- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
With LTO, the compiler doesn't necessarily obey the link order for
initcalls, and initcall variables need globally unique names to avoid
collisions at link time.
This change exports __KBUILD_MODNAME and adds the initcall_id() macro,
which uses it together with __COUNTER__ and __LINE__ to help ensure
these variables have unique names, and moves each variable to its own
section when LTO is enabled, so the correct order can be specified using
a linker script.
The generate_initcall_ordering.pl script uses nm to find initcalls from
the object files passed to the linker, and generates a linker script
that specifies the same order for initcalls that we would have without
LTO. With LTO enabled, the script is called in link-vmlinux.sh through
jobserver-exec to limit the number of jobs spawned.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-8-samitolvanen@google.com
Change the format of processed-schema* from yaml to json to speed up
validation. With json output, using xargs and appending the output won't
work since json has explicit list begin and end characters. Instead,
we pass the schema files as a list in a temp file.
The parsing time for the processed schema goes down from ~2sec to 70ms.
Also, 'make dtbs_check' becomes 33% faster.
Some error messages are affected by this change. For example, "True was
expected" becomes "... is not of type 'boolean'". The order of messages
is also changed.
Signed-off-by: Andrei Ziureaev <andrei.ziureaev@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
To build host programs, you need to add the program names to 'hostprogs'
to use the necessary build rule, but it is not enough to build them
because there is no dependency.
There are two types of host programs: built as the prerequisite of
another (e.g. gen_crc32table in lib/Makefile), or always built when
Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).
The latter is typical in Makefiles under scripts/, which contains host
programs globally used during the kernel build. To build them, you need
to add them to both 'hostprogs' and 'always-y'.
This commit adds hostprogs-always-y as a shorthand.
The same applies to user programs. net/bpfilter/Makefile builds
bpfilter_umh on demand, hence always-y is unneeded. In contrast,
programs under samples/ are added to both 'userprogs' and 'always-y'
so they are always built when Kbuild visits the Makefiles.
userprogs-always-y works as a shorthand.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit 2464a609de ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>
- Add the zstd and zstd22 cmds to scripts/Makefile.lib
- Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options
Architecture specific support is still needed for decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com
This reverts commit 77479b38e2.
Since commit 8a78756eb5 ("kbuild: create object directories simpler
and faster"), all directories for 'targets' are created.
'mkdir -p $(dir ${dtc-tmp})' is no longer needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.
This adds the following commits from upstream:
9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcba ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Make modules.order depend on $(obj-m), and use if_changed to build it.
This will avoid unneeded update of modules.order, which will be useful
to optimize the modpost stage.
Currently, the second pass of modpost is always invoked. By checking the
timestamp of modules.order, we can avoid the unneeded modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
built-in.a contains the built-in object paths from the current and sub
directories.
module.order collects the module paths from the current and sub
directories.
Make their build rules look more symmetrical.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
always, hostprogs-y, and hostprogs-m are deprecated.
There is no user in upstream code, but I will keep them for external
modules. I want to remove them entirely someday. Prompt downstream
users for the migration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
cmd_dtc takes the additional parameter $(2) to select the target
format, dtb or yaml. This makes things complicated when it is used
with cmd_and_fixdep and if_changed_rule. I actually stumbled on this.
See commit 3d4b223868 ("kbuild: fix DT binding schema rule again to
avoid needless rebuilds").
Extract the suffix part of the target instead of passing the parameter.
Fortunately, this works for both $(obj)/%.dtb and $(obj)/%.dt.yaml .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This omits system headers from the generated header dependency.
System headers are not updated unless you upgrade the compiler. Nor do
they contain CONFIG options, so fixdep does not need to parse them.
Having said that, the effect of this optimization will be quite small
because the kernel code generally does not include system headers
except <stdarg.h>. Host programs include a lot of system headers,
but there are not so many in the kernel tree.
At first, keeping system headers in .*.cmd files might be useful to
detect the compiler update, but there is no guarantee that <stdarg.h>
is included from every file. So, I implemented a more reliable way in
the previous commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 7a04960560 ("kbuild: fix DT binding schema rule to detect
command line changes"), this rule is every time re-run even if you change
nothing.
cmd_dtc takes one additional parameter to pass to the -O option of dtc.
We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked
from if_changed_rule is false positive.
Fixes: 7a04960560 ("kbuild: fix DT binding schema rule to detect command line changes")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.
Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes: 4f0e3a57d6 ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When compiling, Kbuild passes KBUILD_BASENAME (basename of the object)
and KBUILD_MODNAME (basename of the module).
This commit adds another one, KBUILD_MODFILE, which is the path of
the module. (or, the path of the module it would end up in if it were
compiled as a module.)
The next commit will use this to generate modules.builtin without
tristate.conf.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Both 'obj-y += foo/' and 'obj-m += foo/' request Kbuild to visit the
sub-directory foo/, but the difference is that only the former combines
foo/built-in.a into the built-in.a of the current directory because
everything in sub-directories visited by obj-m is supposed to be modular.
So, it makes sense to create built-in.a only if that sub-directory is
reachable by the chain of obj-y. Otherwise, built-in.a will not be
linked into vmlinux anyway. For the same reason, it is pointless to
compile obj-y objects in the directory visited by obj-m.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kernel Concurrency Sanitizer (KCSAN) is a dynamic data-race detector for
kernel space. KCSAN is a sampling watchpoint-based data-race detector.
See the included Documentation/dev-tools/kcsan.rst for more details.
This patch adds basic infrastructure, but does not yet enable KCSAN for
any architecture.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 40df759e2b ("kbuild: Fix build with binutils <= 2.19")
introduced ar-option and KBUILD_ARFLAGS to deal with old binutils.
According to Documentation/process/changes.rst, the current minimal
supported version of binutils is 2.21 so you can assume the 'D' option
is always supported. Not only GNU ar but also llvm-ar supports it.
With the 'D' option hard-coded, there is no more user of ar-option
or KBUILD_ARFLAGS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
KBUILD_ENABLE_EXTRA_GCC_CHECKS started as a switch to add extra warning
options for GCC, but now it is a historical misnomer since we use it
also for Clang, DTC, and even kernel-doc.
Rename it to more sensible, shorter KBUILD_EXTRA_WARN.
For the backward compatibility, KBUILD_ENABLE_EXTRA_GCC_CHECKS is still
supported (but not advertised in the documentation).
I also fixed up 'make help', and updated the documentation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Kbuild provides per-file compiler flag addition/removal:
CFLAGS_<basetarget>.o
CFLAGS_REMOVE_<basetarget>.o
AFLAGS_<basetarget>.o
AFLAGS_REMOVE_<basetarget>.o
CPPFLAGS_<basetarget>.lds
HOSTCFLAGS_<basetarget>.o
HOSTCXXFLAGS_<basetarget>.o
The <basetarget> is the filename of the target with its directory and
suffix stripped.
This syntax comes into a trouble when two files with the same basename
appear in one Makefile, for example:
obj-y += foo.o
obj-y += dir/foo.o
CFLAGS_foo.o := <some-flags>
Here, the <some-flags> applies to both foo.o and dir/foo.o
The real world problem is:
scripts/kconfig/util.c
scripts/kconfig/lxdialog/util.c
Both files are compiled into scripts/kconfig/mconf, but only the
latter should be given with the ncurses flags.
It is more sensible to use the relative path to the Makefile, like this:
obj-y += foo.o
CFLAGS_foo.o := <some-flags>
obj-y += dir/foo.o
CFLAGS_dir/foo.o := <other-flags>
At first, I attempted to replace $(basetarget) with $*. The $* variable
is replaced with the stem ('%') part in a pattern rule. This works with
most of cases, but does not for explicit rules.
For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own
explicit rules, so $* will be empty, resulting in ignoring the per-file
AFLAGS.
I introduced a new variable, target-stem, which can be used also from
explicit rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Zyngier <maz@kernel.org>
CONFIG_SHELL falls back to sh when bash is not installed on the system,
but nobody is testing such a case since bash is usually installed.
So, shell scripts invoked by CONFIG_SHELL are only tested with bash.
It makes it difficult to test whether the hashbang #!/bin/sh is real.
For example, #!/bin/sh in arch/powerpc/kernel/prom_init_check.sh is
false. (I fixed it up)
Besides, some shell scripts invoked by CONFIG_SHELL use bash-extension
and #!/bin/bash is specified as the hashbang, while CONFIG_SHELL may
not always be set to bash.
Probably, the right thing to do is to introduce BASH, which is bash by
default, and always set CONFIG_SHELL to sh. Replace $(CONFIG_SHELL)
with $(BASH) for bash scripts.
If somebody tries to add bash-extension to a #!/bin/sh script, it will
be caught in testing because /bin/sh is a symlink to dash on some major
distributions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Makefile.lib is included by Makefile.modfinal as well as Makefile.build.
Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c
in Makefile.modfinal. Move modkern_cflags as well for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, Kbuild treats an object as multi-used when any of
$(foo-objs), $(foo-y), $(foo-m) is set. It makes more sense to
check $(foo-) as well.
In the context of foo-$(CONFIG_FOO_FEATURE1), CONFIG_FOO_FEATURE1
could be unset.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Flex and bison are used for kconfig, dtc, genksyms, all of which are
host programs. I never imagine the kernel embeds a parser or a lexer.
Move the flex and bison rules to scripts/Makefile.host. This file is
included only when hostprogs-y etc. is present in the Makefile in the
directory. So, parsing these rules are skipped in most of directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We generally expect bison to create not only a C file, but also a
header, which will be included from the lexer.
Currently, Kbuild generates them in separate rules. So, for instance,
when building Kconfig, you will notice bison is invoked twice:
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.h
HOSTCC scripts/kconfig/lexer.lex.o
YACC scripts/kconfig/parser.tab.c
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTLD scripts/kconfig/conf
Make handles such cases nicely in pattern rules [1]. Merge the two
rules so that one invokcation of bison can generate both of them.
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.[ch]
HOSTCC scripts/kconfig/lexer.lex.o
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTLD scripts/kconfig/conf
[1] Pattern rule
GNU Make manual says:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is unused since commit 9f69a496f1 ("kbuild: split out *.mod out
of {single,multi}-used-m rules").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It will be useful to control the header-test by a tristate option.
If CONFIG_FOO is a tristate option, you can write like this:
header-test-$(CONFIG_FOO) += foo.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
A missing compression utility or other errors were not picked up by make
and an empty kernel image was produced. By removing the &&, errors will
no longer be ignored.
Signed-off-by: Harald Seiler <hws@denx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my view, most of headers can be self-contained. So, it would be
tedious to add every header to header-test-y explicitly. We usually
end up with "all headers with some exceptions".
There are two types in exceptions:
[1] headers that are never compiled as standalone units
For examples, include/linux/compiler-gcc.h is not intended for
direct inclusion. We should always exclude such ones.
[2] headers that are conditionally compiled as standalone units
Some headers can be compiled only for particular architectures.
For example, include/linux/arm-cci.h can be compiled only for
arm/arm64 because it requires <asm/arm-cci.h> to exist.
Clang can compile include/soc/nps/mtm.h only for arc because
it contains an arch-specific register in inline assembler.
So, you can write Makefile like this:
header-test- += linux/compiler-gcc.h
header-test-$(CONFIG_ARM) += linux/arm-cci.h
header-test-$(CONFIG_ARM64) += linux/arm-cci.h
header-test-$(CONFIG_ARC) += soc/nps/mtm.h
The new syntax header-test-pattern-y will be useful to specify
"the rest".
The typical usage is like this:
header-test-pattern-y += */*.h
This will add all the headers in sub-directories to the test coverage,
excluding $(header-test-). In this regards, header-test-pattern-y
behaves like a weaker variant of header-test-y.
Caveat:
The patterns in header-test-pattern-y are prefixed with $(srctree)/$(src)/
but not $(objtree)/$(obj)/. Stale generated headers are often left over
when you traverse the git history without cleaning. Wildcard patterns for
$(objtree) may match to stale headers, which could fail to compile.
One pitfall is $(srctree)/$(src)/ and $(objtree)/$(obj)/ point to the
same directory for in-tree building. So, header-test-pattern-y should
be used with care since it can potentially match to stale headers.
Caveat2:
You could use wildcard for header-test-. For example,
header-test- += asm-generic/%
... will exclude headers in asm-generic directory. Unfortunately, the
wildcard character is '%' instead of '*' here because this is evaluated
by $(filter-out ...) whereas header-test-pattern-y is evaluated by
$(wildcard ...). This is a kludge, but seems useful in some places...
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Linus Torvalds