The control device is an abstraction of the control connection over
which a greybus manifest is retrieved. As interfaces switch modes (e.g.
after boot-over-unipro) they expose new manifests, which can contain
different vendor and product strings.
Eventually control devices will be deregistered and recreated after an
interface mode switch, while the interface itself remains registered.
Note that only interfaces of type greybus will have control devices.
Specifically, dummy interfaces will not.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make sure to register also the control device along with any bundles
when registering an interface.
Note that we currently ignore failures to register the control device
just as we do for bundle devices.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make the control object be a greybus device.
The control device will be used to expose attributes specific to
greybus-type interfaces.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move the timesync-operation functions above the control-object
management functions, which is where all other operation implementations
reside.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A number of data in TimeSync command structures are declared __u64/__u32
instead of __le64/__le32, I forgot to put this through an x86_64 compile
before presentation for merge and as a result didn't catch this error. This
patch fixes.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up handling of the ES3-bootrom quirks by adding an interface
quirk-flags field that is set appropriately when we detect that the ES3
bootrom is running.
Note that we need to reserve the DME_DIS_UNIPRO_BOOT_STARTED and
DME_DIS_FALLBACK_UNIPRO_BOOT_STARTED status values for the ES3 bootrom,
which does not support any CPort features (unlike later boot stages).
Add a BOOTROM infix to the defines to make this more clear.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This converts all drivers to use the gb_connection_get_data() and
gb_connection_set_data() functions to make it a bit more explicit as to
what is going on.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.
Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
u32 strobe_delay, u32 refclk)
Informs an Interface to expect count TimeSync strobe pulses with
strobe_delay milliseconds delay between each strobe. Once enabled
an Interface may not enter a low-power mode which will result in the
reference timer used to track time switching off.
- control.c::timesync_disable(void)
Commands an Interface to immediately halt TimeSync logic. This will allow
an Interface to transition into low-power modes where the reference time
being used for TimeSync may switch off.
- control.c::timesync_authoritative(u64 *frame_time, u8 count)
Used by the AP Module to inform an Interface of the authoritative
TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
shall adjust their local frame-time appropriately based on the
diseminated authoritative frame-time.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_control_get_version() is not used outside of the file and must be
marked as static. Following sparse warnings are reported today:
greybus/control.c:20:5: warning: symbol 'gb_control_get_version' was not declared. Should it be static?
Fix it by marking gb_control_get_version() 'static'.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Return an ERR_PTR on errors when creating connections.
This allows driver probe to fail with a more informative error message
as not all connection creation errors are due to memory exhaustion.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add dedicated helper to create control connections.
This will allow us to simplify the generic (dynamic) interface.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add bundle-version operation to fetch the version of the bundle class.
Retrieve the bundle version of all bundles when initialising the
interface in case the control-protocol version is greater than 0.1.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Drop dependency on the legacy protocol abstraction.
Instead implement the protocol-specific version request directly, and
use the new interface for managing the control connection.
Note that the version request is being removed from most protocols, but
we need to keep the current request for the control protocol as-is
indefinitely to maintain backwards compatibility (e.g. with the ES2/ES3
bootrom).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove control-protocol version from the exported protocol definitions
as it is an implementation detail that makes no sense to export.
Currently gbsim uses the kernel's control-protocol version definitions
directly instead of reporting the version of the protocol it actually
implements.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove the legacy protocol flags that were used to suppress the
connected and disconnected events.
Instead send the connected and disconnected event for all bundle
connections and explicitly exclude static connections and control
connections.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename legacy connection init and exit functions.
This is a step towards removing the legacy-protocol handling from core.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The version of the currently running firmware on the module is useful
for userspace as it can be used to find if an update is available or
not. This patch fetches interface's version with a new control operation
and exposes the same in userspace.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We already have macro's defined for this, use them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up control-connection handling by managing it through the control
structure and a higher-level control interface. Also make both the
control structure and connection lifetimes coincide with that of the
interface.
The control connection is now only enabled and disabled when the
interface is initialised and removed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The control bundle is going away so update the code.
Also remove defensive WARN_ON which would not just warn if our
implementation is broken, but also leak further memory unnecessarily.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove request handler for control protocol that makes no sense as we do
not have any incoming control requests defined.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We are removing struct device from the gb_connection structure in the
near future. The gb_bundle structure's struct device should be used as
a replacement.
This patch moves the control code to use the bundle pointer instead
of the connection pointer for printing out error messages.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
This helps in removing special per-protocol code, with the help of
generic flags passed by protocol drivers.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Response allocation also needs a GFP-flags argument as a response is
allocated as part of an outgoing operation.
Fixes: 9aa174d202e5 ("operation: allow atomic operation allocations")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to write simple init/exit routines, use
gb_builtin_protocol_driver().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add control protocol driver that is responsible for handling operations
on control CPort. The AP also needs to support incoming requests on its
control port. Features not implemented yet are marked as TODO for now.
NOTE: This also fixes cport-bundle-id to 0 and cport-id to 2 for control
protocol.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
