While the timesync protocol was a great idea, it never ended up getting
implemented by any known hardware devices. It's also a bit
"interesting" in how it ties into the platform controller.
So, just remove it for now. It's not needed, no one uses it, and it's a
stumbling block in getting the greybus core code merged out of the
staging tree. If anyone wants it in the future, reverting this patch is
a great place to start from.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the control-protocol disconnecting operation a "core" operation.
This is needed to be able to use the operation in the new connection
tear-down sequence of control connections, which moves disconnecting
after the flush barrier.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove some no-longer-needed braces around an error path.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Its a special quirk just for the bootrom as it doesn't have any PM
operations implemented. As the greybus bootrom bundle driver doesn't try
to do any PM stuff, this quirk is used only to skip bundle activate
operation currently.
Rename the GB_INTERFACE_QUIRK_NO_PM quirk to
GB_INTERFACE_QUIRK_NO_BUNDLE_ACTIVATE to suit its purpose better as the
GB_INTERFACE_QUIRK_NO_PM will be used for other quirk now.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The new power management specific operations added to the control
protocol do not print the bundle-id in the error messages and it is not
possible to identify which bundle-id the operation failed for.
Fix that and do minor rewriting of the print messages to make them more
readable.
Tested on EVT 2.0 with gpbridge-test module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We always knew backward compatibility with the ES3 bootrom, which was
finalised about a year ago, would be a pain. Here we go again.
The bootrom does not support control requests added after it was burnt
into ROM for obvious reasons. This means that we need to suppress
sending the new bundle_activate() operation to any interface executing
the legacy bootrom.
Do so by adding a new NO_PM interface quirk (we can use the
control-protocol version for this later once we bump it).
Note that the interface-disable path (e.g. for power down) is already
handled by the FORCED_DISABLE quirk, and that the suspend/resume
paths are currently avoided by making sure that the bootrom bundle
never suspends.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Adds function calls for handling control connection suspend and resume,
for now all they do is disable and enable control connection.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Add the AP implementation for the Greybus Control Hibernate Abort
Operation. AP may use this Operation to abort a previous Control
Interface Suspend or Control Interface Deactivate Prepare Operation.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Add the AP implementation for the Greybus Control Interface Deactivate
Prepare Operation. AP uses this Operation during the Power Down
transition to request the bridge to power down after it detects a
subsequent UniPro link hibernation.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Add the AP implementation for the Greybus Control Interface Suspend
Prepare Operation. AP uses this Operation during the Suspend transition
to request the Interface to enter a low-power mode after it detects a
subsequent UniPro link hibernation.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Add the AP implementation for the Greybus Control Bundle Deactivate
Operation. This operation requests a Bundle to enter the BUNDLE_OFF
state. All Connections associated with the Bundle must be closed prior
sending this operation.
Add the AP implementation for the Greybus Control Bundle Activate
Operation. This operation requests a specific Bundle to transition from
the BUNDLE_OFF state to the BUNDLE_ACTIVE state.
[elder@linaro.org: fixed a typo pointed out by Johan]
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Add the AP implementation for the Greybus Control Bundle Suspend
Operation. This Operation is used to request a Bundle to enter the
BUNDLE_SUSPENDED state, all Connections associated with this Bundle must
be closed before issuing this operation.
Add the AP implementation for the Greybus Control Bundle Resume
Operation. This operation request a specific Bundle to transition from
the BUNDLE_SUSPENDED state to the BUNDLE_ACTIVE state.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
The operation layer allows only the 'core' operations on a connection,
which is in its 'disconnecting' state.
Mode switch is sent at the very end of interface-disable sequence, and
the control connection is already in its 'disconnecting' state at that
time. And so gb_operation_get_active() always fail with error -ENOTCONN.
The operation core already has support for such 'core' operations, just
that we were missing the needed flag while creating the mode switch
operation.
Fix that.
Tested on EVT 1.5 with gpbridge-test module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Karthik Ravi Shankar <karthikrs@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a generic interface for bundle drivers to use to request that a
mode switch is carried out on its behalf.
Mode switching involves tearing down all connections to an interface,
sending a unidirectional mode-switch request, and waiting for a mailbox
event that triggers deferred control connection reset and re-enumeration
of the interface. In case of a timeout waiting for the interface mailbox
event, or on other errors, the interface is powered off.
All of this needs to be done by core from work-queue context in order
not to block incoming SVC requests and bundle-device tear down. Care
must also be taken to serialise against concurrent module removal events
and eject requests.
Special handling of legacy mode-switching is also added in order to
continue to support the ES3 bootrom.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Print an informative error message in case sending the mode-switch
request fails.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement the new disconnecting control operation needed for proper
connection tear down.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add new helper to disable connections to interfaces that have already
been disconnected (e.g. forcibly removed).
The connection tear-down procedure differs enough depending on whether
the interface is still present or already gone to warrant a dedicated
helper. This will become more obvious with the new tear-down procedure,
which involves I/O on the connection being tore down.
This also simplifies handling of the legacy bootrom, which does not
support the new tear-down operations.
Specifically, this allows us to remove the early control-connection
tear down during interface disable, and also avoids some error messages
currently printed during legacy mode switch (i.e. bootrom
boot-over-UniPro) and forcible removal.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The count field is redundant and unused. Drop it from the control
timesync_authoritative command.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_control_timesync_get_last_event() sends a request asking for the
FrameTime at the last SVC strobe event. The responding entity returns the
FrameTime in the response phase of the request. Performing this operation
to an Interface after previously:
1. Synchronizing time using timesync-enable/timesync-authoritative
2. Sending an SVC_TIMESYNC_PING
will return the FrameTime of the responding entity at the SVC-ping. If
this command is sent before synchronization has been initiated or
successfully completed the responding entity should return an error
code.
- control.c::gb_control_timesync_get_last_event(u64 *frame_time)
Returns the FrameTime at the last SVC_TIMESYNC_PING to the AP Module.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit b957ade7b3e4ab8c149c53346dbf02e977b7f3a7.
The interface version is now managed as part of the firmware-management
protocol. This operation is already removed from the greybus
specifications.
Drop interface version support from greybus.
Tested with gbsim (sysfs file not available after this patch).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement the unidirectional mode-switch operation.
This operation will be used in the implementation of the new generic
mode-switch functionality.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Return an error pointer when failing to create a control device.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The control device is an abstraction of the control connection over
which a greybus manifest is retrieved. As interfaces switch modes (e.g.
after boot-over-unipro) they expose new manifests, which can contain
different vendor and product strings.
Eventually control devices will be deregistered and recreated after an
interface mode switch, while the interface itself remains registered.
Note that only interfaces of type greybus will have control devices.
Specifically, dummy interfaces will not.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make sure to register also the control device along with any bundles
when registering an interface.
Note that we currently ignore failures to register the control device
just as we do for bundle devices.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make the control object be a greybus device.
The control device will be used to expose attributes specific to
greybus-type interfaces.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move the timesync-operation functions above the control-object
management functions, which is where all other operation implementations
reside.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A number of data in TimeSync command structures are declared __u64/__u32
instead of __le64/__le32, I forgot to put this through an x86_64 compile
before presentation for merge and as a result didn't catch this error. This
patch fixes.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up handling of the ES3-bootrom quirks by adding an interface
quirk-flags field that is set appropriately when we detect that the ES3
bootrom is running.
Note that we need to reserve the DME_DIS_UNIPRO_BOOT_STARTED and
DME_DIS_FALLBACK_UNIPRO_BOOT_STARTED status values for the ES3 bootrom,
which does not support any CPort features (unlike later boot stages).
Add a BOOTROM infix to the defines to make this more clear.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This converts all drivers to use the gb_connection_get_data() and
gb_connection_set_data() functions to make it a bit more explicit as to
what is going on.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.
Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
u32 strobe_delay, u32 refclk)
Informs an Interface to expect count TimeSync strobe pulses with
strobe_delay milliseconds delay between each strobe. Once enabled
an Interface may not enter a low-power mode which will result in the
reference timer used to track time switching off.
- control.c::timesync_disable(void)
Commands an Interface to immediately halt TimeSync logic. This will allow
an Interface to transition into low-power modes where the reference time
being used for TimeSync may switch off.
- control.c::timesync_authoritative(u64 *frame_time, u8 count)
Used by the AP Module to inform an Interface of the authoritative
TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
shall adjust their local frame-time appropriately based on the
diseminated authoritative frame-time.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_control_get_version() is not used outside of the file and must be
marked as static. Following sparse warnings are reported today:
greybus/control.c:20:5: warning: symbol 'gb_control_get_version' was not declared. Should it be static?
Fix it by marking gb_control_get_version() 'static'.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Return an ERR_PTR on errors when creating connections.
This allows driver probe to fail with a more informative error message
as not all connection creation errors are due to memory exhaustion.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add dedicated helper to create control connections.
This will allow us to simplify the generic (dynamic) interface.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add bundle-version operation to fetch the version of the bundle class.
Retrieve the bundle version of all bundles when initialising the
interface in case the control-protocol version is greater than 0.1.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Drop dependency on the legacy protocol abstraction.
Instead implement the protocol-specific version request directly, and
use the new interface for managing the control connection.
Note that the version request is being removed from most protocols, but
we need to keep the current request for the control protocol as-is
indefinitely to maintain backwards compatibility (e.g. with the ES2/ES3
bootrom).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove control-protocol version from the exported protocol definitions
as it is an implementation detail that makes no sense to export.
Currently gbsim uses the kernel's control-protocol version definitions
directly instead of reporting the version of the protocol it actually
implements.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove the legacy protocol flags that were used to suppress the
connected and disconnected events.
Instead send the connected and disconnected event for all bundle
connections and explicitly exclude static connections and control
connections.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename legacy connection init and exit functions.
This is a step towards removing the legacy-protocol handling from core.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The version of the currently running firmware on the module is useful
for userspace as it can be used to find if an update is available or
not. This patch fetches interface's version with a new control operation
and exposes the same in userspace.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We already have macro's defined for this, use them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up control-connection handling by managing it through the control
structure and a higher-level control interface. Also make both the
control structure and connection lifetimes coincide with that of the
interface.
The control connection is now only enabled and disabled when the
interface is initialised and removed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The control bundle is going away so update the code.
Also remove defensive WARN_ON which would not just warn if our
implementation is broken, but also leak further memory unnecessarily.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove request handler for control protocol that makes no sense as we do
not have any incoming control requests defined.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We are removing struct device from the gb_connection structure in the
near future. The gb_bundle structure's struct device should be used as
a replacement.
This patch moves the control code to use the bundle pointer instead
of the connection pointer for printing out error messages.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
This helps in removing special per-protocol code, with the help of
generic flags passed by protocol drivers.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Response allocation also needs a GFP-flags argument as a response is
allocated as part of an outgoing operation.
Fixes: 9aa174d202e5 ("operation: allow atomic operation allocations")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to write simple init/exit routines, use
gb_builtin_protocol_driver().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add control protocol driver that is responsible for handling operations
on control CPort. The AP also needs to support incoming requests on its
control port. Features not implemented yet are marked as TODO for now.
NOTE: This also fixes cport-bundle-id to 0 and cport-id to 2 for control
protocol.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
