced from
the page being passed to the same function. Since we already have
enough information to get the reference, remove the function parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is called only from submit_compressed_extents and the
io tree being passed is always that of the inode. But we are also
passing the inode, so just move getting the io tree pointer in
extent_write_locked_range to simplify the signature.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code was added in 492bb6deee ("Btrfs: Hold a reference on bios
during submit_bio, add some extra bio checks"). However, holding a
reference on a bio is necessary only if it's going to be referenced
after the submit_bio returns and the bio is completed. In this
particular instance this is not the case so there is no need to hold
an extra reference since we directly return.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.
Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function was introduced by 247e743cbe ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places opencoding this conversion, add a helper now
that we have 3 compression algorithms.
Signed-off-by: David Sterba <dsterba@suse.com>
Before returning hole_em in btrfs_get_fiemap_extent we check if it's different
than null. However, by the time this null check is triggered we already know
hole_em is not null because it means it points to the em we found and it
has already been dereferenced.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
trans was statically assigned to NULL and this never changed over the
course of btrfs_get_extent. So remove any code which checks whether
trans != NULL and just hardcode the fact trans is always NULL.
Resolves-coverity-id: 112806
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of sizeof() is of type size_t, so we must print it
using the %z format modifier rather than %l to avoid this warning
on some architectures:
fs/btrfs/tree-checker.c: In function 'check_dir_item':
fs/btrfs/tree-checker.c:273:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' {aka 'unsigned int'} [-Werror=format=]
Fixes: 005887f2e3e0 ("btrfs: tree-checker: Add checker for dir item")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This changes to use struct completion directly and removes 'struct
scrub_bio_ret' along with the code using it.
This struct is used to get the return value from bio, but the caller can
access bio to get the return value directly and is holding a reference
on it so it won't go away underneath us and can be removed safely.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The defined wait is not used anywhere.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to call extent_range_clear_dirty_for_io()
on compression range to prevent application from changing
page content, while pages compressing.
extent_range_clear_dirty_for_io() runs on each loop iteration,
"(end - start)" can be much (up to 1024 times) bigger
then compression range (BTRFS_MAX_UNCOMPRESSED).
The start pointer is advanced each time we manage to compress part of
the range. The end pointer does not change so we could redirty the
remaining parts repeatedly.
Fix that behaviour by call extent_range_clear_dirty_for_io()
only once, the first time it happens.
This is the safest but probably not the best behaviour. Previous
iterations of the patch tried to redirty only the range that we were not
able to compress. This has been refused by David for safety reasons, the
writeout callchain is complex and there could be some path that relies
on redirtying the entire unwritten range.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog, the history and safety concerns, add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Slowest part of heuristic for now is kernel heap sort()
It's can take up to 55% of runtime on sorting bucket items.
As sorting will always call on most data sets to get correctly
byte_core_set_size, the only way to speed up heuristic, is to
speed up sort on bucket.
Add a general radix_sort function.
Radix sort require 2 buffers, one full size of input array
and one for store counters (jump addresses).
That increase usage per heuristic workspace +1KiB
8KiB + 1KiB -> 8KiB + 2KiB
That is LSD Radix, i use 4 bit as a base for calculating,
to make counters array acceptable small (16 elements * 8 byte).
That Radix sort implementation have several points to adjust,
I added him to make radix sort general usable in kernel,
like heap sort, if needed.
Performance tested in userspace copy of heuristic code,
throughput:
- average <-> random data: ~3500 MiB/s - heap sort
- average <-> random data: ~6000 MiB/s - radix sort
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
[ coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_FLUSH_SENT and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_MISSING and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::missing. Instead of that
declare btrfs_device::dev_state BTRFS_DEV_STATE_MISSING and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by : Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::in_fs_metadata. Instead of
that declare device state BTRFS_DEV_STATE_IN_FS_METADATA and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::writeable. Instead of that
declare device state BTRFS_DEV_STATE_WRITEABLE and use the
bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch creates a helper function to get either the rcu device path
or missing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ rename to btrfs_dev_name, switch to if/else ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can query the bdev directly when needed at btrfs_discard_extent()
so drop btrfs_device::can_discard.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function update_share_count is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
fs/btrfs/backref.c:219:6: warning: symbol 'update_share_count' was not
declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9036c10208 ("Btrfs: update hole handling v2") added the
FLAG_VACANCY to denote holes, however there was already a consistent way
of flagging extents which represent hole - ->block_start =
EXTENT_MAP_HOLE. And also the only place where this flag is checked is
in the fiemap code, but the block_start value is also checked and every
other place in the filesystem detects holes by using block_start
value's. So remove the extra flag. This survived a full xfstest run.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is no longer used outside of extent-tree.c.
Make it static.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* ZSTD_inBuffer in_buf
* ZSTD_outBuffer out_buf
are used in all functions to pass the compression parameters and the
local variables consume some space. We can move them to the workspace
and reduce the stack consumption:
zstd.c:zstd_decompress -24 (136 -> 112)
zstd.c:zstd_decompress_bio -24 (144 -> 120)
zstd.c:zstd_compress_pages -24 (264 -> 240)
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are now 20 bytes of holes, we can reduce that to 4 by minor
changes. Moving 'aborted' to the status and flags is also more logical,
similar for num_dirty_bgs. The size goes from 432 to 416.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recent updates to the structure left some holes, reorder the types so
the packing is tight. The size goes from 112 to 104 on 64bit.
Signed-off-by: David Sterba <dsterba@suse.com>
The use_count is a reference counter, we can use the refcount_t type,
though we don't use the atomicity. This is not a performance critical
code and we could catch the underflows. The type is changed from long,
but the number of references will fit an int.
Signed-off-by: David Sterba <dsterba@suse.com>
Last user was removed in a monster commit a22285a6a3
("Btrfs: Integrate metadata reservation with start_transaction") in
2010.
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of adding_csums matches bool, 'short' was most likely used
to save space in a698d0755a ("Btrfs: add a type field for the
transaction handle").
Signed-off-by: David Sterba <dsterba@suse.com>
Due to new_inline logic, the create == 0 is always true at this
point in the code, so the create != 0 branch can be removed.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace hardcoded numeric argument values for inode_only with the
constants defined for that use.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The maximum size of a checksum buffer is known, BTRFS_CSUM_SIZE, and we
don't have to allocate it dynamically. This code path is not used at all
as we have only the crc32c and use an on-stack buffer already.
Signed-off-by: David Sterba <dsterba@suse.com>
Setting plug can merge adjacent IOs before dispatching IOs to the disk
driver.
Without plug, it'd not be a problem for single disk usecases, but for
multiple disks using raid profile, a large IO can be split to several
IOs of stripe length, and plug can be helpful to bring them together
for each disk so that we can save several disk access.
Moreover, fsync issues synchronous writes, so plug can really take
effect.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, create btrfs_open_one_device() from
__btrfs_open_devices(). This is a preparatory work to add dynamic
device scan.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ minor whitespace fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes. This helps to move the entire section into
a new function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is in preparation to move a section of code in __btrfs_open_devices()
into a new function so that it can be reused. As we set seeding if any of
the device is having SB flag BTRFS_SUPER_FLAG_SEEDING, so do it in the
device list loop itself. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With gcc-4.1.2:
fs/btrfs/ref-verify.c: In function ‘btrfs_build_ref_tree’:
fs/btrfs/ref-verify.c:1017: warning: ‘root’ is used uninitialized in this function
The variable is indeed passed uninitialized, but it is never used by the
callee. However, not all versions of gcc are smart enough to notice.
Hence remove the unused parameter from walk_up_tree() to silence the
compiler warning.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass btrfs_get_extent_fiemap and get_extent_skip_holes
itself is used only as a fiemap helper.
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass btrfs_get_extent_fiemap and we don't expect anything
else in the context of extent_fiemap.
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patches cleaned up all places where
extent_page_data::get_extent was set and it was btrfs_get_extent all the
time, so we can simply call that instead.
This also reduces size of extent_page_data by 8 bytes which has positive
effect on stack consumption on various functions on the write out path.
Signed-off-by: David Sterba <dsterba@suse.com>
Since tree-checker has verified leaf when reading from disk, we don't
need the existing verify_dir_item() or btrfs_is_name_len_valid() checks.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add checker for dir item, for key types DIR_ITEM, DIR_INDEX and
XATTR_ITEM.
This checker does comprehensive checks for:
1) dir_item header and its data size
Against item boundary and maximum name/xattr length.
This part is mostly the same as old verify_dir_item().
2) dir_type
Against maximum file types, and against key type.
Since XATTR key should only have FT_XATTR dir item, and normal dir
item type should not have XATTR key.
The check between key->type and dir_type is newly introduced by this
patch.
3) name hash
For XATTR and DIR_ITEM key, key->offset is name hash (crc32c).
Check the hash of the name against the key to ensure it's correct.
The name hash check is only found in btrfs-progs before this patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers use GFP_NOFS, we don't have to pass it as an argument. The
built-in tests pass GFP_KERNEL, but they run only at module load time
and NOFS works there as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Use __clear_extent_bit directly in case we want to pass unknown
gfp flags. Otherwise all clear_extent_bit callers use GFP_NOFS, so we
can sink them to the function and reduce argument count, at the cost
that __clear_extent_bit has to be exported.
Signed-off-by: David Sterba <dsterba@suse.com>
We take the fs_devices::device_list_mutex mutex in write_all_supers
which will prevent any add/del changes to the device list. Therefore we
don't need to use the RCU variant list_for_each_entry_rcu in any of the
called functions.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read information about device counts.
Move copying fsid out of the protected section, not applicable to RCU
same as the rest of the retrieved information.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read some information:
does not change during device lifetime:
- devid
- uuid
- name (ie. the path)
may change in parallel to the ioctl call, but can lead only to reporting
inacurracy:
- bytes_used
- total_bytes
Signed-off-by: David Sterba <dsterba@suse.com>
A helper to free a device and all it's dynamically allocated members,
like the rcu_string name or flush_bio. This is going to replace all
open coded places.
Signed-off-by: David Sterba <dsterba@suse.com>
Make it clear that it is an RCU helper, we want to use the name
free_device for a wrapper freeing all device members.
Signed-off-by: David Sterba <dsterba@suse.com>
These rules have been hidden in several if-else and are not
straightforward to follow, for example, dio submit hook's nocsum case
has a bug , i.e. doing async submit instead of sync submit, which has
been fixed recently.
This is documenting the rules for reference.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 996478ca9c ("btrfs: change how we decide to commit
transactions during flushing") there is no need to hold the delayed_rsv
during the percpu_counter_compare call since we get the byte's snapshot
earlier. So hold the lock only while reading delayed_rsv.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding __init macro gives kernel a hint that this function is only used
during the initialization phase and its memory resources can be freed up
after.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_add_device() is adding the device item so rename to
reflect that in the function. Similarly we have btrfs_rm_dev_item().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain