When CONFIG_ARM_LPAE is set, the PMD dump relies on the software
read-only bit to determine whether a page is writable. This
concealed a bug which left the kernel text section writable
(AP2=0) while marked read-only in the software bit.
In a kernel with the AP2 bug, the dump looks like this:
---[ Kernel Mapping ]---
0xc0000000-0xc0200000 2M RW NX SHD
0xc0200000-0xc0600000 4M ro x SHD
0xc0600000-0xc0800000 2M ro NX SHD
0xc0800000-0xc4800000 64M RW NX SHD
The fix is to check that the software and hardware bits are both
set before displaying "ro". The dump then shows the true perms:
---[ Kernel Mapping ]---
0xc0000000-0xc0200000 2M RW NX SHD
0xc0200000-0xc0600000 4M RW x SHD
0xc0600000-0xc0800000 2M RW NX SHD
0xc0800000-0xc4800000 64M RW NX SHD
Fixes: ded9477984 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE")
Signed-off-by: Philip Derrin <philip@cog.systems>
Tested-by: Neil Dick <neil@cog.systems>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Make the decompressor debug output user selectable, otherwise merely
enabling DEBUG_LL causes the decompressor to become board specific,
thereby preventing a multi-platform kernel from booting. Enabling
DEBUG_LL doesn't cause the kernel itself to become platform specific
unless EARLY_PRINTK is enabled, or one of the debugging routines is
added in a path that results in it being called.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Ensure that get_user_pages_fast() is not able to access memory which
has been mapped with PROT_NONE.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
commit 3179f62001 ("ALSA: core: add .get_time_info") had a side effect
of changing the behaviour of the PCM runtime tstamp. Prior to this
change tstamp was not updated by snd_pcm_update_hw_ptr0() unless the
hw_ptr had moved, after this change tstamp was always updated.
For an application using alsa-lib, doing snd_pcm_readi() followed by
snd_pcm_status() to estimate the age of the read samples by subtracting
status->avail * [sample rate] from status->tstamp this change degraded
the accuracy of the estimate on devices where the pcm hw does not
provide a granular hw_ptr, e.g., devices using
soc-generic-dmaengine-pcm.c and a dma-engine with residue_granularity
DMA_RESIDUE_GRANULARITY_DESCRIPTOR. The accuracy of the estimate
depended on the latency between the PCM hw completing a period and the
driver called snd_pcm_period_elapsed() to notify ALSA core, typically
determined by interrupt handling latency. After the change the accuracy
of the estimate depended on the latency between the PCM hw completing a
period and the application calling snd_pcm_status(), determined by the
scheduling of the application process. The maximum error of the
estimate is one period length in both cases, but the error average and
variance is smaller when it depends on interrupt latency.
Instead of always updating tstamp, update it only if audio_tstamp
changed.
Fixes: 3179f62001 ("ALSA: core: add .get_time_info")
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Henrik Eriksson <henrik.eriksson@axis.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* straggler timer conversions from Kees
* memory leak fix in hwsim
* fix some fallout from regdb changes if wireless is built-in
* also free aggregation sessions in startup state when station
goes away, to avoid crashing the timer
-----BEGIN PGP SIGNATURE-----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=jcSa
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A few things:
* straggler timer conversions from Kees
* memory leak fix in hwsim
* fix some fallout from regdb changes if wireless is built-in
* also free aggregation sessions in startup state when station
goes away, to avoid crashing the timer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0115552eac ("nfp: remove false positive offloads
in flower vxlan") missed adding kdoc for a new parameter
of nfp_flower_add_offload().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the function tipc_group_filter_msg() finds that a member event
indicates that the member is leaving the group, it first deletes the
member instance, and then purges the message queue being handled
by the call. But the message queue is an aggregated field in the
just deleted item, leading the purge call to access freed memory.
We fix this by swapping the order of the two actions.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development
board (EVB). The USB id is added to qmi_wwan.c to allow QMI
communication with the BG96.
Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some systems, when we unsplit a port we need to re-create two ports
instead. On other systems, only one needs to be re-created.
Do not try to create a port if during driver initialization it was
assigned a negative module number, which is invalid.
This avoids the following error during unsplit:
[ 941.012478] mlxsw_spectrum 0000:01:00.0: Port 43: Failed to map module
The error is harmless and caused by the fact that a local port is
already mapped to module 0.
Fixes: be94535f95 ("mlxsw: spectrum: Make split flow match firmware requirements")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It used to be that unconfined would never attach. However that is not
the case anymore as some special profiles can be marked as unconfined,
that are not the namespaces unconfined profile, and may have an
attachment.
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Profiles that have an undecidable overlap in their attachments are
being incorrectly handled. Instead of failing to attach the first one
encountered is being used.
eg.
profile A /** { .. }
profile B /*foo { .. }
have an unresolvable longest left attachment, they both have an exact
match on / and then have an overlapping expression that has no clear
winner.
Currently the winner will be the profile that is loaded first which
can result in non-deterministic behavior. Instead in this situation
the exec should fail.
Fixes: 898127c34e ("AppArmor: functions for domain transitions")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fixes: d07881d2ed ("apparmor: move new_null_profile to after profile lookup fns()")
Reported-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The boolean variable 'stop' is being set but never read. This
is a redundant variable and can be removed.
Cleans up clang warning: Value stored to 'stop' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
gcc-4.4 points out suspicious code in compute_mnt_perms, where
the aa_perms structure is only partially initialized before getting
returned:
security/apparmor/mount.c: In function 'compute_mnt_perms':
security/apparmor/mount.c:227: error: 'perms.prompt' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.hide' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.cond' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.complain' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.stop' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.deny' is used uninitialized in this function
Returning or assigning partially initialized structures is a bit tricky,
in particular it is explicitly allowed in c99 to assign a partially
initialized structure to another, as long as only members are read that
have been initialized earlier. Looking at what various compilers do here,
the version that produced the warning copied uninitialized stack data,
while newer versions (and also clang) either set the other members to
zero or don't update the parts of the return buffer that are not modified
in the temporary structure, but they never warn about this.
In case of apparmor, it seems better to be a little safer and always
initialize the aa_perms structure. Most users already do that, this
changes the remaining ones, including the one instance that I got the
warning for.
Fixes: fa488437d0f9 ("apparmor: add mount mediation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Export the symbol chip_to_vas_id() to fix a build failure when
CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV=m.
Fixes: d4ef61b5e8 ("powerpc/vas, nx-842: Define and use chip_to_vas_id()")
Reported-by: Haren Myneni <hbabu@us.ibm.com>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ath.git fixes for 4.15. Major changes:
ath10k
* fix CCMP-256, GCMP and GCMP-256 in raw mode, they never worked with raw mode
wcn36xx
* fix device tree node search
And move them to xfs_linux.h so that xfsprogs can stub them out more
easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
found the issue by kmemleak.
unreferenced object 0xffff8800674611c0 (size 16):
xfs_iext_insert+0x82a/0xa90 [xfs]
xfs_bmap_add_extent_hole_delay+0x1e5/0x5b0 [xfs]
xfs_bmapi_reserve_delalloc+0x483/0x530 [xfs]
xfs_file_iomap_begin+0xac8/0xd40 [xfs]
iomap_apply+0xb8/0x1b0
iomap_file_buffered_write+0xac/0xe0
xfs_file_buffered_aio_write+0x198/0x420 [xfs]
xfs_file_write_iter+0x23f/0x2a0 [xfs]
__vfs_write+0x23e/0x340
vfs_write+0xe9/0x240
SyS_write+0xa1/0x120
do_syscall_64+0xda/0x260
Signed-off-by: Shu Wang <shuwang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
write() is marked as having a must-check return value. Check it and
abort if we fail to write an error message from a signal handler.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001232.94813E58@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'si_pkey' is now #defined to be the name of the new siginfo field that
protection keys uses. Rename it not to conflict.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001231.DFFC8285@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MPX hardware data structurse are defined in a weird way: they define
their size in bytes and then union that with the type with which we want
to access them.
Yes, this is weird, but it does work. But, new GCC's complain that we
are accessing the array out of bounds. Just make it a zero-sized array
so gcc will stop complaining. There was not really a bug here.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001229.58A7933D@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that CPUs that implement Memory Protection Keys are publicly
available we can be a bit less oblique about where it is available.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001228.DC748A10@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trivial fix to spelling mistake in comment and also with text in
audit_resource call.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
It doesn't cause a run-time bug, but these bitfields should be unsigned.
When it's signed ->dl_throttled is set to either 0 or -1, instead of
0 and 1 as expected.
The sched.h file is included into tons of places so Sparse generates
a flood of warnings like this:
./include/linux/sched.h:477:54: error: dubious one-bit signed bitfield
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Cc: luca abeni <luca.abeni@santannapisa.it>
Link: http://lkml.kernel.org/r/20171013070121.dzcncojuj2f4utij@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- convert timers to use timer_setup() (Kees Cook, Thierry Reding)
- fix panels support on iMX boards in mxsfb driver (Stefan Agner)
- fix timeout on EDID read in udlfb driver (Ladislav Michl)
- add missing modes to fix out of bounds access in controlfb driver
(Geert Uytterhoeven)
- update initialisation paths in sa1100fb driver to be more robust
(Russell King)
- fix error handling path of ->probe method in au1200fb driver
(Christophe JAILLET)
- fix handling of cases when either panel or crt is defined in sm501fb
driver (Sudip Mukherjee, Colin Ian King)
- add ability to the Goldfish FB driver to be recognized by OS via DT
(Aleksandar Markovic)
- structures constifications (Bhumika Goyal)
- misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)
- misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)
- remove dead igafb driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=afFm
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here (though removal of the dead igafb
driver stands out in diffstat).
Summary:
- convert timers to use timer_setup() (Kees Cook, Thierry Reding)
- fix panels support on iMX boards in mxsfb driver (Stefan Agner)
- fix timeout on EDID read in udlfb driver (Ladislav Michl)
- add missing modes to fix out of bounds access in controlfb driver
(Geert Uytterhoeven)
- update initialisation paths in sa1100fb driver to be more robust
(Russell King)
- fix error handling path of ->probe method in au1200fb driver
(Christophe JAILLET)
- fix handling of cases when either panel or crt is defined in
sm501fb driver (Sudip Mukherjee, Colin Ian King)
- add ability to the Goldfish FB driver to be recognized by OS via DT
(Aleksandar Markovic)
- structures constifications (Bhumika Goyal)
- misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)
- misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)
- remove dead igafb driver"
* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
video: fbdev: sm501fb: fix potential null pointer dereference on fbi
fbcon: Initialize ops->info early
video: fbdev: Convert timers to use timer_setup()
video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
fbdev: controlfb: Add missing modes to fix out of bounds access
video: fbdev: sis_main: mark expected switch fall-throughs
video: fbdev: cirrusfb: mark expected switch fall-throughs
video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
video: fbdev: intelfb: remove redundant variables
video/fbdev/dnfb: Use common error handling code in dnfb_probe()
sm501fb: suspend and resume fb if it exists
sm501fb: unregister framebuffer only if registered
sm501fb: deallocate colormap only if allocated
video: goldfishfb: Add support for device tree bindings
Documentation: Add device tree binding for Goldfish FB driver
video: udlfb: Fix read EDID timeout
video: fbdev: remove dead igafb driver
video: fbdev: mxsfb: fix pixelclock polarity
...
Print a rate-limited warning when a user-space program attempts to execute
any of the instructions that UMIP protects (i.e., SGDT, SIDT, SLDT, STR
and SMSW).
This is useful, because when CONFIG_X86_INTEL_UMIP=y is selected and
supported by the hardware, user space programs that try to execute such
instructions will receive a SIGSEGV signal that they might not expect.
In the specific cases for which emulation is provided (instructions SGDT,
SIDT and SMSW in protected and virtual-8086 modes), no signal is
generated. However, a warning is helpful to encourage updates in such
programs to avoid the use of such instructions.
Warnings are printed via a customized printk() function that also provides
information about the program that attempted to use the affected
instructions.
Utility macros are defined to wrap umip_printk() for the error and warning
kernel log levels.
While here, replace an existing call to the generic rate-limited pr_err()
with the new umip_pr_err().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1511233476-17088-1-git-send-email-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The function checks non-powerplay structures so regressed when
the pp_enabled check was removed. This should ideally be
implemented similarly for powerplay.
Fixes: 6d07fe7bca ("drm/amdgpu: delete pp_enable in adev")
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jakub Kicinski says:
====================
This series addresses some late comments and moves checking if program
has been loaded for the correct device to the drivers. There are also
some problems with net namespaces which I didn't take into consideration.
On the kernel side we will now simply ignore namespace moves. Since the
user space API is not reporting any namespace identification we have to
remove the ifindex until a correct way of reporting is agreed upon.
v2:
- fix ext ack reporting for XDP (David A);
- add Jiri's Ack.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Header implementation of bpf_prog_offload_verifier_prep() which
is used if CONFIG_NET=n should be a static inline.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This reverts commit bd601b6ada ("bpf: report offload info to user
space"). The ifindex by itself is not sufficient, we should provide
information on which network namespace this ifindex belongs to.
After considering some options we concluded that it's best to just
remove this API for now, and rework it in -next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This reverts commit 928631e054 ("bpftool: print program device bound
info"). We will remove this API and redo it right in -next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are currently destroying the device offload state when device
moves to another net namespace. This doesn't break with current
NFP code, because offload state is not used on program removal,
but it's not correct behaviour.
Ignore the device unregister notifications on namespace move.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_prog_get_type() is identical to bpf_prog_get_type_dev(),
with false passed as attach_drv. Instead of keeping it as
an exported symbol turn it into static inline wrapper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently device-bound programs are not able to run on the host
to save resources (host JIT is not invoked). Don't allow XDP
programs to be attached without the HW_MODE flag. In theory
if program is already translated for device offload the driver
should choose to offload it instead of loading it in the driver.
However, offloading translated program may still fail resulting
in device-bound program being run on the host.
Prevent this by refusing to attach device bound programs if
XDP_FLAGS_HW_MODE is not set.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With TC shared block changes we can't depend on correct netdev
pointer being available in cls_bpf. Move the device validation
to the driver. Core will only make sure that offloaded programs
are always attached in the driver (or in HW by the driver). We
trust that drivers which implement offload callbacks will perform
necessary checks.
Moving the checks to the driver is generally a useful thing,
in practice the check should be against a switchdev instance,
not a netdev, given that most ASICs will probably allow using
the same program on many ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_target_prog seems long and clunky, rename it to prog_ifindex.
We don't want to call this field just ifindex, because maps
may need a similar field in the future and bpf_attr members for
programs and maps are unnamed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are currently only allowing attachment of device-bound
cls_bpf and XDP programs. Make this restriction explicit in
the BPF offload code. This way we can potentially reuse the
ifindex field in the future.
Since XDP and cls_bpf programs can only be loaded by admin,
we can drop the explicit capability check from offload code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Offload state may get destroyed either because the device for which
it was constructed is going away, or because the refcount of bpf
program itself has reached 0. In both of those cases we will call
__bpf_prog_offload_destroy() to unlink the offload from the device.
We may in fact call it twice, which works just fine, but we should
make clear this is intended and caution others trying to extend the
function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
resulted in unexpected data truncation
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Improve the bindings text by doing the following changes:
- Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware
- Add 'clocks' to the list of required properties
- Explain that the optional security violation irq is the second entry
- Use the real unit address and irq numbers for i.MX25
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Juergen Borleis <jbe@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The Dell SMBIOS WMI interface will fail for some more complex calls unless
a WMI hotfix has been included. Most platforms have this fix available in
a maintenance BIOS release. In the case the driver is loaded on a
platform without this fix, disable the userspace interface.
A hotfix indicator is present in the dell-wmi-descriptor that represents
whether or not more complex calls will work properly.
"Simple" calls such as those used by dell-laptop and dell-wmi will continue
to work properly so dell-smbios-wmi should not be blocked from binding and
being used as the dell-smbios dispatcher.
Suggested-by: Girish Prakash <girish.prakash@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Implement a '-none' output mode for kernel-doc which will only output
warning messages, and suppresses the warning message about there being
no kernel-doc in the file.
If the build has requested additional warnings, automatically check all
.c files. This patch does not check .h files. Enabling the warning
by default would add about 1300 warnings, so it's default off for now.
People who care can use this to check they didn't break the docs and
maybe we'll get all the warnings fixed and be able to enable this check
by default in the future.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This device's bindings are not trivial: Additional properties are
documented in in Documentation/devicetree/bindings/mfd/mc13xxx.txt.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
It isn't clear if this function of_node_put()s the 'from'
argument, or the node it searches. Clearly indicate which
variable is touched. Fold in some more fixes from Randy too
because we're in the area.
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Philip Derrin