Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com
Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com
Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for data length code modifications for Classical CAN.
The netlink configuration interface always allowed to pass any value
that fits into a byte, therefore only the modification process had to be
extended to handle the raw DLC represenation of Classical CAN frames.
When a DLC value from 0 .. F is provided for Classical CAN frame
modifications the 'len' value is modified as-is with the exception that
potentially existing 9 .. F DLC values in the len8_dlc element are moved
to the 'len' element for the modification operation by mod_retrieve_ccdlc().
After the modification the Classical CAN frame DLC information is brought
back into the correct format by mod_store_ccdlc() which is filling 'len'
and 'len8_dlc' accordingly.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201119084921.2621-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The naming of can_dlc as element of struct can_frame and also as variable
name is misleading as it claims to be a 'data length CODE' but in reality
it always was a plain data length.
With the indroduction of a new 'len' element in struct can_frame we can now
remove can_dlc as name and make clear which of the former uses was a plain
length (-> 'len') or a data length code (-> 'dlc') value.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net
[mkl: gs_usb: keep struct gs_host_frame::can_dlc as is]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In canfd_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CANFD_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: d468984688 ("can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-3-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In can_rcv(), cfd->len is uninitialized when skb->len = 0, and this
uninitialized cfd->len is accessed nonetheless by pr_warn_once().
Fix this uninitialized variable access by checking cfd->len's validity
condition (cfd->len > CAN_MAX_DLEN) separately after the skb->len's
condition is checked, and appropriately modify the log messages that
are generated as well.
In case either of the required conditions fail, the skb is freed and
NET_RX_DROP is returned, same as before.
Fixes: 8cb68751c1 ("can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once")
Reported-by: syzbot+9bcb0c9409066696d3aa@syzkaller.appspotmail.com
Tested-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201103213906.24219-2-anant.thazhemadam@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Don't populate the const array plen on the stack but instead it static. Makes
the object code smaller by 926 bytes.
Before:
text data bss dec hex filename
26531 1943 64 28538 6f7a net/can/isotp.o
After:
text data bss dec hex filename
25509 2039 64 27612 6bdc net/can/isotp.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201020154203.54711-1-colin.king@canonical.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As reported by Thomas Wagner:
https://github.com/hartkopp/can-isotp/issues/34
the timeout handling for data frames is not enabled when the isotp socket is
used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled
by the isotpsniffer application which therefore became inconsistend with the
strict rx timeout rules when running the isotp protocol in the operational
mode.
This patch fixes this inconsistency by moving the return condition for the
listen-only mode behind the timeout handling code.
Reported-by: Thomas Wagner <thwa1@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/34
Link: https://lore.kernel.org/r/20201019120229.89326-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can.rst.
Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.
But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.
To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120 1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever
This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1599460308-18770-1-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc()
will trigger a warning:
WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0
Kernel panic - not syncing: panic_on_warn set ...
Fix to return early from can_remove_proc() if can proc_dir does not exists.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1594709090-3203-1-git-send-email-zhangchangzhong@huawei.com
Fixes: 8e8cda6d73 ("can: initial support for network namespaces")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.
In both cases code was added on both sides in the same place
so just keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add the initialization of skbcnt, similar to:
e009f95b15 can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt
Let's play save and initialize this skbcnt as well.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This fixes an uninit-value warning:
BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650
Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN Transport Protocols offer support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers.
As CAN frames can only transport a small amount of data bytes
(max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
segmentation is needed to transport longer PDUs as needed e.g. for
vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
This protocol driver implements data transfers according to
ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net
[mkl: Removed "WITH Linux-syscall-note" from isotp.c.
Fixed indention, a checkpatch warning and typos.
Replaced __u{8,32} by u{8,32}.
Removed always false (optlen < 0) check in isotp_setsockopt().]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Error queue are not yet implemented in CAN-raw sockets.
The problem: a userland call to recvmsg(soc, msg, MSG_ERRQUEUE) on a
CAN-raw socket would unqueue messages from the normal queue without
any kind of error or warning. As such, it prevented CAN drivers from
using the functionalities that relies on the error queue such as
skb_tx_timestamp().
SCM_CAN_RAW_ERRQUEUE is defined as the type for the CAN raw error
queue. SCM stands for "Socket control messages". The name is inspired
from SCM_J1939_ERRQUEUE of include/uapi/linux/can/j1939.h.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20200926162527.270030-1-mailhol.vincent@wanadoo.fr
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the kernel doc for can_rcv_list_find() which was broken in commit:
3ee6d2bebe ("can: af_can: rename find_rcv_list() to can_rcv_list_find()")
while renaming a variable, but forgetting to rename the kernel doc, too.
Link: http://lore.kernel.org/r/20201006203748.1750156-2-mkl@pengutronix.de
Fixes: 3ee6d2bebe ("can: af_can: rename find_rcv_list() to can_rcv_list_find()")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The "WITH Linux-syscall-note" exception is intended for UAPI headers.
See LICENSES/exceptions/Linux-syscall-note
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.
At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.
With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.
After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.
The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.
Bail out if no ml_priv is allocated.
Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.
If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).
Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.
This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.
Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.
To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123
This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message
With this patch we add additional check to make sure, related skb is own
echo message.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just check for a NULL method instead of wiring up
sock_no_{get,set}sockopt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple fixes which require no deep knowledge of the code.
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
j1939_session_destroy() and __j1939_priv_release() should be called only
if session, ecu or socket are not linked or used by any one else. If at
least one of these resources is linked, then the reference counting is
broken somewhere.
This warning will be triggered before KASAN will do, and will make it
easier to debug initial issue. This works on platforms without KASAN
support.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
This part of the code protected by lock used in the hrtimer as well.
Using hrtimer_cancel() will trigger dead lock.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
We link the socket to the session to be able provide socket specific
notifications. For example messages over error queue.
We need to keep the socket held, while we have a reference to it.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
j1939_session_cancel() was modifying session->state without protecting
it by locks and without checking actual state of the session.
This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel()
and adds the missing locking.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL.
Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
This patch delays the j1939_priv_put() until the socket is destroyed via
the sk_destruct callback, to avoid use-after-free problems.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
In j1939 we need our own struct sock::sk_destruct callback. Export the
generic af_can can_sock_destruct() that allows us to chain-call it.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
We were sending malformed EOMA with total message size set to 0. This
issue has been fixed in the previous patch.
In this patch a sanity check is added to the RX path and a error message
is displayed.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We were sending malformed EOMA messageswith total message size set to 0.
This patch fixes the bug.
Reported-by: https://github.com/linux-can/can-utils/issues/159
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Filters array is coped from user space and linked to the j1939 socket.
On socket release this memory was not freed.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>